141,821 used machines on RESALE, but how to find them? Machine Search
Special set 31 pieces, 28mm system, consisting of: 1x Tool Trolley 10x Staking Bolts 10x Ball Lock Pin 3x Professional Screw Clamp, 300 x 150mm 3x Professional Screw Clamp, 300 x 200mm 2x Professional Pipe Screw Clamp 180° 2x Professional Pipe Screw Clamp 45° Material: Burnished quality steel ATTENTION Tool is designed for 25mm table top thickness. Number of 96 Lots Weight 600 kg Hole diameter 28 mm Condition: new / unused Auction-ID: A7-52321-132
Welding table / straightening table - Panel thickness 80mm - Panel thickness incl. frame 360mm Table length 4900 mm Table width 1300 mm Table height 980 mm Machine weight approx. 5.6 t Dimensions L x W x H 5.0 x 1.3 x 0.6 m Condition: functional Auction-ID: A7-52321-34
Wire diameter 0.6mm/0.8mm/0.9mm/1.0mm/1.2mm. Includes: (1x) hose package and welding torch, (1x) drawer with accessories and (1x) welding helmet. Auction-ID: A1-51283-57
Welding-turning-tilting table - Wireless remote control - 2 x welding current transmission Table diameter 1000 mm Table load 1200 kg Swivel range 0 - 135 degrees Speed 0.1 - 1.0 rpm Total power requirement 1.5 kW Machine weight approx. 0.8 t Condition: new / unused Auction-ID: A7-52321-74
Welding turntable with - Footswitch - Tilting/swivelling by hand - Speed infinitely adjustable - Welding current transmission - Hole in face plate 30mm, 20mm deep. - Documentation in English only. Table diameter 330 mm Table load 350 kg Swivel range 135 degrees Tilt adjustment: manual/mechanical manual Speed max. 5 rpm infinitely variable Table load 120 kg. Vertical Total power requirement 0.125 kW Condition: new / unused Auction-ID: A7-52321-70
1x Goldarc 2, 1 mm, 250 kg, 1x V3L5, 1 mm, 250 kg, in tons Auction-ID: A1-50970-66
Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-52172-334
Welding turntable incl. - Chuck 315mm - Torch holder with 3 axes - Cutting torch - Machine base Chuck diameter 315 mm Table load 300 kg Speed 0.1 - 4.0 rpm Connection voltage 220 V Passage diameter 63 mm Weight 0.09 t Dimensions LxWxH 0.8 x 0.6 x 1.2 m Condition: functional Auction-ID: A7-52321-223
2x 100 kVA, working width 900 mm, 6 welding points, equipped with input unit, output belt, 3 door control box, various accessories, from 1 cabinet, wall rack and on 2 carts Auction-ID: A1-50970-45
Welding table on lift table: Hole diameter: 28mm The table is made of 15mm thick steel S355 The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Sidewalls 150 x 10mm Ribbed underside for reinforcement. Table length 1300 mm Table width 800 mm Load capacity 1000 kg Lifting height 510 - 1550 mm Total connected load 1.5 kW Connection voltage 230 V Machine weight approx. 0.55 t Condition: new / unused Auction-ID: A7-52321-27
5 pcs screw clamps for hole diameter 28mm Projection max. 245mm Handle made of aluminium see pictures Condition: new / unused Auction-ID: A7-52321-198
The inverter welding machine is used for MIG/MAG welding. The welding machine uses a high-power IGBT to transmit frequencies from 50/60 Hz to 20 kHz. The advantages of the welding machine include, among others, energy savings and the possibility of automatic correction of voltage pulsations, low sparking formation, high duty cycle Auction-ID: A7-52172-286
Welding table with accessories: - Table size: 2400x1200x200 mm - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Bore Ø 28 mm - Holes surface 100x100 mm grid - corners, Edges and holes chamfered 45° - Height of sidewall 200 mm - Holes sidewall in diagonal grid - Construction reinforced by ribs Accessories: - 6x 280610.N Screw clamp - 12x 280511 quick-release bolts - 8x 280420.N Universal Stop - 2x 280110.N stop and clamping angle - 2x 280162.N stop and clamping angle - 1x 283999 care set Table length 2400 mm Table width 1200 mm Table height 850 mm Height adjustment 50 mm Machine weight approx. 0.99 t Condition: new / unused Auction-ID: A7-52321-14
Welding fume extraction consisting of: (1x) welding fume arm NEX MD 160, 4m, (1x) filter with wall bracket, (1x) Exhauster Auction-ID: A1-51283-60
Welding turntable with - Quick-release chuck 65mm - Footswitch - Tilting/swivelling by hand - Speed infinitely adjustable Table diameter 180 mm Table load horizontal 10 Kg Table load vertical 5 Kg Chuck diameter 65 mm Speed 2 - 10 rpm Swivel range 90 degrees Tilt adjustment: manual Connection voltage 230 V Machine weight approx. 15 kg Space requirement approx. 400 x 400 x 400 mm Condition: new / unused Auction-ID: A7-52321-82
Thickness 3 cm, Attention: Without the 8 adjustable feet on the picture. Including the 8 adjustable feet on the pallet. Auction-ID: A1-51945-18
MAG welding machine with: Hose package 3m Welding current max. 250 A Connection voltage 400 V Weight 170 kg Dimensions LxWxH 700 x 450 x 750 mm Condition: used and unchecked Auction-ID: A7-52321-211
Basic set 1 / 24 pieces for table top thickness 15 and 25mm 4 pcs clamps clamping height 300mm, Variable radius 8 pcs clamping bolts 2 pcs stop 100mm 4 pcs stop 150mm 2 pcs stop 225mm 1 Burner Holder 1 pc. hole brush 30mm 1 pc separating lotion 500ml 1 pc. welding table cleaner on natural, organic base 500ml Number of 24 Positions Weight 22 kg Condition: new / unused Auction-ID: A7-52321-189
Special set 102 pieces, 28mm system incl. tool trolley Material: Burnished quality steel Scope of delivery see pictures Number of 102 Lots Weight 320 kg Condition new Hole diameter 28 mm Dimensions L x W x H 1.0 x 0.6 x 0.85 m Condition: new / unused Auction-ID: A7-52321-197
Inverter TIG Welding Machine Rogue ET 180i CE TIG DC An excellent high-frequency TIG ignition ensures a error-free welding start, as well as uniform and stable Arc characteristics. Technical data: Primary voltage, 1-phase 230 VAC ±15%, 1 Ph, 50/60 Hz Maximum welding current 180 A Nominal apparent power in kVA 8 kVA Power saving mode: 30 W Open circuit voltage 63 V DC Current range 10-180 A Operating temperature -10 to +40 °C Enclosure protection class IP23S CE mark Dimensions, L x W x H 403 x 153 x 264 mm Weight 8.7 kg Scope of delivery: Shoulder strap, 4 m TIG torch type SR-B 26, a set of wearing parts, including tungsten electrode 2.4 mm and 3 m workpiece cable with clamp Condition: new / unused Auction-ID: A7-52321-205
Mobile Welding Lift Table/Perforation Table: Hole diameter: 28mm Hole spacing 100mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Ribbed underside for reinforcement. Table length 1200 mm Table width 800 mm Hole diameter 28 mm Table height 450 - 800 mm Load capacity 500 kg Machine weight approx. 0.8 t Condition: new / unused Auction-ID: A7-52321-72
MIG/MAG welding machine with: Hose package Ground cable Set of welding nozzles Welding current max. 200 A Open circuit voltage 14 - 24 V Connection voltage 230 V Weight 25 kg Dimensions LxWxH 500 x 200 x 300 mm Welding wire not included Condition: new / unused Auction-ID: A7-52321-109
Set 5: 125 pieces, 28mm system, consisting of: Ferrules: 14 x 280610.N Ferrules: 10 x 280630.N Prism: 6 x 280648.1.N Bolts: 36 x 160511 Magnetic Bolt 8 x 280740 Stop: 12 x 280410.N Stop: 12 x 280420.N Stop: 4 x 280430.N Angle: 12 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280164.N Angle: 1 x 280165.N Angle: 1 x 280166.N Angle: 1 x 280167.N Angle: 1 x 280144.N Angle: 1 x 280146.N Trolley: 1 x 280910 Accessory set. 1 x 283999 Number of 106 Lots Weight 283 kg Condition new Hole diameter 28 mm Condition: new / unused Auction-ID: A7-52321-165
Welding table / hole table with accessories: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Pictured accessories included! Surface flatness 0.2 - 0.4mm to 1000mm. Very stable base, This allows the table with pallet truck. Table length 2400 mm Table width 1200 mm Table height 850 - 900 mm Machine weight approx. 0.65 t without pallet truck Condition: new / unused Auction-ID: A7-52321-114
Equipped with perforated top, with various accessories Auction-ID: A1-50970-37
Equipped with machine accessories and various with mobile workbench with lighting, size approximately 1000x3000x2100mm Auction-ID: A1-50970-97
Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-52172-305
4x 100 kVA, working width 1400 mm, 8 welding points, equipped with input unit, output belt, 3 door control box, various accessories, from 1 cabinet Auction-ID: A1-50970-70
Welding Table / Perforated Table incl. accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, Plasma nitriding steel S355J2+N (St 52/3) Surface hardness 850 Vickers Grinded surfaces, Planed. Hole diameter: 28mm, Holes lowered 3mm. Grid 100 x 100mm Sidewalls 200mm Bore spacing in the sidewalls 50mm, Diagonal grid. Height adjustable from approx. 830 - 890mm Substructure reinforced with flat steel 140 x 15mm incl. bottom bearing diameter 110mm Table length 2000 mm Table width 1000 mm Table height 900 mm Table load 3000 kg Machine weight approx. 0.45 t Dimensions L x W x H 2.0 x 1.0 x 0.9 m Condition: new / unused Auction-ID: A7-52321-78
Special set 80 pieces, 28mm system Material: Burnished quality steel Scope of delivery see pictures Number of 80 Lots Weight 150 kg Condition new Hole diameter 28 mm Dimensions L x W x H 0.8 x 0.6 x 0.5 m Condition: new / unused Auction-ID: A7-52321-177
The inverter welding machine is used for MIG/MAG welding. The welding machine uses a high-power IGBT to transmit frequencies from 50/60 Hz to 20 kHz. The advantages of the welding machine include, among others, energy savings and the possibility of automatic correction of voltage pulsations, low sparking formation, high duty cycle Auction-ID: A7-52172-186
Welding turntable with - Footswitch - Tilting/swivelling by hand - Speed infinitely adjustable - Welding current transmission 250 amps Table diameter 450 mm Table load 300 kg Swivel range 90 degrees Speed 0.2 - 2 infinitely variable rpm Table load 300 kg vertical Total power requirement 220 kW Machine weight approx. 0.078 t Dimensions approx. 0.66 x 0.45 x 0.48 m Condition: new / unused Auction-ID: A7-52321-64
Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.4mm to 1000mm. - With drawer unit - Grid shelf - Heavy-duty castors steerable Worn welding accessories not included Table length 2400 mm Table width 1200 mm Table height 850 - 900 mm Machine weight approx. 0.65 t Dimensions L x W x H 2.4 x 1.2 x 0.95 m Condition: new / unused Auction-ID: A7-52321-131
Thickness 3 cm, With 6 adjustable feet. Auction-ID: A1-51945-20
10m Screw Clamps Projection 120mm Length 300 mm Condition new Hole diameter 28 mm Number of 10 Lots Weight 30 kg Condition new Hole diameter 28 mm Condition: new / unused Auction-ID: A7-52321-213
TIG welding machine, Delivery incl. - Grounding terminal 300 A with 1.5 meter welding cable - Electrode holder of Italian design 200 A with 2 meter welding cable - Carrying strap Welding current 10 - 200 A Connection voltage 230 V Weight 16 kg Dimensions LxWxH 600 x 300 x 400 mm Condition: new / unused Auction-ID: A7-52321-212
Blade thickness: 15cm. Equipped with: Perforated worktop, (11x) adjustable quick-release clamps, Mobile base with jockey wheel. Auction-ID: A1-51283-56
Special set 96 pieces consisting of: 1x Tool Trolley 30x quick-release bolts with twist lock short, without O-rings 8x Universal Stop 150 L - Nitrided 4x Universal Stop 225 L - Nitrided 8x Stop and clamping angle 175 L - cast iron 2x Stop and clamping angle 500 G left - Nitrided 1x Stop and clamping bracket 750 G left - Nitrided 1x Stop and clamping bracket 750 G right - Nitrided 1x Stop and clamping angle 500 G left - Nitrided 1x Stop and clamping angle 500 G right - Nitrided 4x Stop and clamping angle 300 G left - Nitrided 8x Prism Ø60-135° burnished - with collar Complete with shovel and countersunk head 16x Professional Screw Clamp - Nitrided 6x Professional Screw Clamp 45°/90° - Nitrided 4x Universal Stop 300 - Nitrided 1x accessory set consisting of: eccentric, Allen keys, brush, whetstone, Sample CleanBasic, Sample Non-stick and burner holder. Conditio ...
Welding turntable with - Footswitch - Tilting/swivelling by hand - Speed infinitely adjustable - 250 amp welding current transmission - Hole in face plate 40mm. Table diameter 350 mm Table load 100 kg Swivel range 90 degrees Speed 0.2 - 2 infinitely variable rpm Table load 50 kg. Vertical Machine weight approx. 0.055 t Space requirement approx. 0.46 x 0.4 x 0.42 m Condition: new / unused Auction-ID: A7-52321-101
Wall-mounted at a height of approximately 3 metres, steel frame and roof duct not included Auction-ID: A1-50970-99
maximum number of results exceeded
please refine your search
50 € 
