128,878 used machines on RESALE, but how to find them? Machine Search
Maximum plate format 1600 x 2083 mm, Z-Speed laser head approx. 2500 hours, plate throughput 52 pieces/hour (70/100 format) and 28 pieces/hour in VLF format, including multiple cassette autoloader and other accessories, good condition, maintenance contract maintained, Available immediately Price from location on request
3 x stainless steel gastro containers LxWxH: 53x32x20 Total price
Large-capacity system for climate testing with S! MCON Control Construction The system consists of the following main assemblies: - Walk-in, isolated test room - Air treatment room - Machine unit - Air conditioning system -Switchboard Test room The internals in the test room are made of corrosion-resistant material The test room can be illuminated, is accessible and has a condensate water and cleaning drain. Air treatment room The air treatment room is located behind the air deflector in the insulated interior. It contains the following assemblies necessary for temperature control and is accessible through easily removable plates. - Test room fans -Heat exchanger - Electric radiators - Ventilation device - Temperature probes In the air treatment room, the air is tempered (cooled/heated), humidified and dehumidified and circulated by fans. The air is sucked ...
Kodak Trndsetter Q800 with developer year 2016. Model TJ1903 developer EL125T In production X speed, 42 plates per hour software
Replacement tooth suitable for Hammer RH25 demolition pulverizer
KODAK Magnus VLF MTA Large Format Thermal Platesetter with MCU Multi-Cassette Unit (Four Cassettes) New TH 7 laser (May 2022) with only 1296 laser hours 2400 dpi Z-Speed Panel counter: 258861 Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from right to left with Prinergy TIFF Shooter Dell PowerEdge 7330 Plate development machine built in 206 Year of Make: 2006
KODAK Magnus VLF MTA Large Format Thermal Platesetter with MCU Multi-Cassette Unit (Four Cassettes) New TH 7 laser (08/2022) with only 2615 laser hours 2400 dpi Z-Speed Panel counter: 395443 Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from left to right with Prinergy TIFF Shooter Year of Make: 2016 New TH 7 laser (08/2022) with only 2615 laser hours
used
- Maximum panel format 2080 x 1600 mm, min. plate format 655 x 410 mm - 128 laser diodes, blue laser 405nm for UV light sensitive analog standard plates - Resolution 2,400 dpi - Optionally with automatic plate feeder PHS system with 5 cassettes at call Price from location on request
used
up to maximum panel format 1397 x 1778 mm, with automatic pallet loader Immediately available, price on request
used
incl. inline punch, automatic pallet loader with 2 segments, under full maintenance contract Coming soon, price on request
It is basically a Zeiss SEM with a water-cooled column (LEO S420), tungsten cathode and has the following detectors/equipment: SE Detector RE Detector EDX detector Noran System 7 from Thermo Fisher And another for work at low pressure, even for poorly conductive samples. Vacuum-resistant live camera Chamber size Inner dimensions: D152 x W112 x H141cm³ Condition cathode Well, there are still several tungsten filaments available. Vacuum system: Pfeiffer DUO65 rotary vane pump, roots pump + large, magnetically mounted Pfeiffer turbopump
Magazine drawer cabinet HAHN+KOLB with large quantity of drills, approx. 100x105x80t cm, 11 drawers, well filled, partly with drills and milling cutters
Mostly equipped with tools With lattice box Auction-ID: A1-44728-34
Product presentation structure for large household appliances approx. 400x150x110cm (WxDxH), wood décor Sonoma oak, grey above contrasting, electrification, 3 pieces, without sales goods
LG sales island for large TV sets approx. 400x170x150cm (WxDxH), wood, white décor, fronts partly black, with superstructure, advertising, electrification and backlight, for approx. 6 large-screen TVs, without TVs
Product presentation structure for large household appliances approx. 400x150x110cm (WxDxH), wood décor Sonoma oak, set off in grey above, electrification, 3 pieces, side boundary only on one side (stands in the pallet rack
Product presentation structure for large household appliances approx. 600x150x110cm (WxDxH), wood décor Sonoma oak, contrasting grey above, electrification, without sales goods
Product presentation shelves for large kitchen appliances double-sided approx. 600x1300x100cm (WxDxH), wood décor grey, white inside, for 2x 9 appliances
Product presentation shelves for large kitchen appliances double-sided approx. 600x1300x100cm (WxDxH), wood décor grey, white inside, for 2x 9 appliances, with structure for hobs
LIEBHERR sales wall for large refrigerators approx. 170x60x250cm (WxDxH), wood décor grey, inside white with lighting and advertising
Large slewing bearings, slewing ring, single-row ball slewing ring, four-point bearing -comes from: HUSS Rides, manufacturer of leisure facilities -Replacement part: from Top Junior 70011-15 -Manufacturer: Rothe Erde -Type: 2-060-40-0490-001 63132-609 -Type: 2.060.40.0490.001 63132.609 -Outer diameter: 625 mm -Inner diameter: 354 mm -Height: 90 mm -Quantity: 3x available in storage -Price: per piece -Weight: 122 kg
Attachment holders, standard holders and accessories, spiral drill bits, BILZ spiral drill bits, reaming bits, BILZ reamers, BILZ holders, tool holders, drill bit mounts, twist drills -Mounted tool holder: 8 pieces -Recordings: MK5, MK4, MK3 -Spiral drill bits: 35 pieces -Sizes: Ø38 mm - Ø95 mm -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 550/300/H70 mm -Weight: 28 kg
This compact sweeper is ideal for your work floor or outdoor area. The 2 brushes on both sides with a working width of 1000mm allow you to sweep a lot at the same time, also in combination with the rollers at the bottom of the machine and the large collection tray provides a lot of convenience in cleaning your floors. Unused in box. Auction-ID: A1-40237-68
PANEL Detail: 280x240 (105 pcs / 705.6 m²), 280x120 (55 pcs / 184.8 m²), 280x090 (12 pcs / 30.24 m²), 280x060 (43 pcs / 72.24 m²) ANGLE 280 detail: INT 280 (11 pcs / 70,224 m²), 12+12 sail 18 (2 pcs / 1,344 m²), 14+14 sail 20 (9 pcs / 7,056 m²) Detail EXTENSION 50: 50x240 (16 pcs / 19.2 m²), 50x120 (21 pcs / 12.6 m²) ANGLE 50 detail: INT 50 (7 pcs / 7.98 m²) Total = 1111 m2 approximately Auction-ID: A1-44895-37
Hello, We hereby offer you new, originally-packaged Philips LED lamps of the type BVP130 LED210-4S/740 PSU S ALU C1KC3 from the CoreLine Tempo Large product family. Here are some technical data: Manufacturer: Philips CoreLine Tempo Large product family Type BVP130 LED210-4S/740 PSU S ALU C1KC3 System luminous flux 21,000 lm Nominal luminous efficacy 130 lm/W System power 164 W Light colour 740 neutral white Colour temperature 4000 K Optics Type: Symmetrical Beam angle 70° x 21° Input voltage 220 to 240 V Input frequency 50 to 60 Hz Inrush current 58 A Dimensions: 389 x 486 x 40 mm (W x H x D) Weight approx. 7.5 kg IP66 degree of protection For further technical data, please refer to the manufacturer's pdf product data sheet and pdf assembly instructions, which are available for download. Areas of application, lighting of: public facilities, sports facilit ...
GNB battery with automatic filling, blue spot, flash light, width lighting, roof with panzer glass Auction-ID: A3-43506-211
170 new parts Viega Prestabo Unused Auction-ID: A7-45427-18
Unaudited Auction-ID: A7-45427-179
Large batch of kitchen utensils, GN containers + strainers in various sizes, induction plates, bowls, pots, pans, knife sharpeners, kettles, sieves, blenders, ladles, etc. Auction-ID: A7-45677-65
Large batch Deli Special Coffee Mug / 3 pallets, approx. 65 cartons a = 2000 pieces, total volume 3 pallets Auction-ID: A7-45677-75
Battery with automatic filling, blue spot, large full rubber wheels Auction-ID: A3-43511-226
Complete contents of space (except chemicals) consisting of, among other things, shelving units, decorative equipment, office inventory, chairs, cabinets, white goods, lighting, tables, picture frames, skirting boards, stained glass, advertising material, car seats, wood, stainless steel worktop, advertising boards, construction vacuum cleaner, floor cleaning, doors Auction-ID: A1-40104-136
L + Z lathe HOLZMANN type ED 914GNMasch. No. 20265 Year of construction 2006Center width 800 mmTurning diameter over bed 300 mmCenter height over bed 150 mmTurning diameter over support 190 mmCenter height over support 95 mmSpindle bore 38 mmSpindle speed 70 - 1400 rpm. 9 stepsFeed longitudinal and flatChuck flange Short taper DIN 55029 D1-4 Camlock 63 mmTailstock inner taper MK 3Drive power 1.5 kWNet connection 400 volts, 50 Hz- Spindle speed over 9 gear stages - 4-jaws
Technical data: Completely overhauled in 2001 Circulation diameter over bed: 1000 mm Diameter in recess: 1120 mm Circulation diameter over bed slide: 690 mm max. height above floor: 1110 mm max. height above bed: 460 mm Bed width: 800 mm Width of recess in front of the plan disc: 550 mm
Tip height: 330 mm centre distance: 1500 mm circular diameter: bed 690 mm spindle bore: 82 mm spindle retainer: short taper size 8 taper tailstock: 6 MK spindle speed: 7.1-1400 rpm feeds: longitudinal/plan 0.05 112/0.025 56 mm / U thread pitches: 0.25-560 mm electrical connection: 380 V, 15 kW space: 3350 x 1800 x 1400 mm weight: 4800 kg
Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe
Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...
Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable ...
Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...
Tip width: 700 mm Tip height: 150 mm Circulation diameter over bed: 300 mm Bed width: 180 mm Spindle bore: 38 mm Mounting in the spindle bore: MK 5 Speed range, infinitely variable: 30 - 450 / 150 - 3000 rpm Range of longitudinal feeds: (14) 0.07 - 0.65 mm/U Area of plan feeds: (11) 0.03 - 0.12 mm/U Metric threads: (18) 0.2 - 3.5 mm Inch Thread: (21) 8 - 56 Gg/1" Pinole path: 85 mm Pinole holder: MK 3 Engine power S1 100%: 1.5 kW / 400 V Motor recording power S6 40%: 2.2 kW / 400 V Machine dimensions (W x D x H): 1380 x 640 x 500 mm Weight approx.: 235 kg without base Delivery: - Digital display - 3-jaw chuck PO3-160 mm steel version - Feed flange 160 mm - Solid grain tips - Interchangeable wheels - Quick-release steel holder size 20-2 with 2 straight inserts - Slip clutch - Micrometer longitudinal stop - Plan sled with top support - Frequency inverter ...
1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Countertip in spindle Alternating wheels Manual Mudguard complete documentation The machine can be inspected at our warehouse in Reichenbach under electricity.
Stepless guide and pull spindle lathe TC 250 V Peak height: 250 mm Circulation diameter via slide: 350 mm Orbital diameter in the croation: 695 mm Tip width: 1500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide path: 272 mm Upper slide path: 155 mm Spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth Thread: (45) 2 - 72 TPI Metric Thread: (39) 0.2 - 14 mm Diametral Thread: (21) 8 - 44 D.P.I Module Thread: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/U Flat feeds: 0.02 - 0.50 mm/U Engine power: 5.5 kW Dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg characteristics: - Toolmaker accuracy - Stepless speed control (3 pre-level steps) - Finely-balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base - Adjustable precision cone roll ...
Precision lathe with cycle automatic Make: Hamlet Model: E 70 x 2000 Year of construction: 1997 For food and feed shaft machining Technical data: Workspace Turning length: 2000 mm Swing over bed: 720 mm Swing over cross slide plan: 430 mm Displacement of the plan slide: 410 mm Bed width: 480 mm 3prpek3uq Spindle nose ACC. to DIN 55027: size 11 Spindle diameter in front bearing: 150 mm Spindle bore: 106 mm Inside taper of the main spindle: 112 metric Control: Siemens 805 Spindle gearbox newly stored according to the manufacturer ca. 2.500 EUR
Machine details Stock number 1105-03330 Machine type guide and pull spindle lathe Make ERNAULT-SOMUA Type Cholet 550 Year of construction 1990 Control type conventional Storage location FRANCE Country of origin France Delivery time immediately Freight base EX WORK price Technical details Turning diameter over bed 550 mm Turning diameter via support 500 mm Turning length 1100 mm Tip height 250 mm Spindle bore 52 mm Inner cone 136 Spindle speeds 32-1800 rpm Feeds - bed slide / lengthwise 0.05-07 mm/w Feeds flat slide 0.033-0.45 mm/min Total power requirement 13 kW Weight of the machine ca. 2,3 t Space requirement approx. 2870 x 940 x 1400 m Information accessories: PARAT steel holder 4 STUCK 3 bake lining dia 250mm 2 AXIS DIGITAL
Maximum diameter to turn on the bench 2,110 mm Maximum diameter to turn on trolley 1,600 mm Maximum distance between platforms 12,830 mm Spindle hole diameter 155 mm Cone on spindle no. 120 metric Cone on spindle (with reduction) no. 6 clamps Cone on the counterpoint (6-bit reduction) no. 120 metrics Maximum stroke of the counterpoint 400 mm DSeed from the tool support plane to the axis of the 80 mm centers Main engine power 100 HP Spindle speed from 0.9 to 90 rpm with continuous variation Longitudinal feed no. 36: 0.2 to 12.8 Transverse advances No. 36: 0.1 to 6.6 Metric fillets #26: 1 to 42 Whitwoth fillets #17: 0.5 to 11 Quick forwards Maximum permissible load on the tips 50-60 ton Refrigerant liquid system
maximum number of results exceeded
please refine your search
225 € 
