lam plan used for sale

Offered is a combined Weinig/Alfred Harbs planing and profiling line for woodworking. 1) Weinig Unimat 23 E planer/moulder, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 78A, main fuse: 80A, power: 34kW. 2) Weinig Uniplan fine finish/hydro planer, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 42A, main fuse: 50A, power: 17kW. 3) Weinig UC 10, year of manufacture: 1996. 4) Alfred Harbs K6V, year of manufacture: 1992. Including additional associated components and transport equipment. An on-site inspection is possible.

Nestro colour mist column - built in 2003 -Ideal for small and medium-sized businesses 4 swivel castors provide great mobility and easy handling 3 filter mats (will be replaced) ensure optimal filtration and a dust ejection of less than 3 mg/m³, according to TA Luft The built-in double-sided centrifugal fan is low noise, the high-performance impeller with a Efficiency of 82% is enormously economical (LxWxH)- 600x800x1200 mm Filter area - 1.5 m²

CURRENTLY I can offer you this HM 4 Industry planer from Hundegger. FREE Dec. 26 The high-performance plane from Hundegger! A used HM 4 planing machine from HUNDEGGER HM-400 2008 with the entire mechanization to the left and right of the HM4 planing machine for 16 m of timber lengths, as shown in the photos. 4 x 11KW planing motors. 4 x bevel unit. Fully automatic cross-section measurement Sale as seen from site in assembled condition without warranty and guarantee, without dismantling. Price 69,000 euros net

Four-sided planer Working height: 740-750 mm Max working width: 305 mm Min working width: 50 mm Max workpiece height on 2 sides: 310 mm Max workpiece height on 4 sides: 160 mm Min workpiece height: 17 mm Feed speed steplessly adjustable: 10-60 m/min motors: bottom 11 kW, top 11 kW, right 7.5 kW, left 11 kW feed motor: 7.5 kW motor height adjustment: 1.5 kW speed 5,500 rpm driven top and bottom feed rollers

max. ram stroke: - mm throat: - mm table diameter: - mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ex-proofed solvent preparation station made of stainless steel. The station consists of: -> 3 pcs. compressed air driven diaphragm pumps -> stainless steel solvent tank -> drip pan made by Denios -> ex-proofed agitator and stainless steel reactor -> stainless steel piping

The 6-station cleaning machine was part of a lens processing process. As an intermediate process, it took over the necessary cleaning of the transport containers, The cleaning process was carried out fully automatically from the loading station to the removal station. This function (station 1 and 6) can no longer be operated, because the systems conveyor belt is no longer available. - Station 2: post-cleaning with ultrasound in heated cleaning liquid. - Station 3: Rinsing with heated rinsing liquid, blowing off the residual liquid. - Station 4: pre-drying with heated air. - Station 5: Post-drying with heated air. - Control: Siemens SPS S7-200

15019533 - without coupling material - from foundation, no forklift, forwarding agent as loading aid can be requested for an extra charge. Auction-ID: A7-50458-177

Multihead weigher with automatic packaging machine. The plant is in mint condition. Viewing: by arrangement Material: Stainless Steel Bag length: 450 - 800 mm Bag width: 150 - 300 mm Weight of packing machine: 800 kg Packing speed: 30 - 70 bags/min Control: Siemens Smart Line Electr. Total power: 2.2 kW Total weight: 1,300 kg Disassembly: by buyer or on request

Defective, half-shell, 15005160 - without coupling material - Auction-ID: A7-50458-124

without furniture, 16000673 - without contents/furniture -16028472 from foundation, no forklift, forwarding agent as loading aid can be requested for an extra charge. Auction-ID: A7-50458-61

Defective, 22053891 from foundation, no forklift, forwarding agent as loading aid can be requested for an extra charge. Auction-ID: A7-50458-117

15019532 - without contents/coupling material - from foundation, no forklift, forwarding agent as loading aid can be requested for an extra charge. Auction-ID: A7-50458-176

Half shell, 15013548 - without coupling material and WITHOUT small kitchen- Auction-ID: A7-50458-51

With integrated T-slot for clamping Auction-ID: A1-50529-1022

Milk pasteurisation line of 8.000 ltr/h, used in a quark production factory. Line existing out of open level tank with lid (100 liter), product pump (Fristam), plate heat exchanger (Tetra Pak / Alfa Laval C6-SR, year: 2018, serial nr: 30108-17714, volume: 114 liter, pressure: 0 / 10.0 bar, temperature: 0 / 140 °C, 4 sections, number of plates: 156 in total devided in 48-16-48-48), holding tube in tank, booster pump (Fristam) system to get more pressure on the raw milk side compare to the pasteurised milk side and product and steam valves. Line CIP cleanable. Indirect hotwater set by heating of steam, closed loop with circulation pump (Fristam). Components available, no piping or controls for the pasteurisation plant itself., Addtional features:, - Was running together with the Rannie 50.79, #1598, .hamburg-machinery/listings/9063938-used-high-pressure-homogeniser-ran nie-blue-top-50-79. ...

Capacitynbsp;20 Ltr Dimensionsnbsp;685(H) x 473(W) x 525(D)mm Materialnbsp;Iron Aluminium Supplier Model Numbernbsp;A200N-B1E Voltagenbsp;230V Warrantynbsp;1 Year Weightnbsp;104kg Colournbsp;Grey Powerful 370W commercial motor Sturdy, easy-clean construction 20 litre strong stainless steel bowl with lever operated bowl lift Easy to use manual controls with timer Hobart planetary mixing action ensures all ingredients in the bowl are mixed Mounted on stand for stability and ergonomic use Supplied with dishwasher safe whisk, spiral dough hook and dough beater 10 litre bowl adaptor kit for smaller mixtures sold separately

CONTROLS   CNC controls SIEMENS 840 D SL HEAT TREATMENT COMPARTMENT / ZONE   length: 1000 mm   diameter: 36 mm HEAT TREATMENT COMPARTMENT / ZONE   heat treatment process: tempering   length: 1000 mm   diameter: 36 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 6700 mm   space requirements -front/back-: 7500 mm   total height: 3750 mm   total weight approx.: 20000 kg ELECTRICAL SPECIFICATIONS   total power consumption: 860 kW Accessories: e. g. base plate, exhaust system, tools, ... Operating hours: 7760 type stations / number: hardening 1x - Tempering 1x The machine is sold without workpiece programs.

Consisting of: a.o. 1 API SCHMIDT-BRETTEN - Sigma 16 TCN - Plate Heat Exchanger, 2 KPA - KN 253/ 4A - Pump, 1 ECKARDT - SRI 986 - Steam Control Valve, 1 safety changeover valve, 1 flow tank, 1 control cabinet, dimensions (LxWxH) approx. 510x800x200 mm Incl. stainless steel frame, The tanks in the background are expressly NOT part of the system The last 6 pictures show the separation points. Due to the increased dismantling effort, collection is by prior arrangement. Auction-ID: A1-50564-1

consisting of: a.o. Tubular heat exchanger, 10 mm diameter, single tube, 1 APV LAB 60/100 - high-pressure homogenizer, 350 bar, 100 ltr./h, rollable, dimensions (LxWxH) approx. 700x650x1020 mm, 1 GEA - VT 04 CDSC 16 - Plate Heat Exchanger, 1 Progressing cavity pump Allweiler type ASP 1 Grundfos High Pressure Centrifugal Pump, CRN, 1 DP - High Pressure Centrifugal Pump, 2 process vessels, 1 flow tank, 4 control valves 1 control cabinet with 3 frequency controllers Due to the increased dismantling effort, collection is by prior arrangement. Auction-ID: A1-50564-39

Second-hand Weinig Profimat 23 E automatic planing and moulding machine for four-sided planing and profiling of timber, with a long dressing table. Technical data: Spindle 1: Bottom / 4 kW / 40 mm Spindle 2: Right / 40 mm Spindle 3: Left / shared motor with #2 / 40 mm Spindle 4: Top / 5.5 kW / 40 mm Spindle 5: Bottom / 4 kW / 40 mm Spindles: 5 Working width: 230 mm Working height: 120 mm Feed: 2.2 kW Planing table length: 2,500 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Key data: 27 mm, 36 , 1200 U/min

Warehouse – No. 2875 1 used, in 2026 Partially overhauled and function-tested compounding granulation line, consisting of: Brabender grav. Dosage 2-components (expandable, optional vs. surcharge) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 control stand-alone Extruder Twin Screw Leistritz Type ZSE 27 HP Synchronous, seal-combing, segmental screw and barrel with intensive cooling. Screws 2x Ø 27 mm- 36 L/D with 8 cylinder zones with 3x degassing zones, 1x vacuum pump 1.5 kW Screw speed up to 1,200 rpm.-1 – adjustable Extruder drive 33.8 kW - Heating capacity 9.8 kW installed Mass pressure sensor Control Macromatex III MAAG Gala Underwater Pelletizer Type LPU Model SLC 5, incl. Polymer start-up valve with hydraulics Perforated plate 20°, granulator SLC 5 with drive 1.5 kW Water Box - Temperate water system with Granule Centrifugal Dryer Type 1150, Driv ...

working width: 510 mm; cutter head: strip knive; number of blades: 2; surface table length: 2600 mm; adjustment table: hydraulic; Hollow and pointed joints adjustment: ja; read out table hight: Scala; read out Hollow and pointed joints: Scala; fence tilting: yes; motor power: 5,5 kW; motor brake: yes, automatic; machine length: 2600 mm; machine width: 1000mm; weight: 1050 kg;

planing width: 520 mm; planing shaft type: tersa; number of blades: 4; sourface table length: 3000 mm; table adjustment: electrically; read out table height: digital; sourface fence adjustable: yes; motor power: 7 kW; suction connection: 120 mm; machine length: 3005 mm; machine width: 1460 mm; weight: 870 kg; - Dressing tables made of gray cast iron - The dressing table adjustment takes place via a precise parallelogram system, so that the distance between the table tips and - - the knife shaft remains the same in every adjustment position - Large precision aluminium dressing fence, slightly tiltable 90 - 45 ° - The inclination of the stop is easily readable from the operator side - As standard with auxiliary stop for safe planing of even narrow workpieces - Large four-knife shaft, precision-mounted - Quiet running with precision aggregate and heavy cast iron execution -  ...

working width: 180 mm; working height: 120 mm; working spindles: 4; spindle following: down, right, left, up; motor power spindle down: 3,7 kW; motor power spindle right: 3,7 kW; motor power spindle left: 3,7 kW; motor power spindle up: 5,5 kW; adjustment spindle down: -; adjustment spindle right: -; adjustment spindle left: manual; adjustment spindle up: electric; cutter heads: turn cutter; feed speed: 2; feed pressure: feather; current consumption: 38 A; motor brake: automatisch; suction connection: machine length: machine width: weight:

working width: 520 mm; working height: 250 mm; cutter head: strip-knive; number of blades: 4; height adjustment: electrically; read out workpiece thickness: scale; feed speed: 2 speeds; infeed roller: steel; outfeed roller: steel; table roller: yes; motor power: 5,5 kW; suction connection: 140mm; machine length: 1200 mm; machine width: 1400 mm; weight: ca. 900kg;

working width: 510 mm; maximum workpiece thickness: 250 mm; kutter head: Tersa; number of blades: 4; adjustment table: electrical; read out workpiece thickness: digital; feed speed: variable; feed roller: rubber; outfeed roller: rubber; table roller: no; motor power: 7,5 kW; suction connection: 160mm; machine length: 1200mm; machine width: 1200 mm; weight: 1000kg;

working width: 530 mm; cutter head: Leitz - Centrofix; number of blades: 4; surface table length: 2900 mm; adjustment table: Hebel; read out out table height: Scala; surface fence tiltable: ja; motor power: 4 kW; machine length: 2900 mm; machine width: 1000mm; weight: 800 kg;

working width: 500 mm; cutter head: Leitz - Centrofix; number of blades: 4; surface table length: 2800 mm; table adjustment: lever; read out table height: scala; sourface fence adjustable: yes; motor power: 5,5 kW; machine length: 2800 mm; machine width : 1000mm; weight: 900 kg;

working width: 500 mm; cutter head: strip knive; number of blades: 4; surface table length: 2700 mm; adjustment surface table: Hebel; read out: table height; fence tilting: yes; motorpower: 4 kW; motorbrake: yes, automatic; machine length: 2800 mm; machine width: 1000mm; weight: 1050 kg;

GE LM6000 PD Sprint, 46MW, 11,500v. 50 Hz. Natural Gas Turbine-Generator One (1) Complete Power Plant with an GE LM6000 PD Sprint, 46 MW ISO, 11,500v. 50 Hz. Cogeneration, Natural Gas Turbine Generator. Equipment Description Gas Turbine Generator Set: 2009 Manufactured/2021 engine exchanged - GE LM600 PD Sprint Triple annular combustor Condition: Engine exchanged by GE in March 2021 with factory refurbished unit. Last GE borescope (Dec. 2024) released the engine for operations, nevertheless, the engine is at the GE recommended HSE interval Generator: Brush BDAX 7-290ERJT - 50.8 MW/ 63.5 MVA, 11,500v. 50 Hz. 0.8 P.F. Gear Box: Lufkin NFVQ2419-D, ratio 1.209: 1 HRSG: DKME Korea DKS2107H01 - 52 t/hr. 103 barg, 313°C, single pressure, natural circulation Gas Booster Compressors: 2X Ariel JGC/4 NGBC-A 97,280 Hrs., NGBC-B 5,800 Hrs. Gas Circuit Breaker: ABB 4000A, 11 KV ...

Test sorting possible

Title: Artificial plant wall made of loose panels with illuminated VIP letters Description: Decorative artificial plant wall, made up of separate panels of approximately 30 × 30 cm. Easy to disassemble and reassemble. Including illuminated VIP letters, which can be removed if desired. Used and in neat condition. Auction-ID: A1-47447-422

Weinig Hydromat 23 industrial moulding machine for planing and profiling wood parts in professional production. Automatic feed machine for multi-sided wood processing and suitable for carpentry work and the production of profiles, mouldings and wooden elements. Equipped with a Weinig ATS control panel with digital display, various settings for the machining units, an adjustable feed system and pneumatic controls. Fully shrouded industrial construction with protective devices. Several top connections allow connection to a chip extraction system. Main equipment: Weinig ATS control with digital display Adjustable autofeed Multiple machining groups Pneumatic settings Entrance table Protective fairing Multiple suction connections Separate electrical cabinet 400 V power supply CE marking present Auction-ID: A3-46129-41035

Second-hand automatic planing and grooving machine, part of a Weinig Hydromat 2000 pre-planing line, with feed mechanism (tilting destacking). The machine has already been dismantled and is ready for loading. The images contain AI-generated sample images for illustrative purposes. The illustration may contain errors. Technical data: Spindles: 5 Spindle 1: Bottom / 11 kW / 50 mm / 6,000 rpm Spindle 2: Left / 11 kW / 50 mm / 6,000 rpm / Jointer Spindle 3: Top / 18.5 kW / 50 mm / 6,000 rpm / Jointer Spindle 4: Bottom / 11 kW / 50 mm / 6,000 rpm / Jointer Spindle 5: Right / 11 kW / 50 mm / 6,000 rpm Working width: 175 mm Working height: 80 mm Feed: 15 kW / 100 m/min Control: CNC memory system Max. workpiece length: ~ 6,000 mm Condition: Gebraucht Location: Prag, Tschechien

Design: modular containerized system, process: continuous pyrolysis/thermochemical carbonization, reactors: 2, feedstocks: wood/landscape maintenance material/biomass, thermal output: approx. 150kW, biochar production: approx. 300t/year, operating mode: autothermal, flue gas recirculation: available, burner: FLOX, discharge: water-cooled and airtight, degree of automation: fully automatic, control: Siemens S7-300, operator panel: Siemens TP1200 Comfort, automatic mode operating hours: approx. 7069h. Process container dimensions X/Y/Z: approx. 9000mm/3000mm/2800mm, process container weight: approx. 14t, flue gas treatment container dimensions X/Y/Z: approx. 3000mm/3000mm/2800mm, flue gas treatment container weight: approx. 4t. Including Bruns walking floor container with approx. 30m³ dosing hopper, inclined screw conveyor, bagging station and conveying spirals. A drying system for wood c ...

5-row planting trench puller – adjustable – 3-point – accessories Specifications: Plant trench puller / trencher Brand and type unknown Originating from fruit cultivation 3-point lifting connection Mounted version for attachment to tractor 5 separate planting trench/slot elements Trench body approx. 250 mm wide Height/depth trench body approx. 350–400 mm Heavy-duty steel main frame Fully mechanical design Suitable for fruit growing, tree nursery and other row crops Features: 5 separately laterally adjustable planting trench/slotted elements Elements with deep, shaped steel side plates Elements can be moved over the main frame beam Adjustable row/trench spacing Individual mechanical clamping per element Plastic box with various loose knives, tips, tool parts and other accessories, see photos Particularities: Used condition Visible signs of wear, ru ...

Number of spindles: 9 St. Working width: 240 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 7,5 kW Working speed: 6-36 m/min weight of the machine ca.: 6500 kg Control: CONTROL 100 PC PLUS SCM Topset XL, Year of Manufacture 2015, currently undergoing partial recondtionning in stock ------------------------------------------------------------ Summary: - 9 spindles (including 4 x HSK 85 S) - Electronic horizontal and vertical positioning - 8,300 rpm - SCM Set-up - SCM T-Set - Includes workpiece infeed magazine Working dimensions: - Maximum working width: 240 mm - Minimum working width: 25 mm (reducible to 15 mm via installed special kit) - Maximum working height: 120 mm - Minimum working height: 10 mm (reducible to 6 mm via installed special kit) Special working cross-section equipment: Equipped with a special kit for extremely small minimum cutting dimensions o ...

1.0 GML 1400 Planer Head Grinding Machine Fully automatic planer head grinding machine with variable carriage feed, automatic pitch and automatic delivery of the acceptance. TECHNICAL DATA Tool diameter: 160 - 360 mm Grinding length: 1,380 mm Graduation: (even number of blades) 2 - 40 Z additional 1, 3 and 5 knives selectable Grinding motor power: 1.0 kW Speed of the grinding wheel, adjustable: 3,000 - 6,000 rpm. • For grinding LEDINEK planing shafts as well as hydraulic planing heads, • Adjustable mounting brackets for shafts with different bearing distances, • Control console with 7.0" touch screen LENZE • Touch screen resolution (pixels) 800x480; Graphics, TFT Color • Input of the clearance angle α the planer blade via fixed value or calculates average β and γ, • Adjustable pressure on the guide ruler, • Dynamic calculation of the remaini ...

Manufacturer: J. A. Bäuerle Maschinenfabrik, Oberkochen Type: 125/02 Machine number: 53105388 Machine type: heavy thickness planing machine Working/planing width: approx. 610 mm Max. planing height: approx. 200 mm Planing shaft: strip knife shaft, Z4 Feed: approx. 7–14 m/min Engine power: 4.4 kW / 6 hp Engine speed: 2,870 rpm Electrical connection: 380 V / 50 Hz Rated current: 10 A Feed system: feed and pull-out rollers Height adjustment: mechanical via handwheel Extraction: Extraction hood/duct available Construction: heavy cast/steel construction Machine weight: approx. 1,150 kg Auction-ID: A1-50370-80181

Working width: 410 mm Length of the planing table: 1450 mm Number of knives: 4 St. Motor output: 4 kW Dimensions (L/W/H): 2650x850x1100 mm weight of the machine ca.: 750 kg SCM Surface planer F 410 N ----------------------------- Technical manufacturers description: Planing width: 410 mm Total table length: 2600 mm Table height: 855 mm Feed table length: 1450 mm Aluminum planing fence swivels up to 45° Planing fence dimensions: 1100 x 170 mm 4-knife planing shaft diameter: 120 mm Knife shaft speed: 5000 rpm Motor power: 4 kW TERSA monobloc one-way reversible cutterhead SCM dressing protection device integrated in machine stand 120 mm diameter extraction nozzle Manual star-delta switch Motor protection switch, undervoltage release Lockable main switch Automatic motor brake Pivoting auxiliary fence ----------------------------- Price of the above machine on request! ---------------------- ...

Number of spindles: 8 St. Working width: 230 mm Working height: 120 mm Weinig Planing and moulding line ------------------------------- Consisting of the following individual machines: Item 1: Weinig Profimat 23 E, four-side planer, stock number: 2803 5 spindles + glazing bead saw Item 2: Weinig Uniplan 23, stock number: 2804 Fine and hydroplaner with 2 horizontal spindles Item 3: Weinig RF 15, stock number: 2805 Longitudinal-cross-longitudinal conveyor with workpiece return to the operator Detailed descriptions of the machines can be found under the mentioned stock numbers. (Technical specifications according to the manufacturer, without guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 6 St. Working width: 230 mm Working height: 150 mm Length of the planing table: 2000 mm Feed motor: 5,5 kW Feed speed: 7-36 m/min. Kuper SWT 23 XL-6 Four-Sided Planer ----------------------------------------------- Machine fully functional tested! ... Working width min/max: 18 - 230 mm Working height min/max: 8 - 150 mm Spindle configuration: 1st Spindle - bottom ----------------------------------------------- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Pulley diameter: 160 mm Adjustment: axial and radial, manual 2nd Spindle - right ------------------ Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 160 mm Pulley diameter: min. 110 mm - max. 200 mm Adjustment: axial and radial, manual, via mechanical digital display Adjustment: vertical 35 mm below Table 3rd Spindle - Left -------------- ...

Number of spindles: 6 St. Working width: 230 mm Working height: 160 mm Feed motor: 4 kW Dimensions (L/W/H): 4400 x 1800 x 1500 mm WEINIG Unimat 23 Automatic Planing and Grooving Machine For sale on behalf of a customer -------------------------------------- Manufacturer’s Technical Specifications: Working width: 20–230 mm Working height: 6–160 mm Number of spindles: 6 Motor power per spindle: 5.5 kW (7.5 PS) Feed motor power: 4.0 kW (5.5 PS) Spindle speed: 6,000 rpm ------------------------------- ------- Planing table length: 2 m 1 adjustment gauge 2 planing heads, 240 mm 3 brake units are defective, these could be reinstalled by an electrician. -------------------------------------- Additional technical data (former order confirmation) attached -------------------------------------- Price of the above-mentioned machine upon request! -------------------------------------- (Technic ...

N. 06 INOX CRELL - MORE STEAM BRAND BABCOK WANSON

Jointer-planer on mobile base for corner assembly and precise planing of boards and slats. Automatic feeding, cast aluminium table, integrated suction. Condition: New, never used, in its original box. Features (plug optimachines.com): • Power supply: 230 V • Max. planing width: 305 mm • Jointing table length: 525 mm • Planer table length: 500 mm • Shaft diameter: 62 mm • Feed speed: 8.5 m/min • Shaft speed: 6700 rpm • Suction manifold diameter: Ø 75 mm • Dimensions (L x W x H): 1140 x 800 x 1075 mm – net weight 93 kg Supplied with: Suction connection hose, Ø 76 mm, length 920 mm, Reducer 100/75 mm, Blade set, Chip bag. Carton size: 121 x 57 x 58 (cm) Auction-ID: A1-50698-5

Tandem hot melt system with two dosing pumps for PUR hot melt adhesives. Well-maintained condition, from production. 400 V, 50 Hz; dosing pumps and control available. Auction-ID: A7-50729-103

Unused, On and including 1x pallet Auction-ID: A1-50447-67

Power: 1.5 kW malt mill; 40 kW kettle; 90 kW hot liquor tank; 0.75 kW wort pump; 2.2 kW hot liquor pump; glycol pump 1.5 kW Working parameters: nominal capacity 1000 L per brew; filter tank 1300 L total / 1000 L usable; kettle/whirlpool 1300 L total / 1000 L usable; hot liquor tank 3300 L total / 3000 L usable Parts capacity: 5 fermentation tanks 500 L usable / 650 L total and 2 fermentation tanks 1000 L usable / 1250 L total; working pressure 0.2 MPa (2 bar); cone 60°; Equipment included: 500 kg/h malt mill; 10 m² plate exchanger; 200 μm hop filter; 3 L dry hopping device; operating platform; piping; glycol tank 2200 L total / 2000 L usable; refrigeration unit 6 HP / 15000 kcal; CIP station with 2 tanks of 120 L gross / 100 L usable and pump 5 m³/h; bottle filler 6 heads 400–500 bottles/h; drum filler 30/h (30 L); drum washer 30–40/h (30 L); spare parts Compliance: CE certifie ...

Compact jointer-planer for jointing, planing and grading solid wood. Automatic feed via rubberized rollers, tilting side fence 0–45°, 2-blade shaft. Condition: New, never used, in original carton. Features (optimachines.com plug): • Power supply: 230 V • Max. planing width: 204 mm • Max. planing height: 120 mm • Max. pass depth: 2 mm • Jointing table length: 737 mm • Feed speed: 7 m/min • Shaft speed: 8500 rpm • Suction tubing diameter: 58 mm • Dimensions (L x W x H): 790 x 470 x 465 mm – net weight 29 kg Carton size: 82 x 53 x 44 (cm) Auction-ID: A1-50698-4