lathe vertical used for sale

Table ø 1000mm Max turning height 1100mm

faceplate diameter:3500 mm swing diameter:3800 mm turning height:2300 mm max. turning diameter:3800 mm table load:40 t table speeds:10 - 38 1/min transmission ratio:2 Stufen cross travel of ram-slide:rechts: 2500 mm cross travel of ram-slide:links: 2200 mm Travel of Ram (vertical):1500 mm total power requirement:70 kW Rams:2 Stück

faceplate diameter:3000 mm swing diameter:3400 mm turning height:3000 mm max. turning diameter:3400 mm max. workpiece weight:25 t weight of the machine ca.:105 t Dimensions (L/W/H):6450x7500x6950 mm

There are three EMAG VCS 200 available, connected load: 36kW, without tools, with documentation, were maintained regularly.

X-travel: 400mm, z-travel: 200mm, swing: 210mm, max. rotational speed: 5000/min, controls: FANUC, with handling, machine needs overhauling.

X-travel: 200mm, z-travel: 400mm, W-travel: 670mm, swing diameter over slide: 300mm, center distance: 600mm, max. turning length: 350mm, length: 2500mm, width: 2000mm, height: 3350mm, weight: 6t, with documentation.

X-travel: 200mm, z-travel: 650mm, W-travel: 750mm, swing diameter over slide: 265mm, center distance: 650mm, max. turning length: 650mm, length: 2500mm, width: 2000mm, height: 3350mm, weight: 7.2t, with documentation.

X-travel: +/-2750mm, z-travel: 2000mm, B-travel: +/-90°, C-travel: 360°, table diameter: 4500mm, turning and circumferential diameter: 5000mm, max. turning height: 2645mm, rotational speed: 8-3000/min, controls: Siemens SINUMERIK 840D, with documentation, base, stand, crossbar, support and chisel pusher.

There are two identical Emag VSC 200 available, x-travel: 685mm, z-travel: 160mm, chuck diameter: 200mm, circumferential diameter: 290mm, connected load: 29kW, controls: SIEMENS SINUMERIK, length: 2700mm, width: 1150mm, height: 2800mm, weight: 6.5t, with documentation.

Turning length: 300mm, turning diameter over bed: 200mm, control: Siemens Sinumerik, with documentation, cooling lubricant system and chip conveyor, the machine has only rarely been in operation for approx. 2.5 years, an on-site inspection is possible.

A single-spindle pick-up lathe is available, max. swivel diameter: 250mm, working spindle nose: ASA 6 inch, spindle in front bearing: 110mm, max. chuck diameter: 250mm, weight: 13t, operating hours: approx. 82,400h, with documentation, an on-site inspection is possible.

A single-spindle pick-up lathe is available, max. swivel diameter: 130mm, spindle in front bearing: 90mm, max. chuck diameter: 160mm, weight: 10t, operating hours: approx. 88,000h, with documentation, an on-site inspection is possible.

Rotation diameter: 450mm, control: GE Fanuc Series 21i-TB, weight: 13.5t, operating hours: 80,305h, available from 1st quarter 2024.

X-travel: 520mm, z-travel: 200mm, circumferential diameter: 325mm, spindle bore: 60mm, rapid traverse: 30m/min, number of tool positions: 25, control: Index C200-4, including three-jaw chuck, pallet circulation system, coolant tank, scraper belt conveyor, tool holder and documentation, on-site inspection is possible.

chucking diameter: 250 mm swing diameter: 260 mm travel -x axis: 570 mm travel -z axis: 200 mm control: FANUC 18 i-T Turning speeds mainspindle: 4500 U/min numbers of positions in the tool changer: 12 Dimensions (L x W x H): 3.700 x 1.500 x 2.400 mm weight of the machine: 6.500 kg main drive motor: 15 kW turret 12 station: VDI 40 machine is equipped with a closed standard autom. loader: for 12 workpieces 80 mm-220 mm for 14 workpieces 30 mm-160 mm for 28 workpieces 30 mm-85 mm max. total load 120 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table diameter, mm 4500 Max. work piece diameter, mm 5000 Max. work piece height, mm 2500 Max. work piece weight, kg 63000 Chuck speed, rpm 0,34 ... 31 Main electric motor power, kW 125 Machine overall dimensions, mm 6600 x 11400 x 8400 Machine weight, kg app. 140500

chuck diameter, mm 7100 (8000) Max. work piece diameter, mm 8000 Max. work piece height, mm 3200 Max. work piece weight, kg 125000 Chuck speed, rpm 0,22...20,1 Max. ram movement of vertical support, mm 2000 Max. movement of vertical, mm 4275 Support feed range, mm/min 0,0352...285 Support rapid feed, mm/min 2500 Supports possible work angle, deg. -15...+40 Jaws, units 4 Machine overall dimensions, mm 8615 x 17600 x 9800 Machine weight, kg app. 247300

- Work piece maximum diameter: 8500 mm; - Distance between columns: 8500 mm; - Work piece maximum diameter through gantry travel: 11000 mm; - Work piece maximum height: 6000 mm; - Work piece maximum weight on faceplate: 100 tons; Table-Faceplate - Diameter: 6000 mm; - Speeds range (continuously variable): 0-50 rpm; - 4 x 40 kW main motor FANUC make: 160 kW; Fixed table - Dimensions: 3x2000x6000 mm; Gantry - Horizontal travel Y axis: 11800 mm; - Feeds range (continuously variable): 10000 mm/min; Cross rail - Vertical travel W axis: 5200 mm; - Feed range (continuously variable): 0 ÷ 250 mm/min; - Feed motor power: 50 kW; Vertical Rail Head (turning and milling operations) - Vertical ram travel (Z axis): 2700 mm; - Rapid feed speed for Z axis: 10000 mm/min; - Ram cross section: 450x450 mm; - Milling motor power: 40 kW; - Millin ...

Chuck dia. 2250 mm Max turning dia -- passage 2500 mm Max hight of workpiece Z-axis 1600 mm Vertical caliper max horizontal travel: 1390 mm max vertical travel: 1200 mm Crossbar max travel: 1240 mm Completely renovated in 2012 Heidenhain measuring bars and NC Siemens 855 control

Machining capacity - Maximum workpiece diameter: 6300 mm; - Maximum height of workpiece to be machined: 4600 mm; - Maximum weight of workpiece: 150000 kg; Faceplate - Faceplate diameter: 6000 mm; - Turning speed range: 30 rpm; - Main motor power: 125 kW; - C axis: 0-360°/min.; Cross rail - Cross rail vertical travel: 3500 mm; - Feed of cross rail: 1000 mm/min.; - Motor power: 18.5 kW; Turning and Milling RAM, 1 piece - Vertical RAM travel, Z1 axis: 2400 mm; - Horizontal RAM travel, X1 axis: 7200 mm; - RAM octagonal section: 310x310 mm; - Maximum milling speed: 3000 rpm; - Maximum milling power: 30 kW; - Maximum torque: 800 Nm; - Milling spindle taper: ISO-50 (DIN69871/DIN69872); - X1/ Z1axes rapid feed: 6000 mm/min; Turning RAM, 1 piece - Vertical RAM travel, Z2 axis: 2400 mm; - Horizontal RAM travel, X2 axis: 7200 mm; - RAM octagonal section: 310x310  ...

Maximum machining diameters: 4000 mm / 3500 mm (clamping plate) Clamping plate speed: max. 80 rpm Maximum workpiece height: 2000 mm Main drive power: 55 Kw Note grinding equipment Maximum workpiece weight: 40t Regular service and maintenance

Hwacheon Model: VT-550 2SP Serial No.: M088358K4G E Year of Manufacture: 2010 Maximum spindle speed : 2000 rpm Maximum turning length: Ø700 mm. Spindle height: 1230 mm Maximum tool diameter: Ø26 Magazine capacity: 2 magazines x 12 tools X axis: 350 mm Y axis: Z axis: 790 mm Control: Fanuc Series Oi-TD Machine weight: 13.000 kg (each machine) Power: 75 Kva Running hours: 45963 Hours. Cutting time: 20155 Hours.

Vertical working stroke 435 mm Horizontal X working stroke 520 mm Recirculating ball screws diameter 40 mm Ball screw pitch 8 mm Axis movement motors 12 Newtons On-axis reading system with optional ballscrews optical scales CNC Fanuc Maximum lathe diameter 250 mm Max. put diameter 250 mm Spindle Asa 6 Max. electro spindle power 22 kW Maximum speed 6000 Rpm Maximum torque 119 nm

Three axes + revolver turret with twelve driven tools + automation. Turning diameter: 160 mm Turning height: 150 mm Table/pallet diameter: 100 mm Turning power: 19.5 kW Z axis carriage travel: 375 mm Number of tools: 12 Pallets: Yes Length: 7000 mm Width: 3500 mm Height: 3100 mm Weight: 5500 kg

The chuck is self-centering with 6 jaws and has a diameter of 1000 mm with the possibility of processing pieces up to a size of 1400 mm. The total electrical absorption of the lathe is approximately 130 A and includes: • spindle motor • x and z axis motors • head lubrication pump motors • refrigerant pump motor • hydraulic central pump motor • crosshead motor The CNC on the machine is FAGOR. Electrical diagrams and machine use and maintenance manuals are available

Machine also is fitted with: -Span conveyor ; -Cooling device; -Fairing for cooling device. Last edition CNC Fanuc equipment. Delivery time: 2 months. Please send request for more technical details, price and photos. Machine can be seen in our workshop anytime.

Webster & Bennett 36” Fixed Rail vertical borer Table Diameter 36 ” with a set of standard jaws Max swing 46 ” gripped on the inside Max height under cross rail 23” Travel of ram 22” Cross travel 23” from centre and will travel 2” past centre Table speeds 185 to 400 RPM ( 12 ) Feeds 0.005” to 0.250” per rev ( 12 ) 25 HP main motor Volt 440

The machine is in good technical condition, testing possible upon agreement. Clamping plate diameter: 1000 mm Max. diameter of peripheral turning: 1150 mm Max. workpiece height: 900 mm Performance of the main engine: 40 kW Machine weight: 12,000 kg

Total machine input:: 83 kW Clamping plate diameter: 2400 mm Max. workpiece diameter: 2600 mm Max. workpiece height: 1600 mm Max. workpiece weight: 15000 kg

The SK 125 carousel is in good technical condition. Can be seen by appointment. Machine weight: 556000 kg Total machine input:: 686 kW Clamping plate diameter: 125 mm Max. workpiece height: 4000 mm Max. workpiece weight: 120 kg Clamping plate speed: 0.35-14 rpm The largest av. lathe. cross and side support.: 12500 mm Avg. clamping plates:: 8000 mm The greatest distance between clamps. plate and knife. side holder support :: 4200 mm Machine dimensions lxwxh: required area 20000x20000x12000 mm

Description: Machine number: 177055919 Control system: SIEMENS SINUMERIK 840 D Chuck diameter: max. 210 mm Turning diameter: 400 mm Workpiece length: 120 mm X-axis travel path: 1130 mm (total travel path) X-axis travel path (working path): 400 mm Z-axis travel path: 280 mm Rapid traverse X-axis: 60000 mm/min Rapid traverse Z-axis: 30000 mm/min Motor spindle: Spindle diameter in the front bearing: 90 mm Spindle speeds: Rotating spindle speed range infinitely variable: max. 6000 rpm Disk turret with holder for driven tools: 8 pieces Shank diameter: 40 mm Spindle speed: max. 4000 rpm Torque: max. 50 Nm Working range with vertical drilling spindles Number of drilling spindles: 3 Spindle speed: max. 5000 rpm Drive power: 16 kW Torque: max. 83 Nm Incl. 8-station tool turret and a power chuck (diameter: approx. 250 mm) from the manufacturer SMW Incl. conveyor station from the manufacturer SCHNA ...

Description: X-axis Storke 268 mm Y-axis Stroke 488 mm 12-station Turret TRANSPORT DIMENSIONS: Machine body: 1460x2600x2900 mm Evacuator: 2700x1600x1600 mm Transformer: 550x400x600 mm A LOW-BOY TRAILER IS REQUIRED FOR TRANSPORT turning height: 460 mm, swing diameter: 496 mm, control: FANUC i-Series, turning speed range: 3,000 rpm, feed range: 20 mm/min, total power requirement: 18.5/22 kW, weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,500 x 3,200 mm

Description: X-axis Storke 268 mm Y-axis Stroke 488 mm 12-station Turret TRANSPORT DIMENSIONS: Machine body: 1460x2600x2900 mm Evacuator: 2700x1600x1600 mm Transformer: 550x400x600 mm A LOW-BOY TRAILER IS REQUIRED FOR TRANSPORT turning height: 460 mm, swing diameter: 496 mm, control: FANUC i-Series, turning speed range: 3,000 rpm, feed range: 20 mm/min, total power requirement: 18.5/22 kW, weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,500 x 3,200 mm

Description: Face plate diameter 1800 mm weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 4,800 x 4,000 x 4,600 mm

Description: Turning diameter 450 mm x-axis 330 mm z-axis 650 mm Tailstock stroke 880 mm Spindle bearing diameter 150 mm Spindle speed max. 5,000 rpm Tool speeds 12,000 rpm Rated current 102 A Description: Equipment see attached list Cooling unit Chip conveyor IFS room air filter type IFM 2000 control: SINUMERIK 840 D, turning speed range: 5.000 rpm, total power requirement: 42 kW, weight approx.: 22,000 kg, Approx. Onsite Dimension. (l x w x h): 6,500 x 3,800 x 3,100 mm

Description: EMAG VTC 250 with automation C-axis, driven tools with automation (tool assemblies) 250mm machining weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,600 x 3,200 mm

Description: Table diameter: 2,500mm Max turining diameter: 3,000mm Max swing: 3,500mm Load on table: 25 ton Table speed: 37.5-130 rpm (2 steps) Table motor: 37/45kw XZW: -200~+2,700 x 1,200 x 1,100mm Ram size: 240 x 240mm 12 tool ATC Chip conveyor Includes shipping to any major seaport in the world. turning height: 2,500 mm, control: Fanuc 31iA, turning speed range: 37.5 - 130 rpm, total power requirement: 37/45 kW, weight approx.: 70,000 kg, Approx. Onsite Dimension. (l x w x h): 11,100 x 8,800 x 8,000 mm

Description: XZ travel: 580/1000mm 32” hyd. chuck Manual tool presetter Chip conveyor Includes shipping to any major seaport in the world. turning height: 1,000 mm, swing diameter: 1,100 mm, control: Fanuc, turning speed range: 800 rpm, total power requirement: 45/55 kW, weight approx.: 22,000 kg, Approx. Onsite Dimension. (l x w x h): 2,830 x 3,305 x 4,012 mm

Description: serial number: ,178055495 control: SIEMENS Sinumerik 840D working hours: approx. 48173 hrs.  , travels: X-axis: 400 mm Z-axis: 280 mm  , rapid traverse: X-axis: ,60 m/min. Z-axis: 30 m/min.  , max. spindle speed: 6000 rpm spindle power: 30 kW spindle bearing diameter: 90 mm chuck diameter: 210 mm toolchanger positions: 12 total power requirement: 75 kW  , including: Chip Conveyor DGS SGF450 P50, YOM 2002 Suction Filter IFS IFM 2000, YOM: 2002, power: 1.5 kW  , without conveyor/loading system  , please also have a look at the videos of this machine serial number: 178,055,495, x-motion: 400 mm, z-motion: 280 mm, Read off operating hours: 48,173 h, Accessories included: Yes, control: SIEMENS Sinumerik 840D, toolchanger positions: 12, turning speed range: 6,000 rpm, weight approx.: 16,000 kg, Approx.  ...

Description: serial number: ,178055496 control: SIEMENS Sinumerik 840D working hours: approx. 60633 hrs.  , travels: X-axis: 400 mm Z-axis: 280 mm  , rapid traverse: X-axis: ,60 m/min. Z-axis: 30 m/min.  , max. spindle speed: 6000 rpm spindle power: 30 kW spindle bearing diameter: 90 mm chuck diameter: 210 mm toolchanger positions: 12 total power requirement: 75 kW  , including: chip conveyor DGS SGF450 P50, YOM 2002 suction filter IFS IFM 2000, YOM: 2002, power: 1.5 kW  , without conveyor/loading system  , please also have a look at the videos of this machine serial number: 178,055,496, x-motion: 400 mm, z-motion: 280 mm, Read off operating hours: 60,633 h, Accessories included: Yes, control: SIEMENS Sinumerik 840D, toolchanger positions: 12, turning speed range: 6,000 rpm, total power requirement: 75 kW, weigh ...

Description: serial number: M200.24423 control: SIEMENS Sinumerik 840D working hours: approx. 78048 hrs.  , travels: X-axis: 685 mm Z-axis: 160 mm turning diameter: 290 mm turning length: 200 mm rapid traverse: X-axis: 45 m/min. Z-axis: 30 m/min. max. spindle speed: 6500 rpm spindle bore: 50 mm toolchanger positions: 12 shank diameter: 40 mm power main motor: ,16 kW  , inlcuding: DGS MBF 450 Chip Conveyor, YOM 1998 IFS IFE 2000 Suction Filter, YOM: 1999, power: 0.75 kW conveyor/transportation system  , please also have a look at the PDF documents of this machine turning diameter: 290 mm, Drehlänge: 200 mm, serial number: M200.24423, x-motion: 685 mm, z-motion: 160 mm, Read off operating hours: 78,048 h, Accessories included: Yes, control: SIEMENS Sinumerik 840D, toolchanger positions: 12, spindle bore: 50 mm, turning speed range:  ...

faceplate diameter:10000 mm swing diameter:10000 mm turning height:5000 mm ram head dimension:280x280 mm workpiece weight:200 t table turning speeds:0.23 ? 14 U/min transmission ratio:2 Stück Travel of Ram (vertical):2500 mm Travel of ram (horiz.):5150 mm Machine size (LxWxH):ca. 19500x11500×11600 mm main drive:132 kW weight of the machine ca.:290 t CNC controller:Siemens 828D/Fanuc 0i TF hydr. components:Kompass (Taiwan) Rams:2 (konv. + CNC) Stk. servo spindle motor:Siemens/Fanuc CE-design:optional Stock machine with short delivery time of only approx. 3-4 months. Main components available! Brand new vertical lathes double stand, type KRAFT, type VTL - 100 CNC incl. Siemens 828D or Fanuc 0i TF with two tappets (one piece of conventional and one piece CNC controlled ram) Substantially parts of the hydraulics of Taiwanese manufacturer compass Illustration similar. Also leasing and hire ...

faceplate diameter:2500 mm swing diameter:3000 mm turning height:1700 mm max. turning diameter:2800 mm weight of the machine ca.:53 t Chip Conveyor Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication for Guide way 4 Jaw Manual Chuck 1600mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System Options Installed Air Conditioner For cabinet Coolant Through Spindle Filter for Coolant Water CE Mark Transformer

faceplate diameter:2000 mm swing diameter:2500 mm turning height:1700 mm max. turning diameter:2300 mm weight of the machine ca.:52 t Chip Conveyor Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication for Guide way 4 Jaw Manual Chuck 1600mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System Options Installed Air Conditioner For cabinet Coolant Through Spindle Filter for Coolant Water CE Mark Transformer

faceplate diameter:1000 mm swing diameter:1350 mm turning height:1070 mm total power requirement:75 kva weight of the machine ca.:25 t dimensions of the machine ca.:5,3x4,6x5,5 m Standard accessories: Chips Conveyor & Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication in Guide way 4 Jaw Manual Chuck 1000mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Tower Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System installed options: Air Conditioner For Electrical Box Coolant Through Spindle Filter Of Coolant Water CE Mark Transformer

faceplate diameter:1250 mm swing diameter:1600 mm turning height:1350 mm max. turning diameter:1350 mm weight of the machine ca.:32 t Chip Conveyor Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication for Guide way 4 Jaw Manual Chuck 1600mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System Options Installed Air Conditioner For cabinet Coolant Through Spindle Filter for Coolant Water CE Mark Transformer

:KDM-12 | KDM-16 | KDM-20 | KDM-23 faceplate diameter:1000|1400|1800|2000 mm swing diameter:1250|1600|2000|2300 mm turning height:1000 (opt. 1400)|1000 (opt. 1400)|1250 (opt. 1650)|1250 (opt. 1650) mm table speeds:5 - 200 (2-360 opt.)|5 - 160 (2 - 300 opt.)|3,2 - 100 (2-200 opt.)|3,2 - 100 (2-180 opt.) 1/min transmission ratio:4 (variabel in jeder Stufe) max. workpiece weight:4|6|8|10 t max. torque on the faceplate:20|25|25|25 KN rapid feed of tool post:8000|3000|3000|3000 mm/min feed speeds:0.1 - 500 mm/min Max. cutting force of tool head :18|25|30|30 KNm Travel of Ram (vertical):600|800 (1000 opt.)|800 (opt. 1000)|800 (opt. 1000) mm Travel of ram (horiz.):850|1000|1115|1400 mm Cross rail travel :600|850/1000 (optional)|890/1240 (optional)|990/1240 (optional) mm power maindrive:22/30|30/37|37/45|37/45 kW weight of the machine ca.:9|12,5|18,5|20,5 t Machine size (LxWxH):2360x2277x3403|26 ...

:KDM-K 12| KDM-K 16 | KDM-K 20 | KDM-K 23 | KDM-K 26 faceplate diameter:1000|1400|1800|2000|2300 mm swing diameter:1200|1600|2000|2300|2600 mm turning height:1000|1250|1400|1600|1500 mm table speeds:6,3- 200|5-160 | 3.2-100 | 5-160 | 2,5- 80 m/min transmission ratio:16 max. workpiece weight:3,2|5|8|8|8 t rapid feed of tool post:1800 mm/min feed speeds:0,8-86 mm/min in X-Achse Travel of Ram (vertical):650/700|800/1000|800/1000|800/1000/1300|1000/1380 mm Travel of ram (horiz.):630|915|1115|1250|1500 mm max. vertical adjustment of side-support:900|900|980|980 mm max. horizontal adjustment of side-support:630|630|500|500 mm Cross rail travel :850/1100|890/990/1240/1640|1240/1640 mm power maindrive:22|30|37|37 kW weight of the machine ca.:9|14|18|23|21 t Machine size (LxWxH):2299x2540x3403|2660x26603698|3135x3070x3910|3380x3360x4300|390 0x2950x4400 mm tool holder:5 fach :LED 4 jaw chuck:mit  ...

:KDM-K 25 | KDM-K 28 | KDM-K 31 | KDM-K 35 faceplate diameter:2250|2830|3150|3500 mm swing diameter:2500|2800|3100|3500 mm turning height:1600/2000/2500 |2000/2500 |2000/2500 |2000/2500 mm max. torque on the faceplate:63000 Nm max. workpiece weight:10/16 t table speeds:0,5-80 |0,5-80 |2-63 |2-50 1/min Travel of Ram (vertical):1000/1250|1000/1250|1000/1250|1000/1250/1600 mm Travel of ram (horiz.):1400|1600|1700|1800 mm rapid traverse X-axis:3 m/min cross section of ram:200x255 mm rapid feed cross beam:350 mm/min power maindrive:55 kW Weight approx.:32/35/37|35/38/40|36/40/42|43/45 t face plate:siehe oben Rams:2 Stk. CNC controls from:Siemens/Fanuc turret:4-/6-fach, elektrisch

:KDM-K 40 | KDM-K 50 faceplate diameter:3150/3500|4000/4500 mm swing diameter:4000|5000 mm turning height:2500/3150/4000|2500/3150/4000 mm max. torque on the faceplate:100000 Nm max. workpiece weight:32/50/83 t table speeds:2 ? 40 1/min Travel of Ram (vertical):1300/1600/2000 mm Travel of ram (horiz.):2250 | 2800 mm rapid traverse X-axis:3|4 m/min cross section of ram:200x255 mm rapid feed cross beam:350 mm/min power maindrive:55|75 kW Weight approx.:58/75/115 |58/75/115 t face plate:siehe oben Rams:2 Stk. CNC controls from:Siemens/Fanuc turret:4-/6-fach, elektrisch