127,442 used machines on RESALE, but how to find them? Machine Search
Height=1.5 m, Overall length= 0.64 m, Overall width= 1.74 m, Net weight= 273 kg,
Accurate and adjustable sharpening system; fine adjustment of cutting angles; adjustable worktable Auction-ID: A1-45225-35
consisting of: 8 large shelves, Fabr. HEGLA, type: FLB, load capacity: 40,000 kg each, for lengths up to: 6,000 mm, tilting table/glass support, Fabr. HEGLA/HAGER, year 1988, Ser no. 0880342, Floatglasschneid- u. Brechtisch, Fabr. HEGLA, cutting bridge, Fabr. HEGLA, type: OPTIMAX 6032ES, built in 1996, Ser no. 6079, Net weight: 6,500 kg, Storage table, Table surface: approx. 3200x6000 mm, with operating terminal, PC tower, monitoring monitor, lattice enclosure and light barrier system
consisting of: tilting table, Fabr. HEGLA, type: ART6032, built in 2005, Ser no. E7662, net weight: 3,900 kg, surface layer unit, cutting table with cutting bridge, Fabr. HEGLA, type: VSG A46-MT, year 2003, Ser-No. 2118, footprint: approx. 3200x7000 mm, dead weight: 11,000 kg, max. working pressure: 6 bar, with control unit, lattice housing and light barrier system
A SAF oxy-fuel cutting system in a single-torch configuration without plasma is available, number of torches: 6, tool holder stroke: 150mm, rapid traverse: 15m/min, cutting speed: 4m/min, max. cutting thickness: 200mm, max. plate dimensions X/Y: approx. 2800mm/6000mm, on-site inspection is possible.
Three-knife trimmer for ShortRun and SingleCopy Softcover products and Hardcover book blocks. The ShortRun D.09 Three-knife trimmer has extreme short change over time and no make-ready parts. Products are trimmed in two separate cutting stations, head and tail trim first and then face trim in the second station. Untrimmed : 325 x 430 mm - 92 x 122 mm Trimmed : 300 x 420 mm - 90 x 120 mm Thickness : 60 mm - 2 mm Head trim : 2 - 25 mm Foot trim : 2 - 25 mm Face trim : 2 - 25 mm Speed : up to 2,400 cycles/hour (in short run mode) - up to 1,200 cycles/hour (in single copy mode)
Clean CUT SA-600 Wire EDM & Eroding Machine Type: Wire EDM and eroding machine Manufacturer: Clean CUT Model: SA-600 Year of manufacture: 2001 X-axis travel: 610 mm Y-axis travel: 630 mm Z-axis travel: 350 mm Dimensions: approx. 1900 x 1900 x 2700 mm Table: 950 x 500 mm Transport dimensions: approx. 1900 x 1900 x 2700 + 1 pallet Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-10
CNC Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Year of Make: 2016 CNC control Working area: 1,500 x 3,000 mm 1 x Plasma with power source Kjellberg HiFocus 161i Preparation for retrofitting oxy-fuel burners Kemper System 8000 filter system with pre-separator Asper Basic nesting software on the CNC control
Food Tools 5AFCE Cheese cutter Stainless, this ingredient reduction machine uses a wire grid to cut up to 40lb blocks of cheese or butter into smaller portions. Up to 120 products per hour, with a box of spare cutting wire, ideal for dairy facilities and bakeries
Polar 58 EM, Year 1994 Program Safety Beams Table Table left Table right Etc. Available: at short term
Cutting table Seewer Rondo SFT362. A23 Pastry Line The robust stainless steel construction of the sheeters and cutting tables guarantees a long service life. Condition: cleaned & tested Total length approx. 360 cm Belt speed adjustable Incl. various cutting rollers Year of Make: 1998 Four time-saving steps1. The dough is gently rolled out and reeled on the sheeter.2. Place the dough belt on the cutting table, where it is uncoiled again.3. The dough sheet is cut into the desired shape.4. You fill and fold the pastries on the
Offer 26102 Technical data: - Cutting range 140 - 330 mm - Wall thicknesses up to 5 mm - 6 cutting speeds 95 - 230 1/min - Central pipe clamping via handwheel - Man. Rotary drive / cutting drive - Height-adjustable sawing unit - Drive 220 V / 1200 Watt - Space requirement approx. W 900 x H 1000 x D 400 mm - Weight approx. 400 kg - 2 x roller conveyor 1500 mm
Key data: 30 mm, 30 mm, 80 mm
Flat steel shears - Flat steel 2° inclination 300 x 10 mm - Flat steel 5° inclination 200 x 13 mm - Knife length 305 mm Profile steel shears - L-profile at 90° 80 x 80 x 8 mm - L-profile at 45° 60 x 60 x 6 mm - Round steelØ 30 mm - Square steel 30 mm 3-point notching station - Flat steel 7mm - Notching depth 50mm - Notching width 40mm Punching station - Punching capacity 450 kN - Material thicknessØ 27 x 13 mm - Projection 175 mm incl. electric stop
Offer 26101 Technical data: - Cutting range 29 - 119 mm - Wall thicknesses up to 5 mm - 6 cutting speeds 95 - 230 1/min - Central pipe clamping via handwheel - Man. Rotary drive / cutting drive - Height-adjustable sawing unit - Drive 220 V / 1200 Watt - Space requirement approx. W 900 x H 1000 x D 400 mm - Weight approx. 300 kg - 2 roller conveyors 1500 mm
Offer 26100 Technical data: - Cutting range 29 - 119 mm - Wall thicknesses up to 5 mm - 6 cutting speeds 95 - 230 1/min - Central pipe clamping via handwheel - Man. Rotary drive / cutting drive - Height-adjustable sawing unit - Drive 220 V / 1200 Watt - Space requirement approx. W 900 x H 1000 x D 400 mm - Weight approx. 300 kg - 2 roller conveyors 1500 mm
Polar 92 ED year 1997 in very good condition Colour monitor light barrier side tables air table
Schneider Seantor 115 MC year 1982 overhault in 2003 with new control board air table side tables light barrier in very goog condition
Offer 23145 Technical data: - Flat steel shears - blade length 420 mm - For flat material 400 x 15 mm - Profile steel shears - no knives available - L-steel at 90° 110 x 10 mm - at 45° 65 x 8 mm - T-steel at 90° 90 x 10 mm - Steel bar shears - no knives available - Round steel / square steel 35 / 32 mm - Notching device - for material up to 12 mm - Triangle notch T 60 mm - Hole punch - punching force approx. 500 KN - - Stroke infinitely variable 0 - 40 mm - Punches in steel up to 30 mm Ø in 15 mm - Projection 410 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1400 x H 1800 x D 700 mm - Weight approx. 1800 kg - with: - various punches + dies - Support stop table - Triangular notching device - 2 St. E. footswitches
Offer 23145 Technical data: - Flat steel shears - blade length 420 mm - For flat material 400 x 15 mm - Profile steel shears - no knives available - L-steel at 90° 110 x 10 mm - at 45° 65 x 8 mm - T-steel at 90° 90 x 10 mm - Steel bar shears - no knives available - Round steel / square steel 35 / 32 mm - Notching device - for material up to 12 mm - Triangle notch T 60 mm - Hole punch - punching force approx. 500 KN - - Stroke infinitely variable 0 - 40 mm - Punches in steel up to 30 mm Ø in 15 mm - Projection 410 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1400 x H 1800 x D 700 mm - Weight approx. 1800 kg - with: - various punches + dies - Support stop table - Triangular notching device - 2 St. E. footswitches
Polar 92 E Year of Make: 1996 E version, color monitor, Air table, 2x side tables, Spare blade Very good condition!
Tenon beater / tenon cutter LÖWER, nameplate not found
Motorized brush cutter DEMON Euro 5.2 KM, brush attachment
Cross-cut and mitre saw METABO KGS 216 M, blade size max. 216 mm, S/N 6017897464
Wet cutting table CEDIMA, nameplate n. found, Fkt. n. known
Wet cutting table CEDIMA, nameplate n. found, Fkt. n. known
Wet cutting table CEDIMA, nameplate n. found, Fkt. n. known
Wet stone cutting table CEDIMA or type designation
Wet stone cutting table CEDIMA or type designation, crack in the lowering arm
Dovetail milling machine / grooving cutter HOFFMANN MU 2, S/N 11971
used
A used cutting machine Polar 78XT Touch screen Side Tables Chrome-plated table Air table
Rotary die-cutting machine Maximum sheet size: 915 × 640 mm Minimum sheet size: 250 × 420 mm Maximum die-cutting format: 915 × 626 mm Die-cutting start: 14 mm - TouchScreen control Siemens S7/1500 with Siemens servo motor - Anti-static device Kersten” DC102 F-K in feeder and delivery - Electronic side lay control - Foil delivery with fan control - Variable sheet brake - Low-pile delivery
a threading machine > - Manufacturer: Rothenberger > - Model: Supertronic 4 SE > - Age: approx. 1 year > - Condition: Very good, technically perfect, little used > - Accessories: 2 threading heads included > - Invoice: available
Polar 78 XS, Year 2011 Display Program Airtable Table left Table right Etc. Available: at short term
The CombiCut oxyfuel drilling system from Microstep offers a cost-effective alternative to high-performance laser cutting systems, especially for thicker sheets. Manufacturer: Microstep Model: CombiCut Year of Manufacture: 2022 Technical specifications: - Cutting area: 6000 x 2000mm - Drilling unit: 26.8 kW – up to M24, drilling up to 40 mm - Includes calibration unit for drilling tools - Includes tool changer (6-position – at the end of the table) - Filter system , suitable for indoor installation - Cutting thickness up to 150mm - Includes BG-compliant safety technology (light barrier) - Includes guided tours (S49) - The portal is driven on both sides for high precision. - Operating hours: 95 hours drilling, 587 hours oxy-fuel - Total hours: System switched on 5600 hours - No technology expansion possible - No CAM software required – the system is compatible with almost any C ...
A used Rego Herlitzius Kobold Bread Gate 9mm is currently for sale and immediately available. Rego Herlitzius - Creel machine - on castors - with lubrication - Cutting machine 9mm - for max. 42cm loaves of bread Technical data: - Manufacturer. HERLITZIUS - Model: Leprechaun - Year of construction: 2005 - Power: 0.75 kW - Nominal voltage: 230 V 50 Hz Dimensions: Width: approx. 61cm Depth: approx. 68cm Height: approx. 120cm
Machine designed for machining solid wood doors with frame and raised panels Workpiece dimensions Length 150 - 3000 mm Width 40 - 300 mm Thickness 20 - 60 mm Material: hard woods/soft woods Machine equiped with 2 working areas, including - 3 NC-axes X, Y, Z - telephone modem - 1 sawing unit - 1 horizontal boring unit - distance horizontal drill above table (Z):max. 40 mm - fixed workpiece table - central lubrication - CE package - max. workpiece length 2.400 mm KOCH Numeric with 3 NC-axes Positioning control with PC Pentium CPU Operating system Windows XP Professional: english 15? Touchpanel VGA + Touchscreen by means of LVDS connection USB-connection on PC and on Touchpanel Seriel and parallel interface on the PC Hard disk 2,5? Input of machine commands and motor control through the Touchpanel PS2 connection for external keyboard Office PC software Stretched machine bas for max. workp ...
Bread slicer MHS Ideal L Stainless steel version Simple technology only DGUV V3 tested by us Connection 400V, 16A CEE plug Used machine cleaned & SAB tested with warranty + spare parts service
Inv. Num. : 9078 Type: LC 3015 F1 NT Producer: AMADA Generated: Parameters: Work table length: 3000 mm Work table width: 1500 mm Feed length X-axis: 3070 mm Y-axis feed length: 1550 mm Feed length Z-axis: 100 mm
Wet cutting table CEDIMA, nameplate n. found, Fkt. n. known
Gear cutters, module cutters, hob cutters, tooth form cutters, module milling heads, end mill cutters, roller cutters, milling cutters, hob cutters, splined shaft hob cutters, gear hob cutters, slotted hob cutters, rack cutters -Module cutter: Hobbing cutter -Type: Mod.3.5 Ø 85 mm -Hole: Ø 32 mm -Dimensions: Ø 85 x 85 mm -Weight: 1.8 kg
For sale is a high-quality lead and pull spindle lathe from the renowned German manufacturer Weiler, model Condor VS 1. The machine convinces with its high precision, robust construction and durability and is in a very well-maintained and technically perfect condition. Ideally suited for the workshop, single part production and precise turning work. General information: Machine Type: Lead and Pull Spindle Lathe Manufacturer: Weiler Model: Condor VS 1 Year of construction: approx. 1977 Condition: Well maintained, technically perfect Availability: Immediately available Technical data: Max. turning diameter over bed: approx. Ø 330 mm Max. turning diameter via support: approx. Ø 170 mm Max. turning length: approx. 800 mm Bar passage: approx. Ø 38 mm Spindle: Speed range: approx. 24 – 2,800 rpm Feed & Thread: Feed range: approx. 0.037 – 1.253 mm/rev ...
Qty. 1 Second-hand Automatic Die Cutter Mfc.: Bobst Type: 102 E II Automatic Die Cutter Built: 1996 Speed: 7,500 Sheet per hour Max. Sheet Size 720 x 1020 mm Raised: 30 cm Steel Plate Feeder Lefthand Pull Sidelay Active Front Lays CUBE Touch Screen Computer Operation Chase with 1.0 mm Cutting Plate Centerline Micrometric Adjustment Quick Lock Chase Double Action Stripper Quick Lock Stripping Frames Spare Stripping Frames Selection Bars And Pins Non stop Delivery New Chains, Clutch & Brake 3 Years ago, only used as a backup machine since then
This 4-axis VOORTMAN VACAM VCS Thermo was manufactured in 2013. It features a working length of 3000 mm and a working width of 1500 mm, equipped with a Kjellberg HiFocus 280i plasma cutting unit capable of cutting up to 70 mm thickness. The machine offers a cutting speed range of approximately 0 â 5200 mm/min. If you are looking to get high-quality plasma cutting capabilities, consider the VOORTMAN VACAM VCS Thermo machine we have for sale. Contact us for further details.
Gear cutters, module cutters, hob cutters, tooth form cutters, module milling heads, end mill cutters, roller cutters, milling cutters, hob cutters, splined shaft hob cutters, gear hob cutters, slotted hob cutters, rack cutters -Manufacturer: Reishauer, hob cutters, 3 pieces -Type: Ø 50 mm / Ø 55 mm / Ø 62 mm -Hole: Ø 27 mm -Price/Fee: complete -Transport dimensions: 115/65/H70 mm -Weight: 1.3 kg
This 3-axis Flow Kent Mach 2 C was manufactured in 2014. It features a working area of 3000 x 2000 mm and operates with a maximum pressure of 60,000 PSI. The machine is equipped with a powerful 75 kW pump and utilizes abrasive waterjet cutting technology. If you are looking to get high-quality cutting capabilities, consider the Flow Kent Mach 2 C CNC waterjet cutting system we have for sale. Contact us for further details.
Complete set of metal hole cutters hss, sizes 20- 25-30-35-40 mm Overall dimensions: 200 x 100 x 100 mm Weight: 1 kg Auction-ID: A7-45833-369
Engine type: two-stroke, air-cooled, blade direction of rotation: left, oil/petrol mixture ratio: 1:25, disc cutting width: 255 mm, wire cutting width: 410 mm, maximum rpm: 8000 rpm, engine displacement: 42.7 cm³, fuel tank volume: 1000 ml, carburetor: diaphragm, guaranteed sound intensity level: 110 dB, Start: manual, never used Overall dimensions: 1200 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-45834-363
This 3-axis MicroStep 3001.15P/ME plasma cutting machine was manufactured in 2021. It features a working area of 1500x3000mm, ideal for precise and large-scale cutting tasks. If you are looking to get high-quality cutting capabilities, consider the MicroStep 3001.15P/ME machine we have for sale. Contact us for more information.
maximum number of results exceeded
please refine your search
210 € 
