128,264 used machines on RESALE, but how to find them? Machine Search
clamping plate: 595 x 445 mm drawing length: 400 mm stroke: 400 mm weight of the machine ca.: 1.600 t dimensions of the machine ca.: 1.400 x 1.200 x 1.500 mm Minimum/maximum cutting speed: 0 - 20 m/min Minimum/maximum return speed: 40 m/min Maximum workpiece diameter according to DIN6885 (bore): 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General SKU332X715 MakeKörting Hannover Mach.No.210-4-32860-3 Year of construction2014 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell0.5 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Main Features MaterialStainless steel Shell (Material)Stainless steel Tube (Material)Stainless steel Volume235000 Ltr. Motor5.5 KW Specified Features - Vacuum pump MaterialStainless steel 1.4571 (316Ti) Pumpcheck Number of pumps:1 Capacity235 m³/h With motor5,5kW, 400/690V, 1450 rpm, (Ex) InletDN50 OutletDN50 Vacuum pumps Heat exchangercheck Horizontalcheck Tube capacity60 l. Number of tubes:64 Tube diameter17 mm Tube length2200 mm Max. temperature0°C/+80°C Shell diameter300 mm Shell length2400 mm Max. temperature0°C/+185°C Shell connectionsDN40 Cover connectionsDN80 Information Mounted on framecheck LocationBarneve ...
pressure: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: MAN Model: E2848 LER 322 Year of Commissioning: 2015 Power output: approx. 250 kW Find more here - / Contact us at -
cutting width: max 610 mm Cutting height: max 200 mm Saw blade diameter: 650 mm Motor output: 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Press modul for production of CLT panels. Used for test production of different CLT and hybrid panels.
1 Wagner Leopard 3570 airless sprayer with air piston drive. It is for hanging on the wall. About 8m of spray hose are included, and a gun with nozzles, filters, etc. For data see type plate Technical data: Gear ratio: 35:1 Max. air inlet pressure: 7.1 bar Max. working pressure: 250 bar Volume flow rate per double stroke: 70 cm³ Max. stroke rate: 60 DH/min Max. flow rate: 4.2 l/min The system was in operation until recently, is well maintained and perfectly cleaned. Pick-up only in 27404 Zeven.
Leutenegger (Starrag) Wash Box Technical data Bathroom capacity: approx. 0.9 m3 Chemistry: Henkel P 3 Voltage: 3x400V/230V 50 Hz Supply line: 40 A Control voltage: 24 V DC Temperature max: 50° C Electric heating Heating capacity: 3x3.25 kW = 9.75 kW Work pump: 3 kW Exhaust fan: 0.37 kW Exhaust air volume: 400 m3/h Data sheet at this link Shipping costs on request More items - new and used - can be found in our shop! International shipping costs on request
This 5s LEADERMAC Compact LMC-530C was manufactured in 2022. It features a working width of 15 â 300 mm and a working thickness of 10 â 150 mm, making it suitable for various woodworking applications. With multiple spindles and a Schneider 5.7â EASYSET touchscreen control, this machine offers advanced capabilities. Consider the opportunity to buy this LEADERMAC Compact LMC-530C wood planer. Contact us for further details.
General SKU409X1297 LocationBarneveld CEcheck Specified Features - Miscellaneous CapacityMax. Irradiation intensity up to 3.000 mW/cm2 Motor100-240 volt CapacityWavelength: 365,385,395,405 and 460 nm Information MakeHonle TypeLed Cube 100 Floor space1,00x0,40 m Total height0,45 m Weight25 kg Extra SpecificationsWith 3x UV chambers, type led cube 100 with led spot, chamber size 195x186x195 mm, : 1x powerdrive, type 120 MiscellaneousDr. HönleMiscellaneous > MiscellaneousBrand > Dr. Hönle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU413X1253 MakeF.B. Lehmann LocationBarneveld CEcheck TypeVSEF Main Features MaterialStainless steel Surface1.77 m2 Sizes diameter1500 mm Specified Features - Vibro sieve MaterialStainless steel 1.4301 (304) Vibro sievecheck Sieve surface1,77 m² Number of sieve decks:2 Sieve sizesø 1500 mm With covercheck Inletø 240 mm, 3x ø 150 mm Outletø 200 mm Drive vibro motorcheck Motor3,20 kW, 400 V 1470 rpm Sieve perforationø 20 mm: 0,5 x 0,5 mm Information No.011542 Year of construction1997 Mounted on mild steel framecheck Floor space2,20 x2,20 m Total height1,60 m Weight750 kgVibro sievesFb LehmannSieves > Vibro sievesBrand > Fb Lehmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Net ...
General SKU416W1314 LocationBarneveld CEcheck MakeLessine Main Features Motor7.5 KW Inlet diameter100 mm Width100 mm Specified Features - Pin Mill MaterialStainless steel 1.4306 (304L) Pin Mills Pin disc millcheck Rotor size270 mm Grinding room size320 mm Number of pins on house side:45 Number of pins on door side:100 Pin diameter12 Housing dimensions Dia. 400 mm InletDia. 100 mm Motor7,5 kW (400 V, 1470 rpm) Speed3000 rpm Information TypeEL 100 No.21-1132 Year of construction2021 Mounted on framecheck Floor space0,70x1,30 m Total height0,70 m Weight500 kgPin MillsLessineMills > Pin MillsBrand > Lessine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld f ...
General SKU359W977 LocationBarneveld CEcheck MakeLeistritz Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm MaterialStainless steel 2.4819 (Hastelloy C-276) Information TypeZSE 27 HP-PH-40D Mach.No.3659 Year of construction2007 With switchgearcheck Floorspace3,65 x 1,15 m Total height1,80 m Weight1200 kg Extra Specificationsthis unit comes with: - control cabinet. - 3x temperature control units. - extruder barrel lift Double screw extrudersLeistritzExtruders > Double screw extrudersBrand > Leistritz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compare ...
Various used Lenze frequency converters available Tested before delivery (or preset to your engine)
Reference Num.: 4408 Brand: RMGT Type: 970ST-5+LED Construction year: 2022 Available: directly Status: In production Location: USA Printing units: 5
Unused alubit grinding balls (alumina ceramic) designed for wet grinding (continuous operation), available in the following sizes and quantities: 1 1/4'' (32 mm) [1,000 kg]; 1 1/2'' (38 mm) [990 kg]; 2'' (50 mm) [700 kg]; 1 3/4'' (45 mm) [940 kg]; 2 1/2'' (64 mm) [1,970 kg]. All balls made in Italy, packed in 25 kg bags.
Unused alubit grinding balls (alumina ceramic) designed for dry grinding (batch and continuous operation), available in the following sizes and quantities: 1 1/4'' (32 mm) [960 kg]; 1 3/4'' (45 mm) [1,580 kg]; 1 1/2'' (38 mm) [940 kg]; 2'' (50 mm) [410 kg]; 2 1/2'' (64 mm) [580 kg]. All balls made in Italy, packed in 25 kg bags.
Lehmann EA-407.1A CNC 4th Axis – Rotary Table – Fully Functional The Lehmann EA-407.1A CNC rotary axis is designed for CNC machining centers. It enables precise positioning and multi-sided machining of workpieces without the need for re-clamping. I have 5 pieces for sale, if you buy more, the price will be better.
This 3-axis Leadwell V-40 was manufactured in 1996. It features a BT40 spindle, a 20-tool automatic tool changer, and a maximum spindle speed of 8,000 rpm. External coolant is provided at 2 bar. If you are looking to get high-quality milling capabilities, consider the Leadwell V-40 machine we have for sale. Contact us for more information about this machine.
General SKU241P271 MakeLEWA TypeLDB 1 Mach.No.472685-020.002 Year of construction2005 Pressure Working pressure77 Bar Main Features MaterialStainless steel Motor0.18 KW Specified Features - Dosing pump Pumpecoflow diaphragm metering pump Capacity1.74 Ltr/h With motor0.18 KW 230/400 Volt (Ex II2G c IIC T1-T4) With variable speed drivecheck Inletdia.5mm Outletdia.5mm Information LocationBarneveld Floorspace0,5x0,3 m Total height0,5 M Weight40 KG Extra Specificationsused for vinylacetate Dosing pumpsLewaPumps > Dosing pumpsBrand > Lewa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
This CB Levigatrici NV11.RRT belt sander was manufactured in 2006. It features a maximum working width of 1100 mm, operates on 400 V / 50 Hz, and has a total power of 48 kW. Weighing 2460 kg, its a robust choice for your sanding needs. Consider the opportunity to buy this CB Levigatrici NV11.RRT belt sander. Contact us for more information about this machine.
General SKU254S226 LocationBarneveld MakeHauck (USA) TypePBG 1000E-EE-VA-A air heater Main Features MaterialMild steel Specified Features - Miscellaneous MaterialMild steel Information Year of constructionUnknown Floor space4,3x2,2 M Total height2,1 M Weight2100 Kg Extra SpecificationsGas burner Hauck (USA), type: PBG 1000E-EE-VA-A, capacity 230 kW, type of gas: natural gas: With fan, brand: Karl Klein type: EMV 330/S (110 deg C), 110 m3/h: With 4x air blowers: 0.25 kW 230/400 Volt and with air heater: Leister LE 10000 HT 15kW + spare air blower. With board cabinet (as is). MiscellaneousHauck (USA)Miscellaneous > MiscellaneousBrand > Hauck (USA) What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pl ...
General SKU011C013 MakeLeistritz TypeZSE-110 Mach.No.86.02.1822 Year of construction1986 Sizes Screw diameter110 mm Main Features Motor110 KW Inlet diameter110 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter110 mm L/D20 Counter rotatingcheck Number of heating zones:4 Electric heatingcheck DC-motor10-110 KW Information LocationBarneveld With switchgearcheck Sizes switchgear120 x 70 x 230 cm Floorspace4,7 x 1,4 m Total height2,2 mDiscountDouble screw extrudersLeistritzDiscountExtruders > Double screw extrudersBrand > Leistritz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU241P261 MakeLEWA TypeLCA Mach.No.533537-030.001 Year of construction2011 Pressure Working pressure30 Bar Main Features MaterialStainless steel Volume21.39 Ltr. Motor0.18 KW Specified Features - Dosing pump Pumpecosmart diaphragm metering pump Capacity21,39 Ltr/h With motor0.18 KW, 230/400 Volt (II2G c IIC T1-T4) Inletdia.8mm Outletdia.8mm Information LocationBarneveld Floorspace0,40 x 0,30 M Total height0,50 M Weight30 KG Extra SpecificationsPistion dia.14mmDosing pumpsLewaPumps > Dosing pumpsBrand > Lewa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU241P268 MakeLEWA TypeLDB 1 Mach.No.472685-020.001 Year of construction2005 Pressure Working pressure77 Bar Main Features MaterialStainless steel Motor0.18 KW Specified Features - Dosing pump Pumpecoflow diaphragm metering pump Capacity1.74 Ltr/h With motor0.18 KW 230/400 Volt (Ex II2G c IIC T1-T4) With variable speed drivecheck Inletdia.5mm Outletdia.5mm Information LocationBarneveld Floorspace0,5x0.3 M Total height0.5 M Weight40 KG Extra Specificationsused : for peroxyde Dosing pumpsLewaPumps > Dosing pumpsBrand > Lewa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU201P044 MakeFIB Industries B.V. Leeuwarden No.730406-01 Year of construction2012 LocationBarneveld Pressure Working pressure3.5 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume13500 Ltr. Pressure6 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4404 (316L) Capacity13.500 Ltr Vessel sizesdia.2000x3525mm Dished topcheck Dished bottomcheck Manholedia.600mm Top connectionsdia.150mm, dia.80mm, (3x)50mm, (2x)40mm. dia.20mm Outletdia.50mm Max. temperature280 Degr.C. With jacket(1500 Ltr) Information Floorspace2,6x2,6 M Total height+/- 5.,0 M Weight7500 KGPressure vesselsFib LeeuwardenTanks > Pressure vesselsBrand > Fib Leeuwarden What you can expect from Foeth: -- Machine is in working condition -- At a reduced ...
Used Used labeller Newtec Leopard 6.000 bph: Year: 2015 Condition: Good Used labeller NEWTEC ? 9T S2 E2 AD S1 E1 Year: 2015 Speed: 6.000 bph Direction: Counterclockwise Nr.2 could glu stations Nr.1 adhesive stations Safety protections. Code: EA 318 More details: https://bottlingscout.com
400 V, with constant temperature control, with adjustable air volume and digital display for the air volume. For 40mm overlap with Cekom plug, with tension indicator, incl. wooden box. Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working width: 40 mm Weight: 57 kg Colour: green Dimensions: 740 x 480 x 470 mm Machine number: 1501221760
Size 60 x 75 cm, Presscenter XL 2, Programm controlled wash up device for Inking rollers Blanket wash and Impression cylinder wash, Alcolor Vario dampening, Combistar Aircooled cooling and recirculation device, Autoplate, Antistatic device in feeder, Double sheet detector, Weko AP 262 powderspray, AMS LED UV dryer, Maximum paper thickness 0.8 mm, Maximum speed 15.000 s/h, Perfecting 2-3 or 5-0 Machine nr: LS001665, impressions: 65 million
Lealde Valvecenter-5V CNC turning and drilling center Year 1997 designed specifically for valve bodies (oil & gas valves, pipeline valves, etc.). It performs turning, drilling, and machining of valve components in one setup.  Used mainly in valve manufacturing plants and heavy machining shops. Maximum swing over longitudinal guides: 1000 mm Maximum swing over cross guides: 700 mm Main spindle nose: DIN 55021 – Form B Spindle through-hole diameter: 139 mm Front spindle bearing diameter: 200 mm Maximum spindle speed: 1000 rpm Maximum spindle torque: 3434 Nm Axis Rapid Traverse • W axis: 20,000 mm/min • X / X1 / X2 axes: 17,400 mm/min • Z axis: 15,000 mm/min Travels Turning slide – transverse travel: 1250 mm Drilling slide – longitudinal travel: 1350 mm Drilling slide – transverse travel: 135 + 135 mm Motors Main spindle motor power: 4 ...
Lealde Valvecenter-5V CNC turning and drilling center Year 1997 designed specifically for valve bodies (oil & gas valves, pipeline valves, etc.). It performs turning, drilling, and machining of valve components in one setup.  Used mainly in valve manufacturing plants and heavy machining shops. Maximum swing over longitudinal guides: 1000 mm Maximum swing over cross guides: 700 mm Main spindle nose: DIN 55021 – Form B Spindle through-hole diameter: 139 mm Front spindle bearing diameter: 200 mm Maximum spindle speed: 1000 rpm Maximum spindle torque: 3434 Nm Axis Rapid Traverse • W axis: 20,000 mm/min • X / X1 / X2 axes: 17,400 mm/min • Z axis: 15,000 mm/min Travels Turning slide – transverse travel: 1250 mm Drilling slide – longitudinal travel: 1350 mm Drilling slide – transverse travel: 135 + 135 mm Motors Main spindle motor power: 4 ...
Two brand new and unused Lenze gear motors are available. 1) Lenze GSS06-2, Power: 5kW, Speed: 1450rpm, Torque: 445Nm, Ratio: 20:1, Efficiency: IE3, Duty type: S1, Insulation class: F. 2) Lenze GSS06-2M VAR 112C22, Power: 4kW, Speed: 1450rpm, Torque: 444Nm, Ratio: 20:1, Efficiency: IE2, Duty type: S1, Insulation class: F. Documentation available. An on-site inspection is possible.
Horizontal strapping machine with side presses, good condition, plant is configured for plastic and steel strapping
sheet width - max.: 5-150 mm sheet width - max.: 5-150 mm coil weight: 2,0 t coil weight: 2,0 t Belt thickness: 0,2-1,5 mm Belt thickness: 0,2-1,5 mm band speed: 0-20 m/min band speed: 0-20 m/min driving torque: 290 Nm driving torque: 290 Nm table-size: 1500 mm table-size: 1500 mm Control: Siemens-Leicht Control: Siemens-Leicht range L-W-H: 2.000 x 1.500 x 1.900 mm total power requirement: 0,75 kW total power requirement: 0,75 kW weight of the machine ca.: 0,6 t weight of the machine ca.: 0,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Forklift hydraulic/manual operations, max load wight 600 kg
Key features: Model: TEUPEN LEO 12T Year: 2007 Working height: approx. 12 m Basket capacity: 120 kg (1 person) Machine weight: 3050 kg Permissible wind: 12.5 m/s Maximum lateral load: 400 N Power supply: 230 V – 50 Hz – 16 A Machine Status: The boom lift works properly and is operational for work at height. Note: The battery does not hold a full charge. It works, but possibly need to replace or overhaul the battery.
(1976) 250t Berrenberg-Pressen Eccentric Press Heavy-Duty Eccentric Press for High-Capacity Industrial Forming This Berrenberg model is a powerful mechanical press engineered for high-tonnage applications, featuring an impressive 640 mm shut height to accommodate large and complex tooling setups. Technical Details Machine Type: Eccentric Press Manufacturer: Berrenberg Pressen Model: LEPr 250 355 Year of Manufacture: 1976 Nominal Capacity: 250t Stroke Rate: 45 strokes/min Ram Stroke (Adjustable): 40 – 180 mm Ram Adjustment: 80 mm Shut Height (Die Space): 640 mm Overrun Time (Stopping Time): 0.152 seconds Safety Distance: 284 mm Motor Power: 18.5 kW
Dimensions: 3.5 x 7m, Electricity: 9x 230v sockets and one 16A socket, Light: available, shatterproof (food standard), Ventilation: Large, professional ventilation system with filters. Supply air damper also with filter. Additional insulated exhaust duct for connecting a portable air conditioner (not included)., Sink/Water: Mobile sink from Calosy with shower, hot water, tanks for fresh water and waste water., Floor: Currently directly on the hall floor. Custom flooring can be installed if the existing hall floor is unsuitable., Door: 118cm wide, also fits wide pallets., Materials + surfaces: Clean room made of wood (solid carpentry), stainless steel surfaces, easy to clean., Upper floor + stairs: accessible, storage and workstations possible, stairs approved by the employers liability insurance association (steepness, height, steps)., General standard: 100% food-safe; this room was prod ...
turning diameter: 2400 mm turning length: 6000 mm control: Siemens 880T Turning diameter over slide: 1400 spindle diameter: 320 mm speed: 0.4 - 1000 m/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Sandvik Model: Leopard DI650i Type of Machine : DTH Surface Drill Rig UNIT 1 - Year of manufacture: 2020 - Total engine hours: 19,041 - Engine replaced | Hours on new engine: 7,700 - Drilling hours: 7,355 UNIT 2 - Year of manufacture: 2021 - Total engine hours: 18,608 - Engine replaced | Hours on new engine: approx. 5,422 - Drilling hours: 7,443 Technical Details : - Drilling method: Down-The-Hole (DTH) - Hole diameter range: 115 to 229 mm (4.5 to 9.0 in.) - DTH hammer: Sandvik RH570 (4, 5 and 6 in.) - Flushing air capacity: 28.3 m3/min at 24 bar - Drill rod/tube diameter: 89, 102, 114, 127 and 140 mm (3.5, 4, 4.5, 5 and 5.5 in.) - Rotary head: MRH6 - Engine type: Caterpillar C15 (Tier 3 / Stage 5, Tier 4F) - Engine output power: 403 kW at 1,800 rpm - Cabin: iCab - Production capacity: 2.1 Mt/a (one shift) - Transport height: 3.5 m (11.5 ft) - Weight: 25,100 kg (55, ...
3-piece consisting of connector FFS-00.250.CTCE31, apparatus box ERN.00.250.CTL, Anti-kink grommet Desmopan white type GMD.00.028.DB, Price for dismantled parts, Parts can also be purchased individually= Plug, Apparatus Socket, Kinking Protection Grommet, Request Single Price
A glass cutting machine Lenhardt with a Tränker automation and control is available. Strip width: 777mm, strip length: 2366mm. Documentation available. An on-site inspection is possible.
A Lenhard extruder for butyl rubber is available. Application: insulating glass production, material: thermoplastic butyl based on polyisobutylene, max. operating temperature: 140°C, max. butyl pressure: 140bar, max. hydraulic pressure: 150bar. An on-site inspection is possible.
Two like-new and partly originally packaged large-format vacuum angle valves Leybold are available. Deflection: 90°, nominal diameter: 800mm, max. operating pressure: 7bar. Documentation available. An on-site inspection is possible.
Nemo Pump Progressing Cavity Pump Lenze 12.622.10.4 - Details see pictures
Bread slicer / table model Lebema Orion Small Product description Manufacturer: Lebema GmbH Type: Orion Small Year of construction: 2014 Material: stainless steel Condition: used, functional, bakery condition Circular knife machine Manual operation via rotary control Bread dimensions max: 300 x 280 x 160 mm (LxDxH) Cutting thickness: 4-25 mm Cutting width adjustable For all types of bread Ideally suited for use in bakery branches and large kitchens Connection: 400 V / 50 Hz Outdoor dimensions B.: approx. 60 cm, D.: 70 cm, H.: approx. 60 cm For details, see pictures.
maximum number of results exceeded
please refine your search
