lam plan used for sale

WEINIG Quattromat Q23P, S/N 86825, YOC 1999 Machine with full fairing and integrated sound and dust protection. Technical data: Planing width: min. approx. 13 mm / max. 230 mm (with 125 mm flight circle) Planing height: min. approx. 6 mm / max. 120 mm (with 125 mm flight circle) Feed: 8 m/min., feed motor 1.5 KW Spindle sequence: 1. Spindle at the bottom, motor 5.5 KW 2nd spindle right (joint) / 3rd spindle left, motor 7.5 KW 4. Spindle top, motor 5.5 KW Spindle diameter D = 40 mm Accessories/Extras: Dressing table 2000 mm with joining ruler (adjustment range 10 mm) Folding device with joining seam cutter Manual Wax Pump Pneumatic pressure of the feed rollers Feed roller in front of dressing pneumatically timed Central position of the lubrication points at the front of the machine SICO Counters Set of planer heads WEINIG Centrolock 533 Operating instructions,  ...

For sale: a complete waste recycling plant, fully equipped with automated sorting,shredding, separation, and material recovery systems. Overall Process Summary 1. Feeding and battery detection (WeSort AI) with pre-shredding and screening 2. Ballistic separation into flat fraction, rolling fraction, and fines 3. Multiple NIR sorting stages (P2000 / PV2000 / P2800) for PVC, EBS, Wood, PP/PS/PE/EPS 4. X-Ray mineral sorting, ISS Eddy Current separation, Zig-Zag air classification, overband magnets, flip-flow screening 5. Post-shredding with Lindner Komet and SRF dosing with secondary shredding 6. Final SRF/EBS discharge with ferrous and reject handling 7. Manual sorting cabin with dust extraction (Schuko filter system) 1. Feeding and Pre-Treatment - Feeding crane - Feed bunker - Intermediate feed conveyor and screen feed conveyor - Screen and screen discharge conveyor - Analysis  ...

Buderus combined heat and power plant EN20 Bosch KWK System GmbH Lollar CHP module / chip modules Engine VW 2.0L CBS Natural Gas Power output 19 KW Generator KOEZIE 225/4 Thermal power 34 KW with 1000 litre tank hot water Stainless steel chimney etc Available now! Tel. 01715213204

Glass Bottle Filling Line 1000 bph With Isobaric CICE Careddu Filling Block This CICE Careddu GOLD DPS 6/6/1C is a compact rotary triblock bottling machine integrating 6 rinsing stations, 6 isobaric filling valves, and 1 crown capping head for hygienic packaging of beer in glass bottles. The system ensures controlled counterpressure filling to with air pre-evacuation with CO2 maintaining carbonation and minimizing oxidation during the bottling process. Filling block has Siemens S7 PLC control system. Filling bloc has CIP system for sterilizing equipment inside and outside with 85C hot water. The line contains also rotating infeed table where empty bottles are manually places, CICE Careddu Compatta labelling station for self-adhesive labels. It has a one roll fed label station and it is intended for the application of one label per product, typically used for front labelling, iden ...

Sangati plansifter with standard frame 8 passages 3 x B1, 3 x B2, 2 x C1, Rebuilt using the previous. Screen stack, new inlet benches, new outlet nozzle with rubber lid and 32 GRP rods ø 12 mm (red) - 3.6 m long.

Plansifter BUEHLER MPAQ 210 with frame, old housing suspension with only 8 rods Bearing shaft bearing and WDR renewed

Key data: 5 , 300 mm, 125 mm

Four-sided planing or pre-planing machine Right machine, operation left The machine is especially suitable for planing and pre-planing slats. The floating vertical units in lightweight construction are optimally designed for the processing of curved goods. Short set-up times and fast dimension changes are made possible and guaranteed by the flexibility of the machine. The machine has 5 working spindles, with the following arrangement: [1] [2] [3] 1. Horizontal Down 2. Horizontal top 3. 4. Vertical left/right ( opposite ) 5. Scoring saw at the bottom TECHNICAL DATA Work dimensions Working width: 50 - 300 mm() Working thickness: 30 - 125 mm Working length: min. 1,800 mm Table height: 1,100 mm Feed speed: 50 - 250 m/min. Working thickness up to 160 mm possible with appropriate tools on the vertical spindles. Minimum planing width 50 mm possible with tool D≥250  ...

A compound feed line is available. 1) Bühler hammer mill. 2) Bühler DPAB pellet press, year of manufacture: 1979. 3) Loos rapid steam generator, year of manufacture: 2000, capacity: 300kg/h, max. operating overpressure: 13bar. 4) Gebrüder Jensen weighing and mixing unit, year of manufacture: 1979. Production capacity range: approx. 5-10t/h. Including the associated drag conveyors and bucket elevators. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible.

consisting of: base frame, 2 storage containers, stainless steel, tank container, Fabr. WERIT, osmosis unit, type: SILHORKO, built in 1995, control cabinet system, Fabr. RITTAL, with piping system, filter, pump and valve technology as well as 2 tipper bodies, wheeled

PAPER CARTON SORTER good condition Available now! cheap to give away

2 units air classifier type Nihot - 2 x 2 pieces blower - 2 x 1 piece airlock cheap to show off

TECHNICAL DATA: Usable width: 400 mm Installed power: 1.5 hp

An essential ingredient for removing impurities from the material. With a specially developed rotor with replaceable blades, high friction is generated at the target fraction and thus ensures thorough cleaning. Maintenance hatches on both sides allow easy access to the interior. The housing and the screens underneath are made of stainless steel. A support frame is included as well as inlet and outlet nozzles for the water. More information on request!

Professional organic waste recycling and fertilizer production line available for immediate sale.This complete installation is designed to transform poultry, cattle, or pig manure and organic waste into high-quality granulated organic fertilizer pellets. EcoCert compliant output. Produced in 2022. Fully operational and well-maintained. Technical Specifications - Capacity: up to 5 tons per hour - Condition: Fully operational, well-maintained - Year of Production: 2022 - Output: High-density organic pellets, EcoCert compliant Complete Production Process Compost Processing - Grinding - Mixing with Probiotic and Additive injection capability - Granulation - Drying - Cooling - Automated Packaging Applications - Poultry manure processing - Cattle manure processing - Pig manure processing - General organic waste recycling Key Investment Benefits Fast ROI: Converts waste management cost ...

Key data: 4 , 600 mm, 300 mm

FINAL PLANING LINE FOR STRAIGHT GLULAM PRODUCED BY LEDINEK => EUROPLAN 600-4V+4F S60 WITH INFEED AND OUTFEED MECHANIZATION Orientation: right machine This four-sided heavy-duty planer for timber was specially designed for planing of constructional timber and glulam beams. The machine is suitable for green as well as kiln dried timber. Machine is equipped with hydro cutterheads. The adjustment of cut off on the first cutterhead is motor driven. Set value is shown on operational panel. One’s desired thickness is set through an adjustable top unit with second cutterhead, the adjustment is motor driven with spindle lift mechanism in 6 columns with 120 mm diameter. The set thickness is shown on operational panel. The vertical units enable good clean surface or profiling. The machine has two opposite vertical floating heads (float up to 40 mm) so they can adjust to the curvature ...

Stock number: D1240, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: RO plant, Standing: In stainless rack, Dimensions: L 720 x W 650 x H 1700 mm., Capacity: 500 l/h, Manufacturer: HOH Best Water Technology, Type: Duo 2020, Model: RO 2-Pass 500, Documentation: Yes

Used green bean slicer from the French company Femia type C 32. The machine cuts beans to a length of 26.32 or 36mm. Cutting length capacity 2-2.5 T/h. Acid-resistant design. 5 pieces available.

Used Stone Making Line Year of Make: 2006 Consisting of: - Attachment mixer: Kniele 0.5m³ - Core concrete mixer: Kniele 2m³ - 6-fold inking system (granules), make Finke - Hess Stone Paver Multimat RH 1500-2A including R&W Height Measuring Station SHV-500 - Hess transfer table - Rotho – drying chamber - Complete dry side with packaging system - 3,000 pieces Assyx underlay boards 1400x1100x50mm Used block-making, block-production, paver production plant Year of manufacture: 2006 Consisting of: - First layer mixer: Kniele 0.5 m³ - Core concrete mixer: Kniele 2 m³ - colouring system with 6 colors (granulate), Finke brand - Hess Multimat RH 1500-2A block-making machine including R&W SHV-500 height measuring station - Hess sliding table (finger car) - Rotho – curing chamber - Complete dry cycle with packaging system - 3,00 ...

Four-Way Planer Little Type Powermat 500 Technical data: - Planing width (mm): 230 - Planing height (mm): 140 - Waves: 6 1st Shaft: Down 2nd wave: right 3rd wave: left 4. Shaft: top 5. Shaft: top 6. Shaft: down - Spindle speed (rpm): 8000 - Total connected load (kW): 65 - Rated current (A): 142 - With planer heads Powerlock System - Program memory  - Soundproofing hood  - CE compliant 

Metallic Plane with Micrometers Type: Measuring table / inspection plane Equipment: Metallic plane with micrometers Measurement range: Micrometers with various ranges, typically between 25 mm and 1000 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-52

Planetary agitator Hobart HSM 30 Year of Make: 2007 Protective grille with safety switch Timer 3 speed settings Incl. 30 litre kettle Incl. 2 whisks, flat beaters and kneading spiral

Planetary mixer Rego P 50 Robust and precise planetary, stirring and kneading machine Stepless speed control by lever Height adjustment by hand crank Timer Stainless Steel Protective Grille with Safety Sensor LED Boiler Lighting Incl. 50 litre kettle and mixing whisk

Planetary mixer Tonelli PDC 120 Universal 2000 Year of Make: 1989 Condition: functional Siemens control system Boiler capacity: 120 litres Incl. 2 tank cars Incl. 2 tools Accessories of choice and availability

Planetary mixer Tonelli M 120 Year of Make: 2007 Condition: functional Siemens control system Boiler capacity: 120 litres Incl. 2 tank cars Incl. 2 tools Accessories of choice and availability

Planetary mixer Tonelli M 120 Year of Make: 2003 Condition: functional Siemens control system Boiler capacity: 120 litres Incl. 2 tank cars Incl. 2 tools Accessories of choice and availability

Planetary mixer Rego P 50 Robust and precise planetary, stirring and kneading machine Stepless speed control by lever Height adjustment by hand crank Timer Stainless Steel Protective Grille with Safety Sensor LED Boiler Lighting Incl. 50 litre kettle and dough hook

Terlet Terlotherm T0-4 Scraped Surface Heat Exchangers (SSHE) for inline heating and / or cooling of liquid, viscous and high viscous products with or without whole parts (up to 25 mm), like starch preparations, soups, sauces, dairy products etc. Scrapers can be easily replaced. CIP Cleanable. Inspection without removing seal. Lid can be opened with clamps. Large heating area on limited floor area. Tangetiale inlet. Accelaration and deceleration area. No damage to the product. Maintenance friendly, only one seal and one drive. Product volume: 32 liter. Number of scraper rows: 4. Inner vessel: 0 / 10 Bar - 0 / 150 °C - 32 liter. Jacket #1: -1 / 4 Bar - 0 / 150 °C - 2,6 liter. Jacket #2: -1 / 4 Bar - 0 / 150 °C - 4,6 liter. Motor: 3 kW - n1: 1.456 rpm - i: 43,33 - n2: 34 rpm - 380/400 V - 50 Hz - 6,60 / 3,85 A. Product inlet: 50 mm. Product outlet: 50 mm. Ground clearance: ± 556 mm. Cy ...

Planetary mixer Rego PM 100 EP Boiler size:Â 100 l Storage computer with recipe management Electric speed control Electric boiler height adjustment Digital time and speed display as well as electr. Automatic switch-off Quick tool change system Incl. 2x kettle, 1x whisk, 1x whisk, 1x whisk, 1x flat beater, 1x kneading spiral

Used transfer machine from Baader Linco. The device automatically transfers birds from the slaughter line to the evisceration line. Birds are released from the slaughter line by cutting off their legs with a built-in cutting unit and re-suspended at the ankle joint on the eviscerating line.

Key data: 510 mm, 2500 mm, 4 St.

Martin T51 Surface Planer – Classic from the 60s | 4-Knife Shaft | overhauled at handover For sale is a Martin T51 surface planer, a real German machine classic from the solid cast iron era of the 60s. These machines stand for extremely smooth running, precision and durability – exactly what many modern machines often no longer deliver. ⸻ Technical data & equipment: • Model: Martin T51 • Year of construction: approx. 1960s • 4-knife shaft • Solid cast design • Precise dressing tables with good flatness ⸻ Condition: • Machine has been tested • Technically fully functional • Signs of wear due to age (purely visual) New knives are used at handover → ready for immediate use Approx. 1200 KG - Forklift available for loading.

Thickness planer FELDER D951 year 2014, 7.35 kW, S/N 4300122014

Four-sided planer WEINIG P23 -used-6 spindles reversible knife system, profile device, electric height adjustment, lubricant pump, dust tested---------- Technical data ----------planing width: 230 mm, planing height: 120 mm, number of spindles: 6, motor spindle 1: 5.5 kW, motor spindle 2 + 3: 7.5 kW, motor spindle 4: 7.5 kW, motor spindle 5: 5.5 kW, motor spindle 6: 4 kW, feed speeds: 5-24 m/min., suction nozzle Ã: 6 x 140 mm, dimensions (LxWxH): 4,000 x 1,700 x 1,600 mm, weight: 3,200 kg

Dough Sheet Former Rinc Dough Extruder Three Roller Former - Three rollers of dough sheet former - Manufacturer: beef - Roller Ride 50cm

Excellent condition - Fully operational - Loading / Transport possible! Working width 520 mm Table length 3008 mm Entrance table length 1775 mm Motor 4 KW Speed rotation 5000 rpm Spindle with 4 knives Spindle diameter 120 mm Tilting fence with dimensions 1500 x 175 mm Infeed table with motorized height adjustment, electronic digital readout of cutting thickness

sieve decks 4 to 6 mm; power approx. 80 - 100 tons/hour; equipped with 30 kW fan; working width 1000 mm; incl. (1x) \"INTEGRA\" screening machine; type VSC 120/105x300; working width 1200 mm; equipped with (2x) vibration motors; mounted on metal base; Total dimensions. approx. 4286x2005x4659 mm; (1x) \"INTEGRA\" broadband conveyor; type FBR 160-25-0330; working width 1660 mm; Total dimensions. approx. 4400x2275x910 mm; (1x) \"INTEGRA\" conveyor belt; type FBR 065-32-0260; working width 840 mm; Total dimensions. approx. 2960x1233x760 mm; (1x) \"INTEGRA\" elevator conveyor; type FBR 065-47-0990; working width 840 mm; Total dimensions. approx. 10,400x1120x7992 mm; (1x) \"INTEGRA\" conveyor belt; type FBR 065-40-1280; working width 840 mm; Total dimensions. approx. 13,200x1125x635 mm; (1x) \"INTEGRA\" conveyor belt; type FBR 065-40-0860; working width 840 mm; Total dimensions. approx. 9560x1 ...

Excellent condition - Fully operational - Loading / Transport possible! Working width approx. 500 mm, motor 4 kW, planing table length 1620 mm, total table length 2850 mm, angle fence swivelling, with narrow dividing rail, SUVAMATIC finger guard, planing shaft with 4 Tersa knives, planing table with slotted table lips.

Excellent condition - Fully operational - Loading / Transport possible! Working width 13 to 230 mm Working height 6 to 120 mm Number of spindles 4 Motor power of dressing spindle 4 to 7.5 kW Motor power of vertical spindles 5.5 to 11 kW Motor power of upper spindle 4 to 11 kW Feeder motor power 1.5 kW Diameter of spindles 40 mm Tool flight circles of throat spindles 125 to 200 mm Adjustment range of spindles axial 30 mm Adjustment range of dressing spindle 5 mm Feed rate 8 m per minute Diameter of feed rollers 140 mm Width of feed rollers 2 x 50 mm Width of roller in outfeed table 50 mm Adjustment range for dressing table and ironing ruler 10 mm Height of right stops 60 mm Length of dressing table 2000 mm

Excellent condition - Fully operational - Loading / Transport possible! length of surfacing-table 1,600 mm planing width 500 mm Angle Limit Stop 1100 x 170 mm

Capacity: 230 x 125 mm. Number of axes: 4 Axis diameter 40 mm Bottom 6.3 kW, right/left 7.5 kW, top 7.5 kW Mobile axis for various widths Pneumatic pressers Variable feed speed Motorized height adjustment of the top bar Feed table 2000 mm length Knife heads included

Capacity: 260 x 130 mm. Spindles: 5 Shaft diameter 40 mm Bottom 4 kW, right/left 7,5 kW, top 5,5 kW, bottom 4 kW Cardan shaft drive Pneumatic pressures Feed speed variable, motor 3 kW Motorised height adjustment of top presssure beam Infeed table 2200 mm length tools not included

Capacity: 180 x 100 mm. Spindles: 4 Bottom with referencing 4kW, fence 3kW, near 3kW, top 4kW Motorised thickness adjustment 4 cutterblocks Chaindrive Infeed table 1m70. long

Four-sided planer Working height: 740-750 mm Max working width: 305 mm Min working width: 50 mm Max workpiece height on 2 sides: 310 mm Max workpiece height on 4 sides: 160 mm Min workpiece height: 17 mm Feed speed steplessly adjustable: 10-60 m/min motors: bottom 11 kW, top 11 kW, right 7.5 kW, left 11 kW feed motor: 7.5 kW motor height adjustment: 1.5 kW speed 5,500 rpm driven top and bottom feed rollers

Motor: 5.5 kW Speed: 2980 rpm Input diameter: 25 cm Output dimensions: 30 x 20 cm With mounting bracket With control box

Hard rock measuring table GARANT with measuring plate PLANOLITH approx. 600x600 mm, tested in 1996, weight approx. 354 kg, DIN 876

In stock on pallet, total dimensions approx. 1200x800x1400 mm Auction-ID: A1-45790-549

CONTROLS   CNC controls SIEMENS 840 D SL CHARACTERISTICS HEAT TREATMENT EQUIPMENT   heating method: induction DIMENSIONS / WEIGHTS   space requirements -left/right-: 8044 mm   space requirements -front/back-: 8046 mm   total height: 4000 mm ELECTRICAL SPECIFICATIONS   mains power supply: 624 kVA Power Data:Mains connection power: 624 kVAMains voltage: 400 VRated current: 900 AMains frequency: 50 HzTransformer:Power: 560 kVAVoltage: 400 / 580 VCurrent: 809 / 558 AFrequency: 50 HzConverter:Power: 552 kVA / 450 kWVoltage: 750 VCurrent: 667 AFrequency: 6 – 10 kHzStarting:Power: 50 kWVoltage: 400 VCurrent: 90 AFrequency: 50 HzAuxiliary Equipment:Voltage: 400 VCurrent: 25 AFrequency: 50 HzControl Voltage:Voltage: 230 / 24 VCurrent: 5 / 40 AFrequency: 50 Hz / DC Automation KUKA Roboter

The used palletizer from KHS INNOPAL Lord 1BUN1 is a specialized palletizer – a renowned manufacturer of machines for the beverage, food and packaging industry from KHS. The INNOPAL Lord 1BUN1 series model is known for its high efficiency (up to 420 layers/hour), which gives 75 thousand bottles per hour of nominal capacity, in the offered unit the capacity was set at the level of 45-50 thousand / hour. Due to the configuration of other elements of the line, the said unit is characterized by high flexibility and modular design, as it has an additional automatic head for palletizing crates and cartons, so it is ideal for palletizing crates, cartons, trays, returnable packaging or bottles. The year of production of the polarizer is 1999, installed in 2000, the polarizer in 2016 underwent modernization (replacement of guides with new ones), under the supervision of KHS service. In additio ...

The ITT Jabsco Pureflo Lobe 24250-4310 is a positive displacement rotary lobe pump with sanitary design which can handle dairy products (e.g., yoghurt, quark, curd and butter), foodprocessing, beverage, cosmetics, pharmaceutical and fine chemicals industries. This pump is perfect for managing all kinds of fluid, of either low or high viscosity, as well as for filtering and bottling applications. Products containing fragile solids such as curd can be pumped without damage thanks to the specially designed lobes. Tri-lobe stainless steel lobes / rotors. Nominal displacement: 0,936 liter per revolution. Maximum nominal capacity: 39,9 m3/h. Inlet connection: 3 RJT. Outlet connection: 3 RJT. Maximum product pressure: 6 bar Maximum pump speed: 700 rpm. Maximum temperature: 110 °C. Previous used in a Casein plant. The current motor with this pump is 7,5 kW - 1.450 rpm - 400 V - 50 Hz - 14,3 A.  ...

Light material separator Remav LA 1400

A low-voltage reactive power compensation system Bausatz for improving the power factor is available. Controller: BLR-CB, total reactive power: 300kVar, number of stages: 6, stage rating: 50kVar, rated current: 433A, degree of protection: IP20. In 2007, 16 power capacitors were replaced in the system. Documentation available. An on-site inspection is possible.