lathe and milling used for sale

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 20 mm -Weight: 4 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 200 V -Hole diameter: 16 mm -Weight: 5 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 1.5 kW 2820 rpm at 50 Hz -Motor: 2.2 kW 5800 rpm at 100 Hz -Voltage: 380 V -Shaft mounting: Ø 30 mm -Weight: 15 kg

I sell a combined pin cutting machine with drill head BALESTRINI I2F 1 swivel table with pneumatic material pressure. Automatic cutting saw from below. Milling head for pin or finger joint production. Drill head for dubel drilling production 3 spindle. Feed automatically. End sensors positioning. Available the same.

Universal milling angle head, milling angle head -Recording: SK 50 -Flange mounting outer diameter: 380 mm -Bolt circle diameter: 320 mm -Drive mounting diameter: 60 mm -swivel -Quick stroke: 65 mm -Dimensions: 450/400/H700 mm -Weight: 170 kg

Universal milling angle head, milling angle head -Receptacle: Collet -Recess inlet: Ø 160 mm -Bolt circle: 174 mm -Milling spindle: 45° -fully swiveling -Dimensions: 200/185/H320 mm -Weight: 20 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 1.85 kW at 17570 rpm at 300 Hz -Voltage: 165 V -Receptacle: Shaft collet -Number: 8 motors available -Price: per piece -Dimensions: 350/75/H160 mm -Weight: 12 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.6 kW 17350 rpm at 300 Hz -Voltage: 165 volts -Shaft mounting: Ø 16 mm L 10 mm -Number: 4x motors available -Price: per piece -Dimensions: 280/60/H140 mm -Weight: 4 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Shaft mounting: Ø 20 mm L 25 mm -Weight: 3 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 0.23 kW 18000 rpm at 300 Hz -Shaft mounting: Ø 15 mm L 25 mm -Number: 5x motors available -Price: per piece -Dimensions: 200/70/H90 mm -Weight: 2 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.23 kW -Speed: 18000 rpm at 300 Hz -Dimensions: 210/70/H100 mm -Weight: 2 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 0.6 kW 18000 rpm at 300 Hz -Shaft mounting: Ø 16 mm L 10 mm -Number: 2x motors available -Price: per piece -Weight: 3.3 kg

Universal milling machine Lagun from a training workshop in top condition! Head universally rotate, swivel and tilt. Type: FTV2 YOC 2006 Tool holder SK40 Drilling pinole Coolant device Travel X-axis x00 mm Travel Y-axis x60 mm Travel Z-axis x40 mm Milling head type Vertical milling head Speed range 40 - 2000 mm/rev Table clamping surface approx. x00 x x00 mm T-slot size xx mm Feed X-axis xxx mm Feed Y-axis xxx mm Feed Z-axis xxx mm Weight approx. 1,850 kg Further data on request, rest according to photos Special price

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.5 kW 17300 rpm at 300 Hz -Shaft mounting: Collet Ø 12 mm -Dimensions: 340 x 110 x H150 mm -Weight: 10 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.15 kW 11160 rpm at 200 Hz -Saw: max. Ø 150 mm -Motor: mounted on guides -Travel distance: 320/100 mm -Dimensions: 550/250/H330 mm -Weight: 17 kg

Tool magazine, tool holder, tool mount, milling tool -1 Recording: HSK80 -for tool changers -Shrink chuck, collet chuck, surface chuck, reducing sleeves, cutter head, end mill -Weight: 2 kg

Tool holder, tool magazine, tool mount, milling mount, milling tool -1 Recording: HSK80 -for tool changers -Shrink chuck, collet chuck, surface chuck, reducing sleeves, cutter head, end mill -Weight: 2 kg

Tool milling machine from a training workshop in very good condition Manufacturer Klopp Korradi Year of construction 1991 Digital SK40 automatic feed in three axes Drilling pinole 50 mm Head rotatable Spindle speeds up to 45-1950 rpm x-310 mm y-180 mm z-310 mm Table 600 x 250 mm Feed infinitely variable 10 - 470 mm/min. Machine dimensions approx. 1.0 x 1.1 x 1.6 m Power connection 400Volt 10 Ampere 3-axe digital device AXEsta Counter-holding for horizontal milling Coolant device Chip tub Special price

Radius cutter, milling cutter -Finishing cutter -1x Diameter: 84 mm Height 44 mm R12 mm -1x Diameter: 102 mm Height 53 mm R15 mm -1x Diameter: 114 mm Height 70 mm R20 mm Type: HSS Quantity: 3 pieces -Sale: only complete set -Weight: 5.4 kg

Counter support, counter bearing, bearing block, pillow block bearing, bearing for milling machine -Dovetail: 144 x 184 mm, 30 mm high -Drawing with the photos -Dimensions: 270/130/H195 mm -Weight: 12 kg

Tool holder, milling tool holder -Number: 21x SK50 recording -Receptacles: Ø 22-50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills -Sale: only complete set -Weight: 88 kg

Tool holder, milling tool holder -Number: 21x SK50 recording -Receptacles: Ø 22-50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills -Sale: only complete set -Weight: 90 kg

Tool holder, milling tool holder -Quantity: 20x SK50 recording -Receptacles: Ø 22-50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Sale: only complete set -Weight: 70 kg

1 KERN high precision Micro 5 Axis CNC Milling & Drilling machine type HSPC 2216, year 1997, serial number 352, HEIDENHAIN type TNC 426 PB CNC 5-axes contouring controller, polymer concrete monobloc machine frame, working ranges X 220mm, Y 160mm, Z 248mm, electro pneumatic tool changer, magazine for 32 tools, tool changing time approx. 3,0 sec., mid chip-to-chip period approx. 7 sec., brushless and digital drive system travel speed 6.000 mm/min., Z-axis protection by s/s lamelles, half-round sliding door offering a maximum of operator handling comfort, standard chip tray for protection of the X and Y axis, with HEIDENHAIN electronic handwheel type TNC 426 for manual adjustment of the axes, Table 365 x 240mm, Max Clamping area 350 x 230mm, Max workpiece weight 40Kg, 4th & 5th Axis attachment, Fischer Precise Spindle 42,000rpm, 2.6Kw, HSK25E Tool Adapter,  ...

Tool holder, milling tool holder -Number: 17x SK50 recording -Receptacles: Ø 22-50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Sale: only complete set -Weight: 68 kg

Table clamping surface: x-travel: 400 mm y-travel: 175 mm z-travel: 450 mm Spindle mount: ISO 30 Spindle speeds: 50-2000/50-3400 rpm Operating voltage: 380 V Total power requirement: approx. 2.5 kVA kW Space requirement: 1200 x 1000 x 1600 mm Weight: approx. 1100 kg

Tool holder, milling tool holder -Number: 17x SK50 recording -Photos: MK -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills -Sale: only complete set -Weight: 68 kg

End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool -Diameter: 40 mm -Working height: 50 mm -Recording: SK50 -Weight: 4 kg

Handy edge milling machine 230V. Scope of delivery as shown. Edge milling up to 7mm, round edge milling up to R3mm. Angle adjustable. HM plates rotatable and replaceable. This new machine comes from a warehouse clean-up. Scope of delivery incl. chip catcher (not shown here).

Make OKUMA WITH A NEW SPINDEL IN 2019 - RUNS ONLY 6 MONTHS AFTER WAS CHANGED MOTOR AND SPINDLE type MX 45 VAE Year of manufacture 2001/3 CONTROLS: OSP - U100M Technical Details x-way 762 mm y-way 460 mm z-way 450 mm total power requirement 35 kW machine weight approx. 5000 KG Type: MX - 45 VAE Control: OSP - U100M working range: Axis X: 762 mm Axis Y: 460 mm axis Z: 455 mm Spindle speed range: 50 - 7 000 rpm VARIABLE SPEEDS ATC: TOOL BT 40 TOOL MAGAZINE 20 TOOLS tool magazine: 20 pcs. Total power requirement: 35 kVA LAST SERVIS ON SPINDLE ON 2019 - ( BRAND - NEW SPINDLE) COST OF SERVICE OWER 35000 EUR , MACHINE WAS WORKING FROM THAT TIME ONLY HALF YEAR. WE ORGANIZE FOR CLIENT AS WELL TRANSPO

I sell a tenon machine for parallel milling, grooves for pallet tape etc. WACO T2-SL Year of construction 1984. Groove width 30mm. Motor 3,3kW Made in Germany. Available the same. With dokumentazion.

SPECIFICATIONS: Engine power HP: 3 Vertical leadership support Replacement tools available

Table clamping surface: 300 x 1100 mm Travel x: 780 mm Travel y: 250 mm Travel z: 410 mm Cbgaxkvf39 Spindle holder: SK 40 Pinole stroke: 100 mm Spindle speeds: 31.5 - 1400 rpm Feeds longitudinally and transversely: 12.5 - 630 mm/min Feeds vertical: 6.3 - 315 mm/min electr. Connection: 380 V, 5.5 kW Space requirement: 1770 x 1500 x 2050 mm Weight: approx. 2200 kg

Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 63 mm -Fresh height: 49 mm -Mounting hole: Ø 22 mm -Weight: 0.75 kg

Milling tool holder, attachment milling arbor -Recording: PK50 -Cutter: Ø 32 mm -Weight: 7 kg

Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 40 mm -Working height: 35 mm -Recording: MK 4 -Weight: 1 kg

Notching milling machine -automatic hydropneumatic milling feed -for milling cutters max.: Ø 250 mm

Agritec floor reversing milling machine UKO 40-120, for PTO 540 rpm, power requirement 18.5-45 kw (25-60 hp) Three-point attachment frame Cat.1, working width 115 cm, total width 142 cm, lateral displacement hydraulic 26 cm, this also allows use on walls, fences, etc. Equipment with trailing grid roller for perfect seedbed preparation. Weight approx. 412 kg. Incl. cardan shaft with friction clutch. 30 knives - all new, ready for operation, incl. cardan shaft with friction clutch. Further reversing milling machine 130 cm working width in stock as well as conventional tillers from 100 to 150 cm, ploughs, cultivators etc.

ORDER NO. 6623 TECHNICAL DATA - diameter range of machined pins 200mm - min length of input material 1100mm - infinitely variable feed speed + front/rear - knife head drive motor 15kW - feed motor 1,7kW Successively: - 2 toothed pulling shafts - 4-knife head - 2 smooth pulling pin shafts - electrically adjustable knife head - electrically adjustable shafts - dimensions length / width / height 3570x1300x1700mm - weight about 4000kg ADVANTAGES – German production - the possibility of turning poles into a cone – used turner, very good condition Net price: 159900 PLN Net price: 35533 EUR depending on the price 4,50 EUR (Prices may fluctuate with higher fluctuations)

Tool holder, milling tool holder -Number: 7x SK50 recording -Inner diameter: 32 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for: tool changers -Sale: only complete set -Weight: 4.6 kg

Tool holder, milling tool holder -Number: 4x SK50 recording -Inner diameter: 12/16/20/25 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for: tool changers -Sale: only complete set -Weight: 15 kg

Tool holder, milling tool holder -Recording: SK40 -Inner diameter: 25 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for: tool changers -Weight: 3.5 kg

Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter -1x milling cutter: Ø 52/170 mm -Diameter: 22 mm -Weight: 2 kg

Wood milling inserts, knife inserts, form milling inserts -Blade width: 60 mm -Blade thickness: 2 mm -For milling cutters: Ø 180 mm -Price: complete -Weight: 0.8kg

Wood milling inserts, knife inserts, form milling inserts -Blade width: 39 mm -Blade thickness: 2 mm -Radius: 7.5mm -Price: complete -Weight: 0.8kg

Wood milling inserts, knife inserts, form milling inserts -Blade width: 40 mm -Blade thickness: 2 mm -Price: complete -Weight: 0.3kg