134,938 used machines on RESALE, but how to find them? Machine Search
Height=1.33 m, Overall length= 1.63 m, Overall width= 0.71 m,
Impressions=0 m, Condition= Very Good , Availability= 2026-07-07, Additional 3 knifes. Available: immediately
A Flow Europe CNC waterjet cutting system is available. Working dimensions X/Y: 3600mm/2000mm, continuous operating pressure: 3800bar, pump type: Flow HyPlex 50, operating hours: 4342, major pump maintenance at: 4102h, control system: Flow Master-PC, module version Path/Cut/FlowNest: 6.0. Including clamping and fixturing device, Flow setup and positioning aids with laser pointer, light barriers, sand silo, Flow mixing unit, water softening system, new pump maintenance kit, various spare parts, and all piping and cables. The collision sensor has a defect. Documentation vorhanden. An on-site inspection is possible.
A planer cutting machine in need of repair is offered. Cutting width: 1150mm, insertion depth: 1150mm, max. stack height: 165mm, max. cutting height: 165mm, table height: approx. 900mm, max. back gauge speed: approx. 300mm/s, back gauge positioning accuracy: 0.01mm. Smallest cut without false plate: approx. 25mm, smallest cut with false plate: approx. 90mm, clamping pressure range: approx. 150daN-4500daN, safety clamping pressure: 30daN, max. knife strokes: approx. 45strokes/min. Machine dimensions X/Y/Z: approx. 2600mm/2500mm/1650mm, weight: approx. 3200kg. The measuring system is defective. Inspection by appointment possible.
Manufacturer: Hegla Year of manufacture: February 2002 Model: VSG-A 46 MT Type of machine: Cutting system for laminated safety glass (VSG) Running direction: right to left Connected load: 35 kW Dimensions of the system (width x height x length): 13.2 x 6 x 1 meters Maximum glass size (width x height): 4600 x 3210 mm Maximum single glass thickness: 16 mm Condition: Rated 2 out of 6 (good), where 1 is very good and 6 is unsatisfactory Operational status: Operational (yes) Additional equipment: Annual maintenance carried out by Hegla Additional documentation included: Operating manual, wiring diagram, layout drawing Remarks: Stops are worn in line with the age of the machine; mechanical alignment required Find more here - .ucymachines/ Contact us at - sales@ucymachines
A ZinserCNC plasma cutting machine is offered, max. plasma capacity: 130A, max. plasma material thickness: approx. 25mm, max. oxy-fuel material thickness: approx. 200mm, cutting table dimensions X/Y: approx. 2750mm/10500mm, working area X/Y: approx. 2000mm/9000mm, X/Y drive: rack and pinion, control: Zinser CNC 500. Inspection possible by appointment.
A custom-built slitting and straightening machine Grossmann/BFW for aluminum strip is available. Strip width: 35mm, Straightening unit: multi-roll, Knife type: rotary knives, Strip guidance: roller guidance, Tension control: KTC800A. Documentation available. An on-site inspection is possible.
IDEAL 7260 Pile Cutter, Year 2019 electric, cutting length 720 mm, cutting height 80 mm, automatic pressing, programmable back gauge, Light barrier, air table, Made in Germany.
One Gietz platen die-cutting and embossing press and one Polygraph free-arm wire stitching machine are offered. 1) One Gietz Presto platen printing, die-cutting and embossing machine, max. paper size X/Y: approx. 320mm/480mm, frame size X/Y: approx. 320mm/460mm, working area X/Y: approx. 350mm/480mm, max. paper size without additional equipment: approx. 330mm/470mm, capacity: approx. 2500strokes/h, flywheel revolutions per stroke: 8, flywheel diameter: approx. 725mm, flywheel width: approx. 50mm, working height: approx. 900mm, weight: approx. 1100kg. Inspection possible by prior arrangement. 2) Polygraph 781/1L50 RF free-arm wire stitching machine, year of manufacture: 1960, number of stitching heads: 1, max. stitching thickness: approx. 8mm, stitching arm length: approx. 500mm, front stitching arm width: approx. 10mm, inside staple crown length: approx. 12mm, max. stitching capacity: ap ...
Reference Num.: 4452 Brand: Polar Type: 78 E Construction year: 1996 Available: directly Status: Not in production Location: Deutschland Cutting Size: 780 mm Equipment: - Lufttisch - Seitentische - Lichtschranke - Programm - Farb-Monitor
Ref.nr. 00926 Name of the plant Struers Labopol Grinding and polishing workstation For sale is a professional grinding and polishing workstation Labopol for metallographic sample preparation. The system is suitable for laboratory, quality assurance and materials testing. Manufacturer: Struers Model Labopol 2 Year of construction Condition Technically OK Can be viewed under power Remark Grinding machine function with diamond grinding wheels + water cooling Ref.Nr 00927 Name of the system Struers Labotom-3 separator For sale is a Struers Labotom-3 precision separator for materials testing and metallographic sample preparation. The machine enables precise and reproducible cutting cuts. Manufacturer: Struers Model Labotom-3 Year of construction unknown Condition Good technical condition, can be demonstrated under power Remark Cutting device for grinding ...
Cauhe S-IV A 120×160 Hot Stamping Press - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Cauhe S-IV A 120×160 Hot Stamping Press Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Cauhe S-IV A 120×160 Hot Stamping Press Price: 37500 EUR Download PDF Cauhe S-IV A 120×160 Hot Stamping Press The machine is fully operational, like new. Made in Spain. Format: 1200x1600mm Weight: 10,000kg Power supply: 380V Motor: 11 kW Impact force: 2 Tm/dm² Equipment: – Pneumatic clutch and brake – Control panel – Full-format heating plate with 3 heating sections – 3 operating modes: continuous, time ...
Key data: 12 mm, 3000 1/min, 1250 mm
Automatic thread processing machine Multitapper 1212 CoastOne - Made in Finland Demonstration machine Machining area: 1250x1250mm Thread sizes: M2-M10 Number of spindles: 3 (optional 4; only retrofittable) 2x threading, molding; 1x Lowering Station Microlubrication for each spindle / tool station Control: TC15 touch screen Numerical Input, Import of Punches - NC Files Warranty: 36 months after installation Immediately available; Subject to prior sale Viewing under power possible at any time by arrangement
General Description Accessory and tooling package manufactured by EUROTECH for a portable in-situ flange facing machine. The package includes transport cases, clamping rings, machining accessories and tooling for resurfacing flanges of various diameters during on-site maintenance operations. Technical Details Manufacturer: EUROTECH Machine type: Flange facing tooling package Year: Not confirmed Heavy-duty transport cases Multiple adapter/machining rings (markings visible: RING 340, RING 380, RING 430, RING 600) Split clamping ring assembly Linear slide and feed assemblies Tool holders and machining heads Measurement and setup accessories Fasteners and spare parts Electrical accessories and cables Documentation and packing lists included Condition Very good industrial used condition. Components are stored in organized transport cases with protective foam inserts. Prec ...
speed of feed:: 60 m/min feed:: 5 - 99.999,9 mm cuts max.:: -- Schnitte/m cross-section width:: 5 - 90 mm cross-section heigth:: 5 - 90 mm Condition: Second-hand, Specification: Strip and tube cutting unit • Cutting unit: Impact blade cutting with cutting sleeves • Material diameter approx.: 5–90 mm • Conveyed by two drive belts • Distance between the belts max.: 90 mm • Belt adjustment via motor, controlled via control panel • Lower belt fixed, upper belt motor-adjustable • Belt contact length approx.: 500 mm • Contact width: 80 mm • With a maximum speed of approx.: 60 m/min • Electronic length measurement: 5 – 99,999.9 mm • Maximum cutting accuracy: +/- 2 mm • Cutting is performed by a servo motor: 1 kW • Power supply: 380/400V, 50Hz, 5kW • Material feed direction: from right to left • Weight a ...
thread dia.: bis 4 / 100 mm threading length: ? mm thread pitch: div. mm accessories:: 4 Schneidköpfe total power requirement: 0,75 kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 1,511,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table width: 3000 mm table length: 1500 mm burner heads: 1 Plasma cutting system HEZINGER PlasmaLine EPJ / ECKERT with extraction system PFC-4 Plus 4kW F3800 Technical data HYPERTHERM Powermax 125 plasma cutting unit: Cutting capacity: Recommended: 38mm Maximum: 44mm Separating cut: 57mm Piercing: 25mm Output current: 30-125A Mains connection: 400v-36A Compressed air requirement: 260l/min Air pressure 5.9bar Dimensions: 592 x 274 x 508 mm Weight: 49kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: bis M 24 turning speeds: 0-600 / 0-150 U/min thread: M5 - M24 working area: 2050 Rmax. working range: 500 Rmin. work height max.: 900 mm table surface area: 700 x 900 mm oil volume: 100 l engine output: 3,0 kW weight - pallet system: ca. 300 kg Furnishing: - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) including table clamping disk Swivel movement is smooth thanks to built-in gas pressure dampers - mobile machine base Oil tank + hydraulic unit integrated in the base frame hydraulic pressure gauge - continuous speed adjustment - vertical/horizontal thread cutting possible - Lateral sorting of the quick-change inserts possible - Connection cable with 16A plug Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 The data for this ad was created with ModulMWS - the software so ...
x-travel: 4000 mm y-travel: 2000 mm z-travel: mm : 4000 bar total power requirement: 35 kW weight of the machine ca.: t dimensions of the machine ca.: m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC ...
volt: 380 V weight: 1,4 t : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: ja : VDI 20 : number: 3 Stück im Paket : Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working length: 8000 mm working width: 3500 mm Power: 300 A Plasma source: Nertajet type: HP 300 CNC burner heads: 1 1 head Plasma 1 head Autogan The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cutting range round: 12-273mm, square: 12-200x12-200mm, rectangular diagonal: less than or equal to 273mm, profile cutting: U-, L- and H-profiles with flange lengths less than or equal to 180mm, maximum weight of a single tube: 200kg, remnant length (tailing): greater than or equal to 150mm, maximum manual loading length: 7100mm, maximum acceleration: 1.2G, maximum travel speed: 120m/min, positioning accuracy: +/-0.03mm/m, machine dimensions (with loader): 12,500x4,700x2,600mm. Equipment: Raycus 3 kW laser source, HSG Blade laser cutting head, Rexroth/SANYO DENKI/Inovance servo motor, Shimpo rack-and-pinion drive, linear guide, HSG machine platform, HSG automatic self-centering chuck, HSG X9000 control system, TTN nesting software, MOOXEE/Lanny proportional cutting gas valve (6kW), water chiller and installation kit, with documentation. The machine has not been used and an on-site inspec ...
Polar 92 CE, running daily, good condition with 3 extra knifes, one has been newly sharpened. Availble immediately.
Reference: Lebendigig - Lot 84 Auction-ID: A7-49056-238
The Lemorau MEBR+ is a digital finishing machine built in a modular concept where it can be added modules according to customer needs. The MEBR+ runs in full rotary and semi-rotary mode. Semi-rotary for short runs and full rotary for high speed longer runs. The registration tolerance is maintained during acceleration, deceleration and production time due to the latest servo technology. The Lemorau MEBR+ is equipped with a servo-driven compensator system which provides superior web tension control when the machine is running in semi-rotary mode., Standard Features, - Maximum rotary speed 200 m/min (656 ft/min.) – Blank labels, - Maximum rotary speed 120 m/min (394 ft/min.) – Die cutting to register, - Maximum semi-rotary speed 40 m/min (131 ft/min.) dependent on plate size – Die cutting to register, - Web width 250, 330, 400 mm (10, 13, 16 in), - Electronic Counter (Labels/ Meters/ ...
Reference: Lebendigig - Lot 83 Auction-ID: A7-49056-237
Bread slicer JAC Slim compact machine Adjustable cutting thickness oil-free cut 110 to 130 slices per minute Connection 230V, Dimensions: 603 x 714 x 1434 mm, WxDxH Used machine
The GM PN100S model is an automatic cutting machine for cores with a maximum length of 100 cm. The device is operated via a touch display., Max. wall thickness: 10 mm, Core inner diameter: 25 mm (1) - 120 mm (4.7), Includes the following core adaptors: 40, 50, 76 and 100 mm
Key data: 600 mm, 400 mm, 310 mm
High-quality FANUC wire EDM machine in top condition. The machine is well-maintained, ready for operation and is suitable for precise wire EDM work in tool, mould and precision machine construction. Manufacturer: FANUC Model: ROBOCUT α-1iD Type: A04B-0320-B001 #E5 Machine No.: P089D1671 Year of manufacture: 09/2008 Control: FANUC Series 310iS-WA Machine Type: CNC Wire EDM Machine X-axis: 600 mm Y-axis: 400 mm Z-axis: 310 mm U-axis: 200 mm V-axis: 200 mm Rapid traverse X: 900 mm/min Rapid traverse Y: 900 mm/min Rapid traverse Z: 900 mm/min Rapid traverse U: 450 mm/min Rapid traverse V: 450 mm/min Max. workpiece weight: 1,000 kg Machine weight: 3,000 kg Mains connection: 200 V AC, 3-phase, 50/60 Hz Connected load: 13 kVA Automatic threading of the wire Processing in a full bath Suitable wire diameter: 0.10-0.30 mm Condition: Top Condition Location: Freiburg
An automatic G.A.V.O. Meccanica core cutting machine including a Debus filtration system is offered. 1) G.A.V.O. Meccanica core cutting machine, type: TCRG 300, year of manufacture: 2021, outside diameter range: 80mm-230mm, optional max. outside diameter: 330mm, max. loading length: 3000mm, max. cutting length: 3000mm, min. cutting length: 15mm, min. wall thickness for cardboard cores: approx. 4-5mm, min. wall thickness for plastic cores: approx. 2-3mm, output: approx. 180-300 cuts/h, control: Siemens, cutting length tolerance: +/-0.3mm. 2) Debus filtration system, type: DES DUS 1813, year of manufacture: 2018, extraction capacity: 30m³/min. Documentation available. Inspection possible by arrangement.
Technical details Type: Straight knife textile cutting machine Model: 9226 Power supply: 220 V Current: 10 A Configuration: - Vertical reciprocating knife blade - Integrated blade sharpening mechanism - Blade guide assembly - Carrying handle - Fixed support stand - Electrical safety switch Application: - Garment manufacturing - Textile production - Multi-layer fabric cutting - Leather cutting - Technical textile processing - Pattern cutting operations Construction: - Heavy-duty industrial cutting head - Bench-mounted configuration - Integrated sharpening system Dimensions: - Length: Approx. 350 mm - Width: Approx. 250 mm - Height: Approx. 750 mm Weight: Approx. 18 kg Condition: Used, untested Observed condition: - Complete machine present - Handle intact - Sharpening assembly installed - Base stand included - No major cracks visible - Heavy cosmetic we ...
Zum Verkauf stehen professionelle Bäckereischneidemaschinen vom Typ SCHICKART 30 PLUS. Wir bieten 2 Stück robuste, industrielle Schneidemaschinen aus Edelstahl an. Die Geräte sind für das schnelle und präzise Schneiden von Backwaren konzipiert – geeignet für Bäckereien, Konditoreien, Geschäfte, die Gastronomie sowie die Lebensmittelproduktion. Die wichtigsten Informationen: Hersteller: SCHICKART Modell: 30 PLUS Anzahl: 2 Stück Ausführung: Edelstahl robuste industrielle Bauweise Einstellmöglichkeiten und Arbeitselemente zur Anpassung des Gerätebetriebs ausgestattet mit einer Auffangschale Gebrauchtgeräte, sichtbare Gebrauchsspuren optischer Zustand wie auf den Fotos
thread dia.: 1/4 bis 3 / 75 mm threading length: ? mm thread pitch: ? mm turning speeds: 33 U/min total power requirement: 1 kW voltage: 230 V weight of the machine ca.: 0,074 t dimensions of the machine ca.: 1,20,81 m 2 Die heads,4 sets of cutting dies,Pipe cutter, Foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working range: 1.050 x 650 x 250 mm max. workpiece weight: 400 (800) kg control: Agievision AGIE max. conicity: 30° / 100mm travel -x axis: 500 mm travel -y axis: 350 mm travel -z axis: 426 mm travel U x V-axis: +/-70 / +/-70 mm rapid traverse X-axis: 3 m/min rapid traverse Y-axis: 3 m/min rapid traverse U-axis: 0,6 m/min rapid traverse V-axis: 0,6 m/min rapid traverse Z-axis: 0,6 m/min wire dia.: 0,2...0,33 mm total power requirement: 12,1 kVA weight of the machine ca.: 3,9 t dimensions of the machine ca.: 2,8 x 2,4 x 2,3 m Documents: Wire Eroding Machine AGIE - Agiecut Progress 3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting width: max. 4200 mm Cutting depth: 3-300 mm weight of the machine ca.: 8,6 t Cutting thickness: 3 - 300 mm Track width torch portal / track width: 5.000 mm Usable cutting width / cutting width: Max. 4,200 mm Longitudinal path / longit. travel: 16000 mm Autogenous burner head / torches head: 1 (3 / burner / torches) Autogenous burner / autogen: 2 burners / torches The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: / mm threading length: / mm thread pitch: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: 12 mm stroke: / mm table-size: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: 16 mm stroke: / mm table-size: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 275 mm max. module: 6 min. module: 1,5 Control: SINUMERIK 840 C tooth width: 5,5 mm spiral angle: min. 0 / max. 60 ° max. number of teeth: 120 min. number of teeth: 5 ratio of transmission: 1:10 min. ratio of transmission: 1:1 work piece spindle speed: max. 110 U/min blade head turning speeds: 20 - 110 U/min total power requirement: 100 kW weight of the machine ca.: 16,7 t dimensions of the machine ca.: 5,20 x 2,30 x 2,40 m Internal deburring device U axis / Q spindle chip conveyor coolant device Electrostatic air purifier ELBARON no tools No workpiece clamping device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
press capacity: 28 t x-axis: 2000 mm y-axis: 1000 mm machine weight ab.: 11000 kg Youtube-Video-Links: https://www.youtube.com/watch?v=LdcmUuj8QnM&ab_channel=BaestleinGmbH https://www.youtube.com/watch?v=IcEmqxjpnoE&ab_channel=BaestleinGmbH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
movement of X-axis: 500 mm movement of Y-axis: 350 mm vert. movement Z-axis: 256 mm workpiece weight max.: 800 kg weight of the machine ca.: 4.5 t : +/- 70 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: bis M 24 turning speeds: max. 280 U/min thread: M5 - M24 working area: 2050 Rmax. work height max.: 900 mm table surface area: 700 x 900 mm oil volume: 100 l engine output: 3.0 kW weight - pallet system: 280 kg Equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame Oil tank hydraulic unit integrated in the base frame Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug Special accessories included in the scope of delivery : - Tap quick-change inserts according to DIN 376 . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can ...
thread dia.: bis M 36 turning speeds: max. 150 U/min thread: M5 - M36 working area: 2050 Rmax. work height max.: 900 mm table surface area: 700 x 900 mm oil volume: 100 l engine output: 4.0 kW weight - pallet system: 320 kg equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame Oil tank hydraulic unit integrated in the base frame Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug Special accessories included in the scope of delivery : - Tap quick-change inserts according to DIN 376 . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 . M27 / M30 / M33 / M36 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping ...
x-travel: 4216,0 mm y-travel: 2007,0 mm z-travel: 305,0 mm control: CNC table-size: 4902,0 x 2134,0 mm max. workpiece weight: 1465 kg / m² machine weight ab.: 2500 kg total power requirement: 30 kW dimensions of the machine ca.: 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel hig ...
thread dia.: bis M 16 mm turning speeds: 0 - 600 U/min thread: M5 - M16 working area: 2050 Rmax. working area: 500 Rmin. table surface area: 900 mm engine output: 3,0 kW weight: ca. 250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
37.500 € 
