laser roller used for sale

material width:550 mm material thickness:0,4 - 1,6 mm no. of straightening rolls:11 straightening roll diameter:60 mm number of draw-in rolls:4 diameter of draw-in rolls:60 mm band speed:4 - 50 m/min power capacity:3,0 kW weight:1,7 t Dimensions (WxDxH):2,5 x 2,0 x 1,7 m

material width:120 mm material thickness:0,4 - 4,0 mm no. of straightening rolls:19 straightening roll diameter:24 mm material cross-cut:120 mm² :40 mm bending speed:5 - 25 m/min weight:0,85 t dimensions (WxDxH):1,2 x 1,7 x 1,6 infinitely variable drive:Stöber

Manufacturer: Transport Rollengang, Working length mm: 2500, Working widht mm: 800, Durchmesser Rolle mm: ca 80, Anschlaglineal link und rechts (ohne verstellung): yes, : ohne Antrieb,

Manufacturer: Bürkle Lackwalze 1416 mm 30 shore muss geschliffen werden, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: ca 30, Approx. thickness of rubber coating in mm: 25, Stahlkerndurchmesser ca. mm: 186,

Manufacturer: Hymmen, Type: TLX 2,0, Year: 1982, Control: hand, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1300, Working height: 950, regelbarer Direktantrieb für Auftragswalze: yes, Auftragswalzengeschwindigkeit m/min.: 10-25, Gummierte Auftragswalze mm: yes, Gummiqualität : 50, Direktantrieb Dosierwalze: yes, Verchromte Dosierwalze mm: yes, Metering roller drive m/min: ca.4-12, rbakel: yes, Compressed air bar: 6, FREE TEXT: ohne Schaltschrank, Year :1982

Manufacturer: Bürkle Lackersatzwalze 1416 mm 40 shore neu geschliffen, Spare roller: DAL SLC, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: ca.40, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 197,

Hersteller : Giardina, Spare roller: UV Walze, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Shore Härte: ca.30, Approx. thickness of rubber coating in mm: 30, Stahlkerndurchmesser ca. mm: 170, EPDM: Poore 2, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes, Rubber coating defective: Neu,

material width:250 mm material thickness:0,2 - 2,0 mm no. of straightening rolls:7 straightening roll diameter:60 mm run-in height:1250 mm power capacity:4,0 kW weight:0,65 t Dimensions (WxDxH):1,05 x 1,25 x 1,5 m

material width:450 mm material thickness:0,5 - 1,0 mm no. of straightening rolls:6 straightening roll diameter:53 mm number of draw-in rolls:2 diameter of draw-in rolls:96 mm power requirement:1,0 kW weight:0,65 t dimensions (WxDxH):1,0 x 1,0 x 1,55 m

material width:200 mm material thickness:0,5 - 3,0 mm no. of straightening rolls:6 straightening roll diameter:70 mm number of draw-in rolls:2 diameter of draw-in rolls:160 mm power requirement:3,1 kW weight:1,1 t dimensions (WxDxH):1,5 x 1,2 x 1,9 m

material width:310 mm no. of straightening rolls:5 straightening roll diameter:25 mm dimensions (WxDxH):0,4 x 0,6 x 1,15 m

Manufacturer: Bürkle Lackauftragswalze 1416 mm shore 30 Gelasert 80 Gang, Spare roller: DAL SLC, Bürkle: yes, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1415, Shore Härte: 30, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 210, Creasing on a 1 cm: yes, Wedge follower: yes,

Manufacturer: Bürkle Ersatzlackwalze 1416 mm 55 shore , Spare roller: Bürkle Dal SLC, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: 55, Approx. thickness of rubber coating in mm: 25,

Manufacturer: Bürkle Lackauftragswalze 1416 mm 45 shore glatt 20 mm muss geschliffen werden, Spare roller: SLC/DAL, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: ca.45, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 187, Can be reground: yes,

Manufacturer: Giardina Lackersatzwalze 1450 mm shore 25 30Gummi, Giradina: yes, Rubber coating length cm: 1450, Shore Härte: 25, Approx. thickness of rubber coating in mm: 30,

Manufacturer: Hymmen Lackuftragswalze 1400 mm Stahlkern 210 mm Aussendurchmesser 236, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Shore Härte: 40, Approx. thickness of rubber coating in mm: ca.30,

material width:210 mm no. of straightening rolls:6 straightening roll diameter:40 mm dimensions (WxDxH):0,45 x 0,6 x 1,1 m

material width:250 mm material thickness:0,5 - 4,0 mm no. of straightening rolls:9 straightening roll diameter:60 mm number of draw-in rolls:2 power requirement:3,8 kW Weight:0,8 t Dimensions (WxDxH):1,6 x 0,8 x 1,5 m

material width:600 mm material thickness: - 4,0 mm no. of straightening rolls:21 straightening roll diameter:30 mm material cross-cut:1800 mm² speed:6 - 36 m/min Power capacity:4,5 kW Weight:2,0 t Dimensions (WxDxH):1,5 x 2,0 x 1,9 m

Manufacturer: Bürkle Leimautragswalzen 1400 + 7 mm Bordscheiben, Spare roller: Leimauftragsmaschine, Bürkle: yes, Rubber coating length cm: 1400 + Bordscheiben, Approx. thickness of rubber coating in mm: ca.236 mm aussen,

Manufacturer: Bürkle Lackwalze 1416 mm 35 shore , Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: 35, Approx. thickness of rubber coating in mm: ca.25 ,

Manufacturer: Bürkle Lackauftragswalze 1416 mm 65 shore Neu gummiert, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: 65, Approx. thickness of rubber coating in mm: ca.10,

Manufacturer: Bürkle , Spare roller: SAL/DAL/SLC, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1410, Shore Härte: ca.40, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: ca.192,

Manufacturer: Bürkle Lackauftragswalze 1416 mm shore 40 gebraucht Ersatzlackwalze, Spare roller: SAL/DAL/SLC, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1414, Shore Härte: ca.40, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: ca.19192, Application roller rubber coating mm: 20,

Manufacturer: Bürkle Lackauftragswalze 1416 mm 40 shore gelasert Neu Neu Gummiert, Spare roller: SAL/DAL, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1414, Shore Härte: ca.40, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: ca.192, Creasing on a 1 cm: Laser Profil,

Manufacturer: Homag Transportrollgang mit angetriebenen Anschlagriemen, Year: ca.2005, Control: yes, Working length mm: 3500, Working widht mm: 2050, Engine power kW: 1,5, Feeding speed min-max m/min: 10-40, Durchmesser Rolle mm: 50, Rollenmittenabstand: 70, angetrieben über Zahnriemen: Flachriemen, Anschlaglineal verstellbar: Transportriemen, Anschlagkante Höhenverstellbar: yes, Schrägstellung der Rollen (Durchgehend): yes, Beschichtung: Gummi, Own controller: yes, Total hight mm: 980 +-, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, Year :ca.2005

Manufacturer: Purete, Type: PRT-C4106, Year: neu, Working length mm: 1.000, Working widht mm: 620, Engine power kW: 0,4, Total power kW: 0,4, Feeding speed min-max m/min: 5 - 25, Durchmesser Rolle mm: 65, Rollenmittenabstand: 200, Wellendurchmesser: 12, angetrieben über Kette: yes, Year :neu

Manufacturer: Purtete, Type: PRT-C4606, Year: neu, Working length mm: 6.000, Working widht mm: 620, Engine power kW: 0,75, Total power kW: 0,75, Feeding speed min-max m/min: 5 - 25, Durchmesser Rolle mm: 65, Rollenmittenabstand: 200, Wellendurchmesser: 12, angetrieben über Kette: yes, Year :neu

Manufacturer: Purete, Type: PRT-C4513, Year: neu, Working length mm: 5.000, Working widht mm: 1.320, Engine power kW: 0,4, Total power kW: 0,4, Feeding speed min-max m/min: 5 - 25, Durchmesser Rolle mm: 80, Rollenmittenabstand: 140, Wellendurchmesser: 80, angetrieben über Kette: yes, Year :neu

Manufacturer: Bürkle Lackersatzwalze 1416 45 shore, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: 45, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 194, Diameter of neck: 38,

Manufacturer: Purete, Type: PRT-C4613, Year: neu, Working length mm: 6.000, Working widht mm: 1.320, Engine power kW: 0,4, Total power kW: 0,4, Feeding speed min-max m/min: 5 - 25, Durchmesser Rolle mm: 80, Rollenmittenabstand: 140, Wellendurchmesser: 12, angetrieben über Kette: yes, Year :neu

Manufacturer: Sorbii, Type: Smart Coater M, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: ca 3 - 80, Operating side: rechts, Working height: 880, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: ca 5 - 25, Auftragswalzengeschwindigkeit m/min min-max: ca 5 - 25, Roller lift out: yes,

Manufacturer: Bürkle Lackauftragswalze 1416 mm 238 shore 35 muss geschliffen werden , Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: ca 50, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: ca 219, Creasing on a 1 cm: yes,

Manufacturer: Rollenbahn, Driven: yes, incl.control: ohne Steuerung, Length-width mm: 1110x1745, Working widht mm: 1500, Total hight mm: 880 -+ 50, Roller pitch mm: 90, roller diameter: 80, Drive power kW: 0,5, FREE TEXT: Ein Fuss muss nachgerüstet werden,

Manufacturer: Rollgang angetrieben für Lackstrasse, Working length mm: 950, Working widht mm: 1300, Total hight mm: +/- 980, Frequency converter: yes, Total hight mm: +/- 980, Engine power kW: ca.0,5, Feeding speed min-max m/min: 10-25, Working hight adjustable mm: yes, Manufacturer: Rollgang angetrieben für Lackstrasse, Working widht mm: 1300, Total hight mm: +/- 980, Roller pitch mm: 150, roller diameter: 45, Feeding speed min-max m/min: 10-25, Working widht mm: 1300,

Manufacturer: Purete, Year: 2020 neu, Working length mm: 3.000, Working widht mm: 1.320, Engine power kW: 0,75, Total power kW: 0,75, Feeding speed min-max m/min: 5 - 20, Stop straightedge: yes, Anschlaglineal verstellbar: yes, Zentrierrollengang: pneumatisch, Total hight mm: 900, Total hight mm: 900, Feeding speed continous adjustable: yes, Year :NEU

Manufacturer: Purete, Year: 2020 neu, Working length mm: 3.000, Working widht mm: 620, Engine power kW: 0,75, Total power kW: 0,75, Feeding speed min-max m/min: 5 - 20, Stop straightedge: yes, Anschlaglineal verstellbar: yes, Zentrierrollengang: pneumatisch, Total hight mm: 900, Total hight mm: 900, Feeding speed continous adjustable: yes, Year :2020 neu

Manufacturer: Purete, Type: PRT-C2306, Year: neu, Working length mm: 3.000, Working widht mm: 620, Engine power kW: 0,75, Total power kW: 1, Feeding speed min-max m/min: 5 - 25, Durchmesser Rolle mm: 65, Rollenmittenabstand: 187, Wellendurchmesser: 12, angetrieben über Kette: yes, Year :neu

Manufacturer: Purete, Type: PRT-C4313T, Year: neu, Working length mm: 3.000, Working widht mm: 1.320, Engine power kW: 0,75, Feeding speed min-max m/min: 5 - 25, Durchmesser Rolle mm: 65, Rollenmittenabstand: 200, Wellendurchmesser: 12, angetrieben über Rundriemen: yes, Year :neu

Manufacturer: Hymmen, Type: TLX M, Year: 1992, Work piece width min-max mm: 1300, Working widht max mm: 1300, Operating side: links, Working height: ca 980, UV-laquer roller: yes, Verchromte Dosierwalze mm: yes, Glättwalzengeschwindigkeit ca. m/min.: 80, Steuerung Nicht-Ex : 5 - 25, Widht of roller coater: yes, Application roller drive m/min: yes, Widht of metering roller: Band, Year :1992

Manufacturer: Bürkle Ersatzlackwalze 1416 50 shore mm 80 Gang gerillt Neu, Spare roller: SAL/SLC/DAL, Bürkle: yes, Roller rubber coating: 238, Rubber coating length cm: 1416, Shore Härte: 40, Approx. thickness of rubber coating in mm: 26, Stahlkerndurchmesser ca. mm: 187, Creasing on a 1 cm: Walze ist gelasert, Wedge follower: yes,

Length mm: 1000 - 4000, Working widht mm: ca. 1130, Total hight mm: ca. 250 ,

Manufacturer: Purete, Type: PRT-R1106, Year: neu, Work piece width min-max mm: 620, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Working widht max mm: 620, Operating side: rechts, UV-laquer roller: yes, Auftragswalzengeschwindigkeit m/min.: 0 - 20, Verchromte Dosierwalze mm: yes, Feeding speed min/max: 0 - 20, Year :neu

Manufacturer: Purete, Type: PRT-F1113, Year: neu, Operating side: rechts, Auftragswalzengeschwindigkeit m/min.: 0 - 20, Gummierte Auftragswalze mm: 1.450, Verchromte Dosierwalze mm: yes, Dosierwalzenbreite mm: 1.450, Glättewalzenbreite mm: 1.450, Work piece width min-max mm: 1.320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Working widht max mm: 1.320, Feeding speed min/max: 0 - 20, Wight approx. kg: 1.700, Required space L x W x H mm: 1.600 x 2.575 x 1.700, Year :neu

Manufacturer: Purete, Type: PRT-R2113b, Year: Neu, Work piece width min-max mm: 1.320 , Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Working widht max mm: 1.320, Operating side: rechts, Auftragswalzengeschwindigkeit m/min.: 2 - 80, Gummierte Auftragswalze mm: 1.450, Verchromte Dosierwalze mm: yes, Widht of roller coater: 1.450, Required space L x W x H mm: 1.600 x 2.575 x 1.700 mm, Year :Neu

Manufacturer: Bürkle Ersatzwalze 1415 mm 50 shore 25 gummi muss geschliffen werden, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1415, Shore Härte: 50, Approx. thickness of rubber coating in mm: muss geshliffen werden, Stahlkerndurchmesser ca. mm: ca 196,

Manufacturer: Giardina, Type: Rollbahn, Year: ca.2005, Driven: yes, driven: yes, Length-width mm: ca.980, Total hight mm: 890 +/-, Adjustable: yes, Roller pitch mm: ca.220, Conveyor speed m/min: 10-25, Year :ca.2005

Spare roller: Umlenkrolle für SLC 1300, Bürkle: yes, Roller rubber coating: no, Stahlkerndurchmesser ca. mm: ca 85, Total lenght mm: 1660 + 140 + 40,

Manufacturer: Bürkle Lackauftragswalze shore 55 Länge 1416 mm muss geschliffen werden, Spare roller: SCL 1300, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: ca 55, Approx. thickness of rubber coating in mm: 10, Stahlkerndurchmesser ca. mm: ca 216,

Manufacturer: Bürkle Lackersatzwalze 1416 mm 50 shore defekt, Spare roller: SLC/DAL, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1415, Shore Härte: gummi mus erneuert werden,