lami used for sale

Scodix Ultra 202 Year 2019 Counter 230.000 copies 
Paper size Min: 29 x 42cm Paper Size Max: 54x78cm Printing size Max: 74x 50 cm Foil technology Digital in-line with Scodix PAS foil technology Foil roll width (min/max 50-500 mm Foil roll size Diameter:max 30 cm; Length:max 2,000 m; Core:77mm/3 in Max number of simultaneous rolls Up to 4 rolls Polymer layer thickness From 5 up to 250 microns Substrate weight 135-675 gsm/6-30 points Substrate thickness Up to 700 microns Foil film type Wide variety of industry standard hot/cold foil films Substrate Offset, Plastics, laminated and coated/uncoated substrates Resolution Up to 2540 x 450 DPI Variable Data Enhancement (VDE) PDF, optimized PDF, barcode system (optional) Scodix RSP™ Technology 4 CCD camera system, RSP™ (Rotate, Scale, Position) algorithm, automatic position ...

ATMSolutions ATMS 2030 150W laser cutting machine was built in 2018 in Poland. Distinguished by state-of-the-art solutions and components, the machine is used for precision cutting and engraving of a wide range of materials, i.e. rubber, wood and leather. Its deformation-resistant design with a large, 3000 mm long and 2000 mm wide through-table makes it possible to achieve high working speeds while maintaining maximum stability. Axis movement is performed by a top-of-the-range drive system consisting of linear guides with ground tracks and linear carriages, which ensures the highest positioning accuracy. The professional LaserWork control software for operating the machine supports the most important file formats and works directly with the most popular graphics programs (CorelDraw, AutoCAD, etc.). The CO2 laser ATMS 2030 is offered with a wide range of equipment, including, among others ...

connection value: 380/400 Volt connection frequency: 50 Hz Year: 1984/1990 Year of construction 1984 / 1990 - Vacuum feeder - Laminating station 12.3024/1 - Press belt 1100 12.302431 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MINK MV 0312 B Dry claw vacuum pump Dry claw vacuum pump BUSCH MINK MV 0312 B DRY VACUUM – QUIET, EFFICIENT AND COMPACT Quiet operation Low noise level thanks to state-of-the-art acoustic solutions, can be installed at workstations Efficiency State-of-the-art claw technology, low energy consumption, minimized operating costs, almost maintenance-free operation, efficient air cooling Compactness Small size SPECIFICATIONS: Nominal flow rate: 290 m³/h Ultimate pressure: 150 hPa (mbar) Nominal motor power: 5.5KW Nominal engine speed: 3000 min⁻¹ Noise level (ISO 2151): 69 dB(A) Weight (approx.): 300 kg Dimensions (L×W×H): 940 x 500 x 650 mm Gas inlet: G 2" Gas outlet: R 11/4" Dimensional Drawing Dry claw vacuum pump BUSCH MINK MV 0312 B Manufacturer's code MV 0312 B Pumping speed Air at 20°C. Tolerance: ±10% Markets & Applications Biogas P ...

GeneralUniversal machining centre; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal600 mmCross500 mmVertical500 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmDie and Mold Package linear incl. B-/C-TorqueDie and Mold Package linear incl. B-/C-Torque Dynamic package V-type Eagle timing belt for Z axis Torque table B-/C-axis including ATC AVD - Heidenhain or MVC - Heidenhain (starting NC 340590 11) APC and Top Speed - Siemens High End cooling unit for machiSpindle speed 20.000 rpm, HSK-A63Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min- ...

2008 NILPETER FA4 9 COLOURS FLEXO LABEL PRESS FULLY EQUIPPED FROM PP MACHINERY – GERMANY 2008 NILPETER FA4 9 COLOURS FLEXO LABEL PRESS FULLY EQUIPPED FROM PP MACHINERY – GERMANY 9 Full Servo Flexo printing units 2 Unwinding units for multiple layers Chilled Rollers Chiller 9 GEW UV Dryers Delam Relam on Rails Turning bar on rails Vetaphone Corona Web Cleaning Web Guide 2. Web Guide Laminating Cold foil application Double die cutters 2x Camera Inspection Manufacturer: Nilpeter USA Type: FA4 Year of Production: 2008 Printing width: 420 mm Machine is available immediately – Please ask PP Machinery Germany team for more information

Description Remnants – GMP POLYNEX UltraBond hot laminating film 8×2 rolls GMP POLYNEX Goss UltraBond gloss 40mic, 305mmx500m OPP film glossy for digital prints, core 77mm The POLYNEX UltraBond hot laminating film has a newly developed special hot glue with particularly good adhesion to toner-based digital prints from e.g. Xerox (except EA toner of DC 240/250/260), Canon, Kodak, Konica Minolta. Particularly suitable for use in systems with automatic sheet separation. Processing temperature: approx. 105 C

For sale is a laminating resin system from IMT SpraySystems. The plant is in very good condition, it has been properly shut down by personnel of the machine manufacturer and filled with mesamol for protection. New price of the system is 85000.-€. The system was cleaned and visually prepared. Circuit diagram, operating instructions and maintenance overview are available. The systems were regularly inspected by the manufacturer as part of a maintenance plan. Applications: Wind power (offshore and onshore) Shipbuilding Lightweight construction Automobile industry Railways (e.g. for the sealing of track beds) Aircraft construction (especially for the construction of the individual components) Corrosion protection Concrete renovation Chemical Resistant Equipment Wastewater (especially in the sewerage system) On request, at an additional cost, the machine can undergo factor ...

Triplex solventless Laminator, The machines of 2018 are like new. Only about 200 hours Matrial for lamination : PP, Bopp, Pet ,laminates ,LDPE, LLDPE. web width =1530 mm Max lamination width = 1515 mm, Min. film width = 750 mm, Min. film width with extensions = 550 mm, diameter unwinder = 1000 mm, sleeve 76 / 152 mm, diameter rewinder = 1200 mm, sleeve 152 mm Speed = 450 m/min, Accessories: The machine has many accessories such as 2 mixing plants World Mixer SL 1 Cleaner SL

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens Sinumerik ONE Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minIntegrated motor spindle speedMASTER®Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWTorque (100% DC) 86 NmTorque (40% DC) 130 NmSpeed range - 20000 rpmSpindle taper HSK-A 63 DIN 69893Clamping System HSK-A 63NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationClamping pneumatic, two circuitsClamping pneumatics, 2 clamping circuits for standard machineTool clamping for HSK-A63Tool clamping HSK-A63 accordi ...

Manufacturer : De lama Model: DLST/L Class 100 Year : 1992 Type: Dry heat oven for sterilisation and depyrogenation.   Volume: 1 m3 Materials : Polished stainless steel - Sterilisation (160 - 180?C): Reduction of micro-organisms and their by-products by up to 12 log - Depyrogenation (220-250?C): Destruction of pyrogens and endotoxins inside materials - Horizontal laminar flow - Double door (new) - Electric heating - 2 trolleys - Olympia/EXP3: Control, regulation, management and recording system with high-speed processor. Possibility of designing the oven to withstand operating temperatures of up to 300?C in continuous service, thanks to the use of HEPA filters with a special sealant. Main applications : - empty glassware (e.g. vials, ampoules, bottles) - stainless steel equipment (e.g. trays, machine parts) - moisture-sensitive materials - basi ...

Enko ES 1800 ST Year: 2009 TECHNICAL SPECIFICATION Suitable for the following Materials Solid board : up to 300 g/m² Corrugated and laminated corrugated : 0.5 - 12 mm Cabability specifications: Sheet size : max. 1800 x 1300 mm Min. 800 x 700 mm Cutting pressure : max. (450 t) 4.5 Maximum number of strokes :max. 3000 s/h Dimensions and Weights : Length of machine : approx. 6300 mm Width of machine : approx. 3200 mm Height of machine : approx. 2150 mm Weight of machine : aprox. 24 t Pile height Feeder : max 1200 mm Delivery : max. 1160 mm Technical Data Gripper edge margin, adjustable from : 10 - 18 mm Cutting knife height: 23.8 mm Wood front edge: 27 mm Electrical connected load: 48 KW Electrical supply: 3 Ph 400 V 50 Hz Compressed air required: 6 bar (kg/m²)

Vertical impulse sealer Fields of application Food industry, Pharmaceuticals, Chemicals,... Thin polyethylene bags and/or thick multilayer laminates 304 stainless steel frame with locking wheels Mechanical adjustment of the sealing height Single impulse sealing bar mechanism Screen/keyboard for setting parameters Manual closing of the sealing bars Cycle indicator Power supply : 230 V mono + earth Power : 2.1 KW Sealing length : 1000 mm Sealing width : 10 mm Length : 1100 mm Width : 850 mm Height: 1730 mm max Weight : 80 Kg

eference ID PP-40000 Category Label Printer Manufacturer - Model 3300 Year Built 2015 Color 4 Impression- Working Hours - Speed 19.2 m/min Max. Size 200 - 330 mm Min. Size - Condition Good Location Europe Availability - Machine Description process: LED-array-based, dry toner electrophotography full rotary operation color configuration: 5/0 simplex In-line density control: standard in-line register control: standard toner: Xeikon FA toner, Pantone® calibrated (pending) - CMYK, spot colors, opaque white or security toner pre-printed stock functionality: standard web-fed: SA label (paper, PP, PET, vinyl, co-extruded film), unsupported film, paperboard, paper media width: 200 - 330 mm (7.9" - 13.0") media weight: 40 - 350 gsm (27 lb text to 122 lb cover) Media Caliper: 40 - 350 μm (1.6 mil - 13.5 mil) Web Speed: 19.2 m/min (32.0 cm/s; 63.0 ft/min) (Paperboard 9.6 ...

ENGEL 800 T injection press + ENGEL robot + Magnetic plates REF: 5550/800 Screw diameter: 105 mm L/D ratio: 20 Maximum material pressure: 1600 bars Injectable volume: 3720 cm3 Lamination: 183 g/s Dosing stroke: 430 mm

Nuaire NU-440-600E fume hood The Nuaire 440-600 is ergonomically designed for user comfort and offers users more knee room. The Nuaire 440-600 has a unique sealed construction and a True Laminar AirFlow HEPA filtration system. The 440-600 biosafety cabinet features the advanced AirFlow Control Electronic System with precise programmable control for a safe, reliable environment. Specifications: Voltage: 230V, 50Hz Current: 11A Downflow 38 M/S Inflow: 46 M/S Inclusive: -2x 230 volt socket -Fluorescent lamps External dimensions (W) x (D) x (H): 200 x 85 x 150cm Item condition: used More items - new and used - can be found in our shop! International shipping costs on request!

Rondo Laminazione pastry sheeting line 2001, Stainless, total length 7000mm, this line comprises an infeed section – multi roller satellite head, cross pinner and then calibrator making puff pastry from blocks / billets to final width of 600 mm and 2-3mm thickness, comes complete with electrical drawings and manuals.

IMANPACK ribbon flowpack with top spool Description Horizontal packaging machine suitable for packaging solid products with polypropylene, polyethylene or laminated films. Product range Length: from 80 to 600 mm Width: from 40 to 180 mm Height: up to 100 mm Speed Up to 40 containers / min

Three-point box gluer equipped with three plasma torches for gluing even surface-treated boxes, eg laminate. It is possible to glue boxes made of various materials. From 300g / m offset papers to e-wool or 3VVL cardboards.

Combined CNC glass cutting table with topiary for glass & straight cut for laminated safety glass - CNC control panel with PC & modem for remote maintenance - 2 crushing strips 1 x crosswise 1 x longitudinal - software package "Edit-Way" with 250 parameterized shapes - CAD program for free drawings - vinyl cutting system incl. software & head - Shape scanner for copying shapes with laser system (also used for aligning the glass) - graf. Interface for controlling, cutting process & machine functions - Movement of the glass by means of air cushion - Loading and unloading by hydraulic movement arms - Zero point displacement for laminated safety glass cut - Ball-bearing sliding bridge in aluminium design - UPS system for voltage fluctuations. Specifications: max working area 3700 x 2600 mm - incl. side table 1500 x 3600 mm - glass thicknesses 2-19 mm - working height 880 - 970 mm adjustabl ...

For sale is a NOVAPAC 75 M with laminar airflow system which was completely overhauled by NOVAPAC. Format is a 500 gram cup which is closed with a circuit board. In addition to the UV cups and blank disinfection using UV light, NOVAPAC added a laminar airflow system to keep the filling area clean. Price is a matter of negotiation and the system can currently still be viewed at the customer's premises. A NOVAPAC 75 M with laminar airflow system is being sold, which was completely overhauled by NOVAPAC. The format is a 500 gram cup that is closed with a circuit board. In addition to the UV cup and circuit board disinfection using UV light, NOVAPAC added a laminar airflow system to keep the filling area clean. The price is a matter of negotiation and the system can currently still be viewed at the customer's.

Automatic packing machine for filling and packing tea into tea into common rectangle tea bags with final packing of the tea bag into a 3-side sealed sachet. Including Volume dosing unit and tag system. Tag system: both sides (label-thread and thread-bag) by heat sealing. Device for grouped bag output. PLC controlled, operation via touch screen. - Specifications: max. speed of the machine in neutral: 115 cycles per minute | dosing volume: max. 10cm? | tea bag dimensions LxW: 65x62.5 mm | roll width tea bag material: 125 mm (optional 140 mm) | suitable tea bag material: 16.5-21g/m?, one side heat sealable | 3-side sealed sachet dimensions LxW: 82x75 mm | sachet material: heat sealable mono films or laminated composite film | label (LxW): 26x24 mm | thread length: 220 mm | power supply: 220/380V | power consumption: 3kW | compressed air required: 0.6 MPa | compressed air consumption: 100-30 ...

Automatic packing machine for filling and packing tea into tea into common rectangle tea bags with final packing of the tea bag into a 3-side sealed sachet. Including Volume dosing unit and tag system. Tag system: both sides (label-thread and thread-bag) by heat sealing. Device for grouped bag output. PLC controlled, operation via touch screen. - Specifications: max. speed of the machine in neutral: 110 cycles per minute | dosing volume: max. 6cm? | tea bag dimensions LxW: 62,5x50 mm | roll width tea bag material: 125 mm (optional 140 mm) | suitable tea bag material: 16.5-21g/m?, one side heat sealable | 3-side sealed sachet dimensions LxW: 80x70 mm | sachet material: heat sealable mono films or laminated composite film | label (LxW): 26x24 mm | thread length: 210 mm | power supply: 220/380V | power consumption: 3kW | compressed air required: 0.6 MPa | compressed air consumption: 100-300 ...

Automatic packing machine for filling and packing tea into tea into common rectangle tea bags with final packing of the tea bag into a 3-side sealed sachet. Including Volume dosing unit and tag system. Tag system: both sides (label-thread and thread-bag) by heat sealing. Device for grouped bag output. PLC controlled, operation via touch screen. - Specifications: max. speed of the machine in neutral: 05 cycles per minute | dosing volume: max. 20cm? | tea bag dimensions LxW: 75x75 mm | tea bag capacity: 5-8g | roll width tea bag material: 155 mm | suitable tea bag material: 16.5-21g/m?, one side heat sealable | 3-side sealed sachet dimensions LxW: 82x75 mm | sachet material: heat sealable mono films or laminated composite film | power supply: 220/380V | power consumption: 3kW | compressed air required: 0.6 MPa | compressed air consumption: 100-300l/min | machine dimensions LxWxH: 2800x1310 ...

Fully automatic high speed tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun cream etc. Suitable for plastic and laminated tubes with prefabricated, closed lids. The high number of cycles with up to 75 cycles per minute is achieved, among others, by using a timing belt drive instead of a timing chain. The filling machine has a no-tube-no-filling function. The dosing unit is included and is selected according to the product characteristics. Stamping characters for e.g. batch printing are integrated into the sealing jaw. Mitsubishi PLC, Weinview touch screen. - Specifications: max. speed of the machine in neutral: 75 cycles/minute (corresponds to: max. 150 tubes/minute) | filling range (one of the three ranges selectable): a) 5-25ml, b) 15-150ml, c) 30-200ml | accuracy: +/-1 ...

Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun cream etc. Suitable for plastic and laminated tubes with prefabricated, closed lids. The filling machine has a no-tube-no-filling function. The dosing unit is included and is selected according to the product characteristics. Stamping characters for e.g. batch printing are integrated into the sealing jaw. Mitsubishi PLC, Weinview touch screen. - Specifications: max. speed of the machine in neutral: 50 cycles/minute (corresponds to: max. 100 tubes/minute) | filling range (one of the three ranges selectable): a) 5-25ml, b) 15-150ml, c) 30-200ml | accuracy: +/-1% | max. length of the tube: 200mm | tube diameter: 10-50mm (whereby one mould is required per tube diameter) | number of filling heads: 2 | storage hop ...

Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun cream etc. Suitable for plastic and laminated tubes with prefabricated, closed lids. The filling machine has a no-tube-no-filling function. The dosing unit is included and is selected according to the product characteristics. Stamping characters for e.g. batch printing are integrated into the sealing jaw. Mitsubishi PLC, Weinview touch screen. - Specifications: max. speed of the machine in neutral: 40 cycles/minute | filling range (one of the three ranges selectable): a) 5-25ml, b) 15-150ml, c) 30-200ml | accuracy: +/-1% | max. length of the tube: 200mm | tube diameter: 10-50mm (whereby one mould is required per tube diameter) | number of filling heads: 1 | storage hopper capacity: 40/50 L | product contact  ...

Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun cream etc. Suitable for plastic and laminated tubes with prefabricated, closed lids. Fully automatic feeding, filling and sealing of the tubes. The filling machine has a no-tube-no-filling function. The dosing unit is included and is selected according to the product characteristics. Water cooling system, batch printer also included. PLC controlled with easy operation due touch screen. Optionally for surcharge: automatic tube outfeed device for convenient connection with other equipment such as cartoning machine. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | filling range: 10-250ml | accuracy: = +/-1% | tube dimensions: customized, whereby one mold is required per tube diameter | ...

Fully automatic filling and closing machine for filling pharmaceutical liquids into vials. Suitable for aseptic filling and for vaccines. The main machine doses with peristaltic pump system safely, precisely and caps the vials with a freeze dryer stopper. The 8-head capping machine also works very quickly, precisely and is suitable for aluminum twist-off caps. The vials are guided individually, which enables safe and fast filling and capping. The included collecting table for the final product, the main machine and the capping machine can be flexibly combined to a complete line. All machines are equipped with dust cover and laminar flow hood. - Specifications of filling and capping system: number of filling stations: 4 | number of capping heads for freeze dryer stopper: 1 | number of capping heads for aluminum twist-off caps: 8 | filling volume: max. 30ml per vial | speed of the machine  ...

Fully automatic filling and closing machine for filling pharmaceutical liquids into vials. Suitable for aseptic filling and for vaccines. The main machine doses with peristaltic pump system safely, precisely and caps the vials with a freeze dryer stopper. The 1-head capping machine also works quickly, precisely and is suitable for aluminum twist-off caps. The included collecting table for the final product, the main machine and the capping machine can be flexibly combined to a complete line. All machines are equipped with dust cover and laminar flow hood. - Specifications of filling and capping system: number of filling stations: 4 | number of capping heads for freeze dryer stopper: 1 | number of capping heads for aluminum twist-off caps: 1 | filling volume: max. 30ml per vial | speed of the machine in neutral: max. 120 bottles/min (at 4 filling stations and 5ml per vial) | accuracy: =  ...

Code: 0260 Brand: OMMA Model: FTF 1400/2M - CE Standard Automatic 4 rollers glue spreader for wood panels, laminates, technical panels, foam, soundproofing, plasterboard, doors etc. - CE Standard Technical data: Rigid and solid frame Working width mm 1360 Max working thickness mm 80 Working table height mm 905 Diameter of rubber coating rollers mm 250 Diameter of dosing rollers chromium plated mm 185 Installed power Kw 1,1 Dosing rollers chromium plated. These rollers can be easily cooled with cooling device "CRIO" Electronic variable working speed with display Analogic dial of the distance between the spreading rollers with 1/10 mm reading precision High uniformity of the spreading on full working width Motorised rotating disc ejector Stainless steel collecting tank of the cleaning water Cooling device "CRIO" to maintain the original glue characteristics in term ...

REF-2495 FAM FLEXIFAM SLICER-DICER The FAM Flexifam is a cutting machine suitable for cutting into slices, strips and dices. Mainly made of stainless steel with the exception of some pieces of the drive. The chassis, the lamination of the plaques, the feed hopper and the outfeed hopper are completed with glass microspheres. The three-dimensional cutting operation ensures the perfect uniformity of the product. Brand: FAM Model: Flexifam Machine no.: 6700/2007 Year of manufacture: 2007 Three-phase. 400 V. 50 Hz. 20 A 5.5 kW/7.48 HP Throughput: 2,000 kg/h Dimensions: width 1,747 mm; length 1,066 mm; height 1,555 mm Weight: 550 kg Complete with one cutting head: 3 mm dices or 8 mm dices (choose one)

Automatic packing machine for filling and packing tea into tea into common rectangle tea bags with final packing of the tea bag into a 3-side sealed sachet. Including Volume dosing unit and tag system. Tag system: in the standard version the label is folded and glued together with the inserted thread. Optionally, a heat-sealing module is available for this production step. Method for attaching the thread to tea bags: by heat sealing into the tea bag edge. Grouped bag output either counted individually or in an erected box (optional). - Specifications: max. speed of the machine in neutral: 115 cycles per minute | dosing volume: max. 10cm? | tea bag dimensions LxW: 65x62.5 mm | roll width tea bag material: 125 mm | suitable tea bag material: 16.5-20g/m?, one side heat sealable | 3-side sealed sachet dimensions LxW: 82x75 mm | sachet material: heat sealable mono films or laminated composite ...

Automatic packing machine for filling and packing tea into tea into common rectangle tea bags with final packing of the tea bag into a pillow bag (up to 5 tea bags in one sachet possible). Including Volume dosing unit and tag system. Tag system: both sides (label-thread and thread-bag) by heat sealing. - Specifications: max. speed of the machine in neutral: 115 cycles per minute | dosing volume: max. 6cm? | tea bag dimensions LxW: 62.5x50 mm | roll width tea bag material: 125 mm | suitable tea bag material: 16.5-21g/m?, one side heat sealable | pillow bag dimensions LxW: 100x130 mm, L is adjustable (vffs) | pillow bag material: heat sealable mono films or laminated composite film | label (LxW): 26/28x24 mm | thread length: 210 mm | power supply: 220/380V | power consumption: 2W | machine dimensions LxWxH: 1400x905x2475 mm | weight: 910kg.

Automatic rotary cup or container filling system for liquids including dosing unit and sealing module for the lidding film. Suitable for products with flow characteristics, various container sizes, shapes and materials (e.g. PP, PS, PET, Paper, laminated films, etc.). Automatic operation from drop cup, filling to sealing. 2 cups / containers will be handled per cycle. Touch screen for easy operation, stainless steel version, easy cleaning. Print mark sensor. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: filling capacity: customized | max. speed of the machine in neutral: 80 cycles/minute | power: 220V / 380V, 2kW | machine dimensions: L1100xW1100xH1600m | weight: approx. 400kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below t ...

Suitable for the production of 2D/2.5D laminate stacks from thermoset semi-finished products in the Fiber Placement process, speed: 60m/min, laying area: 1100x1400mm, with documentation, on-site inspection is possible.

Max. output: 10,800 cups/min, cup format: 2x3, with documentation, film transport, main filler, laminar air over the entire filling line, laminar tunnel from the moulded part to the film lift with laminar box, die cutter with spare die cutter, packer, Mettler-Toledo weighbridge, outfeed and high stacker, regularly overhauled.

Automatic packing machine for filling and packing tea into tea into common rectangle tea bags with final packing of the tea bag into a 3-side sealed sachet. Including Volume dosing unit and tag system. Tag system: in the standard version the label is folded and glued together with the inserted thread. Optionally, a heat-sealing module is available for this production step. Method for attaching the thread to tea bags: by heat sealing into the tea bag edge. Grouped bag output either counted individually or in an erected box (optional). - Specifications: max. speed of the machine in neutral: 115 cycles per minute | dosing volume: max. 6cm? | tea bag dimensions LxW: 62.5x50 mm | roll width tea bag material: 125 mm | suitable tea bag material: 16.5-21g/m?, one side heat sealable | 3-side sealed sachet dimensions LxW: 80x70 mm | sachet material: heat sealable mono films or laminated composite  ...

Automatic multi-lane filling and capping machine for cups, containers or trays incl. film sealing unit. Suitable for various container sizes, shapes and materials (e.g. PP, PS, PET, paper, laminated films, etc.). Equipped with 6 piston pumps for dosing of liquids and past-like products. In general, the line can be configured for all types of (separate) dosing systems for fresh or dry, chunky products, granules or powdery products (price adjustment may be necessary). This allows perfect filling and packaging of instant meals, pasta, pasta, fresh or dried fruits, snacks, soup powders, frozen meals, yogurt, ice cream, jam, etc. Automatic operation from feeding the containers/cups, filling, sealing with film and capping with a lid. Easy operation due to touch screen monitor, stainless steel version (SUS304), easy to clean. Other features: print mark sensor, stirrer for hopper, level sensor,  ...

Automatic multi-lane filling and capping machine for cups, containers or trays incl. film sealing unit. Suitable for various container sizes, shapes and materials (e.g. PP, PS, PET, paper, laminated films, etc.). Equipped with a 4-head linear weigher and 4 piston pumps for liquid dosing, this sample line is especially suitable for fresh olives and liquids. In general, the line can be configured for all types of (separate) dosing systems for liquids, pastes, granules, powders (price adjustment may be necessary). This allows perfect filling and packaging of instant meals, pasta, pasta, fresh or dried fruits, snacks, soup powders, frozen meals, yogurt, ice cream, jam, etc. Automatic operation from feeding the containers/cups/trays, filling, sealing with film and capping with a lid. Easy operation due to touch screen monitor, stainless steel version (SUS304), easy to clean. Print mark sensor ...

Sheet format: 100-1000x40-1120mm, max. carton thickness: 20mm, output carton/ paper: 7-60/ 7-40 sheets/min, weight: 1t, with pressure belt and sheet laminating station, including documentation.

Automatic multilane cup or container filling system including film sealing module. - Suitable for different container sizes, shapes and materials (e.g. PP, PS, PET, Paper, laminated films, etc.). Perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc.. Automatic operation from drop cup, filling to sealing. Suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc.. Touch screen for easy operation, stainless steel version, easy cleaning. Print mark sensor. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: number of lanes: 2 | max. speed of the machine in neutral: 60 cycles/minute | power: 220V, 2.6kW | compressed air: 0,2m?, 6bar | machine dimensions: L3000xW950xH1600mm. That machine/system is available in different versions for  ...

Automatic multilane cup or container filling system including film sealing module. - Suitable for different container sizes, shapes and materials (e.g. PP, PS, PET, Paper, laminated films, etc.). Perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc.. Automatic operation from drop cup, filling to sealing. Suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc.. Touch screen for easy operation, stainless steel version, easy cleaning. Print mark sensor. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: number of lanes: 2 | max. speed of the machine in neutral: 40 cycles/minute | power: 220V, 2.1kW | compressed air: 0,2m?, 6bar | machine dimensions: L3000xW850xH1600mm. That machine/system is available in different versions for  ...

Automatic rotary cup or container filling system including film sealing module. - Suitable for different container sizes, shapes and materials (e.g. PP, PS, PET, Paper, laminated films, etc.). Perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc.. Automatic operation from drop cup, filling to sealing. Suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc.. Touch screen for easy operation, stainless steel version, easy cleaning. Print mark sensor. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: number of working stations: 12 | max. speed of the machine in neutral: 20 cycles/minute | power: 220V, 2.1kW | compressed air: 0,1m?, 6bar | machine dimensions: L900xW850xH1600mm. That machine/system is available in different versi ...

Automatic rotary cup or container filling system including film sealing module. - Suitable for different container sizes, shapes and materials (e.g. PP, PS, PET, Paper, laminated films, etc.). Perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc.. Automatic operation from drop cup, filling to sealing. Suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc.. Touch screen for easy operation, stainless steel version, easy cleaning. Print mark sensor. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: number of working stations: 8 | max. speed of the machine in neutral: 20 cycles/minute | power: 220V, 1.5kw | compressed air: 0,1m?, 6bar | machine dimensions: L950xW870xH1600mm. That machine/system is available in different versio ...

Flowwrap machine - servo version - for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. No-product-no-bag function through servo control and servo motors. - Infeed table with automatic transport through pushers into the machine. Special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. Film supply from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device and splice unit (automatic change of film roll). - Technical specifications: max. film width: 600mm | 1 rotating knife | 220V, 3.2kW | no compressed air required | max. speed of the machine in neutral: 250 cycles/min | max. bag ( ...

Flowwrap machine for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, small products. Infeed table with automatic transport through pushers into the machine. Film supply from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 250mm | 2 rotating knives | 220V, 2.4kW | no compressed air required | max. speed of the machine in neutral: 230 cycles/min | max. bag (not product) dimensions (mm): L(90-220)xW(30-110)xH(0-55): machine dimensions (mm): L3770xW670xH1450 | weight (net/gross): 700/750kg. The machine has to operate with minimum of 30 cycles per minute to avoid premature melting of the OPP film. Please note that our new pric ...

Automatic packing machine for packing common rectangular tea bags or double chamber bags into 3-side sealed sachets. Device for grouped bag output. PLC controlled, operation via touch screen. - Specifications: max. speed of the machine in neutral: 120 cycles per minute | suitable volume of tea bag: max 10 cm? | 3-side sealed sachet dimensions LxW: 70x80 mm | sachet material: heat sealable mono films or laminated composite film | power supply: 220/380V | machine dimensions LxWxH: 1680x1285x1230 mm | weight: 500kg.

Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 60 cycles/minute | suitable for volumes from 100-1000ml | stepless bag length regulation | accuracy: depending on water level product | max. film width: 50-200mm | bag size: max. L50-250xW50-200mm | without air pressure | 220V, 1.95kW | stainless steel version (SS201 in housing, contact material part SS304) | machine dimensions: L1120xW920xH2050mm | weight: 500kg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations fr ...

Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 70 cycles/minute | suitable for volumes from 20-100ml | stepless bag length regulation | accuracy: depending on water level product | max. film width: 30-150mm | bag size: max. L50-220xW30-150mm | without air pressure | 220V, 1.7W | stainless steel version (SS201 in housing, contact material part SS304) | machine dimensions: L790xW600xH1780mm | weight: 400kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately  ...