laser head trumpf used for sale

Drill head with cross edge, cross crown, drill bit BWS Ø 102.5 mm length: 195 mm mount: spline shaft, 6 wedges, 10 mm wide spline shaft diameter: 34 / 46 mm New ! Dimensions: 200 x 110 x 110 mm

Suction lifter, 2-head suction lifter, rocker arm suction lifter, 2 pieces VERIBOR Ø 120 mm in plastic case used, tested ! Dimensions(single suction lifter): 330 x 120 x 70 mm Dimensions(case): 360 x 280 x 140 mm

Suction lifter, 3-head suction lifter, rocker arm suction lifter, 2 pieces BOHLE VERIBOR BO s3.0BL load capacity: 100 kg head diameter: Ø 120 mm 3 suction heads in plastic case New ! Dimensions(single suction lifter): 345 x 235 x 85 mm Dimensions(case): 450 x 370 x 125 mm

Suction lifter, 2-head suction lifter, rocker arm suction lifter, 2 pieces BOHLE VERIBOR BO s2.4BL Load capacity: 60 kg Head diameter: Ø 120 mm 2 suction heads in plastic case New ! Dimensions(single suction lifter): 345 x 120 x 85 mm Dimensions(case): 340 x 275 x 125 mm

Drill head, boring head, spindle head WIDIA Ø 6 - 20 mm Order No.: 341 / 89184840 Fbk: 110 / 276 / 1 mount: SK40 Tool diameter: Ø 12 mm New ! Dimensions ( drill head ): 197 x 63 x 63 mm Dimensions ( packaging ): 220 x 100 x 100 mm

Dividing head, dividing head, dividing table, with tailstock WMW Type TU 100 ( TU100 ) Center height: 105 mm Dividing head: Mount: MK4 ( inside ) / cone Ø 51 / 54 mm x 10 mm ( outside ) Flange diameter: Ø 108 mm, bolt circle diameter: 75 mm 3x threaded hole: M10 x 1.5, Depth: 20 mm -15° - +105° tiltable spindle bore: Ø 24 mm Base: 105 x 195 mm tailstock with quill and fixed grain tip Tool holder: MK2 quill stroke: 35 mm quill: +/- 5° tiltable foot: 70 x 142 mm used, checked! Dimensions ( dividing head ): 480 x 450 x 260 mm Dimensions (tailstock) ): 220 x 70 x 115 mm

Unscrewing head, fine turning tool WOHLHAUPTER MVS32-18 310003 Cutting edge diameter: 43 - 54 mm Holder shaft: Ø 18 mm, length: 22.5 mm Function length: 52 mm Total length: 88 mm New ! Dimensions ( unscrewing head ): 88 x 36 x 32 mm Dimensions ( transport box ): 95 x 37 x 37 mm

Fine boring head, boring head, fine turning tool WALTER B2110M B2110M.0.25.73.029.01 Cutting edge diameter: 22 - 29 mm Total length: 80 mm New ! Dimensions ( fine boring head ): 80 x 25 x 25 mm Dimensions ( transport box ): 88 x 35 x 35 mm

Tool head, clamp holder, tool holder, tool carrier 62.43003.00362 Total length: 105 mm tool system: KM40 2 plate seats New ! Dimensions ( tool head ): 105 x 40 x 50 mm Dimensions ( transport box ): 110 x 60 x 60 mm

Facing and boring head PAGUS MK4 holder (machine side): MK4 with internal thread M14 x 2.0 Depth: 30 mm holder ( turning chisel ): 8 x 8 mm / 2x Ø 10 mm used, tested ! Dimensions: 202 x 57 x 55 mm

Face and boring head, with impact cutter PAGUS MK4 holder (machine side): MK4 with internal thread M16 x 2.0 Depth: 30 mm receptacle ( turning chisel ): 8 x 8 mm used, tested ! Dimensions: 285 x 95 x 110 mm

LED articulated head lamp, machine lamp, system light WALDMANN SPOT LED 003 3x 6 W 24 V AC/DC Cable length: approx. 1.0 m Magnetic base: Ø 86 mm used, tested ! Dimensions ( without cable ): 140 x 120 x 150 mm

- technically efficient, ready to work - after full service

Dividing head, dividing head, dividing table, with tailstock TOS KURIM Type DU200AN Center height: 105 mm Dividing head: Receptacle: Inner diameter: Ø 48 mm, depth: 50 mm -10° - +100° tiltable spindle bore: Ø 22 mm Base: 155 x 215 mm tailstock with quill and fixed grain tip Tool holder: MK3 quill stroke: 40 mm quill: +/- 5° tiltable foot: 100 x 140 mm used, tested ! Dimensions ( dividing head ): 400 x 395 x 230 mm Dimensions (tailstock) ): 242 x 100 x 125 mm

Dividing head, dividing head, dividing table, with tailstock WMW Center height: 135 mm Dividing head: Mount: Three-jaw chuck DH 160 x 3 diameter: Ø 160 mm, bore Ø: 422 mm -10° - +100° tiltable spindle bore: Ø 48 mm Base: 220 x 300 mm tailstock with quill and fixed grain tip center height: +15 / -10 mm height adjustable quill stroke: 30 mm Base: 120 x 177 mm used, tested ! Dimensions ( dividing head ): 450 x 480 x 260 mm Dimensions ( tailstock ): 235 x 120 x 140 mm

2 pieces Hohner head mounts (suspension) for Theisen & Bonitz Booklet Maker Price per 1 pc. Art.: PS3135

Year: 2002 - technically efficient, ready to work – after full service - minimum welding dimension: 370 mm - maximum welding dimension: 2500 mm - profile supports

Brand new Wartsila L20 cylinder head unused in brand new condition with markings & certificate We also have many consumable new spares and gaskets for L20 B and C type engines Please contact us at info@fin-marine

Wartsila 22 cylinder heads 10 pcs avaliable tested for cracks, water pressure with rocker arms, exh & inlet valves, injection valve, starting valve and safety valve we have also have piston/ con rod/ oil pump/ fuel pump/ cooling water pump for same engine in stock send reach us at: info@fin-marine.com fin-marine

6 er BVS MCA Verschließer und 6er Aufdrücker Plastik Closer Twist & Plob More then 300 machines new and second hand on our seema .de

Capacity: 10.000 bph Format parts: 0,75 L Bordeaux 310 and 330 and 1,0 L Schlegel More then 300 machines new and second hand on our seema .de

Standard: - Stufenlose Temperatureinstellung; - Stufenlose Luftmengeneinstellung; - Getrennter verriegelter Hauptschalter für Heizung und Gebläse; - Integrierter Geräteschutz; - Heizelementrohr mit Schutzrohr. - inkl. Aufsatz zum anschrumpfen von PVC kapseln Max. temperature °C 650 More then 300 machines new and second hand on our seema .de

Kunstoff Schraubverschluss More then 300 machines new and second hand on our seema .de

set for 31,5 x 24 caps. 3 capping heads More then 300 machines new and second hand on our seema .de

In- and outlet on the right side set to 28 MCA 6 heads Capacity: about 10.000 bph amount of capping heads: 6 capacity / hour ca.: 10000 working direction: rotating turret Drive: Treibriemen / variabel More then 300 machines new and second hand on our seema .de

8 Verschließköpfe; mit 2 Formatsätzen und einer Schnecke  Laufrichtung: links-rechts Anzahl Köpfe: 8 More then 300 machines new and second hand on our seema .de

amount of capping heads: 5 capacity / hour ca.: 10000 type of closures: 28 x 15 working direction: left-right cap sorting system: sorting by disc weight [kg.]: 1000 electrical power supply kW: 380 More then 300 machines new and second hand on our seema .de

0,75 Kw, Regelbar More then 300 machines new and second hand on our seema .de

in very good condition capacity / hour ca.: 6000 amount of capping heads: 4 More then 300 machines new and second hand on our seema .de

including speed regulator and a foot. Without belt. More then 300 machines new and second hand on our seema .de

Idle Head, without motor, without foot More then 300 machines new and second hand on our seema .de

amount of capping heads: 6 capacity / hour ca.: 10000 type of closures: 28 x 15 working direction: right-left (CCW) cap sorting system: Vibrating container weight [kg.]: 1,5 More then 300 machines new and second hand on our seema .de

Manufacturer: FIMER, type T/6-V.A. Year of constr. 2000 6 capping heads. for 28 MCA amount of capping heads: 6 working direction: right-left (CCW) More then 300 machines new and second hand on our seema .de

z.B. for Borelli Alexa / Futura screw capper More then 300 machines new and second hand on our seema .de

single head working direction: left-right capacity / hour ca.: 2300 amount of capping heads: 1 Dim. L x W x H [m]: en More then 300 machines new and second hand on our seema .de

with vacuum construction. For 3 bottle types. Single head. More then 300 machines new and second hand on our seema .de

Working direction: left-right Amount of capping heads: 6 More then 300 machines new and second hand on our seema .de

Decapper for screw capps 24 heads More then 300 machines new and second hand on our seema .de

ZALKIN PET-Screwcapper 6 Head amount of capping heads: 6 working direction: left-right type of closures: Twist Off More then 300 machines new and second hand on our seema .de

Year: 2007 - technically efficient, ready to work - after full service - flow limitation: 0.2 mm - maximum welding dimension: 2400 mm - support arms

RECON - with Rotocap - with small nozzle hole (9mm) Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list.

RECON - without Rotocap - with large nozzle hole (11mm) Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list.

RECON - with Rotocap - with large nozzle hole (11mm) Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list.

Recon Part Number: 26.06-144M Air Launch any speed Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 0400 9747 Old socket with slanted injector insert Casting 1230 2010 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Original MWM TCG 2020 Cylinder head 12454716 - refubrished.

Parallelstation,mit Geschwingigkeitsregelung und Fuß -ohne Kettenband 1 kw More then 300 machines new and second hand on our seema .de

Shower head FRIEDRICH GROHE 1/2 ( inch ) connection thread: 1/2 ( inch ) spray disc: Ø 65 mm surface: chrome-plated with stop valve New ! Dimensions: 57 x 49 x 49+ mm

Recon Part Number: SEV1X Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Cylinder head face milling and grinding machine in good condition. Grinding segment wheel diameter 420 mm Table clamping surface 1600x360 mm Table travel 1800 mm Distance between machine table and machine head 825 mm Extensive range of optional accessories Wet machining has never been carried out with the machine