lathe and milling used for sale

greates pass round over bed: 350 mm swing diameter over face slide: 200 mm centre distance: 800 mm centre height: 175 mm turning length: 700 mm 3-jaw chuck: Röhm Ø 160 spindle bore: 46 mm spindle head: Gr. 5, DIN55027 number of spindle speeds: 18 spindle turning speed range: 31,5-2500 U/min tailstock quill taper MT: 3 weight of the machine ca.: 1000 kg 3-axis digital readout manual included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning length/ centre width 4m, Spindle inner diameter, Face Plate D 1000 m, Center height over support 360 mm, 2 Risings with roller jaw guide 1980 Retrofitted, Main spindle speed 215 - 355 rpm. Operations manual with circuit diagram, chip protection, Reversible steel holders, Supports have currently been overhauled, electric lock box, Weight approx. 15 tons, Guided tour possible, including attempted filming.

turning diameter over bed: 297 mm turning diameter over bed slide: 160 turning length: 500 mm short taper holder: Größe 5 spindle bore: 36 mm spindle turning speed range: 30-3550 U/min number of speeds: 18 quill adjustment: 90 mm tailstock quill taper MT: 3 cross adjustment: +15 tailstock adjustment - manual: 500 mm total power requirement: kW weight of the machine ca.: 610 kg dimensions of the machine ca.: 1,4 x 0,7 x 1,2 m wedge bar chuck Forkardt: Ø 160 mm Accessories: Forkardt V-block chuck, Ø 160 mm Collet chuck, Collets, Steel Multifix system, size A with 3 quick-change inserts Integrated center point Chip guard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 340 mm turning diameter over slide rest: 177 mm turning length: 630 mm spindle turning speed - stepless: 55-3000 U/min weight of the machine ca.: 1.55 t dimensions of the machine ca.: 2 x 1 x 1.6 m Digital read-out HEIDENHAIN Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm : 215 mm : 1000 mm : 180 mm : 42 mm : 2,25/3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm : 215 mm : 1000 mm : 180 mm : 42 mm : 3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0560 mm : 390 mm : 2000 mm : 280 mm : 80 mm : 11,25 kW spindle turning speed - stepless: 20-2000 U/min spindle taper: K 8 DIN 55027 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: mm turning diameter over slide rest: mm turning length: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 455 mm turning diameter over slide rest: 285 mm turning length: 1.000 mm center height over bed: 225 mm centre distance: 1.000 mm digital readout: 2-Achsen ANILAM bed width: 330 mm spindle taper: KK 6 DIN 55027 spindle bore: 45 mm turning speed range: 16 - 1.000 U/min power requirement: 3,0 / 4,2 kW taper in tailstock-quill: MK 4 dia. of quill: 62 mm quill stroke: 145 mm coolant: voltage: 400 V total power requirement: 4,5 kW weight of the machine ca.: 1,95 t dimensions of the machine ca.: 2,45 x 1,10 x 1,80 m - Serial-No.: 29-2561 - ANILAM 2-axis digital readout - 4-jaw tool holder - coolant equipment ATTENTION! Machine is sold without a chuck. Upon request and for an additional charge, the following 3-jaw spiral chucks can be included: - CENTER Ø 200 mm = 780.00 EUR - CENTER Ø 250 mm = 1,030.00 EUR The data for this ad was created with ModulMWS - the sof ...

turning diameter over bed: 500 mm turning diameter over slide rest: 330 mm turning diameter in the gap: 600 mm turning length: 3000 mm bed width: 505 mm spindle bore: 72 mm spindle head: DIN 55022 Gr. 8 taper in tailstock: MK 5 turning speed range: 22,4- 1120 U/min power requirement: 18,5 kW dimensions: 5,3 x 1,75 x 1,53 m weight of the machine ca.: 5,2 t used lathe in nice condition with digital scale - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm - Multifix C toolholder system - some toolholders - steady The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 390 mm turning diameter over slide rest: 190 mm turning length: 1000 mm turning dia. in gap: 460 mm spindle head: DIN 55026 Gr. 6 spindle bore: 52 mm turning speed range: 11,2 - 2240 U/min power requirement: 7,5 kW bed width: 355 mm dimensions: 2,8 x 1,3 x 1,6 m weight of the machine ca.: 1,9 t Equipment: - Multifix B with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jaws The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 480 mm turning diameter over slide rest: 260 mm turning length: 1500 mm turning diameter in the gap: - mm turning speeds: 90 - 1120 U/min centre height: 240 mm spindle bore: 52 mm total power requirement: 7,5 KW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 3,0 x 1,3 x 1,5 m Engine Lathe - 3-jaw chuck (200 mm) - Quick-change tool post - Steady rest - Machine lamp - Chip tray - Center point The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 450 mm turning diameter over bed: 245 mm turning diameter over slide rest: 135 mm spindle bore: 23.0 mm tool adaptor: DIN 55021-4 quill:: 2 MK quill travel: 80.0 mm turning speeds: 60 - 3000 U/min bed width: 155 mm total power requirement: 1.2 / 1.5 kW voltage: 380 V weight of the machine ca.: 340 kg. range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout D60- ...

turning length: 450 mm turning diameter over bed: 245 mm turning diameter over slide rest: 135 mm spindle bore: 23.0 mm tool adaptor: DIN 55021-4 quill:: 2 MK quill travel: 80.0 mm turning speeds: 60 - 3000 U/min bed width: 155 mm total power requirement: 1.2 / 1.5 kW voltage: 380 V weight of the machine ca.: 340 kg. range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout D60 ...

Leit & Tension Spindle Lathe WEILER COMMODOR 180 GSD / New -Unused -Exhibition machine / zero operating hours -CE marking -3 - Axis Digital Display -Tip width 1000mm -Tip height 180mm -Spindle passage 56mm -Circumferential diameter over bed 380mm -Circumferential diameter via face slide 215mm -Speed range / gearbox 25-2000 rpm -Automatic longitudinal/plane feeds -Thread/Inch/Metric/Diametrical -Tailstock / quill cone MK 4 -Quill stroke 150mm -Coolant device -Multifix with insert -Three-jaw chuck 200mm -Work light -Swarf back wall -Documentation Dimensions: LxWxH 2.6x1.6x1.7 meters / Weight 2000Kg

Leit & Pull Spindle Lathe "DREHMA - D410x1500mm -Demonstration machine - year 2025 -CE - Identifier -Digital display -Turning diameter over bed 410mm -Turning length 1500mm -Turning diameter over support 255mm -Turning diameter in the offset 580mm -Spindle Passage 52mm -Speed range 45-1800 rpm -Automatic longitudinal/plane feeds -Thread/Inch/Metric etc. -Tailstock Mk4 -Central lubrication -Drive power 3.5 KW -Fixed / Rotating bezel -Multifix holder with 4x inserts -Three-jaw chuck 200mm Hsbknowatv Ss Au S Tel -Four-jaw chuck 250mm -Face Plate -Lining protection -Front safety device -Coolant device -Work light -Running tip -Machine feet Dimensions: LxWxH 2.5x1x1.6 meters / Weight 1800Kg

WEILER CONDOR VS 2 from university (test laboratory) -Guided tours "as good as new" -Three-axis digital display "NEW" -Tip height 165mm -Circumferential diameter over bed 330mm -Tip width 800mm -Speed range 28-2800 rpm -Automatic longitudinal/plane feeds -Spindle passage 40mm -Thread/Metric/Inch etc. -Collets - quick clamping device incl. collets -Vierbackenfutter-Röhm -Face Plate -Four-jaw chuck faceplate -Lining protection -Multifix with inserts -Emergency stop -Documentation -Unless otherwise stated, the price is /net/ plus VAT -Invoice will be issued Dimensions: LxWxH 2x0.8x1.6 meters / Weight 900Kg

Optimum Lathe D330 x 1000 SG -Center width: 1000 mm -Circumferential diameter over bed: 330 mm -Circumferential diameter over support: approx. 190–200 mm -Spindle bore: approx. 38 mm -Spindle mount: Camlock (mostly D1-4) -Speed range: approx. 70 – 2000 rpm (stepped) -Feeds: longitudinal and flat, automatic -Threading: metric and imperial possible -Motor power: approx. 1.5 – 2.2 kW -Voltage: 400 V / 3 phases -Tailstock mount: MK3 - Spindle holder: MK5 -Work light -Three-jaw chuck -13x Face Plates/Drive Plates -Multifix with 1 steel holder -Machine feet -Lining protection Dimensions: LxWxH 1.9x0.7x1.5 meters / Weight 700Kg

Hamlet of Commodor B -GS - Identifier -3 - Axis digital display "NEW" - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Four-jaw chuck - Electric lining protection -2x Emergency / Off -Swarf back wall -Coolant device - Work light - Multifix with inserts -Documentation

Weiler Commodor B incl. 3 - axle digital display /Heidenhain - GS - Identifier - 3 - Axis digital display - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Three-jaw chuck - Feed protection - 2x Emergency / Off - Swarf back wall - Multifix with inserts -Machine feet - Documentation Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Lead & Pull Spindle Lathe EXCELLO - DLZ 500 SL -Tip height 250mm -Turning diameter over bed 500mm -Turning diameter over support 310mm -Center width 3000mm -Rod passage 65mm -Speeds: 28-1400 rpm -Automatic longitudinal/plane feeds -Three-jaw chuck 250mm -Four-jaw chuck 250mm -Multifix base holder with inserts -Bezel -Tool cabinet -Documentation Dimensions: LxWxH 5.5x1.4x1.6 meters / Weight 3500Kg

L & Z lathe / WEILER DA 210x1000 / With new 3-axis digital display -Year of construction 2005 -CE - Identifier -Guided tours good -COMPLETE TECHNICAL DATA SEE PHOTOS - Three axis digital display "NEW" -Quick-release collet device incl. 79 x collets (173E) -Multifix base holder with inserts -Three-jaw chuck -Electric lining protection -Slide protection additionally -Coolant device -Drill chuck / rotating tip -Swarf back wall -Work light -Complete documentation Dimensions: LxWxH 2.8x1.2 x1.8 meters / Weight 1600 Kg

Weiler Primus Type-MD-G -Tip height 125mm -Tip width 400mm -Speed range 80-4000 rpm -Spindle passage 24mm -Electric lining protection -Tailstock with drill quill -Work light -Four-jaw chuck -Multifix with inserts -Bed stop Dimensions: LxWxH 1.3x0.8x1.5 meters / Weight 400Kg

Offer 26143 Technical data: - Tip height 165 mm - Center width 750 mm - Turning diameter over bed 330 mm - Turning diameter via face slide 170 mm - Spindle bore 42 mm - Pick-up cone of the tailstock quill MK 3 - Travel of the tailstock quill 140 mm - Spindle speeds 18 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V / 1.5 / 2.8 kW - with: - 2 pieces 3 jaw chucks - Bezel - 4 pieces SWS steel holder - Div. Drehmeisel - Space requirement approx. W 1800 x H 1150 x D 900 mm - Weight approx. 800 kg

Guide & Tension Spindle Lathe GEMA LZ 200 -Three - Axis Digital Display "NEW" -Guided tours " VERY GOOD" -Tip height 200 mm -Center width 1000 mm -Turning diameter over bed 400mm -Turning diameter over support 200mm -Spindle passage 54 mm -Automatic longitudinal/plane feeds -Speed range 36-2200 rpm -Tailstock MK 4- Adjustment 200mm -Three-jaw chuck 250mm -Electric lining protection -Multifix with inserts -Coolant device -Work light -Machine feet -Chip tray Dimensions: LxWxH 2x1.2x1.6 meters / Weight 1800Kg

WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Three-jaw chuck 160mm -Lining protection -Swarf back wall with work light -Interchangeable wheels -Drill chuck -Rod passage 42mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg

WEILER LZ330 / From educational institution incl. new 3-axis digital display -Turning diameter over bed 330mm -Turning diameter over support 165mm -Turning length 800mm -Speed range 25 - 2800 rpm -Automatic / longitudinal plan feeds -Multifix with 3x inserts -Drive power 3KW -Three-jaw chuck -Collet device with 20x collets -Copying device -Miscellaneous Accessories -Documentation Dimensions: LxWxH 1.8x0.7x1.6 meters / Weight 750Kg

L & Z lathe / WEILER CONDOR VS 2 with new 3-axis digital display from training company -3-axis digital display "NEW" -Tip height 165mm -Circumferential diameter over bed 330mm -Tip width 800mm -Speed range 28 - 2800 rpm -Automatic longitudinal/plane feeds -Spindle passage -Tailstock with tip -Collets / quick-release device incl. 25 x collets -Three-jaw chuck - Röhm 200mm with reverse jaws -Multifix /New with insert -Work light -Emergency / Off -Bed stop -Machine feet -Documentation Dimensions: LxWxH 2x0.8x1.6 meters / Weight 900Kg

VOEST DA 360 - Lead & Pull Spindle Lathe -Heidenhain digital display -Peak height above bed 400mm -Turning diameter over bed 800mm -Turning diameter over support 500mm -Turning length 1000mm -Rod passage approx. 87mm -Speed range 14 - 1000 rpm / 18x speeds -Automatic length / face feeds -Automatic input Z-axis -Tailstock MK 5 -Wedge bar chuck 250mm -Multifix base holder with insert -Work light -Machine feet -Documentation Dimensions: LxWxH 3x1.5x1.7 meters / Weight 3500 KG

GALLIC 16 N lead and pull spindle lathe with ACU-Rite digital display - Turning diameter over support 200mm - Turning diameter over bed 320mm - Tip height 160mm - Center width 1000mm - Speed range 45-2500 rpm - Spindle bore 40mm - Automatic feeds X/Z axis -Spindle bore approx. 42mm -Quick-change holder -Thread/Metric/Inch etc. -Tailstock MK 4 -Electric lining protection -Three-jaw chuck -Swarf back wall LxWxH 2.4x1x1.7 meters / Weight 1600Kg

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Wedge bar chuck Forkardt F 160 -Quick-change holder rotary flash -4 lathe chisel holders Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Wedge bar chuck Forkardt F 160 -Quick-change holder Multifix -4 lathe chisel holders -Drill chuck -Moving centering tip Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Collet device -Wedge bar chuck Forkardt F 16 -Quick-change holder Multifix -4 lathe chisel holders -Drill chuck -Moving centering tip Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

Key data: 410 mm, 800 mm

TECHNICAL DATA Lathe Weisser Heilbronn Model No.: SENIOR Y.O.M. 1984 Centerheight 410 mm Swing over bed 810 mm Swing over Support 564 mm Spindle bore 105 mm max Workpieceweight between chuck and Pinole 22 tons Spindlerevolotions 8 -- 1250 Rev/min Main motor 15 kW Rapid traverse longitudinal 4 Jaw chuck 700 mm Moving Protection for guideaways longitudinal Digital Read Out 1 Steady Rest 0 - 130 mm Quick change Toolpost with inserts Coolant

Offer 26083 Technical data: - Center height / center width 210 / 1500 mm - Largest rotary, Ø over bed / over face slide 420 / 270 mm - Largest turning diameter with removed bridge 640 mm - Length of the bed bridge approx. 270 mm - Spindle bore 58 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 180 mm - Spindle speeds 45 - 1800 rpm - Feeds - longitudinal 0.031 - 1.70 mm/rev - Flat 0.14 - 0.784 mm/rev - Travel of the upper slide 128 mm - Face slide travel 285 mm - Metric thread pitches - Inch thread - Drive 400 V / 7.5 kW - with: - tailstock, 3-jaw chuck, quick-change steel holder, - Digital display - Space requirement approx. W 2850 x H 1500 x D 1200 mm - Weight approx. 2000 kg

turning diameter: 360 mm turning length: 1000 mm swing diameter over bed slide: 215 mm reus: 30 - 3000 U/min spindle bore: 38 mm feed: längs 0,043 - 0,653 m/min total power requirement: 3,5 kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: 1900 x 900 x 1300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26156 Technical data: - Center height 120 mm - Center width 450 mm - Largest circulation – Ø over bed 250 mm - Spindle bore 23 mm - Spindle mount with threaded nose DIN 55027 - Mounting cone of the tailstock quill MK 2 - 20 spindle speeds 60 - 3000 rpm - Feeds - longitudinal 0.03 - 3.0 mm - Flat 0.015 - 0.150 mm - Thread pitches 0.25 - 5 mm - Drive 400 V / 1.1 / 1.5 kW - Space requirement approx. W 1200 x H 1250 x D 650 mm - Weight approx. 700 kg - with: - 3-jaw chuck, - Quick-change steel holder Multifix with 3 inserts - Moving grain tips - Collet set

turning diameter over bed: 460 mm turning diameter over slide rest: 260 mm turning length: 1500 mm turning diameter in the gap: 600 mm turning speeds: 22 - 1500 U/min centre height: 230 mm spindle bore: mm total power requirement: 6,5 KW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,8 x 1,2 x 1,5 m Centre lathe - Forkardt F200 3-jaw chuck - Multifix quick-change tool post - Steady rest - Chip tray - Tailstock centre The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 46970 € : 897.13 € : 500 mm : 1500 mm : 250 mm : 80 mm : 300 mm : 400 mm : 8 : 80 MK : 21 : 20-2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 240 - 1 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 7.5 kW : 3100 mm : 1250 mm : 1400 mm : 2820 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 45610,00 turning length2.000 mm  ...

: neu : Bulgarien : 96240 € : 1818.94 € : 860 mm : 3000 mm : 430 mm : 135 mm : 620 mm : 560 mm : 11 : 140 MK : 7 - 42, 28 - 170, 165 - 1 U/Min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 240 : 435 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 4650 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low vol ...

turning diameter over bed: 670 mm turning diameter over slide rest: 420 mm turning length: 2200 mm turning diameter in the gap: mm turning speeds: 7,1 - 1400 U/min centre height: 340 mm spindle bore: 130 mm total power requirement: 22,0 KW weight of the machine ca.: 5,2 t dimensions of the machine ca.: 4,75 x 1,8 x 1,7 m Centre lathe - Forkardt F400 3-jaw chuck - Feed on top slide - Coolant system - Multifix tool post - 4 Multifix tool holders - Rapid traverse - Steady rest - Machine light - Live centre - 2 chip trays - Chip guard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 500 mm turning diameter over slide rest: 320 mm turning length: 1500 mm turning diameter in the gap: mm turning speeds: 33 - 1500 U/min centre height: 250 mm spindle bore: mm total power requirement: 5,5 KW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2,8 x 1,2 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : Bulgarien : 26210 € : 500.61 € : 325 mm : 750 mm : 165 mm : 32 mm : 190 mm : 200 mm : 5 : 4,5 MK : 2 : 85-405, 470-2200 U/Min : 48 : 0.006 - 1.77 mm/U : 0.003 - 0.885 mm/U : 0.1 - 28 mm : 0.1 - 1.75 : 70 - 4 : 150 mm : 95 mm : 40 mm : 3 MK : 100 mm : 2.2 kW : 2150 mm : 950 mm : 1350 mm : 770 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 26.730,- The data for this ad was created with ModulMW ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 53250 € : 1006.43 € : 500 mm : 1500 mm : 250 mm : 75 mm : 300 mm : 400 mm : 8 : 80 MK : 3 : 25-100, 100-400, 500-2000 U/Min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 60-1/4 Gänge/ : 0.125 - 30 : 240-1 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3100 mm : 1250 mm : 1400 mm : 2800 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS:  ...

turning diameter over bed: 340 mm turning diameter over slide rest: 260 mm turning length: 700 mm spindle bore: 48 mm spindle turning speed range: 25 - 2000 U/min spindle nose: DIN 55027 KK 5 voltage: 380 Volt total power requirement: 2,2/4,4 kW weight of the machine ca.: 1000 kg. dimensions of the machine ca.: 1.800 x 700 x 1.500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mm turning diameter over slide rest: 170 mm turning length: 800 mm turning speed range: 24 - 2800 U/min spindle bore: 38,0 mm centre height: 155 mm tool adaptor: DIN 55022 total power requirement: 3,0 kW weight of the machine ca.: 850 kg. dimensions of the machine ca.: 1,9 x 0,7 Höhe: 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : Bulgarien : 121770 € : 2301.45 € : 1090 mm : 3000 mm : 500 mm : 155 mm : 690 mm : 700 mm : 15 : 160 MK : 24 : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 22 kW : 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS turning length1.500 mm € 107020,00 turning length2.000 mm € 110650,00 turning length4.000 mm € 130410,00 turning length5. ...

spindle bore: 58,0 mm turning diameter: 430 mm turning length: 760 mm turning dia. in gap: 690 mm turning diameter over slide rest: - mm centre height: - mm turning speeds: 20 - 2000 U/min quill:: 4 MK bed width: 300 mm total power requirement: - kW weight of the machine ca.: 1700 kg Features: - Digital display - 3-jaw chuck - Multifix steel holder - Removable bridge - Machine light - Chuck guard - Instruction manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1000 mm turning diameter: 330 mm turning dia. over face-slide: 198 mm turning dia. in gap: 476 mm spindle bore: 38.0 mm turning speeds: 70 - 2000 U/min bed width: 180 mm spindle taper: DIN ISO 702-2 Nr. 4 taper in tailstock: 3 MK quill travel: 110 mm total power requirement: 1.5 kW weight of the machine ca.: ca. 610 kg. range L-W-H: 1930 x 755 x 1300 mm Features - Ideal for technical schools, repair shops, and training workshops - Modern main spindle bearing assembly with precision-grade angular contact ball bearings - Single-lever chuck for the tailstock, adjustable for taper turning - Hardened and ground gears and shafts in the gearhead - Optimally suited for machining steel, non-ferrous materials, and plastics - Removable bridge for machining workpieces with large . diameters - To minimize the effects of vibration, the solid prismatic bed . is additionally equipped wit ...

turning diameter over bed: 350 mm turning diameter over slide rest: 216 mm turning length: 1000 mm turning diameter in the gap: 550 mm turning speeds: 40 - 1800 U/min centre height: 170 mm spindle bore: 40 mm total power requirement: 4,0 KW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 2,0 x 0,85 x 1,6 m Centre lathe (lead screw and feed rod) - Digital readout - 3-jaw chuck (160 mm) - Spare jaws - Coolant system - Multifix tool post - 4 Multifix tool holders - Steady rest - Live centre - Chip tray - Chuck guard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.