laser cutting machine used for sale

The machine is in good technical condition, after prior agreement it is possible to test it. Tools A, B, C, D Number of stations in the turret 6 (size D) Number of rotary stations 3 Max. number of tools 60 of which rotary - continuously 360 30 Maximum punch diameter (size D) – single 81 mm Maximum punch diameter in magazine XMTE4M 4 x 31.7 mm Maximum punch diameter in magazine XMTE6M 6 x 24.0 mm Maximum punch diameter in magazine XMTE10M 2 x 24, 8 x 12.7 mm Working range in Y axis (with Multitool) 1300 mm Working range in Y axis (single tool) 1250 mm Working range in X axis (with Multitool) 2550 mm Numerically controlled stroke depth 0.1 – 31 mm Automatic clamp repositioning in X axis up to 10,000 mm Max. positioning speed in Y+X axis 80 m/min. Axis acceleration 10 m/sec Number of strokes – (step 1.0mm) 1000/min USB port 6 Weight 7800 kg Max. jaw opening 11 mm Max. stroke 31 mm Pow ...

Gebr. Wabäma Circumat Elektronik 380.260, with circular knife, 1.5 kW, machine no. 04020665

Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1995

cross-section width:: 100 mm cross-section heigth:: 40 mm feed:: 2 - 999.999,9 mm Condition: new, Specification: Impact knife cutting machine CC-600/40 for hoses and profiles - contact length: 600 mm - product diameter: 40 mm - belt width: 100 mm - Tractive force: 400 N to 800 N - Drive: 2 drives upper and lower belt - Conveyor belt speed: 100 m/min - Drive feed, cutting motor: Servo drives - Cutting capacity with blade max.: 4,000 1/min - Connected load: 3.5 kW - Dimensions L/H/B: 1,900 x 1,650 x 960 mm - Weight approx.: 580 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A used bread slicer Treif Pegasus 2602 from 1997 is currently for sale and immediately available in our warehouse in Bielefeld. Bread slicer Treif Pegasus 2602 - Bread slicer without oiling - for long loaves of bread - completely in stainless steel - with cress knife - can be driven on castors - Year of construction 1997

cross-section width:: 700 mm cross-section heigth:: 500 mm feed:: -- mm Condition: used, overhauled Specification: splitter for rubber bales - overhauled with CE - cross section width max.ca.: 700 mm - cross section height max. approx.: 500 mm - cutting force approx.: 10 tons - AC motor: 4 kW, 400 V, 50 Hz - Infeed roller conveyor for product transport - Machine stands on a raised pedestal - Two-hand safety control for driving the blade movement - Safety guard according to current standards - New control cabinet - New on-board system machine - Operating and maintenance manual in English - CE marking - Paintwork: according to customer requirements - Refurbished with 1 year warranty - CE marking, Option: - Output roller conveyor new The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Combination machine Manufacturer Mubea Type KBL100 5-fold combined Flat steel shears 150x19mm Profile steel shears e.B angle iron 160x7mm or 100x12mm Bar steel shear 70mm round Hole punching Jack 16mm All information to the best of our knowledge, but without guarantee!

Treif Diskus Smart Circular Knife Machine digital control Circular knife Cutting width adjustable from 4mm to 15mm 400V 50Hz Stainless steel cladding Weight approx. 150 kg Operating voltage 400 volts Control voltage 24V/DC V AC Rated power 0.9 kW Height: 110cm Width: 65cm Depth: 70cm

Graef Euro 2250 Knife diameter 220 mm Cutting height 155 mm Cutting length 220 mm Cutting thickness 3-15 mm Tabletop unit Footprint 460 x 320 mm Stock: 50 pieces

Treif bread slicer Type: Pegasus Sichelmesser Machine Cutting width: 4 – 14 mm adjustable analog control Stainless steel cladding 380V 50Hz Height: 120cm Width: 100cm Depth: 80cm

The STIGAL DYNAMIC SPEED HQ 1500X3000 plasma cutter was manufactured in 2013 by the Polish company Stigal. A computer-controlled thermal cutter is designed for cutting out shapes from a sheet of metal. It is equipped with, among others in: CNC G-CODE control, CAD / CAM WRYKRYS software, CEBORA PROF 165 HQC aggregate, or a cover protecting the operator's eyesight. The cutter's cutting width is 1500 mm, length is 3000 mm and the thickness is 20 mm. The machine's torch moves at a speed of 330 mm / s and cuts metal sheets with a maximum thickness of 20 mm. The total weight of the machine is 3 tons. Technical data of the STIGAL DYNAMIC SPEED HQ 1500X3000 cutter - cutting length: 3000 mm - cutting width: 1500 mm - maximum material thickness: 20 mm - maximum cutting thickness: 20 mm - permissible table load: 150 kg / m2 - maximum travel speed: 90 m / min - type of burner height adju ...

Rego Herlitzius Roto Shop DL Circular knife machine Stainless steel version mobile Knife reground and coated manual operation via rotary knob Cutting width 3 - 16mm Connection 400V, 16A-CEE plug Bread shaft: 40 x 23 cm Dimensions: 1000 x 700 x 1050 mm, WxDxH Cleaning machine

Wabäma Bread Slicer Sichelmesser Machine Cutting width: 4 – 20 mm adjustable digital control Stainless steel cladding 400V 50Hz Height: 110cm Width: 100cm Depth: 70cm

Treif Diskus Smart Circular Knife Machine digital control Circular knife Cutting width adjustable from 4mm to 15mm 400V 50Hz Stainless steel cladding Weight approx. 150 kg Operating voltage 400 volts Control voltage 24V/DC V AC Rated power 0.9 kW Height: 110cm Width: 65cm Depth: 70cm

Wabäma Bread Slicer Cutting width: 8mm digital control 230V 50Hz Height: 117cm Width: 60cm Depth: 80cm

Treif Diskus Smart Circular Knife Machine Year of construction 2012 digital control Circular knife Cutting width adjustable from 4mm to 15mm 400V 50Hz Stainless steel cladding Weight approx. 150 kg Operating voltage 400 volts Control voltage 24V/DC V AC Rated power 0.9 kW Height: 110cm Width: 65cm Depth: 70cm

Treif Diskus Smart Circular Knife Machine digital control Circular knife Cutting width adjustable from 4mm to 15mm 400V 50Hz Stainless steel cladding Weight approx. 150 kg Operating voltage 400 volts Control voltage 24V/DC V AC Rated power 0.9 kW New Control Board 7 Motherboard New control board New sensor New circular knife with Teflon coating Height: 110cm Width: 65cm Depth: 70cm

ALLCOMP UNICUT CC 5018 automatic cutting machine was built in 2015 in Poland by ALLCOMP POLSKA Sp. z o.o. The machine designed for the manufacture of clothing and all types of sewing products enables the cutting of single and multi-layered materials. It is distinguished by the use of state-of-the-art technology, which enables full automation of the cutting process while reducing material losses. The cutting process is performed by means of a robust oscillating knife, which is automatically sharpened during operation. This solution minimises the number of undercuts and ensures high repeatability of the cut regardless of the type of material being cut. Thanks to the high oscillation speed of the knife at 6000 cycles per minute, all operations are performed rapidly with the highest cutting quality. The UNICUT CC50 automatic cutting machine is controlled by dedicated software, which al ...

X – Axis Travel (600 mm) Y – Axis Travel (400 mm) Z – Axis Travel (270 mm) U, V Axis Travel (80 x 80 mm) Wire Diameter Range (min ~ max) (0.10 ~ 0.30 mm) Work Tank Dimensions (W x D) (1040 x 780 mm) Maximum Workpiece Weight (850 kg)

Jac Bread Slicer Gate Gate machine Cutting width: 10mm Manual operation 400V 50Hz Height: 110cm Width: 60cm Depth: 80cm

Rösen & Robbert Bread Slicer Type: Spa Bayern analog control Cutting width adjustable from: 3 – 15mm for cutting round and elongated breads with lubrication system can be driven on castors External dimensions width 104cm depth: 75cm height:107cm

Offer via gebr. Pipe cutting and chamfering machine Fabr. GF Type GF20 AVM with lifting table Specifications: Pipe outer diameter 283-508mm Wall thickness 1 - 15mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 50 - 163 rpm. Speed levels electronic 1 - 6 Power 1800 W

Cone cutter Martin Tenon cutting and slitting machine Type T27 Speed of the milling shaft 3000 + 4500 rpm Height adjustment range of the milling shaft 145 mm Largest diameter milling tool 390 mm Maximum clamping height 135 mm Spindle diameter 40 mm Milling motor 5.5 / 7.5 kW Speed of the cut-off saw 3000 rpm Height adjustability of the cut-off saw 190 mm Maximum cutting height cut-off saw 100 mm Maximum saw blade diameter 350 mm Lateral adjustability of the cut-off saw 250 mm Engine power cut-off saw 1.1 kW Saw blade spindle diameter 30 mm Travel of the sliding table 1270 mm Shipping Dimensions Machine on pallet 670 kg 1800 mm x 1050 mm x H 1600 mm Sliding table on pallet 83 kg 1200 mm x 800 mm x H 1300 mm Stop rail approx. 10 kg 1860 mm x 160 mm x 160 mm

Offer via Gebr. Tube cutting machine Fabr. GF GEORG FISCHER Type RA12 Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed Speed levels electronic 1 - 6 Power 1600 W used, in good condition.

AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...

Kronen S021 vegetable cutting machine Serial: 021-016 2014 Stainless, The vegetable cutting machine S021 is perfectly suited for cutting decorative spirals of vegetables (e.g. carrots, potatoes, pumpkins, radishes, celeriac, beetroots, zucchinis, etc.) very quickly and simply. By means of variable tools a multitude of spiral thicknesses (e.g. 2 x 2 mm, 2 x 8 mm, 2 x 10 mm - other versions on request) can be produced with a max. product length of 250 mm."

Tube cutting machine manufactured in 2015. This TRUMPF TruLaser Tube 5000 features a working range of 6500 mm in the X-axis and 310 mm in the Y-axis, with a maximum workpiece length of 3000 mm. It supports various tube diameters and has a maximum workpiece weight of 130 kg. If you are looking to get high-quality tube cutting capabilities, consider the TRUMPF TruLaser Tube 5000 machine we have for sale. Contact us for further details.

1250 x 2500mm TLF 2000w Laser STOPA Sheet storage, SheetMaster, ToolMaster, SortMaster Year: 2005

Tube cutting machine manufactured in 2024. This Bodor T2-65-3000W features advanced technology for efficient cutting operations. If you are looking to get high-quality tube cutting capabilities, consider the Bodor T2-65-3000W machine we have for sale. Contact us for further details.

This 3-axis BLM Adige LT9 Combo Fiber 3kW was manufactured in 2012. It features a maximum raw material length of 6,500 mm and can process round tubes with a diameter of up to 225 mm. The machine is equipped with a powerful 3 kW fiber laser, ideal for cutting tubes, profiles, and sheet metal. If you are looking to get high-quality cutting capabilities, consider the BLM Adige LT9 Combo Fiber 3kW machine we have for sale. Contact us for further details.

Good working conditions

M. No.: 167 Format (cm): 58 Equipment / Additional information: 1xreserve knife Very good condition // tested, checked and revised

A Köhler universal cutting table for the food industry is available. Machine dimensions X/Y/Z: approx. 900mm/900mm/1200mm. An on-site inspection is possible.

An automatic Wupa flatbed die-cutting and creasing machine (auto platen) is available. Material weight range: 100-1000g/m², min. sheet size X/Y: 420mm/600mm, max. sheet size X/Y: 800mm/1120mm, max. die-cutting size X/Y: 780mm/1100mm, max. die-cutting force: 240t, max. production speed: approx. 3000sheets/h. An on-site inspection is possible.

Reference Num.: 4449 Brand: Polar Type: 76 EM Construction year: 1986 Available: directly Status: In production Location: Deutschland Cutting Size: 760 mm Equipment: - Programm - Lufttisch

Schickart TS 38 Bread Slicer - Bread slicer with round knife - Table machine - with cutting width adjustment - 400 volts

Equipment: wire pay-off reel, mechanical flywheel, two wire guide tracks, enclosed straightening and cutting section, mechanical cam, eccentric and lever controls, discharge chute for cut wires, pneumatic service unit and pneumatic lines, retrofitted control panel with digital display, emergency stop button and transparent safety cover. An on-site inspection is possible.

A WT Wickeltechnik slitter rewinder is offered. Maximum web width: 1100mm, minimum slit width: 70mm, aluminum foil thickness range: 20µm-120µm, laminate thickness range: 20µm-300µm, maximum speed: 600m/min, maximum unwind roll diameter: 1300mm, maximum rewind roll diameter: 1000mm, maximum web tension: 1000N. An on-site inspection is possible.

ECKERT AGAT SPEED 6000x2000 oxy-fuel cutting machine was built in 2019 in Poland by ECKERT AS Sp. z o.o. The machine is designed for the precision oxy-fuel cutting of sheet metal, enabling the production of high-precision and repeatable components. Machining is performed by a HARRIS oxy-fuel torch based on pre-programmed cutting programmes. A support with a capacitive distance sensor maintains the correct torch height above the workpiece, ensuring a stable process. The 6000 x 2000 mm work space enables the machining of larger workpieces, whilst the machine’s open design ensures convenient access to the work area from all sides. The ECKERT AGAT SPEED is operated via the intuitive ECS 872 CNC controller with a touchscreen. The machine is also equipped with CAD/CAM software, which streamlines project preparation and the management of the sheet metal cutting process. Technical specif ...

Technical details Type: Portable straight-knife fabric cutting machines Quantity: 6 units Application: - Garment manufacturing - Textile production - Upholstery fabrication - Multi-layer fabric cutting - Pattern cutting operations Kuris KVS 700 – Unit 1 - Manufacturer: Kuris (Krauss u. Reichert Spezialmaschinenfabrik) - Model: KVS 700 - Serial number: 281680 - Voltage: 220 V - Frequency: 50–60 Hz - Power: 230 W - Speed: 7000 rpm - Made in West Germany Kuris KVS 700 – Unit 2 - Manufacturer: Kuris (Krauss u. Reichert Spezialmaschinenfabrik) - Model: KVS 700 - Serial number: 299493 - Voltage: 220 V - Frequency: 50–60 Hz - Power: 230 W - Speed: 7000 rpm - Made in West Germany Axis Straight-Knife Cutter - Manufacturer: Axis - Made in U.S.A. - Serial number: 18528 - Voltage: 110/220 V - Phase: 1 - Current: 7.4/3.7 A - Power: 0.625 HP (approx. 0. ...

Technical details Type: Straight-knife fabric cutting machines Quantity: 6 units Application: - Garment manufacturing - Textile production - Upholstery fabrication - Multi-layer fabric cutting - Pattern cutting operations GEMSY GEM-8 Straight-Knife Cutters - Quantity: 4 units - Manufacturer: GEMSY - Model: GEM-8 - Voltage: 220 V - Frequency: 50/60 Hz - Speed: 2850/3400 rpm - Phase: 1 - Country of origin: China KM Straight-Knife Cutter - Quantity: 1 unit - Manufacturer: KM - Model: KS-K - Serial number: 1327216 - Year: 2008 - Voltage: 220 V - Frequency: 50/60 Hz - 100th Anniversary edition marking visible - Integrated blade sharpening system Small Vertical Cutter / End Cutter - Quantity: 1 unit - Vertical blade cutting machine Construction: - Heavy-duty base plates - Vertical reciprocating cutting blades - Integrated blade guides - Hand-guided o ...

Treif bread slicer Type: Discus 400 Circular knife digital control Year of construction 2010 Cutting width: 4 – 20mm with storage compartment 400V 50Hz Weight approx. 200kg Height: 110cm Width: 82cm Depth: 72cm

Offered for sale is an Esab CNC plasma cutting machine. Track gauge: 3000mm, max. cutting width: approx. 2500mm, max. positioning speed: approx. 25m/min, cutting process: plasma, control: Esab CNC control. Machine dimensions X/Y/Z: approx. 4425mm/1676mm/1930mm. Inspection by appointment possible.

Treif bread slicer Type: Discus 400 Circular knife digital control Year of construction 2010 Cutting width: 4 – 20mm with storage compartment 400V 50Hz Weight approx. 200kg Height: 110cm Width: 82cm Depth: 72cm

CNC portal flame cutting machine Manufacturer: MGM Type: Cortina DS3100 Retrofit 2022 CNC control: MS300 Track width: 3,100 mm 1 oxy-fuel burner gas type as desired Track length: 5 or 6 m without table

Working area X/Y: 1500mm/3000mm, plasma source: NERTAJET HP120, control: DIGISAF 100, max. cutting capacity steel/stainless steel/aluminum: 20mm/15mm/20mm, wet and dry cutting possible, extraction system available. Documentation available. Inspection possible by arrangement.

Plasma cutting machine manufactured in 2020. This PLASMACUT 3015T features a cutting area of 3,020 × 1,520 mm and a maximum plate thickness of 50 mm. It includes a robust gantry drive system and operates with a Hypertherm Powermax 105 Sync plasma power source. If you are looking to get high-quality plasma cutting capabilities, consider the PLASMACUT 3015T machine we have for sale. Contact us for further details regarding this machine.

SAF OPTITOME 15 CNC plasma cutting machine was built in France in 2003. The machine is used to cut shapes in workpieces made of stainless steel, mild steel or aluminium. Depending on the previously choiceed nozzle, workpieces can have a thickness from 2 or 3 mm up to 18 mm. The high cutting quality is achieved thanks to the use of a lightweight and rigid transverse beam with efficient drive, mounted on an extremely rigid and robust machine frame. The installed working table with dimensions (L x W) of 3000 x 1500 mm allows the reduction of mechanical stresses arising during thermal cutting or sheet loading/unloading. The plasma cutting machine is supplied with equipment consisting of among others: a NERTAJET HP 125 plasma source with a power of 125 A and a DIGISAF 100 CNC control. Technical data of the SAF OPTITOME 15 plasma - materials to be cut: stainless steel, mild steel, alumi ...

Power: 5.5 kW, saw blade Ø 650 mm, cutting range approx. 250 mm Auction-ID: A1-47168-43

ECKERT JANTAR plasma cutting machine was manufactured in 2017 in Poland. Characterised by a robust and stable construction, the machine is designed for cutting shapes in workpieces made of mild steel, stainless steel or aluminium. For precise machining of sheets having a maximum thickness of 38 mm (mild steel) or 25 mm (stainless steel and aluminium), it uses a plasma torch equipped with an HD3000 support with distance adjustment by measuring the plasma arc voltage. The process of cutting workpieces is carried out on a working area measuring 2000 mm in length and 3000 mm in width, equipped with an extraction table eliminating the impurities generated during processing. The plasma cutting machine is offered with a wide range of equipment, including: modern CNC controller ECS 872 for full control over the operation of the machine, and a HYPERTHERM HPR130XD plasma source. Technical da ...