128,994 used machines on RESALE, but how to find them? Machine Search
centre height: 250 mm total power requirement: 0 kW weight of the machine ca.: 0,250 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
throat: 600 mm tool adaptor: 50,60 SK power requirement: . kW flange:: 500x500 mm Width of nail head: 270x220 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A total of five Datz aluminum MCA capping heads are available for the VSO and VA series, but can also be used universally. One of the heads needs to be readjusted, the rest are ready for use. On-site inspection is possible.
The multihead weigher was briefly used for mozzarella, includes basic module, power supply, distributor drive, dosing chute, storage container, weighing container, chute set, hopper, operating unit, holder, accessory set, feed hopper, collecting container and other elements. On-site inspection is possible, the machine is already dismantled and ready for loading, with documentation. The machine has been used very little.
turning diameter: 400 mm slide adjustment: 62 mm tool adaptor: MK 4 tool taper: Ø 18 mm weight: 8,0 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stock number: D527, Spray dryer nozzle head, stainless steel., Pasch Silkeborg TCR P2052 - 1984., Material: Stainless steel AISI 304
Stock number: D526, Spray dryer nozzle head, stainless steel., Pasch Silkeborg TCR P2052 - 1972., Material: Stainless steel AISI 304
Stock number: PJ234, Impeller pump head, stainless steel,, 1½, Jabsco model 28400 - 7015., Material: Stainless steel AISI 304
Stock number: PT4005, Lobe pump, stainless acid proof steel,, SSP model S6-0353-H7., Mounted with rubber lobes,, by-pass function., Excluding motor and foundation., Material: Stainless acid proof steel AISI 316
Stock number: PT3015, Lobe pump head, stainless steel,, SSP 300 ND., Ø 3,, displacement 0,93 l/rpm., Material: Stainless steel AISI 304
Stock number: PT2051, Lobe pump head, stainless acid proof steel,, Alfa Laval type LKP-L 4055., Max 10 bar,, horizontal passage., Ø 2 connections,, flushed shaft seals., Displacement 0,554 l/rotation., Material: Stainless acid proof steel AISI 316
Stock number: PT2037, Lobe pump head, stainless steel,, INOXPA type SLR2-50/06-2., Horizontal flow., Displacement 0,3008 l/rev., Material: Stainless steel AISI 304
Stock number: PT2039, Lobe pump head, stainless acid proof steel., Ibex type 1120 HA., Horizontal flow., Ø 2 connections., Displacement 0,3 l/rev., Material: Stainless acid proof steel AISI 316
Stock number: PT2030, Lobe pump head, stainless steel,, Willi F. Grassel type 200 NDA,, double jacket Pump house., Horizontal flow., Material: Stainless steel AISI 304
Stock number: PT2033, Lobe pump head, stainless acid proof steel,, SSP type S3-0038-V07., Vertical passage., Ø 2 connections., Displacement 0,384 l/rev., Material: Stainless acid proof steel AISI 316
Stock number: PT2028, Lobe pump head, stainless acid proof steel,, bex Type NMOG 1120 A., Horizontal flow., Displacement 0,3 l/rev., Material: Stainless acid proof steel AISI 316
Stock number: PT1526, Lobe pump head, stainless steel,, Waukesha Type IMC 440., Overpressure valve., Horizontal flow., Ø 1½ connections., Capacity 0,18 l/rev., Material: Stainless steel AISI 304
Stock number: PT1551, Lobe pump head, stainless steel,, APV type CL/1/021/10,, with recirculation, 0,21 l/rev., Material: Stainless steel AISI 304
Stock number: PC9145, Side channel pump head, stainless steel,, SIHI type Akla 1201., Excl. motor., Material: Stainless steel AISI 304
4-Spindle Paper Drilling Machine Ideal 504
4 Kopf Bohrmaschine / 4 head Paper Drilling machine Josef Foellmer IRAM 400/445Serial-No. 2190
Papierbohrmaschine / Paper Drilling machine
Heftköpfe für Sammelhefter - Stitching heads for Saddle Stitcher Polygraph Heftköpfe 731 - 745 - 750 Serial-No. 731-745-750
max. format 49 x 65 cm Year of construction 2000 Flat pile feeder with suction head 4 fold pockets in the parallel fold section 1 folding blade in the cross-fold section 1 more fold pocket after the 1st cross break Shed display Price on request. We supply and install worldwide.
Clamping force 1800 kN. Extruder S 120/28D. Accuhead 25 ltr with 100-point programming. Die dia min/max 150/450 mm
Slot head for milling machine, milling head, CCCP / USSR STANKO Type 1502Nr: 200 Year of construction 1974Stroke size: max. 60 mmStroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plateHole spacing machine-flange plate: 245 x 185 mmMounting hole: 17 mmCentering diameter on the machine flange plate: 190 mm- Stroke size adjustable via eccentric adjustment- The drive is as with the normal vertical head from the machine gearbox- Drive via driver, centric in the centering diameter- Degree scaling at the
Universal face and boring head LENZ type LPA 1SSpindle tool, spindle head similar to WOHLHAUPTER UPA3Tool holder: SK 40 - M16Adjustment accuracy: 0.01 mm- Accessories as shown- Storage boxWeight: approx. 5 kggood condition; used
Four-way head spindle, galvanized Four-way head spindle for height-adjustable and tilt-proof connection of shoring and superstructure with one or two H20 formwork girders. 10.4 kg EUR 38,70 per piece 4-way screw-jack head 4 way screw-jack head for height-adjustable, anti-tip connection between load-bearing tower and superstructure with one or two H20 beams. 10.4 kg EUR 38,70 per piece
Doka head spindle Head spindle for height-adjustable connection of shoring and superstructure. 9.20 kg EUR 37,50 Doka Screw jack U-head Screw jack U-head for height-adjustable connection between load-bearing tower and superstructure. 9.20 kg EUR 37,50
Fully reconditioned cylinder heads for MWM engine type TCG2032, part number 0518 3232 Available on stock: 16 psc. partstscentras.lt
Multihead weigher 14 head incl. flow-wrapper and feeder Condition: very good (used) Year of manufacture: 2023 Functionality: fully functional Description: Multihead weigher with 14 heads incl. flow-wrapping machine, feeding into the multihead weigher and removal belt for the finished goods. Built in 2023 and very little run. The system was bought 2 times at the time because the demand for products had increased at short notice. After a short time, however, it sank again, so that the machine is still almost completely NEW. All in stainless steel (304 SS) Weight range: 10 - 2000 g Speed: 120 bags/minute Accuracy: +-0.1g 220V 50/60Hz 1000 W 14 Heads, 1.6 L Volume, 7 Inch HMI, MCU Control Flow wrapping machine with SIEMENS PLC control, maximum film width 420 mm, bag size: B 60-200 mm, L60-300mm, SIEMENS servo motor, 3 line date printer, bagformer 120 mm ...
used
RECON Part Number: 1231 3333 Diesel All parts new ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Perkin Elmer Headspace Sampler HS 40XL, Headspace sampler for 40 vials
Used head machine KÖNIG, type: Mini Rex Futura AB -in good bakery condition- - Head machine / dough divider: KÖNIG Mini Rex Futura AB - Knitting roller: SKG54 and RKG58 for round and square dough pieces - 2 rows - Weight range: 25 - 75 g for round - Weight range: 40 - 85 g for square ones - Capacity: max. 2,000 pcs./h - Band very good condition - Condition: Very good, ready to use Suitable for wheat and rye doughs (up to 40% rye content). Visits and test runs are possible by arrangement.
A small geared drilling machine Knuth is available. Drilling capacity steel: 25mm, thread cutting steel: M10-M12, spindle taper: MT3, speed: 2900rpm, quill stroke: 400mm, arm reach: 250mm, table dimensions X/Y: 270mm/300mm. Machine dimensions X/Y/Z: approx. 600mm/600mm/1200mm, weight: approx. 200kg. An on-site inspection is possible.
From a current exploitation we offer you an xyz. Year of construction: 2024 Condition: young used Original price: 622.500,00 EUR Equipment / accessories / other information: NIR Plus Package QUANTIMETER Yield Measurement Activation NIR Ingredient Determination Corn Cutting length adjustment, automatic Near-infrared sensor (NIR) for PREMIUM LINE Wizard Package Variable attachment drive incl. preparation DIRECT DISC Discharge manifold lighting LED, synchr. schwenkb. w. manifold flap Steering angle sensor Dynamic steering CEMOS AUTO PERFORMANCE Camera system, prepared AUTO FILL trolley filling system with CEBIS display GPS PILOT Ready Digital Package II - CEMIS Machine connect license SAT 900 GNSS receiver SAT 900 GNSS Receiver - SATCOR 15 Networked Documentation License 50 Years of JAGUAR Gutfluss XL PREMIUM LINE professional Counter Blade Universal PREMIUM LINE ...
Punching width: 500mm, rated current: 20A, control voltage: 220V, weight: 2.5t. No defects known, regularly maintained, operating hours unknown. With punching tools and punching blade, only little documentation available. An on-site inspection is possible.
Extruder S 100/24D. Battery head 12 ltr. Nozzle diameter min/max 160 / 330 mm. Clamping force 62 tons. Max. mold size: length 1,300 mm, width 900 mm. Depth 2 x 250 mm. Opening min / max 500 / 1,400 mm
Extruder S 90/24D. Battery head 5 ltr. PLC-Control Blow-CVomand
Max. saw blade diameter: 400 mm Pneumatic material tensioners
Three milling heads for different machines of the brand Pfauter-Gleason are available. 1) Milling head for Gleason Genesis 130H. 2) Milling head for Pfauter P200, without counter bearing. 3) Milling head for Pfauter PE250. An on-site inspection is possible.
Dough dividing machine KÖNIG, type: Artisan SFC Compact machine for the production of square pastries with a high product variety thanks to interchangeable cutting rollers and punching tools. - Incl. 3 cutting rollers for longitudinal cutting - Incl. 2 cutting tools for the cross-section - Doughs up to a TA of 180 possible - Extremely gentle dough processing - Belt speed adjustment - Machine in stainless steel - Condition: Very good, ready to use - Everything technically checked and machine cleaned Capacity: up to 300 kg/h, at TA 180 Dough belt width: up to 170 mm Speed: max. 1.5m/min. EL. Connection: 3x 380-415 V, 50 Hz, 0.6 kW, 4.0 A Other punching tools are optionally available from KÖNIG: -Square -Heart - Crisp fresh -Quitting time -Rhombus The machine is in very good condition and is ready for immediate use. Visits and test runs are possible by arrang ...
Accumulation Head Capacity : 4 l // Number Of Heads: 1
Accumulation Head Capacity : 1,8 l // Number Of Heads: 1
Overhauled battery head 12 ltr in very good condition
RECON MWM TBD 441 Part number: 1217 0190 / 6.440.0.180.021.7 -incl. starting valve Cast: 6.440.0.180.021.0 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
maximum number of results exceeded
please refine your search
