127,838 used machines on RESALE, but how to find them? Machine Search
Radius cutter, milling cutter -Finishing cutter -1x Diameter: 84 mm Height 44 mm R12 mm -1x Diameter: 102 mm Height 53 mm R15 mm -1x Diameter: 114 mm Height 70 mm R20 mm Type: HSS Quantity: 3 pieces -Sale: only complete set -Weight: 5.4 kg
Link pipe cutter, pipe cutter -cutting pipe diameters: 80 - 200 mm -The number of links allows the device to be adjusted to the desired pipe diameter. -steel cutting wheel -Ideal for working in trenches -Transport case -Weight: 11 kg
Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 160 mm -Number of teeth: 10 - Carbide indexable inserts: 16 mm -Recording: SK50 -Weight: 14 kg
Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA6 Saw has been completely overhauled and tested. - Engine completely new - Gearbox re-stored and new seals Technical data: Outer pipe diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.
Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 125 mm -Number of teeth: 6 -Indexable inserts: Carbide -Recording: SK50 -Weight: 10 kg
Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 200 mm -Number of teeth: 12 -Indexable inserts: Carbide -Recording: SK50 -Weight: 18 kg
Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.
End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool -Diameter: 40 mm -Working height: 50 mm -Recording: SK50 -Weight: 4 kg
Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 130 mm -Number of teeth: 10 -Indexable inserts: Carbide -Recording: SK50 -Weight: 10 kg
Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 63 mm -Fresh height: 49 mm -Mounting hole: Ø 22 mm -Weight: 0.75 kg
Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 40 mm -Working height: 35 mm -Recording: MK 4 -Weight: 1 kg
Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer diameter: 180 mm -Quantity: 2 cutters -Bore: Ø 35 mm -Price: complete -Weight: 9.5 kg
Type New Bowl choppers Warranty 12 months Height 1240 Width 1900 mm Length 1170 mm Weight 1200 kg Capacity 80 l Voltage Electrical: 400V 50Hz 3N Installed Power 14 kw Main material Stainlees Steel
Category New machines Subcategory Mechanical Treatment of Meat Type New Bowl choppers Warranty 12 months Height 1350 Width 2290 mm Length 1300 mm Weight 1800 kg Voltage Electrical: 400V 50Hz 3N Installed Power 39.9 kw Main material Stainlees Steel
Disc cutter, saw blade, cutter -various: diameters -Type: HSS/E Price: per set -Quantity: 2 sets available -Weight per set: 3 kg
Disc cutter, saw blade, cutter -various: manufacturers -Various diameters: Ø 45 mm - Ø 90 mm, width 1 mm - 8 mm Type: HSS -Sale: only complete set -Weight: 8 kg
Radius cutter, milling cutter -Finish cutter -Various: Diameter -Various: Manufacturers -Type: HSS and SS Quantity: 16 pieces -Sale: only complete set -Weight: 9 kg
Radius cutter, milling cutter -Finishing cutter -Various: Diameter -Various: Manufacturers -Type: HSS and SS -Quantity: 17 pieces -Sale/Price: complete -Weight: 5 kg
Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head -Diameter: Ø 100 mm -Number of teeth: 6 -Indexable inserts: Carbide -Recording: SK50 -Weight: 4.5 kg
Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 180 mm -Height: 35 mm -Radius -Socket: Ø 30 mm -Weight: 5.6 kg
Freezer cutter Rühle GFR 450 in a very good used and functional condition. Completely made of stainless steel, guillotine technology, cutting material temperature down to -20°C, capacity up to 3,000 kg / h. Holding device for 200 l cutter trolley. Throughput width 61 cm, throughput height 33 cm. Dimensions W/D/H 80/230/140 cm. Connection values 400 volts, 7.2 kW, 12.3 A. Workshop tested, immediately ready for use. More on request.
- technically efficient, ready to work – after full service - 6 spindles - automatic - variable angle lower spindles - spindle top 90 degrees
cutting range for steel to: 76 mm capacity at 100%: 51 mm cutting medium: 400 Amp regulated drive: 50-150 und 100 - 400 AmpSteuerSteuer control voltage: 24 Volt weight of the machine ca.: 750 kg dimensions of the machine ca.: 82 x 122 x 930 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
HEIDELBERG Nela plate punch Suitable for HD SM 52 / 74 /102 and XL machines Hole spacing: 425 mm and 780 mm Various year of manufacture models available
Type: W/ARW 2200/12 Flying Splice Comm. 2011-001.1 Working width: 2200 mm Finished roll weight max. 2000 kg Finished roll diameter max. 2x 1200 mm Finished roll width min. 800 mm; max. 2200 mm Material Paper/ Foils 75 μm – 1000 μm Machine speed max. 1500 m/min Depending on the type of material and material thickness achievable Web tension: max. 1000 N Finished roll sleeves: inside 152.4 mm outside 162.4 mm - Type of cardboard sleeve, plastic - Sleeve tolerance according to DIN 6748 or 55470 Unwinding: Type ARW 2200/12 Unwinding: axisless 2 x 1200 mm; sleeve holder 6" L.W. (other dimensions with additional accessories possible) Sleeve holder: 6" L.W. (other dimensions with additional accessories possible) Pulleys: DM approx. 150 mm Brake: Generator brake with energy recirculation, control via ultrasonic sensor Path control: Edge control E&L with ultrasonic sens ...
Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg
REF-1681 SACCARDO ARTURO CHOP CUTTER Completely made of stainless steel. Manufacturer: SACCARDO ARTURO Model: TITANIO 2. Max. cutting length: 1.070mm. Max. cutting section: 210x240mm. Cuts per minute: 90-180 Cutting thickness: 5-60mm Weight: 330 kg. Year: 2008 3kW Dimensions of the machine: 2,367mm x 832mm; h: 1,496mm
Business card modul Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Power supply : 230V – 50/60Hz Machine checked and cleaned
End mill, roller cutter, milling cutter, disc cutter, slot cutter -Manufacturer: Schuler, end mill cutters, disc cutters -Type: 125Wx12x32 HSS K10 -Hole: Ø 32 mm -Quantity: 1x milling cutter available -Dimensions: Ø 125 x 12 mm -Weight: 0.5 kg
End mill, roller cutter, milling cutter, disc cutter, slot cutter -Disc cutter: Ø80 x 20 mm, cross-toothed -Type: WF2-08-40/13 80Ø K10 -Hole: Ø 27 mm -Quantity: 1x milling cutter available -Dimensions: Ø 80 x 20 mm -Weight: 0.5 kg
Consisting of thread cutters in various sizes and designs, partly unused, incl. pallet Auction-ID: A1-45714-34
End mill, roller cutter, milling cutter, disc cutter, slot cutter -Cylinder end mill: Disc cutter 99.6 kg -Type: various versions -Price/Fee: complete -Transport dimensions: 790/600/H210 mm -Weight: 99.6 kg
Working width 115 PTO interventions In crate Auction-ID: A3-43516-11831
max. grinding diameter:50 mm grinding length:250 mm workpiece length:300 mm total power requirement:0,7 kW weight of the machine ca.:330 kg dimensions of the machine ca.:1000 x 1000 x 1400 mm
total power requirement:10,5 kW weight of the machine ca.:4800 kg dimensions of the machine ca.:3000 x 2100 x 2000 mm centre distance:1200 mm Height of centres:200 mm grinding-table stroke max.:X -Achse 1000 mm table-size:2060 x350 mm z-axis:Querhub 250 mm Feed speed:0,005 - 5 m/min. grinding head - swivable:360 ° taper ISO:50 control:Sinumerik System 8 Documents:vorhanden
Vibrator PROFILINE RLA-H.7S, max. format 1220 x 1640 mm with spread roller and pneumatic push-out to the rear, Auto. Rear table assembly with plier transport system AM 1220x1640 mm High-speed cutter SCHNEIDER SENATOR 185 SC-Video Cutting width max. 1850 mm Stacker ABS 145-7B , max. format: 1220 x 1640, max. stack height 1450 mm Footprint approx. 8 x 8 m
Possible to efficiently cut steel up to 25 mm thick, even with heavy materials. A sharp and precise cut, without deformation or damage to the material. Supply voltage: 380 V Rated power: 19 kVA Rated current: 29 A Open circuit voltage: 280 V Output Current Setting: 30-120 A Rated output voltage: 128 V Maximum cutting thickness: 45 mm unused and in the original packaging
Compressed Air Plasma Cutting Machine Maximum cutting thickness: 1-40 mm Current: 20-120 Amps Voltage: 310V Single-tube, full-bridge inverter technology, with sufficient output current for high-intensity operations, precisely preset cutting current + adjustable gas delay.
Robust Gambin 3M milling machine suitable for precision machining of metal in workshops
maximum number of results exceeded
please refine your search
500 € 
