lam plan used for sale

Weinig Unimat 23E automatic planing and profiling machine for four-sided planing and profiling of timber, featuring a mobile spindle for automatic adjustment and a grooving bed (optionally available without the grooving bed) for short and curved workpieces, as well as a long dressing table. Technical data: Optional: Conversion to a conventional smooth table, on request. Spindles: 5 Spindle 1: Bottom / 40 mm / 5.5 kW Spindle 2: Right / 40 mm / 7.5 kW Spindle 3: Left / 40 mm / Shared motor with spindle 2 Spindle 4: Top / 40 mm / 7.5 kW Spindle 5: Bottom / 40 mm / 5.5 kW Working width: 230 mm Working height: 160 mm Feed: 4 kW / 5–24 m/min Condition: Gebraucht Location: Tauberbischofsheim, Germany

Bäuerle Type 125/02 heavy-duty thickness planer for the precise sizing (thickness planing) of solid timber and wood-based materials. The robust construction and powerful drive ensure consistent planing results and a long service life. Accessories included. Technical data: Planing width: 610 mm Planing height: 200 mm Planing shaft: Z4 strip planing blades Feed speed: 7–14 m/min Motor power: 4.4 kW Weight: approx. 1,150 kg Condition: Gebraucht Location: Tauberbischofsheim, Germany

planing lenght: 625 mm planing width: 570 mm total power requirement: 3 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 2,4 x 1,4 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4 , 230 mm, 150 mm

Four-sided planer Weinig Type: Q 22 Quattromat Year of Make: 1990 Planing width 230 mm Planing height 150 mm Length of dressing table 1960 mm 4 shafts: 1 Bottom 4 kW 2 on the right and 3 left driven by 1 motor 5.5 kW 4 above 5.5 kW Feed speed 6 - 22 m/min. Feed cardan, feed motor 2.2 kW Lubricant pump manual With soundproof hood Including planer heads 2 pieces length 230 mm 2 pieces length 150 mm Weight with substructure 1,620 kg Dimensions 3350 mm x 1450 mm x H 1600 mm

1) Four-stroke engine Jenbacher J 612 GS-J03, operating hours: under 15,000h, ISO standard output: 2,058kW, design: V 60°, number of cylinders: 12, bore: 190mm, stroke: 220mm, displacement: 74.85l, input power: 4,474kW, mixture: 692kW, oil: 204kW, engine cooling water: 315kW, exhaust gas when cooled to 180°C: 638kW, exhaust gas when cooled to 100°C: 909kW, surface heat: 79kW, rated speed: 1,500/min, moment of inertia: 56.67kgm², direction of rotation (viewed from flywheel): left, radio interference suppression level acc. to VDE 0875: N, starter power: 13kW, starter voltage: 24V, mean piston speed: 11m/s, length: 4,246mm, width: 1,886mm, height: 2,503mm, engine dry weight: 9.5t, engine operating weight: 10.3t, 2) Generator Stamford LVSI 804 W, rated output: 2,643kVA, drive power: 2,058kW, rated active power cos φ=1: 2,004kW, rated active power cos φ=0.8: 1,986kW, rated apparent powe ...

Leybold Vacuum Casting Resin System VGH 1000 Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Weinig Profimat 23E four-sided planer Working width 230mm Working height 120mm Number of spindles 6 Down 7.5kw 7.5kw rights Left Mount 7.5kw 11kw pit Universal 5.5kw Spindle diameter 40mm Working speed 24m/min Pneumatic pull roller clamps Electric pressure beam adjustment Input table length 1970mm Table top lubrication system Year of manufacture 1999 Machine dimensions 420x180x189cmH Machine Weight: 3200kg

Window suspension conveyor Tiger Surface area on the ceiling approx. 8.50 m x 3.20 m 20 hooks with 2 points already dismantled and ready for loading Shipping Dimensions 1 pallet 2800 mm x 800 mm x H 500 mm Weight 119 kg 1 pallet 1200 mm x 800 mm x H 600 mm Weight 120.5 kg

A PUR foaming system with Yaskawa industrial robot is offered. Min. dispensing rate: approx. 0.15g/s, max. dispensing rate: 1.6g/s, material system: polyurethane Penguin Foam 3151/3157, drum capacity: 200l, operating voltage: 3 × 400V/N/PE, frequency: 50Hz, control voltage: 24V DC, upstream fuse: 16A. Approx. 30000 assemblies were foam-applied using the system. The system was shut down in 2024 according to the manufacturers instructions. Documentation available. An on-site inspection is possible.

AGICOM recycling machine trade: Used eddy current separator Eddy Current from Goudsmit

Description Item # 9371 - VERTICAL PLANETARY MIXER Manufactured by TONELLI Model M800 Year 2006 415Volts, 50Hz 800Kgs Mixer Comes with Two(2) Bowls Comes with ingredient handling batching hoppers for flour & sugar, Valves & flow meters for water, oil, egg or other ingredients Mixer control panel has integrated batching control, recipe control, fully programmable controlling mixing from start to finish Also with TONELLI Lifter 800litres Bowl Lift System with control panel Model EOV800 Year 2006 415Volts, 50Hz Currently set for 6metres high dough lift, can be adjusted

Technical data: Dimensions and weight Width of the machine: 2230 mm Length of the machine: 2400 mm Weight of the machine: 1550 kg approx. Performance 0 – approx. 55 m / min, endurance run. Cycle operation power / hour depending on the operator. Up to 2,000 pcs/hour depending on packaging Drive Belt press belt 1 x 0.75 kW Noise 70 dB (or less) Connection 3 x 400 V, 25A, 50 Hz, powered by the LUNEX basic machine. Compressed air None Formats Min. width approx. 60 mm depending on the packaging Min. length approx. 150 mm depending on the packaging Max. width 1600 mm (= passage width) Max. length in principle not limited Material All formats depend on the nature of the packaging. Dimensions are valid for folded blanks. Motor Glulam Bridge Lenze Type: MDXMA2M080-32 (IP 55) 50/60 Hz 0.75/0.92 kW 400/230 V 1.90/3.30 Amp.

Format lamination line / lamination line / laminating machine Make Fetzel Type SOVA1 Total power 8 KW Compressed air 6 bar / 250 l/min. Lamination width up to 400 mm Total length 4000 mm, total width 1100 mm, total height 1800 mm With 3 winding/unwinding rollers at the start, heated laminating roller at the top and bottom, laminate winding and protective paper unwinding at the end. Various measuring rollers and deflection rollers. With documentation.

Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specially designed for the precise, process-reliable cutting of stainless steel pipes (e.g. for fuel, brake, air conditioning or hydraulic lines). The system has optical laser marking detection. The control panel can be used to choose whether the cut is triggered mechanically (e.g. on the back of a union nut) or fully automatically via the optical detection of a laser mark applied to the tube. Thanks to the integrated rotating 3-jaw cutting head and a micro spray unit (minimum quantity lubrication), machining is extremely gentle on the tool. The pipes remain almost completely dry and free of coarse dirt. The entire process from insertion to clamping, separating and depositing is highly automated in a material-friendly cycle process. Fully integrated ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. control: Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ---------------------------------------------------------------------- - The machine renovated and functionally checked ! Short summary: ---------------------------------------------------------------------- - 6 spindles with 8,000 rpm 5 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control CNC - controlled adjustment and positioning of the feed Detailed description: ---------------------------------------------------------------------- - Technical specifications: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 6 1. Tool holder - below ------------------------------------------------ Motor with brake: 5.5  ...

Number of spindles: 5 St. Working width: 230 mm Working height: 160 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min. Control: K2 Basic 7-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ------------------------------- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carriage motorized adjustment TECHNICAL DATA in Detail ------------------------------- Working width (for tool diameter 125-163 mm): 15-230 mm Working height (for tool diameter 125 mm): 10-160 mm (Tool diameter up to 163 mm): 10-160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter  ...

Number of spindles: 5 St. Working width: 240 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 6-36 m/min. Weight: ca. 3500 kg control: SCM Control 10 SCM Superset NT with workpiece return ---------------------------------- The machine is in cleaning and completely checking process at the moment. Brief Summary: ---------------------------------- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height - With workpiece return to the operator 1st spindle ---------------------------------- First lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm 2nd spindle ---------------------------------- First right vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system 3rd spindle ---------------------------------- First left vertical spindle Motor with bra ...

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Memory-Funktion Weinig Powermat 600 Compact ---------------------------------------------------------------------- The machine has been cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----------------------------------------------- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine  ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min. total power requirement: 27 kw Dimensions (L/W/H): 3900 x 2200 x 2000 mm weight of the machine ca.: 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ------------------------------------- Machine will be renovated and functionally checked! Technical data summary (please inquire about any additional accessories included) ------------------------------------- Generally ------------------------------------- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ------------ ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min. Dimensions (L/W/H): 3900 x 2200 x 2000 mm weight of the machine ca.: 2500 kg Weinig Profimat 23 Four-Sided Planer – Window Version (With glazing bead separation feature, or usable as a grooving spindle) ATS Control and Program Control ------------------------------------- Technical Specifications Summary (Please inquire regarding any additional accessories that may be included) ------------------------------------- General ------------------------------------ > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Infeed table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight (approx.): 2500 kg Spindle Arrangement ---------- ...

Manufacturer: Normet Model: Norrunner Type of machine: Concrete spraying machine Year of manufacture: 2017 Power: 425 kW Total weight: 31720 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

TBA 19 20 V 125 Slim complete line in excellent condition. PLC upgraded to RX3i TSA 21 2003 Multi Shrink Carton Sealer Manual Conveyor Hours: 68632

Number of spindles: 6 St. Working width: 240 mm Working height: 200 mm Length of the planing table: 2500 mm Feed speed: 6-36 m/min. Dimensions (L/W/H): 4900x1700x2000 mm weight of the machine ca.: 3500 kg Control: SCM Mobile 10 SCM Superset NT PLUS Comp. 31 for window production ----------------------------------------------- The machine is in process of partial reconditionning at our facility at the moment. Highlights: - Machine with 6 spindles (2 with HSK mounting) - Spindle speed 8,300 rpm - Working width 240 mm, working height 200 mm - Electronic horizontal and vertical spindle positioning - PRL equipment for glazing bead separation - Air-cushion table - Touchscreen control Technical Data: Working width: max. 240 mm (kit for min. width 15 to 25 mm) Working height: max. 200 mm Feed speed: infinitely variable 6 to 36 m/min via inverter Infeed table: length 2,500 mm Machine weight: app ...

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. control: Memory-Funktion Weinig Powermat 500 with grooved table ---------------------------------- The machine arrives at the warehouse and is cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - 8,000 rpm - Grooved table for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller in the outfeed table, hardened: 210 mm wide - Left and top spindles controlled for width and height - Quick-release spindle nut Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st Spindle - bottom ----------------------------------------------- Motor with ...

Weinig Unimat 300 four-sided planer Working width 230mm Working height 120mm Number of spindles 5 Spindle layout: 1.Down 5.5kw 2.Left 3.11kw rights 4.Top 5.5kw 5.Down 4kw Feed speed adjustable by inverter up to 12min/min Pneumatic Clamps Net price

TBA 19 200 slim line with HI kit was producing 180 ML Hours 65238 PLC upgraded to RX3i TSA 21 2004 Multishrink Conveyors

Year of Make: 1980 Working width: 860 mm Working height: 250 mm Working height 4-sided: 230 mm Number of Spindles: 4 Spindle arrangement: u-o-r+l Spindle diameter: X-X-50-50 mm Counter bearings: 1-2 Motor powers: 11-15-5.5-5.5 kW Working width adjustment: manual Working height adjustment: motorized Feed: 4 Driven rollers in the table: 3 Top feed rollers: 3 Table height constant: approx. 800 mm Weight: 4850 kg Voltage/Frequency: 380V 50Hz 3Ph

used aseptic filling line SIG-COMBIBLOC, Type CFA 310-32, built in 2004. Capacity: 10,000 E/h Packaging type: C3, (1ltr. slim) Included: - Automatic unpacker and feeding of blanks - Closure applicator - Tray packer - Vertical buffer - Various conveyors - Control cabinets, etc. Dismantling by the buyer Location: EU country

Number of spindles: 5 St. Working width: 250 mm Working height: 150 mm Length of the planing table: 2000 mm Feed motor: 4 kW Feed speed: 6-24 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Polin K160D Planetary mixer 2020, with three 160L stainless mobile bowls, stainless beater, whisk and dough hook attachment, variable speed, with safety guard, 3Ph

Planing width: 410mm, working height: 3mm-240mm, max. stock removal: 5mm, feed speed: 12m/min, thicknessing table X/Y: 775mm/423mm, extraction port diameter: 120mm, operating hours: approx. 350h, weight: approx. 361kg. Equipped with 4-knife TERSA cutterblock for quick knife changes without adjustment or screws, solid gray cast iron thicknessing table with 4-column guide on four large spindles, integrated lifting device for a stable table position without additional locking, manual thicknessing table adjustment with numerical readout and reading accuracy of 1/10mm, helical-toothed steel infeed roller for gentle stock removal from 0.2mm and satin-finished steel outfeed roller. The machine is currently in storage.

x-travel: 3.500 mm y-travel: 2.600 mm z-travel: 1.000 mm Control: HEIDENHAIN iTNC-530 table-size: 4.500 x 1.500 mm table weight: 15.000 Kg distance between columns: 2.300 mm rapid travel x/y/z: 15/12.000 mm/min feed: 5 m/min milling head: Automatic Orthogonal UAGA milling head swivable ca.: 2,5 x 2,5 ° spindle turning speed range: 3.000 U/min spindle drive: 22 kW transmission ratio: 2 tool taper: ISO 50 Tools changer: 30 fach/tools handwheel: HEIDENHAIN HR 410 total power requirement: kW weight of the machine ca.: 28 t dimensions of the machine ca.: m - Direct-Drive Spindle Head - Direct-Drive Spindle Speed 5,000 rpm - Automatic Retractable Support on the Right Side for Orthogonal UAGA Head - Automatic Retractable Support on the Left Side for Direct-Drive Spindle Head - Cover - Automatic Head Clamping The data for this ad was created with ModulMWS - the software solution of LogoTec ...

x-travel: 8000 mm y-travel: 1250 mm z-travel: 1250 mm table-size: 1250 x 8000 mm workpiece weight: 40 t spindle travel: 240 mm max. passage: 1600 mm spindle taper ISO: 50 total power requirement: -- kW total wight: -- t dimensions of the machine ca.: -- m overhauled in 2007 and equipped with digital display - 2 milling supports - 1 side support The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

UK Power Generators Ltd have in stock the container for the generators to be inserted and perform their energy production operations. Manufacturer: Jenbacher Ideal for Jenbacher 320,316, 314 …. 312 series generators Available for sale… The empty container with highly specialised flooring and walls considering the equipment to be installed in there. The container pictures are attached to this advert, as seen. Everything inside the empty container. Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to contact us today to get a quote.

Water Distillation Plant for WFI Water Manufacturer : Kemiterm Type: 1000MS-6 Technical specifications : low pressure 5/3 bar high pressure 8/5 bar Temperature 100 °C / 85 °C GMP Distillation capacity up to 2200 l/h Documents: available

Total of 2 pieces, Unused, Item No.: 12651380540, Type: 66-12-IK-Z6, further details see photos

Total of 3 pieces, Unused, Item No.: 12651380520, Type: 52-12-IK-Z4, further details see photos

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ---------------------------------------------------------------------- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ---------------------------------------------------------------------- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----------------------------------------------------------------- ...

Weinig Profimat 26S four-sided planer Working width 230mm Working height 130mm Number of spindles 6 Spindle system Down 4kw Rights Left 7.5kw 5.5kw rights Top 5.5kw Down 5.5kw Electronic adjustment of the height and width of the workpiece Feed speed adjustable by variator 5-24m/mi CE Certificate Technical documentation

AGICOM recycling machine trade: Used eddy current separator Eddy Current from Goudsmit. The Eddy Current non-ferrous separator is intended for the separation and recovery of non-ferromagnetic metals (e.g. aluminium and copper) from non-adherent material streams. The separation process of the Eddy Current non-ferrous separator is based on the so-called "eddy current principle". When electrically conductive materials are exposed to a rapidly changing magnetic field, current is induced. Such eddy currents create a magnetic field that is opposed to the changing magnetic field of the magnetic roller (the output magnet). Electrically conductive particles passed over such a magnetic roller are therefore repelled by the changing magnetic field. The non-electrically conductive materials fall off after passing through the magnetic roller. The separated non-ferrous parts and the cleaned mat ...

ABH Chico (Beuving) Planer Manufacturer: ABH Type: Chico A3 YouTube:

Martin T52 Jointing planner Brand: Martin Type: T52 Year: 1986 M. Nr: V144098 Motor: 5,5 kW (7,5HP) Cutterhead speed: 5.000 tpm Cutterblock: Z-4 Tersa Diameter of cutterhead: ø125 mm Jointing width: 500 mm Cutterlenght.: 510 mm Max. depth of cut: Praxis 16 mm, footpedal table height setting with counter in table (Health Safety regulations limited to 8 mm) Length of Table: 2840 mm Length of infeed table: 1640 mm Length of outfeed table: 1200 mm Table Height: 800 mm Fence: 1.100 165 mm Fence-tilting: 45° Weight: ca. 950 KG

Martin T54 Planer Brand: Martin Type: T54 Year: 2018 M. Nr.: V555076 Control: Electric with digital reading mobile control panel Motor: 5,5 kW Cutterhead speed: 6.000 rpm X-Plane Diameter of cutterhead: ø125 mm Safety: Suvamatic bridge guard Width: 500 mm Fence: Aigner edging fence with thin workpieces fence Max. depth of cut: 8 mm Length of table: 2.850 mm Infeed table: 1.640 mm Outfeed table: 1.200 mm Table height: 850 mm Weight: ca. 1.400 KG

MARTIN T90 4-side planer with 2-axes NC-control, Tersa Z-4, and pendular spindel Specifications:: Manufacturer: MARTIN Type: T90 Year: V415883 M-Nr.: 2000 Infeed table: 2000 mm Botom spindle-chip removal: Max. planing dept: max. 10 mm L & R vertical spindles-chip removal: Max. planing dept: max. 10 mm +12 mm profiling Top spindle-chip removal: Max. planing dept: max. 10 mm + 8.5 mm profiling Planing width: 12 – 260 mm; max. 10 mm chip removal either side Planing thickness: 8 – 160 mm; max. 10 mm chip removal either side Profiling dept: Vertical spindels 2 & 3: max. 12 mm Horizontal top spindel 4: max. 8,5 mm Thickness setting: NC control programmable or manual electric setting with digital display Width adjustment: NC control programmable or manual electric setting with digital display and automatic width adjustement (pendular spindle) Dimensions: 100 Programs storage Cutterheads: Bo ...

MARTIN T90 4-side planer with 2-axes NC-control, Tersa Z-4, and pendular spindel Specifications:: Manufacturer: MARTIN Type: T90 Year: V220501 M-Nr.: 1995 Infeed table: 2000 mm Botom spindle-chip removal: Max. planing dept: max. 10 mm L & R vertical spindles-chip removal: Max. planing dept: max. 10 mm Top spindle-chip removal: Max. planing dept: max. 10 mm Planing width: 12 – 260 mm; max. 10 mm chip removal either side Planing thickness: 8 – 160 mm; max. 10 mm chip removal either side Thickness setting: NC control programmable or manual electric setting with digital display Width adjustment: NC control programmable or manual electric setting with digital display and automatic width adjustement (pendular spindle) Dimensions: 100 Programs storage Cutterheads: Bottom: Tersa Z-4, ø125 mm Right&Left: Tersa Z-4; diam. ø125 mm Top: Tersa Z-4;diam. ø125 mm Min. product length: 380 mm Cent ...

MARTIN T90 4-zijdige schaaf en profileersautomaat met 7 schaafassen, NC gestuurde hoogte en breedte verstelling Spezifikationen: Manufacturer: MARTIN Type: T90 Profil with 6 spindels (Optional 7 spindels) Year: Completely rebuild and resprayed Infeed table: 2000 mm + 1.000 mm extension Infeed tabel height adjustment: Max. planing thickness 10 mm Infeed fence: Max. planing thickness 10 mm Planing width: 12 – 240 mm (260 mm possible when using axial hollowed tools) Planing thickness: 8 – 170 mm Planing spindle: Spindele 1 – horizontal max. 12 mm, 240 mm nett working width, tooldiam. Min. ø100 mm – max Ø125m ø100- max. ø125 mm Planing- / Contour spindels: Spindels 2 & 3: Vertical spindels max. 12 mm, working height max. 170 mm, tooldiam. min. ø125 mm ø125 mm Profiling spindels: Spindle 4: Horizontal spindel max. 8.5 mm, working width 240 mm, tooldiam. Min. 100 mm – max. Ø12 ...

Martin T52 Jointing planner Manufacturer: Martin Type: T52 Year: 1988 Machine Nr: V 155643 Motor: 5,5 kW (7,5HP) Cutterhead: 5.000 rpm Z-4 Tersa Diameter of cutterhead: ø125 mm Working width: 500 mm Cutterlenght.: 510 mm Planing dept: 8 mm (max. allowed by law, but technically upt 16 mm) Length of Table: 2840 mm Length of infeed table: 1640 mm Length of outfeed table: 1200 mm Table Height: 800 mm Fence: 1.100 165 mm Fence-tilting: 45° Weight: ca. 950 KG Condition: Fully functional

Martin T52 Jointer/planner Manufacturer: Martin Type: T52 Year: 1987 Machine Nr: V 151674 Motor: 5,5 kW (7,5HP) Cutterhead: 5.000 rpm Z-4 Diameter of cutterhead: ø125 mm Working width: 500 mm Cutterlenght.: 510 mm Planing dept: 8 mm, footpedal table height setting with counter in table Length of Table: 2840 mm Length of infeed table: 1640 mm Length of outfeed table: 1200 mm Table Height: 800 mm Fence: 1.100 165 mm Fence-tilting: 45° Weight: ca. 950 KG Condition: Fully functional

MARTIN T90 4-side planer with 2-axes NC-control, Tersa Z-4 Specificaties: Manufacturer: MARTIN Type: T90 Year: 1992 – 2005 Infeed table: 2.000 mm Infeed tabel height adjustment: Max. planing thickness 10 mm Infeed fence: Max. planing thickness 10 mm Planing width: 12 – 260 mm (width automatic width adjustement) Planing thickness: 8 – 160 mm Profiling dept: Vertical spindels max. 12 mm Horizontal spindels max. 8,5 mm Thickness setting: NC control programmable or manual electric setting with digital display Planing width: NC control programmable or manual electric setting with digital display and automatic width adjustement Programms: 100 Programs storage Cutterheads: Bottom: Tersa Z-4, ø125 mm Right: Tersa Z-4, diam. ø125 mm Left: Tersa Z-4, diam. ø125 mm Top: Tersa Z-4, diam. ø125 mm Min. product length: 380 mm Central control: NC- Control with LCD display Greasing: Automatic t ...

Auction-ID: A1-50229-71