We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,993 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
turning diameter over bed: 320 mm turning diameter over slide rest: 220 mm turning length: 600 mm turning diameter in the gap: 320 mm turning speeds: 60 - 1650 U/min centre height: 160 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK connected load frequency: 400 V total power requirement: 1,1 kW weight of the machine ca.: 340 Kg dimensions of the machine ca.: 1,4 x 0,75 x 0,7 m Center lathe with: 3-jaw chuck 160 mm. 4-jaw chuck 200 mm. Faceplate 200mm Fixed bezel Continuous bezel 4-way steel holder. Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Longitudinal and cross feed Complete coolant system Forage protection Set of change gears Machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning diameter: 720 mm turning length: 2000 mm control: 840D SL + ShopTurn Siemens greates pass round over bed: 720 mm swing diameter over face slide: 460 mm bed width: 433 mm turning speed range - main spindle: max. 2.500 U/min power capacity - main spindel: 18,5 kW spindle bore: 105 mm spindle head: D 1-8 diameter of quill: 100 mm taper of center: MK 5 quill stroke: 200 mm weight of the machine ca.: 6,1 t dimensions: 4,3 x 2,35 x 2,15 m Lathe cycle controled VDF BOEHRINGER - DUS 560 / 3000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning diameter over bed: 330 mm turning diameter over slide rest: 178 mm turning length: 1000 mm turning diameter in the gap: 450 mm turning speeds: 70 - 2000 U/min centre height: 165 mm spindle bore: 38 mm tailstock quill taper MT: 3 total power requirement: 1,1 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,9 x 0,72 x 1,4 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 mm turning diameter in the gap: 710 mm turning speeds: 36 - 1600 U/min centre height: 250 mm spindle bore: 103 mm tailstock quill taper MT: 5 MK tailstock travel: 150 mm tailstock quill diameter: 75 mm total power requirement: 7,5 kW weight of the machine ca.: 2,75 t dimensions of the machine ca.: 2,5 x 1,1 x 1,4 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 1000 mm turning diameter in the gap: 506 mm turning speeds: 45 - 1800 U/min centre height: 180 mm spindle bore: 38 mm tailstock quill taper MT: 3 total power requirement: 2,4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,2 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning diameter over bed: 330 mm turning diameter over slide rest: 210 mm turning length: 635 mm turning diameter in the gap: 480 mm turning speeds: 58 - 2500 U/min centre height: 167 mm spindle bore: 40 mm tailstock quill taper MT: 3 MK total power requirement: 2,2 kW weight of the machine ca.: 0,8 t Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning diameter: 500 mm turning length: 1250 mm control: 828D SL + ShopTurn Siemens greates pass round over bed: 500 mm swing diameter over face slide: 280 mm bed width: mm turning speed range - main spindle: max. 3000 U/min power capacity - main spindel: 9/13 kW spindle bore: 86 mm spindle head: diameter of quill: 100 mm taper of center: MK 5 quill stroke: 200 mm weight of the machine ca.: 2,5 t dimensions: 3,3 x 2,02 x 1,9 m Lathe cycle controled VDF BOEHRINGER - DUS 560 / 3000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning diameter over bed: 660 mm turning diameter over slide rest: 420 mm turning length: 2000 mm turning diameter in the gap: 840 mm turning speeds: 36 - 1600 U/min centre height: 330 mm spindle bore: 103 mm tailstock quill taper MT: 5 MK tailstock travel: 150 mm tailstock quill diameter: 75 mm total power requirement: 11 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 3,6 x 1,1 x 1,45 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning diameter over bed: 325 mm turning diameter over slide rest: 190 mm turning length: 500, 750, 1000 mm spindle bore: 32 mm turning dia. in gap: 440 mm spindle turning speed range: (12) 85 - 2000 U/min metric threading: (48) 0,1 -28 mm thread - inch: (53) 75 -2,5 inch. thread - module: (19) 0,1 - 1,75 Tpi Whitworth-thread: (19) 70 - 4 DP bed width: 200 mm spindle cone: gr. 5 number of feeds: 48 mm/U longitudinal feeds:: 0,006 - 1,77 mm/U face feeds: 0,003 - 0,888 mm upper slide-adjustment: 95 mm diameter of quill: 40 mm : gr. 3 quill stroke: 100 mm total power requirement: 2,2 kW weight of the machine ca.: 770 kg LZ lathe for industry and training Excellent quality in accuracy and stability, which has the consequence fstability a smooth running behavior is guaranteed and thus also a clean turning behavior. The machine is also reliable and easy to use. The CU 325 is ideal for small s ...
used
centre distance: 5000 mm turning diameter over bed: 4000 mm turning dia. in gap: 5000 mm spindle bore: 104 mm turning speeds: 1,4 - 71 (18x) U/min total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m 4-jaw face plate Ø 3.150 mm modular lathe! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter: 250 mm turning length: 450 mm control: TX8D bore: 80 mm spindle speed:: 3150 U/min. CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Please ask for further details. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Turning diameter: 630 mm Turning length: 0 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21i-TB MACH-id 4209 MAKE DOOSAN TYPE PUMA 280 M YEAR 2008 SPECIFICATIONS Swing over bed 630 Swing 500 X Axis 242 Z Axis 680 Controll Fanuc 21i-TB Tool changer 12 Chip conveyor Yes Swing over bed Ø 630 mm DIMENSIONS Length 4000 mm Width 2550 mm Height ...
used
Center height: 260 mm Center distance: 1000 mm Spindle bore: 62 mm MACH-id 4208 MAKE VDF Boehringer TYPE DUE 500 YEAR 2004 SPECIFICATIONS Swing over bed Ø 520 mm Swing over cross slide 315 mm Distance between centres 1000 mm Work piece weight 1500 kg Spindle bore 62 mm Spindle speeds / ranges 2240 Rpm Bed width 360 mm Power 11 Kw DIMENSIONS Length 3500 mm Width 1800 mm Height 1900 mm VDF bohringer DUE 500 Lathe
used
Center height: 260 mm Center distance: 1000 mm Spindle bore: 62 mm MACH-id 4207 MAKE VDF Boehringer TYPE DUE 500 YEAR 2004 SPECIFICATIONS Swing over bed Ø 520 mm Swing over cross slide 315 mm Distance between centres 1000 mm Work piece weight 1500 kg Spindle bore 62 mm Spindle speeds / ranges 2240 Rpm Bed width 360 mm Power 11 Kw DIMENSIONS Length 3200 mm Width 1800 mm Height 1900 mm VDF DUE 500 Lathe
used
Lacfer CR2-E250 rebuilt lathe. Distance between centers: 1.500mm. Swing: 530mm. Swing over carriage: 320mm. Swing in gap: 740mm. 16 speeds. (18-1.600rpm). Main motor power: 10hp. Spindle bore: 60mm. Equipped with universal chuck. Equipped with steady rest. CE certificate for european used machines.
used
Turning diameter: 600 mm Turning length: 1190 mm Turret positions: 12 CNC Brand: _Unknown / Other CNC Model: DMG MACH-id 4206 MAKE DMG TYPE NEF 600 YEAR 2009 SPECIFICATIONS Swing over bed 600 Distance between centres 1.190 Power kW liove tools 4500 Rpm X Axis 398 Controll Heidenhain CNC Pilot 4290 Tool changer 12 Chip conveyor Yes Swing over bed Ø 600 mm DIMENSIONS Length 3550 mm Width 2700 mm Height 1900 mm Chuck ROTA-S plus 315 DMG NEF 600 CNC Lathe with live tools
used
Parallel lathe NILES DLZ 400 IV Between points: 1000 mm Maxi Ø on bench: 420 mm Maxi Ø over saddle: 225 mm Spindle diameter: Ø 52 mm Spindle speed: from 45 to 2240 RPM 3-jaws chuck Ø 250 mm (interchangeable jaws) Threadings: Metric + Whitworth Tailstock: CM5 Rapid on X Lubricant pump Voltage: 380 V Length: 3000 mm Depth: 1500 mm Total height: 1600 mm Weight: approx 2,5 T
used
Benzinger TNL NCS1J Lathe Machine data of the manufacturer, deviations possible. Tip height: 80 mm max turning length 100 mm rotational diameter over. Bed 220 mm rotational diameter over. Flat sledge 140 mm max path length in x 300 mm max path length in z 240 mm Mains connection: 380 V 50 Hz All other technical data can be found in the link. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines
used
Benzinger TNL / TRP I automatic lathe Machine data of the manufacturer, deviations possible. Tip height: 80.5 mm max turning length 100 mm rotational diameter over. Bed 220 mm rotational diameter over. Flat sledge 130 mm max path length in x 300 mm max path length in z 240 mm Mains connection: 380 V 50 Hz All other technical data can be found in the link. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines
used
Turning diameter: 1600 mm Center distance: 10000 mm Spindle bore: 0 mm Numbers of bed guide ways: 0 Weight between centres maximum: 40000 kg MACH-id 3990 MAKE Poreba Poland TYPE TCG 160 YEAR 1995 SPECIFICATIONS Swing over bed Ø 1600 mm Swing over cross slide 1300 mm Distance between centres 10.000 mm Work piece weight 40.000 kg Spindle speeds / ranges 200 Rpm Bed width 1300 mm Power 75 Kw DIMENSIONS Length 15900 mm Width 2800 mm Height 2800 mm Poreba TCG 160 lathe, we ha ...
used
Center height: 200 mm Center distance: 1200 mm Spindle bore: 51 mm CNC Brand: Siemens MACH-id 3987 MAKE VDF Boehringer TYPE DUS 400 Ti YEAR 2007 SPECIFICATIONS Swing over bed Ø 420 mm Controll Siemens Swing over cross slide 230 mm Distance between centres 1200 mm Work piece weight 500 kg Spindle bore 51 mm Spindle speeds / ranges 3000 Rpm Power 11 Kw DIMENSIONS Length 3420 mm Width 1925 mm Height 1600 mm VDF DUS 400 Ti Teach in lathe
used
Turning diameter: 910 mm Turning length: 2000 mm Turret positions: 0 CNC Brand: _Unknown / Other CNC Model: Manuel Plus MAKE Gildemeister TYPE NEF Plus 710 YEAR 1995 SPECIFICATIONS Swing over bed Ø 710 mm Control MANUEL PLUS Swing over cross slide 420 mm Distance between centres 2000 mm Spindle bore 92 mm Spindle speeds / ranges 1800 Rpm DIMENSIONS Length 4250 mm Width 2200 mm Height 1900 mm Gildemeister NEF Plus 710 cnc lathe
used
Lathe PR-600. Distance between centers: 1000mm. Swing: 1200mm. Swing in carriage: 950mm. Swing in gap: 1600mm. Spindle: 65mm. Equipped with chuck of 1200mm. Speeds: 12. (7-213rpm.)
used
Geminis GE650 lathe. Distance between centers: 1500mm. Swing: 680mm. Swing in carriage: 410mm. Swing in gap: 850mm. Spindle: 82mm. 18 speeds (18-1250rpm) Equipped with chuck and steady rest. Weight: 3980Kgs.
used
Turning diameter: 1420 mm Turning length: 3000 mm Turret positions: 8 CNC Brand: Siemens CNC Model: 840 D-SL Krewema - HDFM 55 x 3000 CNC Lathe Ø 1420 x 3000 mm C-Axis Live Tools = Mach4metal 6986 4 chuck 1600 mm 4 chuck 900 mm 3 chuck 630 mm ( bore 310) Sauter 8 position revolver Vdi 60 tool system Internal coolant tool holder Radial live tool holder Axial live tool holder Chip conveyor Internal coolant tool holder Swing over bed Ø: 1.420mm Swing over cross slide Ø:920mm Swing in the gap Ø: 2.050mm DBC Turning Length: 3000/4000 mm Gap length: 1.000mm Spindle bore: 155mm Spindle power: 51kW Bed width: 750mm Tailstock spindle Ø: 160Ø Stroke pinole: 300mm Spindle taper: MET 80 Mk Speeds / ranges: 1200Rpm Feed rate X-Axis: 8.000mm/min. Feed rate Z-Axis: 6.000mm/min. Length: 9.000 mm Width: 3.500 mm Height: 3.200 mm
used
Turning diameter: 1200 mm Turning length: 5000 mm Turret positions: 0 CNC Brand: NUM CNC Model: 760 MACH-id 3413 MAKE Geminis TYPE CNC 1.200 YEAR 90´s SPECIFICATIONS Swing over bed Ø 1.200 mm Control NUM 760 Distance between centres 5.000 mm Spindle speeds / ranges 710 Rpm Bed width 1.150 mm Power 55 Kw Geminis CNC lathe
used
Turning diameter: 1120 mm Turning length: 6000 mm Turret positions: 0 CNC Brand: NUM CNC Model: 760 MACH-id 3414 MAKE Heyligenstaedt TYPE ND 560 YEAR 1968 SPECIFICATIONS Swing over bed Ø 1.120 mm Control NUM 760 Swing in the gap Ø 760 mm Distance between centres 6.000 mm Work piece weight 16.000 kg Spindle speeds / ranges 900 Rpm Heyligenstaedt cnc lathe
used
Turning diameter: 575 mm Turning length: 1300 mm Turret positions: 0 CNC Brand: Fanuc CNC Model: 18 T SPECIFICATIONS Swing over bed Ø 575 mm Control Fanuc 18 T Swing over cross slide 370 mm Distance between centres 1300 mm Spindle bore77 mm Spindle speeds / ranges 3500 Rpm DIMENSIONS Length 4000 mm Width 1980 mm Height 2098 mm The used lathe Doosan Puma 250 LMB type with CNC Fanuc 18 T
used
CNC lathe fabr. SCHERER-FEINBAU type SNC 80Machine -No: 8079 Year 1995Distance between centers: 350 mmCircumference diameter over bed: 320 mmCircumference diameter over support: 160 mmPath Z + X: 250 mmSpindle mount: DIN 55021 / A 3Speed range up to: 6000 rpm.Feed infinitely variable: 0.1 - 10000 mm / min.Rapid traverse: 10 m / min.Quill stroke: 125 mmDrive power: 7.0 kWWeight approx: 2.0 tOutside dimensions approx: 2100 x 1500 x 1900 mmWith- Siemens control 810 T- power chuck- Linear turret with 4 tool holders- Cooling deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Center height: 0 mm Center distance: 1500 mm Spindle bore: 90 mm SPECIFICATIONS Swing over bed Ø 560 mm Control Conventionel Swing over cross slide 370 mm Swing in the gap Ø 800 mm Distance between centres 1500 mm Spindle bore 90 mm Spindle speeds / ranges 1600 ( 18 steps) Rpm Power 11 Kw DIMENSIONS Length 3300 mm Width 1270 mm Height 1400 mm incl. collet device incl. 4 chuck incl. Multi fix tuype tool system FMT Tarnow TUJ universal centre lathe
used
CNC lathe make MONFORTS type DNC 5Year 1995 with C-axis and driven tool stationsCircumference diameter: 560 mmNumber of revolvers: 2Travel distance Z1 / Z 600/600 mmTravel X1 / X 260/260 mmMax. Spindle distance: 1460 mmSpindle passage: 85 mmSpindle flange: A8 / A8feed drivesRapid traverse Z1 / Z 15/15 m / minRapid traverse X1 / X 12/12 m / minFeed force Z1 / Z 11900/11900 NFeed force X1 / X 6600/6600 NNumber of revolvers: 2Number of tools per turret: 12Straight shank: 40 mmTurning tool shank: 25 x 25 mmSpeed range: 5 - 4000 rpm.Drive power: 18/24 kWWith:- CNC control SIEMENS 840 C- C axis- 2 tool turrets with driven tool stations- without driven tools- 2 opposite spindles- 1 set of tool holders- Chip conveyorSingle-layered run!usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors except ...
used
CNC Lathe Fabr. VDF BÖHRINGER Type 180 CmYear of construction 1996Turning length: 500 mmMax. Circulation diameter: 330 mmMax. Turning diameter: 250 mmSpindle bore: 78 mmSpeed range: 50 - 4500 rpm.Spindle mount: DIN 55026/6Max. Torque: 800 NmFeed rate: - 10000 mm / minRapid traverse speed: 15 m / minDrilling force: 10 kNDrive power: 53 kWWith- CNC control SINUMERIK 840 C- Drum revolver with 12 tool holders- 6 positions with driven tool positions- 4 powered tools- many tool holders 40 mm- Bar feeder SIEMCA MO 4.6 / 4musedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Mechanic lathe Fabr. WEILER Type MDU 260 pGFabr.Nr. 4420, built in 1957for chip removal with manual feed, easier for one-off productionTurned parts in the pliers, in the lining or between the tipsCenter height: 125 mmTip width: 500 mmTurning diameter over support: 140 mmSpindle bore: 28 mmMax. Zangendurchlaß: 22 mmMax. Pliers bore, not continuous: 25 mmFeed travel cross slide: 100 mmFeed path for cross slide: 95 mm16 speeds: 110 - 3600 rpm.2-speed motor pole reversible: 750/3000 rpm, 0.45 / 1.0 hpExternal dimensions: 1300 x 550 x 1200 mm highWith:- Collet chuck with 1 collet- Hand lever support for longitudinal pull- motorized suit- High-speed cutterhead- Drum stops- Thread turning deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleas ...
used
Turret Lathe Fabr. WEILER Type RDU 260/38Machine -No: 1554Center height: 125 mmSpindle bore: 38 mm14 spindle speeds: 110 - 3600 rpm.Commute d. Revolver slide: 100 mmTurret: with 6 toolsDrive power: 0.5 / 1.2 hpExternal dimensions: 1400 x 600 x 1170 mmWith- integrated collet device andCollet set- Parting support- Revolver stick- 2 quick-change steel holders m. different.insertsused, from operating resolutionin good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Turning diameter: 915 mm Turning length: 3225 mm Turret positions: 15 CNC Brand: Mazatrol CNC Model: Fusion 640 Make MAZAK 60 N Type Slant turn 60 N Year 2007 Mazak slant turn with Mazatrol Fusion 640 Centre height (mm) Swing = 915 Center distance (mm) DBC = 3.225 Spindle bore Bore = 100 Turret 15 positions Power 45 kW Work load 3000 Kg- Tool eye - chip conveyor - steady rest - package tooling CNC mazak slant turn lathe
used
Center height: 0 mm Center distance: 2000 mm Spindle bore: 82 mm Make VDF DUE 71 Type DUE 710 Year 1982 Universal turning lathe Centre height (mm) Swing bed = 750 Center distance (mm) Swing sup = 450 Spindle bore Bore = 82 Speeds = 1800 Feeds 3 directions DBC = 2.000 mm
used
Turning diameter: 290 mm Turning length: 640 mm Turret positions: 12 CNC Brand: _Unknown / Other Make Gildemeister Type CTX 400 E Year 1996 CNC Lathe with revolver Centre height (mm)Swing = 290 Center distance (mm)Length = 640 Spindle bore Bore = 72 Speeds 5000 Rpm Revolver 12 Positions Collet device + inserts
used
Table universal lathe make Fabr. SEE type RAPIDMachine -No: 3264Center height: 125 mmSpindle bore: 36 mmSpindle cone: MK 5infinitely variable spindle speeds: 465 - 4200 rpmTable mounting surface: 300 x 265 mmSupport longitudinal path: 100 mmSupport cross travel: 125 mmDrive power: 0.37 kWPower connection: 380 V / 50 HzDimensions (H x W x D): 850 x 500 x 1250 mmWeight approx:200 kgWith- Underframe- Three-jaw chuck 125 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Center height: 0 mm Center distance: 4000 mm Spindle bore: 102 mm Make TOS SU 125 Type SU 125 x 4 Year 80 er Heavy Duty turning lathe Centre height (mm)Swing bed = 1.250 Center distance (mm)Support = 940 Spindle bore DBC = 4.000 Bore = 1024 chuck 1250 3 x steady rest
used
Mechanic lathe Fabr. VEB CARL ZEISS JENAFabr. -No: 607/84, built in 1984Center height: 150 mm:Circumference diameter over support: 75 mmTip width: 550 mmSpindle bore: 27 mmThread pitches: 0.35 / 0.5 / 0.75 / 1.0 / 1.5 / 2.0Operating voltage / control voltage: 380 V, 220 V, 50 HzRated current of the fuse: 25 AExternal dimensions L x W x H: 1250 x 900 x 1350 mm:With- Underframe- Thread cutting device guide cartridge- large rear shelf made of wood 460 x 990 mm- without tailstockused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Multi-turn lathe make HAHN & KOLB type TORNOMAT 2Masch. -No: 668273 Year 1973Working area hexagonal: 3 - 36 mmWorking area 4-edge: 3 - 24 mmhydr. Feed per revolution: 0 - 0.5 mmRapid traverse: 3.7 m / min.Switching time: 1.0 sec.Speed of the rotor: 250/355/450 rpm.Speed of the spindle: 2250/3200/4050 rpm.Drive power: 2.2 / 1.5 kWWeight approx: 1.25 tOutside dimensions approx: 670 x 1530 x 1220 mmWith- Electric control cabinet- Accessories and tool cabinet complete with content- Cabinet with collets- conveyor beltused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
High precision turret lathe manufactured by SCHAUBLIN type TR 102 HPMasch. -No: 167073, year of construction 1966controlled hydropneumaticallyTechnical specifications:Tip height: 102 mmBed length: 900 mmDistance between headstock and turret: 300 mmCollets passage: 22 mmNumber of places in the revolver: 6Bore diameter: 20 mm6 spindle speeds: 840 - 3000 rpm.Feed rates: 0.02 - 2 mm / minFast delivery: 8 m / minrequired air pressure: 5 - 7 atmAir consumption: 5 - 10 m3 / hDrive power: 2.5 HPWeight approx: 670 kgExternal dimensions: 1930 x 590 x 1680 mmWith- Collet insert- bar feed- various accessoriesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO ...
used
Mechanic lathe make WEILER type Primus MD / GMachine -No: 2728-1Technical specifications:Distance between centers: 430 mmCenter height: 120 mmTurning diameter over bed: 195 mmTurning diameter over cross slide: 135 mmCircumferential diameter over bed: 250 mmBed width: 155 mm18 spindle speeds: 60 - 3000 rpm.Spindle bore: 23 mmDrive power: 1.2 / 1.5 kWDimensions: 1200 x 650 x 1330 mmWeight: 340 kgwith- three-jaw chuck- Multifix steel holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Turning diameter: 1000 mm Center distance: 5000 mm Spindle bore: 0 mm Numbers of bed guide ways: 0 Weight between centres maximum: 14000 kg Make Skoda SRM 1 Type SRM 100 x 5000 Year 1976 Heavy Duty Lathe Centre height (mm) Swing bed = 1.000 Center distance (mm) DBC = 5.000 Spindle bore Work load = 14 T incl. 4 chuck 1000 mm incl. steady rest 500 mm Power 40 kW / bed width 950
used
Mechanic lathe make WEILER type Primus MD / GMachine -No: 2729-1Technical specifications:Distance between centers: 430 mmCenter height: 120 mmTurning diameter over bed: 195 mmTurning diameter over cross slide: 135 mmCircumferential diameter over bed: 250 mmBed width: 155 mm18 spindle speeds: 60 - 3000 rpm.Spindle bore: 23 mmDrive power: 1.2 / 1.5 kWDimensions: 1200 x 650 x 1330 mmWeight: 340 kgwith- three-jaw chuck- Multifix steel holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Center height: 0 mm Center distance: 2000 mm Spindle bore: 130 mm Make EST Ticino 71 Type ET 350 Year 1986 Universal turning lathe Centre height (mm)Swing = 710 Center distance (mm)DBC = 2000 Spindle boreBore = 130 Philips 2500 Dro 4 chuck = 600 mm 3 chuck = 315 mm Multific TIPO C Feeds
used
Center height: 0 mm Center distance: 2000 mm Spindle bore: 0 mm Make Heyligenstaedt Type 900 ESa Year 60 er Heyligenstaedt Facing lathe Centre height (mm)Swing bed = 1.780 4 chuck = 1.500 Spindle boreTurn length = 2.000 Turning speed = 180 Rpm Main power = 25 kW
turning diameter:402 mm turning length:750/1000 mm control: 808 turning diameter over slide rest:380 mm centre height:200 mm bed width:250 mm :135 kg spindle taper:4 MK spindle nose:A2-5 spindle bore:42 mm spindle turning speed range:40-2800 (3) U/min longitudinal feed:0-5000 mm/U cross feed:0-5000 mm/U diameter of quill:58 mm sleeve conus:4 MK quill stroke:180 mm fixed steady::Ø 10-125 (110-200 opt.) mm with live steady:Ø 10-80 mm power requirement:4 kW :8605 DIN Weight approx.:1/1,3 t CNC controller:Siemens 808D (Fagor/Fanuc als Option) multifix tool holder:mit Werkzeughaltern center morse:2 Stück Brand new Center Lathe KRAFT DLZ 200 Series More information can be found in the appendix
used
Turning diameter: 580 mm Turning length: 100 mm Turret positions: 0 Positions ATC: 0 Number controlled axis: 0 CNC Brand: Fanuc CNC Model: O T Make Daewoo 315 L Type 315 L ECOTURN Year1995 Fanuc OT CNC turning lathe daewoo ecoturn 315 L Centre height (mm)Swing = 580 Center distance (mm)DBC = 1.000 Spindle bore Turret = 10 Pos Chip conveyor Kitagawa 315 mm
used
Pipe and flange lathe make WISCH type RA 8-36Mash. -No: 9-3430light construction site machineTurning diameter: 80 - 400 mmClamping diameter: 80 - 365 mmminute Clamping length: 190 mmTool speeds: 11.3 / 22.6 rpm.Radial feed: by hand / by camMax. Travel: 95 mmFeed rates: 0.166 / 0.33 mm / rev.Axial feed: by handMax. Travel: 55 mmMax. Turning length for external turning work: 40 mmMax. Turning length for internal turning: 30 mmDrive power: 0.8 / 1.2 kWSupply voltage: 380 V / 50 HzDimensions approx L x W: 775 x 760 mmHeight above center (without carrying hook): 210 mmHeight below center: 320 mmTotal height: 530 mmWeight approx: 74 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your q ...