129,384 used machines on RESALE, but how to find them? Machine Search
A used mobile Berchtold D530 surgical lamp unit packaged by the military in three Zarges boxes !
2 x model LAMVS, 1 x model LAMK presses, Machine nr. 0145720010, 0145720020, 0145720180, automated PCB multilayer lamination line designed for high throughput production with 2 x thermal-oil-heated vacuum laminating presses (LAMVS), 1 x hydraulic cold press (LAMK) for final cooling central Siemens SIMATIC PLC + HMI for line control; Heat Press - Pressing force kN 196 – 5,000, Max pressure 255 bar, Press area 750 × 1350 mm², Specific pressure on area 700 × 1300 mm², 549 N/cm², Piston diameter 500 mm, Nr. of plates 11, Plate thickness 35 mm, Nr. of layers 10, Layer spacing 110 mm, Piston stroke 1100 mm, Max. temperature 280 °C, Closing speed approx. 15 mm/s, Pressing speed approx. 1 mm/s, Hydraulic oil filling per press approx. 600L, Heat transfer oil filling approx. 110L, Max temperature 280 °C, Heating capacity 360 kW, Cooling capacity 320 kW Nordfils 900mm x 1500mm , NOTOMSCO c ...
KROENERT PACK 600 WITH TPC type KRA 250 water Chiller Coating and Laminating Machine PAK 600 For following operations: Wax Laminate / Coating - one sided 2 - 30 g/m2 Hotmelt Coating at temperature 10 - 40 g/m2 For the following materials: Unclad Aluminiumfoil 9 -150 my Flexible films like PE, PP, PVC, PVDC, PVA, Polyester and Polyamide films. Cellophane and cellulose acetate films Paper and material combinations. Max Mechanical speed V = 100m /min Realisable speed depending on material and application grammage. The Complete drive assembly was overhauled in 2016 for R 1.2 million.
Automatic pile feeder Heating cylinder with oil system Rotary knife for end sheet Table delivery Machine checked and cleaned, in good working conditions.
Buhler DMWP flake mill, 1000x600, complete with electric motor
Window rubber, cutting machine, gasket cutter, pneumatic lamellar cutter, blind cutting device -Lamellar cutter: for PVC and aluminum blinds, pneumatic -Manufacturer of pneumatic components: Festo -Dimensions: 680/340/H470 mm -Weight: 55 kg
Reconditioned Hotmelt Slot Nozzle machine for coating and laminating of various substrates. Winding/Unwinding on request. Overhauled, new Hotmelt slot nozzles - coating and laminating system. Up- and downwinding systems on request.
Horizontal laminar flow offer clean air to ISO class 4 for a particle free work environment. Working area: 1784 x 540 x 715 mm.
Reconditioned powder scatter coating and laminating line for thermoplastic powders. Working width 2 x 000 mm. New powder-spreading system for coating and lamination by means of thermoplastic powders. Working width 2 x 000 mm.
Laser lamp QCW245 incl. sealing rings MA-102181 larger quantities on request
Lamello Milling Machine Olma Stationary L x W x H: 1.0 x 0.7x 1.5 m Built in 1973 Weight approx. 350 kg The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Consisting of: 2x tripod, 2x lamp holder, 2x softbox. Auction-ID: A1-41275-163
Laminator - paper overboard Tùnkers Model S-1450 Year 1997 Working width 1450 mm Substrate Feeder automatic suction feeder Laminate Feeder by hand Details with pressing roll Delivery delivery on a table Condition can be purchased `as-is`or refurbished on most parts (ask details) Available Direct or very soon
Automatic Feeder & Delivery, Max. Speed: 45,7m/min, Min Size: 21,6x28cm, Max Size: 76,2x101,6cm, Feeder Capacity: 880 KG
Format range: 1400 x 1400 mm stack height 1300 mm Equipment: motorized format setting via remote control, pneumatic lateral alignment, Siemens control, Non-stop setup. Overhaul 2022: cleaned, tested, painted. Other: Stackers can be viewed in operation by arrangement.
Laminator Peak PP-450 HR; good condition; cleaned and tested; Working width 450mm; .max. Strength 350mic.; temperature range 100-160 C'; Speed 650mm/min.; Table unit. Laminating machine Peak PP-450 HR; good condition; cleaned and checked; working width 450mm; max.thikness 350mic.; temperature 100-160C'; Speed 650mm/min.; table top machine.
Mint condition, laminating width up to 1100mm, temperature 0- 14 degrees. Lamination thickness up to 13mm.
Automatic laminator machine1450 Automatic sheet feeder Automatic board feeder Automatic registration with servo motor Conveyor
Laminating machineSemi-automatic laminating system Hand-fed, but with automatic pneumatic overlap-feeding function with bursting system decurling device for completely flat results Re-winder unit – Gloss, Matt, Hologram, Metallic sleeking film Digital hot foil stamping – without cliché – purely digital – from quantity 1 Working width: 380mm Working speed: up to 10m/min. Freely adjustable laminating temperature (0-150°) Adjustable roller pressure, large chrome roller with a diameter of 100 mm Max. dimension: 380 x 1200 mm (table extension recommended from 600 mm) Min. size: 180 x 210 mm Paper thickness: 120 – 350g/m² LCD display with touch screen
Autobond Mini 105 TPHES - thermal laminator year 2008 2 sided Max. sheet size: 106 x 106 cm (41.73" x 41.73") min. sheet size: 28.5 cm x 32 cm (11.5" x 12.5") Max. speed: 60 m/min (200 ft/min) 115 gsm to 650 gsm Heidelberg Speedmaster feed head Good Condition
Auction-ID: A1-44832-857
Hours posted: • Total parts: ~304.891 • CN hours: ~38.237 h • Pump hours: ~30,291 h Tools supplied with the machine Delivered with its original tools , stored in separate boxes: • Original mandrels (see photos) • Jaw sets and various accessories Items excluded from sale • Machine-mounted tooling and mandrels not included • Irrigation vapour suction not included • Attachments delivered without tools Conditions and availability • Available from 11/05/2026 • Drop-off and transport to the yard truck included Additional information The Doosan PUMA Combination Turn-Mill MX2500ST Single-take turning and milling capabilities, ideal for complex parts. Equipped with a Fanuc 18i-T CN , a 24-tool Capto C6 magazine and with a BMT65P 12-station driven turret, it offers versatility and precision. The m ...
Manufacturer: MONTI ANTONIO Laminating-Coating Model: hot melt mod. 908 Type: Fleece and Foam LAMINATION & Coating with COATEM Foam make to inject direct to fabric for Coating. Working widh: 1800 mm Manufacture Date: 2003 (like new with new spare cylinder -hotmelt spareparts) With new spareparts Complete Modernisation in year 2016 with new electricity and software. description: working with SL1 Pleva weftstraitner go to 2 line Lamination Foam or fleece to Fabric
Universal luminaire Hera FD-4-E-ST 468 220 V 15 W used, tested ! Dimensions: 560 x 90 x 60 mm
Design by Marcel Wanders Auction-ID: A1-44654-263
Lampentester E. DOLD & SÖHNE AI 990/03 ( AI990/03 ) 0002061 New ! Dimensions: 85 x 45 x 120 mm
Brand Bottero Type Layered Cutting table Fashion model 301C Serial Number GG301C-5564 Construction year 1999 Weight 2.8 tons Assets 10.9 Kva Length mm 4900mm Width mm 3350mm Working height 930mm Transport dimensions L x W x H 420x240 cm + 480x100x160 cm Min.-max. glass thickness 3-10mm 33.1-66.2 Min.-max glass size Max length 3400mm Electric connection 380V Photos/film available: Photos and video available
maximum number of results exceeded
please refine your search
10 € 
