laser cutting used for sale

Brotschneidemaschine verwendet. Sehr guter Zustand.

Shredder mill with blades Brand: Prat, model: P-4, cutting chamber: 600x420 mm, direct motor: 37 kw (50 hp). Open rotor, inclined cut. 980 rpm

Rated power: 19 kVA; Rated current: 29 A; No-load voltage: 280 V; Output current adjustment: 30-120 A; Rated output voltage: 128 V; Max cutting thickness: 45 mm; Cyclic duration factor: 60%; Efficiency: 80%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact 6093

Equipped with F2100B control and Conti-Weld Cinti-Pac 105NH power source, usable table size approximately 2700x1450mm, total size approximately 3500x2250x1500mm.

Soriano brand crusher mill with blades, cutting chamber: 495x340 mm, motor: 7.5 Kw (10 hp). Step rotor, magnet in hopper. No electrical panel.

Shredder mill with blades Brand: Prat, model: P-2, cutting chamber: 350x300 mm, motor: 11 Kw (15 hp), open rotor, soundproof hopper, year: 1990. With electrical panel and manual with safety certificate.

Unused in box

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display;

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated input power: 9.2 KVA Open circuit voltage: 256V Output Current Setting: 20-60A Rated Output Voltage: 104V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

Equipped with mains voltage: 415 V AC ±15 %, 3-phase; Frequency: 50/60 Hz; rated power: 19.4 kVA; output current: nominal 120 A; duty cycle 60%; Efficiency: 0.85; IP23 degree of protection; cutting up to approx. 35mm; internal air pump; Transport 655x385x625mm 35kg; Unused in box

Rego Herlitzius Rotec 350 circular knife bread slicer Type: Rotec 350 - Circular knife - Year of construction 2010 - Cutting width: 3 – 25mm - completely made of stainless steel - for breads max 3250mm length - on wheels - tested and cleaned External dimensions: 83x70x107cm (WxDxH)

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Nominal Input Strength: 29A Rated input power: 19 KVA Open-circuit voltage: 280V Output Current Setting: 30-120A Rated output voltage: 128V Cyclic duty cycle: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact welding (arc formation): Yes

With work table

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095

Center height: 315 mm Center width: 1000 mm Circulating Ø: 630 mm Spindle bore: 74 mm Spindle holder: Size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 7 - 710 rpm Feeds: longitudinal/flat 0.063-4/0.030-2 mm/rev Thread pitches: 1 - 14 mm electrical connection: 380 V kW Space requirement: 2750 x 1250 x 1380 mm Weight: approx. 4200 kg

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated input power: 9.2 KVA Open circuit voltage: 256V Output Current Setting: 20-60A Rated Output Voltage: 104V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

Unused, in 3 boxes

Rated power: 19 kVA; Rated current: 29 A; No-load voltage: 280 V; Output current adjustment: 30-120 A; Rated output voltage: 128 V; Max cutting thickness: 45 mm; Cyclic duration factor: 60%; Efficiency: 80%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact 6093

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

Rated power: 9.2 KVA; Rated current: 14 A; No-load voltage: 256 V; Output current adjustment: 20-60 ; Rated output voltage: 104 V; Max cutting thickness: 20 mm; Cyclic duration factor: 60%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6094

SECOND-HAND DOUBLE SIDED CUTTING SAW BORING BERLE MOD. TB2000 -Volt. 380/50 - S/N 2401011 - CE rules

Code: 0046 Brand: OMS Model: FC 300 RAP - CE Standard Crosscutting machine with suction base for cutting frames, furniture, window frames, Pvc, aluminium - CE Standard Technical data Blade diameter mm 300 Motor Watt 2800 three-phase - Rpm 3000 Swivelling head Base with suction unit Overall dimensions mm 500 x 400 x 1500 h Weight kg 80

Equipped with Rated Input Voltage: 1P AC380V ±15% 50/60Hz; Rated input strength: 14A; Rated input power: 9.2 KVA; Open-circuit voltage: 256V; Output current setting: 20-60A; Rated output voltage: 104V; Cyclic duty cycle: 60%; Efficiency: 70%; Insulation class: F; Protection class: IP21; Welding by contact (arc formation): Yes; Unused in box

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display;

Equipped with mains voltage: 415 V AC ±15 %, 3-phase; Frequency: 50/60 Hz; rated power: 19.4 kVA; output current: nominal 120 A; duty cycle 60%; Efficiency: 0.85; IP23 degree of protection; cutting up to approx. 35mm; internal air pump; Transport 655x385x625mm 35kg; Unused in box

TECHNICAL SPECIFICATIONS Manufacturer: MicroStep Europe Designation: Plasma cutting machine CNC Type: SPL-P 9001.20+S500 Year of construction: 2008 Design: with KJELLBERG plasma source HiFocus 280i Composed of: - MicroStep CNC guide machine SPL-P 9001.20+S500 - CNC machine control MSNC-500 for WindowsXP - CNC flame cutting table with sectional extraction / 9000x2000 mm - Slag trays for the integrated shaft - Kjellberg plasma source HiFocus 280i, with autom. Gas console - CNC interface for HiFocus 280i

Unused, in 2 boxes

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated input current: 29A Rated Input Power: 19KVA Open circuit voltage: 280V Output current setting: 30-120A Rated output voltage: 128V Cyclic continuous factor: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact arc ignition Weight: 38KG Dimensions: 690 x 335 x 575

Quick cutting machine with 76cm cutting width Insert height 11cm Inlay depth 76cm Hydraulic pressure infinitely adjustable, 150daN-2500daN Program control, direct dimension input Electrical connection 400V/50Hz

- technically efficient, ready to work – after full service - pneumatic profile clamping - manual feed

Rated power: 9.2 KVA; Rated current: 14 A; No-load voltage: 256 V; Output current adjustment: 20-60 ; Rated output voltage: 104 V; Max cutting thickness: 20 mm; Cyclic duration factor: 60%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6094

Main technical data: Center height: 560 mm Distance between centers: 5000 mm Bar passage: 105 mm The lathe is in good condition, being cleaned and visible at Ns. site.

Unused Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated Input Power: 5.5KVA Open circuit voltage: 243V Output current setting: 20-40A Rated output voltage: 96V Cyclic continuous factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc flash due to contact Weight: 6.9KG Dimensions: 375 x 155 x 300

Unused Rated power: 9.2 kVA Rated current: 14 A Open circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

Unused

ECKERT JANTAR 2 plasma-gas cutting machine manufactured in 2013 in Poland, is designed for cutting sheets made of e.g. black steel and stainless steel. The machine’s high-quality steel portal has been extended by an additional 700 mm to facilitate the loading and unloading of larger sized workpieces. A sectional extraction table with a length of 6000 mm and a width of 3000 mm effectively eliminates contamination generated during the cutting process, ensuring a high level of safety and great user comfort. Outside the working area of the JANTAR 2 plasma cutting machine, there is a system for cutting pipes and profiles with a special gear and rotating head, giving the possibility of precise cutting of pipes up to 300 mm in diameter by plasma or gas. The machine is also equipped with, among others, an ECS 872 CNC control, a WALTER SKTG 5.5/15 SM screw compressor, a KJELLBERG HiFocus 161 ...

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated input power: 9.2 KVA Open circuit voltage: 256V Output Current Setting: 20-60A Rated Output Voltage: 104V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

Plasma Cutting/Oxyfuel ESAB Numorex for sale Technical data: - Plasma source: 240/360 A - Bevel plasma torch for chamfer cutting - Vibrating suction bench for evacuating pieces - Smoke extraction system.

Pile cutter with automatic paper pressing, 48cm cutting width .1 spare knives and cutting bars

In 2 boxes, unused

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated input power: 5.5 KVA Open circuit voltage: 243V Output Current Setting: 20-40A Rated output voltage: 96V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact