laser head used for sale

- Producer Costa - Type BF 25-1350 - Working width 1350 mm - Year of construction 2002 - Number of brush heads 2 Stk. - 1. Unit - Spindle with brush head, D 350 mm - Producer brush head Flex Trim - grain size 220 - Bürstenkopf tiltable 0 - 30 Grad - 2. Unit - Spindle with brush head, D 350 mm - Producer brush head Flex Trim - grain size 220 - Brush heades tiltable 0 - 30 Grad - Unit height adjustable - Vacuum transport belt - Operating side, left - Location - Druckluftbedarf, Enstaubung 4 bar bei 340 L/min - Diameter Connecting piece 4 x160mm mm - Absaugleistung 3.600+2.500, Gesamt: 6.100 m³/h - Airspeed, exhaust system 24 m/s - Switch cabinet built into the machine - Total connection 35 A / 15 kW - Voltage / HZ 400 / 50 - Spannungsschwankungen max. +/- 5 %

Year: 2018 technically efficient, ready to work – after full service motor power: 2.2 kW disc diameter: 400 mm (cross-cut) machine head can be moved 45° to the right and left head tilt 45° to the left pneumatic profile clamps pressure reducer cooling system

Solo Crown corker Arol with 8 capping heads capacity: approx. 18.000 bph incl. cap feeder year of manufacturing: 2019 delivery time: Oktober /November 2026 The machine can be inspected any time.

Piston head for Frech die-casting machine, bronze, 931603, Frech/Müller Weingarten, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Piston head for Frech/Müller Weingarten die casting machine, Outer diameter 251.5 mm, thread inner diameter 196.5 mm, height 200 mm, 34 kg

Häwa milling head debarking system is made of: Trunk diameter 0.30 to 1.30, Trunk length 22.0 - 6.50 m Drive motor 55 kW Log feeding station Log wagons Milling head Round timber sorting system li/right after milling Residual wood scraper with discharge Electrical control cabinet, control panel

Used dough divider / head machine KÖNIG, type: Mini Rex 4000 - AB -in bakery condition- - Tested and cleaned - Strap in very good condition - Condition: Good, ready to use - Video on request - Number of rows: 2 rows - Output: max. 4,000 pcs./h - Weight range: 25 - 130 g - El. Connection: 1.3 kW, 3x 400 V+N, 6 A, 50 Hz Visits and test runs are possible by arrangement.

centre height: 130 mm spindle bore: 18 mm ratio: 40:1 swivellable: - 10° bis 90° ° groove width: 16 / 18 mm weight: 35 kg dimensions of the machine ca.: 0,5 x 0,25 x 0,25 m Condition: unused: Unused semi-universal dividing set: - Spindle in precision tapered roller bearings - Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground - Translation disengageable for direct sharing - each division 2 to 50 and many divisions to 380 accessories: Tailstock, 2 part washers, centering point, driver and chuck flange Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: 2007 - technically efficient, ready to work – after full service - disc diameter: 420 mm - cooling installation - double-sided pneumatic clamp - angle-adjustable crank - pressure reducer

2x Hohner stitching heads for omega loop. In excellent condition. For Duplo and Horizon booklet makers, etc.

A horizontal dual-head corner cleaning machine Stürtz for the simultaneous machining of two 90° internal and external corners on welded plastic windows is available. Tool stations top/bottom: 8/8, min. product dimensions X/Y without mullion machining: 320mm/370mm, min. product dimensions X/Y with mullion machining: 640mm/370mm, min. frame internal dimension X/Y: 180mm/180mm, max. frame dimensions X/Y: 4000mm/3000mm, installation depth range: 30mm-135mm, profile visible width range: 25mm-120mm, equipment: 4 gasket groove drilling units/4 internal corner measuring devices/4 shadow groove cutters/2 external contour units. Including various accessories and tools. Documentation available. An inspection on site is possible.

Offer 20147 Technical data: - Load capacity 1000 kg - Tilt angle up to max. 90 ° - Foot pump - Fork length 820 mm - Fork width 550 mm - Space requirement approx. L 1230 x W 740 x H 650 mm - Weight approx. 220 kg

Offer 20148 Technical data: - Load capacity 1000 kg - Tilt angle up to max. 90 ° - Foot pump - Fork length 820 mm - Fork width 550 mm - Space requirement approx. L 1230 x W 740 x H 650 mm - Weight approx. 220 kg

n° 4 indoor/outdoor LED headlights \"in their original state\", never used Overall dimensions: 1200 x 800 x 400 mm Weight: 10 kg Auction-ID: A7-44803-321

Technical features: heated knives, weld bead limitation 0.2mm, optimization of the welding result through the parallel sliding welding process, individual adjustment of the welding parameters, quick changing of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/Takt, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, supply voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg. An inspection on site is possible.

n° 4 indoor/outdoor LED headlights \"in their original state\", never used Overall dimensions: 1200 x 800 x 400 mm Weight: 10 kg Auction-ID: A7-44803-323

n° 4 indoor/outdoor LED headlights \"in their original state\", never used Overall dimensions: 1200 x 800 x 400 mm Weight: 10 kg Auction-ID: A7-44803-322

diameter range 6 mm shaft length under head 40 mm max. cut-off length 60 mm output pieces/min 600

diameter range 5 mm shaft length under head 70 mm max. cut-off length 88 mm output pieces/min 500

diameter range 5-8 mm shaft length under head 60 mm max. cut-off length 90 mm output pieces/min 200

diameter range 2-5,5 mm shaft length under head 45 mm max. outside dia. Alu 6 mm output pieces/min 450 cutting length 64 mm

diameter range 3-6,35 mm shaft length under head 65 mm cutting length 87 mm output pieces/min 360

semi tubular rivets diameter range 5 mm shaft length under head 40 mm max. cut-off length 60 mm output pieces/min 470

diameter range 0,8-3,0 mm cutting length 30 mm shaft length under head 25 mm output - pieces/min 600

diameter range 2-6,35 mm shaft length under head 70(65) mm cutting length 87 mm output pieces/min 360(320)

diameter range 4-8 mm shaft length under head 165 mm cutting length 200 mm output pieces/min 100

diameter range 6 mm shaft length under head 145 mm cutting length 165 mm output - pieces/min 100

diameter range 2-7 mm shaft length under head 120 mm cutting length 140 mm output - pieces/min 300

diameter range 6,35 mm shaft length under head 70 mm cutting length 95 mm output pieces/min 300

diameter range 2-4,76 mm shaft length under head 46 mm max. cut-off length 60 mm output pieces/min 470

diameter range 2-5 mm shaft length under head 25 mm max. cutting length 37 mm output- piece/min 330

diameter range 4-8mm shaft length under head 40mm max. cut-off length 71mm output pieces/min 250 press power 30 t

diameter range 3-6,5mm shaft length under head 8-75 mm max. cut-off length 100 mm output pieces/min 150

bushing cut-off diameter range 6 mm cutting length 95 mm shaft length under head 75 mm output - pieces/min 200

bushing cut-off diameter range 1-4mm shaft length under head 25 mm max. cutting length 32 mm output- piece/min 350

Masterfill Filling Machine S 500, The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products., Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards., The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill ...

diameter range 5,0-10 mm shaft length under head 120 mm max. cutting length 170 mm output- piece/min 130

diameter range 6 mm shaft length under head 50 mm max. cut-off length 75 mm output - pieces/min 300

diameter range 5-10 mm shaft length under head 10-150 mm max. cut-off length 180 mm output pieces/min 100

diameter range 6-12 mm shaft length under head 120 mm max. cut-off length 160 mm output pieces/min 125

diameter range 3-6 mm shaft length under head 6-60 mm max. cutting length 75 mm output- piece/min 180

bushing cut-off diameter range 1-4mm shaft length under head 25 mm max. cutting length 32 mm output- piece/min 350

diameter range 4-8 mm shaft length under head 8-80 mm max. cut-off length 110 mm output pieces/min 140

diameter range 3-6 mm shaft length under head 35-120 mm max. cutting length 146 mm output- piece/min 90

diameter range 4-9 mm shaft length under head 100 mm cutting length 120 mm output pieces/min 100

diameter range 2-4 mm shaft length under head 100 mm max. cutting length 117 mm output- piece/min 110

bushing cut-off diameter range 5 mm cutting length 50 mm shaft length under head 40 mm output - pieces/min 450

diameter range 8-16 mm shaft length under head 25-180 mm max. cut-off length 220 mm output - pieces/min 70

diameter range 2-5,2 mm shaft length under head 120 mm cutting length 146 mm output pieces/min 105

good condition diameter range 10-20 mm shaft length under head 180 mm cutting length 230 mm output - pieces/min 45/50/56/63 press power 160 t plane of stroke 240 mm

bushing cut-off diameter range 6,5 mm number of dies 8 number of stations (incl. cut off) 9 cutting length 6-10 mm plane of stroke 123 mm output - pieces/min 150