129,021 used machines on RESALE, but how to find them? Machine Search
CONTROLS CNC controls TRAUB TX 8 BASIC FUNCTIONS number of spindles: 1 number of x/z slides: 1 number of turrets: 1 live positions: yes number of c-axes: 1 WORKING RANGE TURNING swing diameter (max): 450 mm turning diameter (max): 350 mm bar diameter (max): 60 mm worpiece length max.: 490 mm MAIN SPINDLE spindle revolutions (max): 4000 /min c-axis: yes TOOL MAGAZINE number of positions: 12 ELECTRICAL SPECIFICATIONS total power consumption: 39 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 3150 mm space requirements -front/back-: 2100 mm total height: 2100 mm total weight approx.: 4000 kg ATTA ...
: 3 multifix: ja weight: 2 t : 500 centre distance: 1300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A CNC twin-spindle lathe Gildemeister with a Y-axis is available. Bar capacity: 32mm, tool stations: 2x12, speed main and sub-spindle: 8000rpm, control: Siemens Sinumerik 840D Powerline, operating hours: 39426h, spindle hours: 25529h. Including coolant system, tools and short bar loader 1500mm Iemca Vip 80E. Documentation available. On-site inspection is possible. Expected to be available starting end of April 2026.
CNC control max. rod Ø: 26 mm Max. speed: 50 - 7,000 1/min 3 Cross-supports 6-station turret Bwjwvu Neyhd Aqsu Ijh IEMCA BOSS 432/32 N Bar Feeder Max. bar length: 3,200 mm
High-precision lathe DMG Mori Wasino G 100/480 Year of Make: 2017 Control: Fanuc COMPACT line Temperature response (cold start): ø 2.0 μm Roundness: 0.5 μm Technical data: Spindle speed: Drive power: Turning diameter: 285mm Turning length: 280mm Bar Passage: 38mm Travels: X-axis: 480mm Z-axis: 285mm Accessories - 3 pcs of powered tools - Package rigid tool holders - Fire extinguishing system - machine only ran under oil - Chip conveyors
Turrets: 2, tool stations: 12, tool holder: VDI 40, max. turning diameter: 320mm, max. swing diameter: 390mm, spindle bore: 61mm, speed: 5000rpm, spindle power: 15kW, travel X/Z: 230mm/430mm, machine dimensions X/Y/Z: 3900mm/2000mm/2900mm, weight: approx. 8600kg. Including robot. Documentation available. On-site inspection is possible.
A vertical large-format carousel turning machine TOS is available. Turning diameter cross rail support/side support: 1150mm/1000mm, max. workpiece weight: 3000kg, max. workpiece height: 900mm, travel X/Y/Z: 500mm/500mm/750mm, rotary table diameter: 1000mm, max. rotary table torque: approx. 8800Nm. Machine dimensions X/Y/Z: approx. 4100mm/3400mm/3100mm, weight: approx. 13500kg. Documentation available. An on-site inspection is possible.
A barely used cycle-controlled flatbed lathe Wagner with extensive accessories is available. Swing diameter over bed/face slide: 500mm/280mm, distance between centers: 1500mm, bed width: 350mm, speed: 3000rpm, travel X/Z: 295mm/1435mm, rapid traverse: 5m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm, quill diameter: 75mm, quill stroke: 150mm, quill taper: MK5, machine dimensions X/Y/Z: approx. 3300mm/1700mm/1700mm, weight: approx. 3000kg, control: Siemens Sinumerik 802C base line, operating hours: approx. 1702h. Including various tools, coolant system, tool holders, 3-jaw chuck and several Parat tool holders. Documentation available. An on-site inspection is possible.
turning diameter: - mm turning length: - mm control: - : ohne Gewähr total power requirement: - kW weight of the machine ca.: 4 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Tornos Model: Deco 10 +LNS Year of Manufacture: 1999-2010 Find more here - / Contact us at -
Conventional Meuser KM 2 engine lathe with lead screw and feed rod. Center height X/Y approx. 230mm/460mm, spindle bore: 62mm, speed range: 25-1600rpm, thread cutting: Meuser universal gearbox. Inspection by appointment possible.
A Meuser manual engine lathe including various holders, 3-jaw chuck and center punch is available.
Turning diameter over bed/face slide: 560mm/370mm, turning length: 2000mm, spindle bore: 90mm, speed: 1800rpm, dimensions X/Y/Z: approx. 3800mm/1700mm/2100mm, weight: approx. 3300kg, control: Bosch CNC Alpha 2000/2, operating hours: 60000. Including various holders, 3- and 4-jaw chucks.
Offered is a Traub TND 400. Center distance: 800mm, turning diameter approx. 250mm, travel X/Y approx. 220mm/850mm, spindle bore: 65mm, speed range: 40-4000rpm, 12-position disc turret, tool holder: VDI40 DIN69880, integrated coolant system, dimensions X/Y/Z approx. 3000mm/2000mm/2000mm, weight approx. 4300kg-4500kg. Inspection by appointment possible.
Variabele snelheid met frequentie verzenden Distance between centers: 1000 mm Swing over bed: 402 mm Swing over cross-slide: 380 mm Swing in gap: 560 mm Diametre of main spindle bore: 42 mm Power on main spindle: 4 kW Number of speeds: 40 > 2800 rpm Digital screen: yes Length: 2390 mm Width : 910 mm Height: 1625 mm Weight: 1190 kg
Key data: 800 mm, 4000 mm, 710 mm
Description, subject to prior sale. Conventional lathe Make: Trens (former TOS Trencin) Digital read-out Swing over bed 710 mm Swing up to 800 mm Distance between centres 4000 mm In good working condition. Machine can be inspected under power in German factory. Availability short-term. Further information, price, videos on request. Technical indications, subject to error.
Turning length: 4000mm, turning diameter over bed: 680mm, turning diameter over short cross slide: 480mm, turning diameter over long cross slide: 420mm, turning diameter in the gap: 880mm, swing diameter in the gap: 960mm, travel cross slide: 480mm, top slide: 230mm, tailstock quill: 280mm, center height over flat bed: 335mm, center height over prism top edge: 313mm, bed width: 560mm, diameter of tailstock quill: 125mm, Morse taper of center: no. 6. With upper support, steady rests, operating manual, digital readout and measuring system, Multifix tool holder. Machine is currently partially overhauled. An on-site inspection is possible.
CNC Swiss Automatic Lathe TRAUB TNL 32 9P With control TX 8 i - p Year of Make: 2016 Spindle bore: 32 mm MAIN SPINDLE Speed range: Max. 6400 rpm C Axis SUB-SPINDLE Speed range: Max. 6000 rpm C Axis TOOL TURRET TOP: Speed range: Max. 12000 rpm 10 speed turret ( All driven ) TOOL TURRET ABOVE: Speed range: Max. 12000 rpm 9 speed turret ( All driven ) REAR UNIT Number of stations: 8 Of which powered: 3 ( T 12 , 13 and 14 ) Speed T12 + T 14 ( 12000 rpm ) Speed T 13 : ( 4000 rpm ) With the following accessories: Full protection cab with interior lighting Various powered tools Various tool holders IEMCA Boss 338 Bar Feeder - HD KSS Pump 20 bar Chip conveyor Operating Instructions
Main spindle: max. bar capacity: 65mm, draw tube bore: 75mm, collet holder diameter: 160mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 150Nm, nominal power (S1): 22kW. Counter spindle: draw tube bore: 45mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 100Nm, nominal power (S1): 16.8kW. W2 axis counter spindle: travel: 690mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X1 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z1 axis: travel: 220mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X2 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z2 axis: travel: 150mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1) ...
8 axis version - 6Linear + 2 axes circular bar capacity 42mm Fanuc 160i IEMCA BOSS 545 E Driven Tools HD coolant system Bürener machine was operated with cutting oil!, Control type: CNC /
A CNC counter-spindle lathe Index with Y-axis and bar feeder MBL 42 is available. Turning length: 400mm, turning diameter: 420mm, bar capacity: 60mm, speed: 6000rpm, machine dimensions X/Y: 4750mm/1950mm. Documentation available. An on-site inspection is possible.
WEILER COMMODOR L&Z Spindle Lathe -Turning length 1000mm -Turning diameter max. 160mm Bar Passage 56mm -Speed range 25-2000 rpm -Automatic longitudinal/plane feeds - Thread: Metric/Inch/etc. -Tailstock Mk4 Hjbkn Au Ssun Ulhs Tsl -Three-jaw chuck approx. 250mm -Multifix base holder with insert -Coolant device -Electric lining protection -Swarf back wall -Machine documentation -Good operational condition Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg
Center height: 700 mm Center width: 1800 mm Gr. Circulation Ø over bed/in offset: 1300/1740 mm Rotary Ø over support slide: 740 mm 12 spindle speeds: 3 - 135 rpm 12 feeds: 0.15 - 2 mm/rev Upper support adjustment: 350 mm electr. Connection: 380 V, 6.6 kW Weight approx.: 5.5 t Space requirement: 3800 x 1600 x 1700 mm
Dispositif à tronçonner pour broche Schaublin 102 - Type F. Etat neuf, jamais utilisé, avec des traces de stockage. Für Spindel Schaublin 102 - Typ F. Zustand: neu, nie gebraucht, mit Lagerspuren.
1 x Schaublin 102 spindle for push clamps type F38, incomplete for spare parts 1 x Schaublin nut for F38 spindle nose, in good used condition. 1 x 8 F38 Clamps Diameter:14 - 15 -16 -17 - 18 -20 - 31 - 30. In very good condition, a new clamp (diameter 15), one used (diameter 16), one with traces of storage (diameter 18). 1 x Spindel Schaublin 102, für Druckspannzangen F38, unvollständig, für Ersatzteile. 1 x Mutter für Druckspannzangen Schaublin F38. 1 x 8 Druckspannzangen F38. Durchmesser: 14 - 15 -16 -17 - 18 -20 - 31 - 30. Durchmesser 15 mm ist neu ungebraucht, Durchmesser 16 mm sehr gebraucht, Durchmesser 18 mm mit Lagerspuren.
Table size 2400 mm Max turning diameter 2500 mm Max. workpiece height 1600 mm Max. workpiece weight 12000 kg Machine weight 54320 kg
Key data: 5000 mm, 8000 mm, 4000 mm
Berthiez Vertical Turning Lathe • Year of manufacture: 1982 • CNC type: older system (CNC axes) Dimensions and Working Parameters • Table diameter: 5000 mm • Maximum turning diameter: 8000 mm • Maximum turning diameter at center: 5000 mm • Maximum workpiece height: 4000 mm • Ram travel (T): 3600 mm • Saddle travel (TA): 650 mm Speed and Power • Table rotation range: 0.6 – 60 rpm • Table motor power: 140 kW • Maximum load on hydraulic support: 160 t • Ram feed speed: 400 mm/min • Saddle feed speed: 2500 mm/min • Spindle rotation for milling: 0.01 – 0.50 rpm • Positioning speed: 0.001 – 0.50 rpm Tool Carriages 1. Hand-Operated (Primary) Carriage • Kulannum section size: 360 × 360 mm • Axial travel (CA): 2500 mm • Horizontal travel (CB): 3400 mm • Tilt range (E-F): 15° – 45° 2. Side Tool C ...
control: Haas Automatic : 3 Backen x-travel: 850 mm changer: 12 fach serial number: 70422 total power requirement: 22 kW weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre distance: 1500 mm : 210 serial number: 1289 multifix: ja : ja weight: 1,45 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 4000 mm width: 1800 mm height: 1800 mm : 5000 x-travel: 600 mm tail stock: ja tool adaptor: VDI 30 weight of the machine ca.: 5,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: Fanuc length: 3700 mm width: 1850 mm height: 2000 mm accessories:: ja weight of the machine ca.: 4,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 230 mm turning diameter over bed: 970 mm turning diameter over slide rest: 720 mm Control: Fanuc OiTD turning length: 2200 mm total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m Year of manufacture 2013 Control: Fanuc OiTD Other controls possible Turning length (mm) 2200 Max. turning diameter (mm) 970 Max. turning diameter over slide (mm) 720 Spindle diameter (mm) 230 Diameter range (mm) 850 Speed: 500 kW 37 Voltage: 400V Hz 50 Including: 4-jaw chuck, Ø 800 mm rear Pneumatic 3-jaw chuck, Ø 600 mm front The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your worksh ...
Cycles lathe Microturn BNC 1840 Description: Sell our very well preserved cycles lathe Microturn BNC 1840 with turning length 1000mm and FAGOR 8055i control. Technical data: - Tip height 230mm - Max. turning length 1000mm - Speed max. 4500 1/min
A CNC slant bed lathe Okuma is available. Chuck diameter: 200mm, swing diameter: 400mm, turning diameter: 300mm, turning length: 470mm, tool stations: 8. Machine dimensions X/Y/Z: approx. 4000mm/2150mm/2150mm, weight: approx. 5500kg, control: OSP 3000 L. Documentation available. An on site inspection is possible.
Vertical lathe Hessapp DVH 250 BJ 2004 (already dismantled)
Inv. Num. : 8986 Type: DH-250/4 Producer: WMW Created: 1983 Parameters: Length: 3400 mm Width: 2100 mm Height: 1600 mm Weight: 4800 kg
faceplate diameter: 1400 mm swing diameter: 1600 mm turning height: 1200 mm turning speed range - milling: 1 - 240 U/min Control: Siemens SIN 820T ram head - cross travel: 1000 mm total power requirement: 55 kW weight of the machine ca.: dimensions of the machine ca.: m A.T.C. 12 positions Tooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 550 mm turning length: 3100 mm control: Fagor 8055T turning diameter over slide: 310 mm turning dia. in gap: 790 mm length of gap: 283 mm spindle passage: 51 mm turning speeds: 80-3500 U/min Power: 15 KW 3-jaw chuck: 250 mm steady: 220 mm workpiece weight: 2000 kg The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS ...
turning diameter: 550 mm turning length: 1100 mm control: Fagor 8040T turning diameter over slide: 230 mm turning dia. in gap: 740 mm length of gap: 350 mm spindle passage: 72 mm turning speeds: 100-4500 U/min Power: 7,5 KW 3-jaw chuck: 250 mm steady: 220 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution ...
turning diameter: 660 mm turning length: 2000 mm control: Fagor 8050 turning diameter over bed slide: 370 spindle diameter: 104 mm total power requirement: 18 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 1800 mm turning height: 1600 mm turning diameter over bed: 2150 mm turning speeds: 3,15 - 250 U/min voltage: 400 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 2000 mm turning diameter over slide rest: 1050 mm turning length: 7000 mm speed: 1,6 - 250 U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: max.: 4000 mm turning diameter over slide rest: . mm turning length: 7700 mm speed: 0-750 u/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 2400 mm turning length: 6000 mm control: Siemens 880T Turning diameter over slide: 1400 spindle diameter: 320 mm speed: 0.4 - 1000 m/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 2500 mm swing diameter: 2700 mm turning height: 1600 mm turning speed range - milling: 1,18 - 32,5 U/min turning speed range - milling: 4,25 - 117 U/min workpiece weight: 10000 kg side head - cross travel: 800 mm ram head - cross travel: 45 degrees - 1000 mm ram head - cross travel: 30 degrees - 1000 mm total power requirement: 80 kW weight of the machine ca.: t dimensions of the machine ca.: m 2-Axis D.R.O. 5 positions turret The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 1930 mm turning diameter over slide rest: 1520 mm turning length: 5000 mm turning speeds: 0,5-250 U/min spindle bore: 105 mm workpiece weight: 35 t steady: 400-700 mm steady: 700-1200 mm steady: 1000-1600 mm control: Siemens total power requirement: 106 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Mark ...
turning diameter: 400 mm turning length: 1000 mm control: FAGOR control: CNC 8055/B-T centre height: 200 mm centre distance: 1000 mm turning dia. over face-slide: 210 mm bed width: 300 mm spindle bore: 65 mm spindle turning speed range: 0 - 3000 U/min transmission ratio: 2 feeds - longitudinal: 0 - 10.000 mm/min feeds - cross: 0 - 10.000 mm/min rapid travel - longitudinal/face: 15 m/min tailstock quill diameter: 68 mm tailstock quill stroke: 155 mm tailstock taper MT: 4 total power requirement: 8 kW weight of the machine ca.: t dimensions: 3,1 x 1,9 x 1,78 m Accessories: 3-jaw chuck 200 mmø, MULTIFIX-tool post with various inserts, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 220 mm turning length: 250 mm control: SIEMENS SINUMERIK 820 T swing diameter: 380 mm chucking diameter: 250 mm x-travel: 200 mm z-travel: 250 mm spindle turning speed range: bis 4000 U/min rapid travel - longitudinal/face: 15 m/min total power requirement: 27,5 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,2 x 2,9 x 2,2 m acc.: hydr. 3-jaw chuck, various tool holders for turret, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : Bulgarien : 91920 € : 1737.29 € : 860 mm : 3000 mm : 430 mm : 135 mm : 620 mm : 560 mm : 11 : 140 M : 7 - 42, 28 - 170, 165 - 1 U/Min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 240 : 435 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 4650 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low volt ...
maximum number of results exceeded
please refine your search
