le used for sale

Leroy Somer LSA 461 M3 - Used - 150 kVa - Generator End

Polish Lathe / Polishing Machine Between points: 1500 mm Centre height: 180 mm Spindle CM3 Spindle speed driven by speed variator Pneumatic tailstock Equipped with a vaccum system (only air hose to plug in) Machine was used to polish axes Voltage: 220 V mono Dimensions (L x W x H): 3200 x 1000 x 1900 mm Weight: 1,2 T

De uitrusting bestaat uit: - 3 decoilerstations met een capaciteit van 5 ton - Ras richteenheid - Ras hoekuitsparingeenheid - Rashydr-unit voor het walsen van verstevigingsribben in het plaatwerk - Rasschaar voor het op lengte knippen - Ras vouwunit voor vierkante luchtkanalen

Sheet format: max. 1060 x 746 mm, min. 400 x 350 mm Equipment: Stripping station, depaneling, centerline, floor storage in depaneling station, Quick-Lock quick-release closing frame, max. machine speed 9,000 sheets/hour, max. die-cutting pressure 260 tons, processable materials: paper min. 70g/m², cardboard / solid board max. 1,000 g/m², corrugated cardboard up to 2 mm. Condition: Not operational Sale exclusively as spare parts donor Missing parts: Pumps, Grippers, Chain, Cube, Various Electrical Components Other: Machine can be visited by arrangement.

The machine is in good technical condition, a test run is possible by prior arrangement. Glass lining Ø 200 mm Oil separator Filtermist S800 (2 years old) Reducer sleeves, hard and soft jaws Clamping claws Renishaw button

Very compact cut to length and slitting line Single unit consisting out of: 1 - decoiler 5 ton, max diameter of coil: 1000 mm 2 - straightener 3 + 4 rolls, 90 mmnbsp;rolldiameter 3 - shear for cut to length 4 - slitting unit with 5 slitting knives 5 - operator cabinet with CNC control (frequency controlled)

Key data: 550 V

Gas Generation Unit with MAN E3262 LE202 Engine. Compatible with both natural gas and biogas. SCOPE OF SUPPLY •⁠ ⁠Engine •⁠ ⁠Alternator •⁠ ⁠Control panel Motortech All-in-One Vision 5 •⁠ ⁠Gas Ramp Technical documentation: Manufacturer's MAN datasheet, MAN Operating Instruction Manual. The engine has undergone borescope inspection, revealing all internal elements in well-preserved condition. Engine turns freely. The turbos have recently been overhauled. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

LEISTRITZ ZSE40HP, Co.rotating twin screw extruder, n.2 screws Ø 40 mm. 36 L/D, max screws speed 600 rpm, A.c.55 kw drive ca., 10 heating zones, Brabender dosing unit, single degassing pump, missing of screenchange - possible addition of fully automatic or semi-automatic screenchanger, 6-strand die head, It was running with ABS PP PE, Throughput rate up to 120 kg/h, Control cabinet with Siemens touch screen, Users manuals and electrical drawings available, Constructed in 2015, the line is offered reconditioned, availability: 6 weeks time, capacity: now 120 kg/h but depending on material, feeding rate and screw conditions, conditions: reconditioned, type: co-rotating compounder

PROBAT LE 3 3 kilograms electric with undercounter nostalgic shop roaster zu verkaufen / for sale PROBAT LE 3 3 kilo, electrical with wooden table, nostalgic shop roaster

Hydraulische 4 Plattenspresse - Hydraulic 4 Plates Press Lechner IV B

Hydraulische Presse / Hydraulic Press Lechner ST UST IASerial-No. 1438Year 1980

MG Tech Leanbox Case former Serial: HO2859 2018, Leanbox case former, 1250mm loading height, 600mm capacity cardboard, currently set for 385mm x 385mm form punch, up to 20 boxes per min, touch screen controls, max blanks 750mm x 750mm, 3Ph

CAMAM orbital sander mod. LEC250 – CE compliant - With feeds - Matr. 11 - Year 1996 - Working dimensions min/max. 30/150 mm. - Min. radius of curvature mm. 250

Numbering units Leibinger Gradsteller / Quersteller / Forwards / Backwards xx099-1 Numbering Units Leibinger Gradsteller rückwärts / straight Backwards xx099-2 Numbering Units Leibinger Gradsteller vorwärts / straight Forwards xx099-3 Numbering Units Leibinger Quersteller rückwärts / convex Backwards xx099-4 Numbering Units Leibinger Quersteller vorwärts / convex Forwards

Size: Equipments: Vertical stack delivery with pressing station Good condition

Drive motor, DC servo motor LENZE type GFQUBT 112-22Spindle motor, electric motorSeries No. 0239398K Year of manufacture: 1993Nominal power: 6 kWook voltage: 400 DCNenncurrent: 18 ampereMaximum speed: 1000 rpm. Excitation voltage: 210 VDCEexciter current: 3.4 ampereShaft diameter: 38 mm (shaft with 10 mm key)Shaft length: approx. 76 mm (shaft protrusion from centering edge)Centering flange diameter: 230 mmBolt circle diameter: 264 mm, 4x 14 mm holesLonglife speedometer HÜBNER type TDP 0.2 LT-4Speedometer voltage: 60V / 1000

Universal face and boring head LENZ type LPA 1SSpindle tool, spindle head similar to WOHLHAUPTER UPA3Tool holder: SK 40 - M16Adjustment accuracy: 0.01 mm- Accessories as shown- Storage boxWeight: approx. 5 kggood condition; used

Power generators with heat extraction Engine type: MAN D2840LE21 Power: 450 kVA Year: 1996 Hours: 13765 Cooling: Water Speed: 1500 1/min Generator: Marelli MJB 315 Mb34 Voltage: 400/231 V, 50 Hz General overhaul October 2023 by a specialist company, then no longer used. Subject to prior sale - errors possible! Internal reference number: E-1004-101

Nominal pressing force ... 100t Table dimensions ... 1000 x 640mm Stroke adjustment ... 125mm Plunger adjustment ... 90mm Number of rams ... 75-150 rpm Main engine power ... 6/10kW L x W x H ... 1725 x 2230 x 2970mm Mechanical weight ... 10100kg

1 of used gearbox, Lenze type 52.162.06.000, ratio I=15,53. Overhauled with new bearings, seals, oil, silent block and spider.

1 of used gearbox, Lenze type 52.162.06.00, ratio I=10. New 1994. Overhauled with new bearings, seals and oil.

1 of used gearbox, Lenze type 52.110.10.14, ratio i=15. Example pictures only. Various mounting bracket versions available. Enquire for details.

1 of used gearbox, Lenze type GKS04-3 N HBR 1C, i=16,087. Overhauled and fitted with new seals (except output side) and oil (CLP 460).

1 of used gearbox, Lenze type 12.602.12.6.4, ratio i=6.3. Can also be supplied in overhauled condition. Enquire for details.

1 of used gearbox, make Lenze, type GKS04-2 N HBR, 0804, A 000, 81 NM, 171,2 r/min, CLP 460, i = 8,178.

Dosing pump with 90 l/h flow rate Properties: Length 370 mm Width 200 mm Total height 430 mm Volume 90 L Engine power 0.43 kW Manufacturer: LEWA ecodos Manufacturer Serial No. EEK 0090 S11

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: LECHNER Maschinenbau e.K. Type: 3100/110 Year of Make: 2020 Voltage: 400V Power consumption: 1.5 kW Power connection: 3 phases, zero, PE Upper roller diameter: 60 – 100mm Maximum working length: 1100mm Nominal capacity: 3.2mm (sheet thickness) Feed: 5m/min All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".

Eccentric press LEK 160

The scope of delivery includes: 01x Lightweight water hose Material: Polyvinyl chloride (PVC) Material color: black Diameter: 12.7 mm (1/2 inch) Length: 20 m Suitable for up to 200 psi (13.8 bar) Robust, 3-layer construction Weight: 2.60 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Turntable diameter: 1650mm, turntable height: 65mm, mast height: 2560mm, max. load capacity: 2000kg, max. pallet dimensions X/Y/Z: approx. 1200mm/1100mm/2400mm. Machine dimensions X/Y/Z: approx. 2600mm/1650mm/2600mm, weight: approx. 550kg. Documentation available. An on-site inspection is possible.

Year: 2008 Impressions ca: 86 mil - Max Format: 375x520 mm - PCS-G: consolle for ink and register control with touch panel. Electronic control of double sheets. Electronic control of the sheet missing. Pointing tape sucked. Photocells. Automatic ink regulation from consolle. RyobiMatic-D: alcool dampening with variable speed. Refrigerator Technotrans. Automatic Washing of blankets, rollers and impression cylinders. Semi-RPC: Semiautomatic Plate Changer. Circumferential, assial and diagonal registers. Extended delivery. High pile delivery. Powder spray Grafix. LED UV Books and tools.

Max. punching force: 500kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 39kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 56,645h, with documentation. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.

Max. punching force: 300kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 11kVA, length: 4800mm, width: 3400mm, height: 2800mm, net/operating weight: 10/13t, operating hours: 2818h, with documentation. The control was renewed in 2022. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.

Max. punching force: 500kN, max. punching stroke: 200mm, die support dimensions: 13,200x1500mm, conveyor belt dimensions: 7435x1995mm, max. punching area: 1800x750mm, max. strokes: 80/min, connected load: 34kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 52,680h, with documentation. Equipped with extraction system, rotatable tool enabling nesting, tension-free unwinding possible. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.

Key data: 4 , 240 mm, 130 mm

SPECIFICATIONS: Feed length: 2500 mm Machining width: 240 mm Processing height: 130 mm Spindles: Ø 40 mm Number of Spindles: 4 Shaft drive (2.9 kW) Installed power: 24 kW Voltage: 380 V CONFIGURATION OF THE SPINDLES: I bottom (5.5 kW) II right (7.5 kW) III left with electronic sideshift (7.5 kW) IV top (7.5 kW) EQUIPMENT: Complete with tools

This is a side seam wicket bag machine Lemo Intermat 850 STN-CP Knoter, production type: wicket bags for bread, chicken, diapers, toilet paper, hygiene products and other types of wicket bags, number of lanes: single lane / lane wicket, processable materials: LDPE, HDPE, PP and recycled extracts, sealing width (bag length): 120-450mm, draw length (bag width): 200-850mm, gripper arm length: 600mm, max. linear speed: 65m/min, output capacity: 140 knot bags/min, max. number of bags per stack: 250, drive system: PLC-controlled, operator interface (terminal), print mark control, servo motor drive, nip feed rollers, sealing bars. Attachments and accessories: bottom gusset (only bottom gusset included), handle unit, longitudinal sealer, pre-sealer, angle sealer, cross sealer, handle punch, photo cell for printed film, automatic one-step conveyor (index conveyor), handle hole punch, G-gusset uni ...

Inv. Num. : 8643 Type: LEK 250 Producer: ZTS Generated: GO Parameters: Compressive force: 250 t

Manufacturer: Leimbach Model: HP 2 Year of Manufacture: 1995 - Major revision and reconstruction 2006 by Recuperma - The press can also run semi-automatically. - No longer in Operation Specifications: - Package size: 400 x 400 mm - Press box: 1,900 x 1,000 x 400 mm - Filling opening: 1,240 x 940 mm - Power pre-compressor: 1,500 KN - Power final compressor: 2,250 KN - Drive: 1 x 75 kW - Production: approx. 100 packages/hour - Weight of system: approx. 27 tons Find more here - / Contact us at -

Technical specifications:, Length of the press: approx. 7,000 mm, Width of the press approx. 4,800 mm, Press height: approx. 1,700 mm, Package size: 400 x 400 x variable, Filling box size, Length: 1,200 mm, Width: 1,000 mm, Hopper opening: 2,000 x 2,000 x 1,200 mm, Total length of the press chamber: 1,900 mm, Press chamber width: 1,000 mm, Depth: 400 mm, Feed pressure 150 to., Finished print: 250 to, Sliding door: 25 tons, Main drive: 1 x 45 kW electric motor 380V/50Hz, 1 x 22 kW electric motor 380V/50Hz, Pumps: 1 x 3660 l/min. Rexroth 315 bar, 1 x 230 L/min. Rexroth 80 bar, Length of the press: approx. 7,000 mm, Height of the press: approx. 1,700 mm, length: 1,200 mm, width: 1.000 mm, Total length of press chamber: 1.900 mm, Wide press chamber: 1.000 mm, Depth: 400 mm, Finished print: 250 tons, sliding door: 25 to

Cantilever rack for light loads, single-sided, frame height 2m, shelf length approx. 3m, 50cm deep arms, 200kg per arm, hot-dip galvanized - new product - : Price ex location incl. loading: only 895.-€ (net), plus packaging and freight. Price per additional stand: 225.-€ (net) Price for transport on request! Manufacturer: Bruckamp Year of manufacture: New Type: Super Lightweight Set components: 4 stands with 5 arms / 3 panels with connections Stand distance: approx. 1m Total length of construction area: approx. 3m Shelf height: 2m Foot and arm depth: 500mm Robust construction – made from an IPE 100 with firmly welded arms at a distance of approx. 330mm. Load capacity per stand: 1,000kg Payload per arm: 200kg Incl. ground anchor Incl. stress shield Description: 4 stands with 1 m axial dimension as a set incl. screws. Key benefits: Easy to assemble  ...

Various accessories for saws in professional woodworking are offered - consisting of replacement profile cutter heads (partly from Leitz-Variform, as good as new and partly in original packaging). If requested, individual sales may also be possible. The accessories are currently located in Magdeburg and are being sold - due to a restructuring. Only the accessories offered are expressly sold, any items shown in the photos are expressly not part of the scope of the offer. The offer prices are to be understood as gross prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty. The offers are subject to change, subject to errors and subject to any prior sale. Our terms and conditions also apply to every sale, to which we expressly refer.

- 3 chuck 1200 mm - Heidenhain Digital read out syhstem X / Z Axis - Feeds in 2 directions - Multi fix Tool systems with inserts

- New hydraulics 2015 - Bed length 3540 mm - Stroke in X 1200 mm - Stroke in Z   300 mm - Speeds 18 steps from 6 to 675 Rpm

Witzig & Frank high-speed radial drilling machine LEO 32 AS Defects: (clamping no longer works, running noises present)

HDPE drain pipes 110 x 5.3 mm with a length of 6 meters Equipped with M and V part perrot/cardan mounted with heavy clamp, 60 pieces. sale without tubes container/pallet,, , = More information =, , Year of construction: 2023, , = More information =, , Year of manufacture: 2023, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Frid ...

Equipment consists out of: 1 - decoiler tower with 4 decoilers gt; capacity per decoiler: 3 ton

Manufacturer: LEINHAAS Model: AR11-160 RH 1 Year of Manufacture: 1991 Mains voltage: 3x400V / PEN / 50Hz Control voltages: 220V AC 50Hz / 24V DC Press connected load: 44 kW Total connected load: 55 kW Machine operating hours: 62,212.3 h Machine type: differential travel press Press force: 1300 kN Additional equipment : The strip feed system can also be purchased separately - Strip feed system from ALBA (Includes coiler, straightener, and roller feed) Find more here - / Contact us at -

Container Power Generators Engine: MAN Type: D2842 LE21 Year: 1995 Operating hours: approx. 3500 Generator: Leroy Somer LSA 47.1 L11 Last maintenance: January 2025, in use until August 2025. Incl.: Technical Documentation Subject to prior sale - errors possible Internal reference number: E-1004-103

Specifications: Tip height: 140 mm Turning length: 500 mm Accessories (included): Lunette Multifix "A" Collets 0.5 – 24 mm Milling device (Y-axis) 3-jaw chuck 125 mm Cs Urh Axexlr Hkszorh Face Plate 260 mm Running tip Chuck Die stock 4-jaw chuck Coolant pump Instruction manual (German)