We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,195 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Alpha AL 120 Laser Welding Machine Laser Power : 120W Machine is in good working condition
used
Ermak Fibermak Momentum Gen-3 4 KW Fiber Laser Cutting Machine 6000 mm x 2000 mm Machine is in very good condition All maintenance has been done regularly
used
Clean, carefully operated Bystar 1 with U-axis and moving cutting roosts Laser cutting machine
used
Cell with welding laser E-TECH TRUMPF TLF4000 Year of construction: 2005 Laser: TLF 4000 Rok produkcji: 2005 Laser: TLF 4000 Receiving robot : Yaskawa Motoman NX100
used
Manufacturer: Scansonic Type: AL01 Condition: refurbished, since then unused and professionally stored in the manufacturer's suitcase Wavelengths: 900 ... 1030 nm; 1064 nm, 1080 nm to 4 kW Illustrations: 2.0:1 - 2.5:1 - 3.2:1 - 4.0:1 - 5.3:1 Fiber plug: Trumpf B or Type D (LLK Auto) Laser: CW laser up to 4 kW Working range height (Z): ± 5 mm Robot adaptation: any Repaired/replaced: - Lens - Compression spring - Protective spring - Cover - Beam aperture - Shaft spring - Fiber coupling firing In addition, the device was cleaned, adjusted and force-normalized.
used
Ermak FIBERMAK Momentum GEN-3 6 Kw Fiber Laser Cutting Machine Lantek and UPS are included Machine is in very good condition
used
Trumpf Lasercell 7040 laser cutting machine / 5-axis, Year of construction 2008, Control Siemens 840 D, Laser power 6 KW, Table length 4000 mm Table width 1500 mm Burner Heads 1 max. cutting capacity sheet metal 20 mm, max. cutting capacity VA 20 mm, max. cutting capacity AL 15 mm, Enclosed engine room Laser TruFlow 6000 Htzhtpszv ADC Cutting Head Positioning Laser Diode Suspended control panel stationary, rotatable Teachpanel Magnetic coupling, head detection Laser Power Control Performance Cycles Laser welding Total power requirement kW Speed 10 m/min Machine weight approx. 19 t Space requirement approx. 9.5 x 7.3 x 3.1 m
used
TRUMPF TruLaser Cell 7040 3D laser built in 2015 in Germany is the ideal solution for versatile cutting, welding and laser metal deposition (LMD). For all these tasks, the TRUMPF 3D laser cutting machine uses the TruDisk 4001 semiconductor laser and a specially designed 3D head with 5 axes, which can machine not only flat workpieces, but also tubes, closed profiles and very complex shapes. All of this makes this extremely technically advanced machine capable of tackling any challenge in the broad field of automotive engineering. The workpiece placed on one of two work tables is machined by an extremely stable laser beam with a power of up to 4 kW. During machining, the head moves in the three-dimensional cartesian coordinate system and rotates in two axes in the polar coordinate system. This is what gives the universal 3D laser its extraordinary quality and precision, impossible to ac ...
used
This TRUMPF TruLaser Laser Welding machine was manufactured in the year 2007 in Germany and has 28200 production hours. It is equipped with a KR C2 control unit. The machine has a laser power of 4 kW.
used
This TROTEC Speedmarker 700 SM700HT FIBER Laser Marking was manufactured in the year 2021 in Germany. The machine has not been used apart from the instruction and is like new. It is equipped with a fiber laser and can operate with a max. load of 1.5 kg.
used
Description: Construction site laser level, with case Approx. Onsite Dimension. (l x w x h): 250 x 250 x 250 mm, weight approx.: 2 kg
used
Description: Construction site laser level, with case Approx. Onsite Dimension. (l x w x h): 250 x 250 x 250 mm, weight approx.: 2 kg
used
Description: Construction site laser level, with case Approx. Onsite Dimension. (l x w x h): 250 x 250 x 250 mm, weight approx.: 2 kg
new
Laser heater Qlima SRE 8040 TC silver Only 8 pcs available Stock clearance This powerful SRE 8040 TC laser heater brings a lot of heat into your home. The integrated digital display makes it easy to select the desired temperature or function. The built-in thermostat adjusts the power according to the set temperature. In addition, the SRE 8040 TC is equipped with most standard functionalities such as a day timer and fuzzy logic. Thanks to the "Fuzzy Logic" of the Qlima SRE 8040 TC, the room has the preset temperature at the desired time. This laser emitter is also equipped with an automatic burn time extension. When the fuel runs low, the device automatically switches to a lower combustion level, so that the refilling of the fuel is postponed for some time. The lasers from Qlima, full of technical ingenuity! The heater comes with a handy fuel siphon pump. Fuel When choos ...
used
Description: Voltage 3 V DC, wavelength 650 nm Approx. Onsite Dimension. (l x w x h): 530 x 300 x 100 mm, weight approx.: 2 kg
used
Description: Voltage 3 V DC, wavelength 650 nm Approx. Onsite Dimension. (l x w x h): 530 x 300 x 100 mm, weight approx.: 2 kg
used
Description: Construction site laser level, with case Approx. Onsite Dimension. (l x w x h): 250 x 250 x 250 mm, weight approx.: 2 kg
used
Description: Construction site laser level, with case Approx. Onsite Dimension. (l x w x h): 250 x 250 x 250 mm, weight approx.: 2 kg
used
Description: Construction site laser level, with case Approx. Onsite Dimension. (l x w x h): 250 x 250 x 250 mm, weight approx.: 2 kg
used
Max. Sheet thickness: 8mm, max. cutting force: 220kN, laser power: 2700W, C-axis punching: 330rpm, max. stroke rate marking: 2800rpm. Tool rotation: 360°, punching tool size: 76.2mm, max. tool change time: 0.3s, punching/laser part flap size: 500mm x 500mm. Documentation available.
used
There are two identical lasers LASAG AG OS SLAB, pulse duration: 0.1-0.5ms, wavelength: 1064nm, max. laser radiation: 1mW, year of construction laser 1/ 2: 2002/ 2003.
used
Operational hours counter heating: 23,002h, with controls cabinet and documentation.
used
Professional version, laser power: 1500W, integrated pilot laser, wavelength (nm): 1075 ± 5, programmable slots: 9, W-LAN. The condition is as good as new.
used
X-travel: 800mm, y-travel: 500mm, z-travel: 400mm, working height: 980mm, turntable diameter: 900mm, connected load: 12.5kW, control: Siemens Sinumerik 840D, length: 2710mm, width: 1815mm, height: 2645mm, weight: 1.86t, weight control cabinet: 300kg, with documentation, an on-site inspection is possible.
used
X-travel: 500mm, y-travel: 430mm, z-travel: 350mm.
MAX. OUTER TUBE DIA. 85 MM
used
Connected load: 6.5kW.
used
Wavelength: 1064nm, max. pulse power: 200kW, max. pulse repetition frequency: 60kHz, connected load: 2kW, with documentation, on-site inspection is possible.
used
Code reader: SIEMENS MOBY E with profibus connection to the PLC for reading the code on the pallet. Trumpf TruMark: ? Most standard Trumpf marking laser Type: TRUMARK 3020, 1064nm ? Active air cooling (can be used up to 40?C) ? The code to be written is a 6 digit numeric code. The number of this code is written digitally 1 time and encoded 5 times 2D matrix on the circumference of approx. 70mm of the disc. The code itself is transmitted by the PLC to the laser ? 2D code height = approx. 8 by 8 mm
used
Code reader: SIEMENS MOBY E with profibus connection to the PLC for reading the code on the pallet. Trumpf TruMark: ? Most standard Trumpf marking laser Type: TRUMARK 3020, 1064nm ? Active air cooling (can be used up to 40?C) ? The code to be written is a 6 digit numeric code. The number of this code is written digitally 1 time and encoded 5 times 2D matrix on the circumference of approx. 70mm of the disc. The code itself is transmitted by the PLC to the laser ? 2D code height = approx. 8 by 8 mm
used
Code reader: SIEMENS MOBY E with profibus connection to the PLC for reading the code on the pallet. Trumpf TruMark: ? Most standard Trumpf marking laser Type: TRUMARK 3020, 1064nm ? Active air cooling (can be used up to 40?C) ? The code to be written is a 6 digit numeric code. The number of this code is written digitally 1 time and encoded 5 times 2D matrix on the circumference of approx. 70mm of the disc. The code itself is transmitted by the PLC to the laser ? 2D code height = approx. 8 by 8 mm
used
Code reader: SIEMENS MOBY E with profibus connection to the PLC for reading the code on the pallet. Trumpf TruMark: ? Most standard Trumpf marking laser Type: TRUMARK 3020, 1064nm ? Active air cooling (can be used up to 40?C) ? The code to be written is a 6 digit numeric code. The number of this code is written digitally 1 time and encoded 5 times 2D matrix on the circumference of approx. 70mm of the disc. The code itself is transmitted by the PLC to the laser ? 2D code height = approx. 8 by 8 mm
used
Code reader: SIEMENS MOBY E with profibus connection to the PLC for reading the code on the pallet. Trumpf TruMark: ? Most standard Trumpf marking laser Type: TRUMARK 3020, 1064nm ? Active air cooling (can be used up to 40?C) ? The code to be written is a 6 digit numeric code. The number of this code is written digitally 1 time and encoded 5 times 2D matrix on the circumference of approx. 70mm of the disc. The code itself is transmitted by the PLC to the laser ? 2D code height = approx. 8 by 8 mm
used
Code reader: SIEMENS MOBY E with profibus connection to the PLC for reading the code on the pallet. Trumpf TruMark: ? Most standard Trumpf marking laser Type: TRUMARK 3020, 1064nm ? Active air cooling (can be used up to 40?C) ? The code to be written is a 6 digit numeric code. The number of this code is written digitally 1 time and encoded 5 times 2D matrix on the circumference of approx. 70mm of the disc. The code itself is transmitted by the PLC to the laser ? 2D code height = approx. 8 by 8 mm
used
Code reader: SIEMENS MOBY E with profibus connection to the PLC for reading the code on the pallet. Trumpf TruMark: ? Most standard Trumpf marking laser Type: TRUMARK 3020, 1064nm ? Active air cooling (can be used up to 40?C) ? The code to be written is a 6 digit numeric code. The number of this code is written digitally 1 time and encoded 5 times 2D matrix on the circumference of approx. 70mm of the disc. The code itself is transmitted by the PLC to the laser ? 2D code height = approx. 8 by 8 mm
used
Resolution: 600x2400dpi, printing length/ width: 40-210/ 279-914mm, length: 790mm, width: 1376mm, height: 1450mm, weight: 540kg, mileage: ca. 120.000 linear meter, with Cutting Machine KIP Cut-Inline-XY Cutter.
new
With the Xpress you get a reliable and easy-to-use product with the laser software MARKER, which is adapted to your individual requirements and can be used in numerous areas of engraving, tempering marking, depth marking and plastic marking. Convince yourself of our Xpress: Make an appointment with us and bring samples of your materials to be processed. We would be happy to introduce you to our Xpress. Laser safety goggles are required for this system. We offer these for spectacle wearers and non-spectacle wearers. Laptop/PC customer provision!
new
Laser lamp QCW245 incl. sealing rings MA-102181 larger quantities on request
used
used
Kolltronic F30 fibre laser Marking laser Kolltronic marking software laser power 30 Watt 1 lens with 100x100mm laser area 1 lens with 150x150mm laser area Cabinet with air conditioning Rittal, workshop suitable Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com subject to sale and mistakes
new
Replacement fiber laser module IPG 30 Watt for FOBA labeler DP30F Model: YLP-V2-1-100-30-30 also available in 10 and 20 watts Fiber length 3 m, interface E Adapter for interface B1 in stock MA-107437 o. Target Laser Delivery: EXW, collection possible VAT will be shown
new
Ref.-No. 10009-20-1276 Table Laser Designation of the attachment marking laser SAL 22 Manufacturer SH-Made in Germany Model SAL22 Year of construction NEW Compact ALL-in-One table machine for laser processing • Fiber laser 20W (Optional: 30W, 50W) • Laser class 1 • Wavelength 1064nm • Marking field size 110x110 mm • Marking software EZCAD in German / English • Pilot laser (easy preview) • Focus finder (easy focus adjustment) • max. component height approx. 300 mm • marking height approx. 110 mm • Working range approx. 390x240mm • Welded construction made of sheet steel • Connection 230V • Air-cooled • Notebook with cable, Windows 10 (German or English) • Dimensions: 670x 430x 700 mm (LxWxH) • Weight: approx. 55 Kg
new
Ref.-No. 10010-21-1339 Portable Laser Name of the system Compact ALL-in-one system component for laser processing Portable Marking Laser Manufacturer SH-Germany Model SAL 23 Year of construction NEW Compact ALL-in-one system component for laser processing • Fiber laser 20W (Optional: 30W, 50W) • Laser class 4 • Wavelength 1064nm • Marking field size 110x110mm • Marking software EZCAD • Electrically adjustable Z-axis (working plane adjustment) • Welded construction made of sheet steel • Connection 230V • Air-cooled • Touch IPC with Windows 10 operating system • Keyboard • Dimensions: 1150 x 500x 1500mm (DxWxH) • Weight: approx. 85 Kg • Weight of the portable laser unit 6.8 Kg • Smoke extraction included
new
Ref.-No. 10013-21-1337 Marking laser SAL 27 Name of the attachment marking laser SAL 27 Manufacturer S-Germany Model SAL 27 Year of construction of new goods The SAL 27 in a flexible allroud talent. Thanks to the three different, manually adjustable axes, inscriptions from small to very large parts up to a height of over one meter can be easily realized. With the swivel axis, the laser head can be positioned in the most difficult places. The SAL 27 is mobile and can be easily rolled onto the workpiece. Product • Fiber laser 30W (optional 50W) • Laser class 4 • Wavelength 1064nm • Marking field size standard 110 x 110mm (optional 150 x 150mm) • Y-axis from 1020 - 1320mm, travel max. component height 1120mm X-axis approx. 250mm travel • Pilot laser (easy preview) • Focus finder (easy focus adjustment) • manually adjustable Z-axis • Touch PC with la ...
new
Ref.-No. 10014 / No. 21-1560 SAL 28 Description Marking Laser SAL 28 Manufacturer SH-Germany Model SAL 28 Year of construction NEW Dear Sir or Madam, We hereby offer you, in accordance with our technical specification, on the basis of the generally applicable Terms of delivery and payment (VDW 502), hereinafter to: Product • Fiber laser 20W (optional: 30W, 50W) • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm • Marking software EZCAD in German / English • Pilot laser (easy preview) • Focus finder (easy focus adjustment) • max. component height approx. 300mm • Electrically adjustable Z-axis • Laptop incl. holder with operating system Windows 10 • Aluminium profile frame • Air-cooled • Door width approx. 520mm / door height: 400mm • Connection 230V • Dimensions: approx. 800 x 600 x1660 mm (LxWxH) • We ...
Ref.-No. 10017 – No. 21-1417 Described Open Laser System Manufacturer SH-Germany Type LAS 26 Year of construction New LAS 26 The LAS 26 is an open laser system with which small parts and also large, bulky parts can be lasered. Due to the lack of limitation of an enclosure, the dimensions of the workpiece are variable. It is possible to integrate this laser system into an existing system. Product • Fiber laser 20 W (optional: 30 W, 50 W) • Laser class 4 • Marking field size 150 x150 mm • Marking software EZCAD • Pilot laser (easy preview) • Focus finder (easy focus adjustment) • Marking height approx. 330 mm • Electrically adjustable Z-axis (Working Plane setting) • Connection 230 V • Air-cooled • Laptop with Win 10 • Dimensions: approx. 840 x 775 x 700 mm (L x W x H) • Weight: approx. 45 kg
Ref.-No. 10017 – No. 21-1417 Described Open Laser System Manufacturer SH-Germany Type LAS 26 Year of construction New LAS 26 The LAS 26 is an open laser system with which small parts and also large, bulky parts can be lasered. Due to the lack of limitation of an enclosure, the dimensions of the workpiece are variable. It is possible to integrate this laser system into an existing system. Product • Fiber laser 20 W (optional: 30 W, 50 W) • Laser class 4 • Marking field size 150 x150 mm • Marking software EZCAD • Pilot laser (easy preview) • Focus finder (easy focus adjustment) • Marking height approx. 330 mm • Electrically adjustable Z-axis (Working Plane setting) • Connection 230 V • Air-cooled • Laptop with Win 10 • Dimensions: approx. 840 x 775 x 700 mm (L x W x H) • Weight: approx. 45 kg
Ref.-No. 10017 – No. 21-1417 Described Open Laser System Manufacturer SH-Germany Type LAS 26 Year of construction New LAS 26 The LAS 26 is an open laser system with which small parts and also large, bulky parts can be lasered. Due to the lack of limitation of an enclosure, the dimensions of the workpiece are variable. It is possible to integrate this laser system into an existing system. Product • Fiber laser 20 W (optional: 30 W, 50 W) • Laser class 4 • Marking field size 150 x150 mm • Marking software EZCAD • Pilot laser (easy preview) • Focus finder (easy focus adjustment) • Marking height approx. 330 mm • Electrically adjustable Z-axis (Working Plane setting) • Connection 230 V • Air-cooled • Laptop with Win 10 • Dimensions: approx. 840 x 775 x 700 mm (L x W x H) • Weight: approx. 45 kg
Ref.-No. 10017 – No. 21-1417 Described Open Laser System Manufacturer SH-Germany Type LAS 26 Year of construction New LAS 26 The LAS 26 is an open laser system with which small parts and also large, bulky parts can be lasered. Due to the lack of limitation of an enclosure, the dimensions of the workpiece are variable. It is possible to integrate this laser system into an existing system. Product • Fiber laser 20 W (optional: 30 W, 50 W) • Laser class 4 • Marking field size 150 x150 mm • Marking software EZCAD • Pilot laser (easy preview) • Focus finder (easy focus adjustment) • Marking height approx. 330 mm • Electrically adjustable Z-axis (Working Plane setting) • Connection 230 V • Air-cooled • Laptop with Win 10 • Dimensions: approx. 840 x 775 x 700 mm (L x W x H) • Weight: approx. 45 kg
new
Ref.-No. 10017 – No. 21-1417 Described Open Laser System Manufacturer SH-Germany Type LAS 26 Year of construction New LAS 26 The LAS 26 is an open laser system with which small parts and also large, bulky parts can be lasered. Due to the lack of limitation of an enclosure, the dimensions of the workpiece are variable. It is possible to integrate this laser system into an existing system. Product • Fiber laser 20 W (optional: 30 W, 50 W) • Laser class 4 • Marking field size 150 x150 mm • Marking software EZCAD • Pilot laser (easy preview) • Focus finder (easy focus adjustment) • Marking height approx. 330 mm • Electrically adjustable Z-axis (Working Plane setting) • Connection 230 V • Air-cooled • Laptop with Win 10 • Dimensions: approx. 840 x 775 x 700 mm (L x W x H) • Weight: approx. 45 kg