We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,595 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
turning diameter: 400 mm slide adjustment: 62 mm tool adaptor: MK 4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
diameter: 260 mm tool adaptor: 40 SK : S 20 x 2 für DECKEL Slide cross: 48 mm Weight: 5 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
throat: 600 mm tool adaptor: 50,60 SK power requirement: kW flange:: 500x500 mm Width of nail head: 270x220 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
throat: 600 mm tool adaptor: 60,60 SK power requirement: kW flange:: 500x500 mm Width of nail head: 320x300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Rotary table, rotary indexing table, dividing head, dividing head -Four-jaw chuck: Ø 165 mm -Height: 185 mm -Dimensions: 240/320/H185 mm -Weight: 24 kg
used
throat: 760 mm flange:: 500x500 mm Width of nail head: 230x170 mm tool adaptor: nach DIN power requirement: kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
tool adaptor: ISO 40 Torque: 200 Nm turning speed range: 1800 U/min drive motor: 3,7 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning speed range: 3000 U/min drive motor: 22 kW tool adaptor: ISO 50 Torque: 1000 Nm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning speed range: 1800 U/min drive motor: 5,5 kW tool adaptor: ISO 40 Torque: 290 Nm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning speed range: 1800 U/min drive motor: max. 44 kW tool adaptor: ISO 50 distance spindle - column: 460 mm Torque: 3180 Nm Technical specifications Automatic clamping of the tool, driven by a hydro-mechanical system at 80 bar. Spindles and gears are made of case-hardened and tempered chrome-nickel. Spiral bevel gears, Klingelnberg system with ground tooth flank. High-precision bearings. Standard DIN-2080 / 69871 taper tool – Drawbar DIN-69872. Consult for others. Wide range of performances and applications. Blowing of taper for cleaning. Cooling of bearings of the spindle (4000 rpm) External cooling of tool or internal AD-type cooling, with rotary joint. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning speed range: 1800 U/min tool adaptor: ISO 40 - 50 spindle taper: DIN 2080 / M16 drive motor: 7,5 PS quill stroke: 65 - 75 mm quill stroke: 65 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning speed range: 3000 U/min drive motor: 30 kW tool adaptor: ISO 50 Torque: 1500 Nm Quick tool unclamping device (hidromechanic), on both spindles Tool taper DIN 69871 - Pull stud DIN 69872 B, on both spindles General dimensions as per the attached drawing VXZ-3900-36-DG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning speed range: 3000 U/min drive motor: max. 25,7 kW tool adaptor: ISO 50 distance spindle - column: 417 mm Torque: 1370 Nm Technical specifications Automatic clamping of the tool, driven by a hydro-mechanical system at 80 bar. Spindles and gears are made of case-hardened and tempered chrome-nickel. Spiral bevel gears, Klingelnberg system with ground tooth flank. High-precision bearings. Standard DIN-2080 / 69871 taper tool – Drawbar DIN-69872. Consult for others. Wide range of performances and applications. Blowing of taper for cleaning. Cooling of bearings of the spindle (4000 rpm) External cooling of tool or internal AD-type cooling, with rotary joint. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
tool adaptor: ISO 40 - 50 turning speed range: 1800 - 4000 U/min drive motor: 5 - 30 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Very nice old Toledo scale, calibratable, up to 120 kg
used
Riggs twin head depositor Model: 1000 Serial: TT1310 2011, twin head depositor, previously used for filling food grade oils 10l - 25l, with cycle counter
used
faceplate diameter: 1800 mm turning diameter over slide rest: 2500 mm turning length: mm Control: FAGOR 8050 T total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1010063 Type of machine CNC Facelathe Make TADU Type FS 1250 Build in nb Type of control FAGOR, 8050T Turnung diameter over bed 2500 mm Additional information 4-jaws chuck 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Cylinder head overhauled 146673-11050 Assy 746674-11121
used
Closing heads ALCOA for plastic screw caps pick-and-place PCO 28 mm tested and ready to work
used
Closing heads Krones for aluminium screw caps suitable for several types of closing machines like Alcoa, Adelski, Arol, etc. tested and ready to work
used
Wartsila Nohab WN 25 cylinder head complete with rocker arms and valves Std sized seat bores Free of cracks and weldings Used but in good condition In our stock in Istanbul Please contact : info@fin-marine
used
Bergen L 32:40 P cylinder head covers complete. 6 pieces available also available all other major parts like: connecting rods, pistons, crank shaft, turbo charger, camshaft piece , fuel pumps etc. In our stock in Istanbul Turkey Please contact us at: info@fin-marine
used
WICHMANN AXAG - AXA Cylinder head covers 18 pieces available In good condition Free of any cracks and free of welding Suitable for AXA and AXAG type engines In our stock in Istanbul Turkey Please contact us at : info@fin-marine
used
Recon Part Number: 1231 3228 Diesel Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
used
Wartsila 46 cylinder heads reconditioned by Wartsila Free of any cracks or welding Water pressure and crack tested In our stock in Istanbul Turkey Please contact: info@fin-marine
new
Sulzer RT FLEX 58T-B Cylinder heads complete 5 pieces available New, never used Other major parts also available In our stock in Istanbul please contact: info@fin-marine
used
Leitz Universal knife head 148x50x30 G&-4916
accuhead machine, 300 kN clamping force. Extruder 80/24D. Accuhead 5 ltr. Die dia from 20 to 200 mm. mould dimensions: 800 x 700 x 2x250 mm (LxWxD) Spreading device, needle blow, waste punch, interval blowing, core pulls. Machine can be viewed under power until the end of January 2022
used
We have 8 pieces of L32 cylinder heads in our stock in Istanbul Nearly brand new condition with very low working hours crack tested and water pressure tested free of cracks or welding We also have pistons , liners , con rods, fuel pumps and more ... please contact us at: info@fin-marine for more information
used
SEMIAUTOMATIC FILLING LINE 6 HEADS The machine is locatd in Italy.
RECON Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
used
RECON ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
used
- Please note! Price per piece! - Suitable for TCG 2020 V12 - 12304116 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and processes into ...
new
turning speed range: 1800 U/min drive motor: 14,7 kW tool adaptor: ISO 50 Torque: 780 Nm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Cylinder head 413 7 x with three-hole bore Condition from new to used 2 x with two-hole bore Condition new and used
used
Manufacturer: SHW Type: 5373-01 Speed max.: 1800 1/min Md max.: 600 Nm Angle: 90° Ratio: 1:1 Tool holder: SK 50
used
Manufacturer: SHW Type: 5373-01 Speed max.: 1800 1/min Md max.: 600 Nm Angle: 60° Ratio: 1:1 Tool holder: SK 50
used
Manufacturer: Griesinger Type: IKF Milling Head Type 2 Car
used
Manufacturer: Alberti Type: T90-3.5
used
used
Single head welding machine - ELUMATEC crushed arms and wrinkled one piece of cover Year: 2003
used
Two Head Linear Labeler Year of manufacture: 2018 label height: 150mm
used
Single head labeling machine for labels max h70mm, with a max production of 6000b/h. DOCUMENTATION AVAILABLE
used
Labeling head, for label width max. 150mm Maximum production: 30mt/sec Connection: 220V single phase. DOCUMENTATION AVAILABLE
used
SUTEAU ANVER XPM 18X13 300T receding head die cutting press was built in France in 2008. The machine aimed at mass production, is used in the process of precise cutting in foam and non-metallic materials, such as plastics, textiles and rubber. Built-in hydraulic systems combined with a stable design and reliable components ensure high precision and speed of cutting, regardless of machined material. The material taken from rolls or sheets is pressed against the machine head by the vertical movement of the working table, under which hydraulic cylinders are located. The cylinders exert a balanced pressure to achieve the ideal position of the table in relation to the head. The material is then machined using dies that can be mounted either to the head surface or on a lifted table. To facilitate the operator’s die positioning and the insertion and removal of the cut material, the SUTE ...
new
From linear to combination scales Application: Dosing free-flowing general cargo in accurate quantities. Characteristics of the scale • High accuracy • All parts in contact with the product are made of smooth 304 stainless steel • Simple operation, easy to clean and can be dismantled without tools • Control Panel: 7" Touch Screen • Low maintenance • Synchronization with all packaging machines possible Specifications • Number of weighing heads: 10 • Weighing container: 2,5l • Weighing range: 10 - 1000g • Accuracy: ± 1.0g - 1.5g • Speed: up to 60 sachets/min (depending on product) • Control panel: 7" touch screen display • Opening of the container flaps by means of stepper motors • Power: 230V / 1.3KW / 50(60)Hz / 10A • Dimensions (LxWxH): 1700mm x 1100mm x 1265mm • Machine weight: 380kg
used
Working width 1300 mm Working height 880 - 940 mm Workpiece thickness 3 - 80 mm Feed speed: 4 - 20 m/min Roller coater to apply either sealers or top coats Self-balancing floating head with automatic adjustment along and accross Independant adjustable speeds by means of inverters for conveying, application and doctor roller with digital display
new
TO WHOM IT MAY CONCERN; WE VE NEW UNUSED GENUINE COMPLETE CYLINDER HEADS OF BERGEN B 32:40 A AT OUR STOCK PART NO IS 433549 WE VE 2 PCS AT OUR STOCK. EX STOCK IZMIR TURKEY ADDITIONALLY WE VE MANY MANY OTHER MAJOR PARTS OF THIS TYPE ENGINE BERGEN B 32:40 A AT OUR STOCK PLS REFER LIST ON ATACHE IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY
used
MAN B&W 58/64 CYLINDER HEADS , OVERHAULED READY TO INSTALL PISTONS, FUEL PUMPS, CONNECTING RODS, CYLINDER LINERS AVAILABLE. TC ( NA48 SM1013)
used
weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 500 x 210 x 270 mm