laser cut used for sale

Inv. Num: 5422 Type: ML3015eX PLUS Producer: Mitsubishi Generated: 2017 Parameters: Control system: MITSUBISHI M 700 Engine hours: 21480 h Spindle hours: 1480 h Laser power: 4.5 kW Maximum table load (even): 930 kg Feed length X-axis: 3100 mm Feed length Y-axis: 1565 mm Feed length Z-axis: 150 mm Machine length: 10210 mm Machine width: 3130 mm Machine Weight: 10700 kg

ERMAKSAN LASERMAK 6000 6X2 laser cutter was produced in 2014. Technical parameters: – laser source: 6000 W CO2-laser GE Fanuc C6000i-Model C – RF-excitation: 2 MHz – power stability: ± 2% (power monitor) – laser wave length: 10.6 μM – beam mode: Fanuc Low Order Mode – laser shutter: mechanical safety shutter – laser gas composition: CO2 / He / N2 – gas consumption by laser: 20 l / h – cooling water flow rate: 250 l / min – maximum cutting capacity: mild steel 25 mm (during tests the maximum achieved: 30 mm), stainless steel 15 mm, aluminum 12 mm - machine activation time: 22899 h - working time: 10122 h - cutting time: 8429 h – total energy requirement: 100-120 kW – cutting head focal length: 5 -7” -10 inch – maximum worksheet size: 6150 x 2000 mm – maximum burden capacity: 4000 kg – machine axes: 5 axes [X, Y, Z, U (X2), V] – axis ...

- High speed X and Y linear motors. - Automatic nozzle change. - Head with a single lens. - Laser Type: CO2 - Working area (X x Y x Z): 3.050 x 1.600 x 150 mm - Max. workpiece weight: 900 kg - Positioning speed X/Y: 170 m/min - Simultaneous positioning speed: 240 X+Y m/min - Laser Output: 5 kW - Maximum material thickness mild steel: 25 mm - Maximum material thickness stainless steel: 20 mm - Maximum material thickness aluminium: 12 mm - Control: PRIMACH-30L Controller - Machine ON Working hours: 14.738 h - Beam ON Working hours: 6.500 h - Power: installed max: 90 kW - Dimensions (long x wide x high): 9.700 x 3.600 x 2.600 mm - Weight: 15.000 kg

The PRIMA POWER PLATINO 1530 laser was produced in 2012 by the Italian company Prima Power. Technical parameters: – machine time worked: 24800 hours – power: 2500.0 W – CNC control: Primach 20L – X travel: 3000.0 mm – Y travel: 1500.0 mm – working area: 3000 x 1500 mm – maximum sheet length: 3000.0 mm – maximum sheet width: 1500.0 mm – maximum sheet thickness: 15.0 mm – maximum load on the table: 250.0 kg – machine length x width x height: 12000.0 mm × 6000.0 mm × 3000.0 mm – machine weight: 12000.0 kg Rofin Sinar DC 025 CO2 laser specification – type: CO₂ – laser: Rofin Sinar DC 025 – power: 2,500 Watt – power stability: + -2% FS – wavelength: 10.6 µm – gas type: He 67.7%; CO2 4.1%; N2 28.2% – beam propagation factor M2: 250 microseconds, 70 used resolutions – positioning accuracy: + -150 radians – operating condi ...

TRUMPF TruLaser 5030 Year of prod. 2007. Operational hours laser beam: about 22500 h Operational hours / machine on: about 60000 h Technical condition: good+. Machine under constant service care, all spare parts replaced on time. Recently replaced laser mirrors. The machine is still in production. Control: Siemens 840D Laser power: 5 kW. Maintenance-free turbine TruFlow 5000 Working range: 3000 x 1500 x 115 mm Quality sheet cutting: - black steel up to 25mm - stainless steel up to 20mm - aluminum up to 12mm Equipment: - precise sheet metal burning system - linear drives - conveyor for removing small details and sheet metal remnants - lighting of the working space - positioning laser diode - oil mist spraying - PierceLine system: the function of quick burning into the material, adjusting the laser power to the material being processed. Up to 90% shorter piercing time!  ...

1300 x 3000mm 2000w Automatic Loading & Unloading Siemens 840

Used machine in good condition. Available for immediate delivery. - Working area (X x Y x Z): 2.500 x 1.250 x 115 mm - Laser Type: CO2 - Positioning speed X/Y: 60 m/min - Simultaneous positioning speed: 85 X+Y m/min - Laser Output: 1,8 kW - Maximum material thickness mild steel: 12 mm - Maximum material thickness stainless steel: 4 mm - Maximum material thickness aluminium: 3 mm - Control: SINUMERIK 840 D - Consumption values CO2: 1 l/h - Consumption values N2: 6 l/h - Consumption values He: 13 l/h - Machine ON Working hours: 43.950 h - Beam ON Working hours: 23.696 h - Weight: 7.900 kg - Dimensions (long x wide x high): 7.100 x 5.900 x 2.000 mm

Table size : 3000 mm x 1500 mm Power : 3.5 KW Fanuc resenator Machine is in good condition

CNC Lazer TruLaser 3030 Table size : 3000 mm x 1500 mm Maximum load capacity : 900 kg Power : 4000 W Maximum thickness : 20 mm Machine is in very good condition

Co2 laser cutter year 2001 currently working, includes automatic charger.

100 W laser and filter for fume extraction, both the laser and the filter worked only for a few hours, purchased new in March 2023, the laser worktop is 110 × 70 CM, complete with PC and bench.

Power : 4 KW All maintenance has been done regularly DC040 Rofin resonator

LVD IMPULS 6020 laser cutting machine PULSE LVD 6020 laser cutter

3000 mm x 1500 mm Power : 4.4 Kw Maximum thickness : 25 mm Machine is in good condition

2000 Watt Year 1998 with chiller, dust extractor, transformer and all documentation with new turbine and service check

Wuhan Tianqi YAG620-GC3015 laser cutting machine 2014

6000 mm x 2000 mm Power : 4 Kw Working hours : 35000 Machine is in good condition

lenght: 3000 mm Power: 4400 W Metal width: 1500 mm Type: CO2 CNC: yes CNC type: Bystronic Travel x,y,z: 3000x1500x100 mm Option to cut tubes: no

Bystronic Bysprint 3015 Laser Cutting Machine Machine is in good working condition It has been installed end of 2015!

Ermak EFB 3000 6x2 Laser Cutting Machine Table size : 2000 mm x 6000 mm Power : 3000 W Mechanic table Chiller : IPHC Resonator : IPHC Machine is in good condition

Trumpf TruLaser 3530 Laser Cutting Machine power 4000 W capacity 1500x3000 in active use Maintenance done on time

Machine type: CNC laser Manufacturer, model: Prima Power, Rapido 5 Origin: Italy Control: Primach 9000L Table: 3000 x 1500mm

Trumpf Trulaser 3530 laser cutting machine 3000 mm x 1500 mm Power : 4 KW Machine is in good condition

Metal length : 3000 mm Metal width : 1500 mm 4 KW Double pallet Max thickness : 0.15 - 25 mm Black 0.10 - 12 mm Stainless Steel 0.30 - 8 mm Aluminum 0.30 - 5 mm Galvanized

All maintenance has been done by Trumpf service Machine can be seen in working condition

Durma HD-FL 3015 2 KW Laser Cutting Machine All maintenance has been done recently Machine is in very good condition

Version with LIFTMASTER for loading and unloading parts and automatic cross receiver of small parts. Working area 3000x1500 mm. Machine regularly serviced.

Durma HD-F 3015 4 KW Laser Cutting Machine IPG resonator YLS-4000 Machine is like new condition

Manufacturer: Trumpf Model: Trumatic L 6030 Year of manufacture: 2004 Power: 4 kW Laser: TLF 4000t Table: 6000 x 2000 mm with Rotolab CE Norms

Ermak SM6000 Laser Cutting Machine All maintenance has been done Machine is in very good condition

Bystronic BySprint Fiber 3015 Fiber Laser Cutting Machine Power : 6000 W 3000 mm x 1500 mm Powercut Cutting hour: 32913(April 2023) Serviced by authorized service

Cutting power : 2 Kw Working hours : 29.221 Table size : 4000 mm x 2000 mm Siemens control unit Moving Double Table Cutting with Nitrogen or Oxygen

Durma HD-F 3015 4KW Laser Cutting Machine IPG Power Source Double table

-resonator power: 4,4 kW -processing range: 3000x1500 mm -maximum cutting thickness, black steel: 20 mm -maximum cutting thickness, stainless steel: 10 mm -maximum cutting thickness, aluminium: 8 mm -3 heads

Durma HD 4020 6 KW Laser Fiber Cutting Machine 4000 mm x 2000 mm Machine is in very good condition

Prima Power 5 Kw laser cutting machine 5 Kw 3000 mm x 1500 mm Machine is in good condition

Resonator operation time: 59000 Cutting time: 41000 Cutting stainless steel up to 12mm Cutting structural steel up to 20mm Aluminum cutting up to 8mm.

Amada Laser 2415 AC with automatic loading/unloading Power : 2kW - 43 kWA Metal size : 1500 x 3000 mm

Trumpf L 3030 Trumatic laser cutting machine metal dimensions: 3000 mm x 1500 mm Power : 2000 W Machine is in good condition

Cutting table : 3000 mm x 1500 mm Precitec cutting head 2000 W 2 x automatic tables

2010 model condition is very good, all maintenance has been done, very clean machine

Bystronic Bysprint Pro 6000 W CO2 Laser Cutting Machine Table size : 4000 mm x 2000 mm 6000w Carbon laser Automatic centering station Maintenance has been done by Bystronic Work on time : 24805(June 2023)

Durma HD-F 4020 Laser Cutting Machine Power : 6000 W 4000 mm x 2000 mm All maintenance has been done by Durmazlar Only air cut has been done(no oxygen or any other cutting done) Machine has been cut maximum 1.5 mm

Bystronic Bysprint Pro 3015 CO2 Laser Cutting Machine 3000 mm x 1500 mm Regular service check by Bystronic

Power : 5000 W 3000 mm x 1500 mm Machine can be seen in working condition

Mazak Optiplex Nexus 3015 Fiber Laser Cutting Machine 3000 mm x 1500 mm Power : 4000 W Machine is in excellent condition

2500 mm x 1250 mm Power : 1.8 kw Maximum thickness for stainless steel : 6 mm

Prima Industrie Platino 1530 laser cutting machine Used machine visible in Italy, sold as it is

Table size : 3000 mm x 1500 mm Power : 6000 W Working hours : 52000 Machine is in good condition

Ermak MOMENTUM G-5 G FORCE 6 KW Laser Cutting Machine Double table: 1500 mm x 3000 mm Power: 6000 watt Resonator: IPG