lami used for sale

Automatic Laminator Maximum format: 540x790 mm Weights: 130-350 gsm

YEAR: 2015 CONDITION: GOOD CONFIGURATION: MANUAL LOADING AUTOMATIC SEPARATION PNEUMATIC PRESSURE DELIVERY TECHNICAL SPECIFICATIONS: MAX. SPEED - 15 M/MIN SHEET LOADING - MANUAL SEPARATION OF LAMINATED SHEETS - AUTOMATIC PAPER THICKNESS - 115 - 350 G/M2 MAIN ROLLER PRESSURE - PNEUMATIC COMPRESSOR - STANDARD, IN THE MACHINE FRAME MIN. SHEET SIZE (W X D) - 20 X 30 CM MAX. SHEET SIZE (W X D) - 38 X 58 CM MAX OUTPUT - 1200 W3/H TEMPERATURE CONTROL - 80 - 140°C ROLLER HEATING TIME - 5 MIN IMMEDIATELY AVAILABLE FORM OUR WAREHOUSE IN 67269 GERMANY

Manufacturer: Meier Vakuumtechnik GmbH Quantity: 2 pieces Model: Vacuum laminator ICOLAM 080 System designation according to the documentation: Vacuum laminator Year of Make: 1997 Conversion: 2002 (controller replacement / connection to control system according to documentation) Feed: 3x400 V/N/PE Supply line: 4 × 25 mm² Control voltage: 24 V DC Degree of protection: IP54 Standard / Regulation: EN 60 204 Location: Schierling (original installation location according to documents: 86919 Utting) Viewing possible by appointment.

Size: 1045 x 1135 mm Equipments: Thermal laminating Flat pile feeder IA 20 Suction feeder head Automatic rotary separator ITM 104 Jogger Maximum laminating format: 1045 x 1135 mm Minimum laminating format: 215 x 215 mm Substrate thickness: 150 - 450 g/sqm Foil thickness: 24 - 40 microns Speed: 2500 - 4500 sheets/hour

Laminator with oil calender (resistance heating) Max format: 1050x820 mm Min format: 300 x 300 mm Weights: 105-500 gsm

Laminating machine / Film to sheet Make Matrix Model SH-460 Year 2010's ? Max size 455 mm Details single or double sided lamination Production output 1.6 meters per minute Details including 1 roll of satin lamiantion material Available direct

Norfoil 2000 reel to reel hot stamping press Web width 160 mm Unwind Web guide Cutting Lamination Hot foil Rewind Waste rewind Razor blade slitter

A laminating machine Windmöller und Hölscher, without adhesive and coating unit, is available. Web width: 1420mm, coating width: 1400mm, max. roll diameter: 1000mm, max. roll weight: 1300kg, core inner and outer diameter: 76mm/95mm, max. mechanical speed: 460m/min, min. material thickness: 15mm, max. material thickness: 250µm, total machine dimensions X/Y: 19500mm/2500mm. The machine was used as a rewinder. Documentation available. On-site inspection is possible.

Format 54 x 76 cm – 20 x 20 cm Speed : 35 m/min Paper weight : 150-600 g/m2

This Columbus MULTIMAT laminating press was manufactured in 2013. It features a large press table measuring 3000 x 1400 mm, ideal for handling substantial materials. Consider the opportunity to buy this Columbus MULTIMAT laminating press. Contact us for more information.

This BURKLE BTF 1628 laminating press was manufactured in 1998. It features a max panel size of 1250x2550 mm, panel thickness range of 6-35 mm, and a heating plate dimension of 1600x2800 mm. Equipped with a Siemens control system and a total power requirement of 38 kW. Consider the opportunity to buy this BURKLE BTF 1628 laminating press. Contact us for more information.

This LIGMATECH MPP 15 laminating press was manufactured in 1998. A robust and reliable choice for your laminating needs, it represents a solid addition to any production line. Contact us for more information.

This HRB HRB-1450F was manufactured in 2021. A robust laminating press, it handles a maximum sheet size of 1450 × 1200 mm and operates at speeds up to 6,000 sheets/hour. Powered by a 380V / 50Hz supply and weighing approximately 5,000 kg, it remains in excellent condition and is still in production. If you are looking to get high-quality laminating capabilities, consider the HRB HRB-1450F machine we have for sale. Contact us for more information.

This Hüttenhölscher Body Press was manufactured in 2000. Ideal for efficient carcase pressing applications, it represents a reliable choice for your production needs. Contact us for more information.

This WILD door leaf press line was manufactured in 1998. It is designed for door production, handling dimensions from 1,800 to 2,300 mm in length, 500 to 1,300 mm in width, and thicknesses of 35, 40, and 44 mm. The line includes areas for gluing, pressing, and handling door panels with advanced feeding and transfer systems. If you are looking to get high-quality door production capabilities consider the WILD door leaf press line we have for sale. Contact us for more information.

This DIMTER PROFIPRESS L2500 was manufactured in 2007. A robust used gluing press, it features a press bed of approximately 2500 x 1300 mm and a stable base frame. It includes a motor-driven multifunctional pusher and an automatic gluing station with a precision glue head. Ideal for both softwood and hardwood, it ensures even pressure distribution and high vertical pressure for low offset. Contact us for more information about this machine.

This Columbus Vacuformtisch XL was manufactured in 2006. A used vacuum press with a total length of 3100 mm, width of 1550 mm, and height of 1000 mm. It offers a usable area up to 2900 mm by 1300 mm, with a total pressure capacity of 29 tons. Ideal for diverse laminating needs. Contact us for more information about this machine.

Ultrasonic Lamination bonding line, Side tape, frontal tape , MD elastic, CD elastic , Elastic Strech film line

Reference ID: PP-56132 Category: Laminator Manufacturer: Steinemann Model: Lotus SF 102 Year: 2005 Max. size: 102 cm × 142 cm Condition: Good Location: Europe Availability: Immediately Description Double-calendar system Can be seen in working condition Includes 1 spare bottom impression roller Measurement rollers in various sizes will be provided

Manufacturer: SEAL Model: 80 Pro D Technical Specifications - Maximum processing width: 2,030 mm - Maximum speed: 6 m/min - Maximum material thickness: 38 mm - Maximum roller pressure: 2.5 N/mm - Maximum roller temperature: 140 degrees C - Roller heating: both sides (top and bottom) Machine Dimensions - Width: 2,667 mm - Height: 1,654 mm - Depth: 634 mm - Net weight: 780 kg Transport Dimensions - Width: 2,710 mm - Height: 1,690 mm - Depth: 900 mm - Transport weight: 840 kg Electrical Data - Power supply: 3N/PE 230 VAC +/- 10%, 50/60 Hz, 25A Key Features - Variable temperature, speed and pressure settings - Ergonomic touchscreen control panel on swivel arm (operable from front and rear) - Feed table with tension rollers and fold-down print guide for smooth and even media feed - Longitudinal cutting device for trimming finished products during processing - Foldable pull rollers  ...

This F&O 03035 laminating press was manufactured in 2003. It features a working width of 1300 mm and a melting unit capacity of 200 kg. The outfeed roller conveyor is approximately 9000 mm long. In 2024, the infeed conveyor was upgraded with 4 brushes and radiant heaters. Consider the opportunity to buy this F&O 03035 laminating press. Contact us for more information.

laminating machine Foliant 400S 38x58 cm

This laminating press was manufactured in 2024. It features a robust servo-hydraulic drive system and operates at pressures between 6-8 bar. With a substantial footprint of 1000 × 2500 mm and a working table size of 1500 × 1000 mm, it is ideal for panel processing and interior components. Consider the opportunity to buy this Other COMAG MPM 1500-1000 T6-E laminating press. Contact us for more information.

Since the machine is used too little, it is sold. Technical data Max. sheet width: 420 mm max. Speed: 10 m/min Max. film width: 340 mm Lamination: single-sided Spot Sleeking: yes Shrink-wrapping (encapsulation): no Pressing: pneumatic, adjustable Material: from 135 g/m² Heat-up time: 10 min Temperature range: 80 - 140 °C, adjustable Core diameter foils: 76 mm: Power supply: 230 V / 50 Hz All information without guarantee Price is 5000 Euro net plus VAT

Working width - 1700 mm, material in rolls, Raw material - paper (50-300 g/m²), foil (0.023-0.10 mm) Substances - solvent-based adhesive, water-based adhesive Coating type - Mayer rod, anilox roller, slotted roller Dryer - 18 m long, 7 drying sections, temperature 30°C-170°C, gas drying (blower) Roll diameter - max 1400 mm

Working width – 650 mm Material in rolls Raw material – 950-350 g/m² paper, foil Substances – solvent-based adhesive, water-based adhesive Coating type – Mayer rod, slotted roller Working speed – 0-80 m/min Dryer – 8 m, 3 sections, temperature 3°C-120°C, electric drying Dimensions – 14 m x 1.8 m x 1.8 m Roll diameter – max 1000 mm

MANUFACTURER GMP WIDTH (MM) 1550 HIGHT (MM) 1210 WATT 100 AMPERE 0.4 MORE INFORMATION LAMINATING SIZE: 1120MM TYPE EXCELAM-Q1120COLD/RS DEPTH (MM) 610 VOLT 230

Reference ID PP-57328 Category Laminator Manufacturer Billhöfer Model EK 102-50 Year Built 2002 Color - Impression - Working Hours - Speed - - Max. size 102 x 114 cm Min. Size - Condition Good Location Europe Availability Immediately Machine Description Both water-based adhesive and thermal. Separator Laminated Delivery Table

GMP PROTOPIC 520 MAX SHEET SIZE 520 X 720 MM MAX SPEED 15 M / MIN AUTOMATIC SHEET SEPARTOR MANULA FEEDER OIL TEMPERATURE CONTROLLED LAMINATING ROLLER COMPRESSOR

A laminar flow unit Bleymehl for aseptic product protection is available. Total air volume flow: 1200m³/h, electrical power: 0.4kW, machine weight: approx. 90kg. Including one replacement curtain. The machine was manufactured in 2005, however only commissioned in 2018. Documentation available. An on-site inspection is possible.

Laminate drill , 3 x 400 volts, 3 Ph, 6.5 KVA, Pneumatic air required 6 bar maximum, asset number ANR3005, S/No. M18076, year 2018 Auction-ID: A1-45187-11

Type: KS-SW-2-50-R-2-400-SPT-1400-12, consisting of, 1x Sander” winder type AFW-1-1400-1200-12-B with BSTgroup” digitial controller (2022), edge cutting system, 1x Sander” winder ABW-1-1400-1200-12-B with Siemens” touchpanel BSTgroup digital controller (2022), 2-door switch cabinet HSS-sara, used floor space approximately 7.500x2200mm, total weight approximately 5000kg Auction-ID: A1-43459-13

Model - ALM3222 ?Laminating Width - 330mm ?Speed -0,5 to 1,7 m/min (variabel) ?Film Thickness - 30 Mikron bis 125 Mikron ?Heat Type - Heated Rollers: Dual heat only ?Temperature Range - 80 - 130 ° C ?Warm-Up Time - 5 minutes ?Paper width - 257 - 330 mm Paper Length - 182 - 457 mm Paper thickness - 0,07 - 0,25 mm ?Paper Feed Capacity - 200 Sheets, Adjustable Paper Guide ?Trimming Methods - Flush cut or Border cut

GEHI GZYH19004 – Rolling Mill General data: Manufacturer: Nantong Geron Intelligent Equipment R&D Co., Ltd. Brand: GEHI Model: GZYH19004 Year of manufacture: 08.2019 Serial number: RM2019003 Dimensions (L x W x H): 18000 x 3000 x 2000 mm Technical specifications: Power supply voltage: 380 V Frequency: 50 Hz Installed power: 200 kW Working speed: 0 – 150 m/min Input material (wire): Ø ≤ 13 mm Key features: Suitable for processing wire/round material up to 13 mm diameter; High-capacity industrial line with 200 kW installed power; High processing speed up to 150 m/min; Heavy-duty industrial machine with total length of 18 meters Description: Industrial rolling mill designed for high-speed processing of wire and round materials. The GEHI GZYH19004 offers robust construction, high performance, and efficiency, making it suitable for demanding production  ...

Type LAMB 1400, 2-layer, laminating pressure 4-6N/cm, laminating temperature 30-80°C, coating weight 3-5g/m2, production speed 1m/min, consisting of, 3x winder, 1x \"TSK LIA\"-brushing unit (2023) s/n 1311, horizontal wet proces cleaning unit, 3x IBC for demineralised water, 1x water treatment unit, overhead travelling crane with abus electrical chain hoist capacity 2000Kg, 1x \"Technotrans\" heating / cooling unit type teco tt 140.27.058, nominal heating/cooling capacity 27/200kW (2022), 1- \"Technotrans\" heating / cooling unit type teco wtd 150.09.25 nominal heating/cooling capacity 9/600kW (2022) 1x air-handeling cabinet, 1x 7-door switch cabinet. Used floor space approximately 13.000x7100mm Auction-ID: A1-43459-9

Type Reco 800, consisting of: roll unwinding system with portal crane and Abus” electric chain hoist capacity 1000kg, Kroenert” applicator unit, laminator unit, overhead ir heater, 3-zone drying tunnel, pulling station and rewinder, 3 Pfeiffer” vacuum pumps type HiScroll 12, Wiltec” glue mixing and dosing unit type 46.2Kgluemix VR, Technotrans” modular temperature control unit type teco wd 150, heating / cooling capacity 9/600kW, 1 pneumatic switch cabinet, 11-door electrical switch cabinet, used floor space 19.000x4200mm, total weight approximately 30.000kg Auction-ID: A1-43459-14

Type PV-ODW 1462/80 operating height 0-80mm, operating speed max. 6 m/min., max. Press force 100kN, temperature max. 200°C, complete with: unwinder unit, Bürkle” glue top-bottom applicator type EKM, 2KM” glue metering mix module type PGM320, unwinder unit, Sander” roll winder type AFW-1-1400-1200-12-B (2021) with 2-door switch cabinet, 3x Bürkle” oil heater unit, central switch cabinet with Siemens” touchscreen panel and Siemens” simatic mobile panel,”Bürkle” 6-door switch cabinet and fixed crane portal with SWF” electric chain hoist capacity 1000kg. Used floor space approximately 20.000x6000mm, total weight approximately 62.000kg Auction-ID: A1-43459-7