lam plan used for sale

Key data: 410 mm, 240 mm, 4 kW

SCM 2041 FS Planer and Thicknesser Manufacturer SCM Italy AB 66989 Ref 110830 Year of manufacture approx. 1994, from school use in good condition 3 cutterblock Planing shaft speed 5000 rpm Planing: Table length 2000 mm Planing width 410 mm Support table length 1040 mm Support table length 910 mm Max. Chip thickness: 10 mm Jointing fence swivelling 0 - 45° Table adjustment for planer with rotary lever Pressure link vibration guard Thickness planing: Planing width 410 mm Max. chip thickness: 7.5 mm Chip thickness: 7.5 mm Min. planer thickness: 3 mm Max. planer thickness: 240 mm Planing thickness: 240 mm Thicknessing table length: 730 mm Sliding table roller Planing shaft speed 5000 rpm Feed speeds 6 and 10 m/min Height adjustment of thicknessing table with handwheel Infeed roller steel Exit roller steel Connections: Motor power: 4 kW with motor brake  ...

Shrink bags are mainly used in the food industry. Food packaged in a shrink bag is placed in a container filled with hot water for a few seconds; during the immersion process, the bag shrinks around the product, keeping it fresh for longer and affecting its appearance. The immersion tank can be operated manually or automatically. On the Inauen VC999 Tank 6241 Shrink Tank, programs can be easily set via a touch screen. The machine is made entirely of stainless steel. Capacity: 12 cycles/min. Programmable cycle time: 5-99 s.

A wire drawing plant is available. 1) Wire rod pay-off, version: 2-fold. 2) Combination unit GSG 840, wire diameter min./max.: 5.5mm/16mm, wire type: wire rod, wire strength: 40-60daN/mm², crushing and bending rolls: Carbide inserts. 3) Dry coating unit BSG/T, filling: calcium stearate, consumption: approx. 350g/wire ton, drawing speed: 15m/s. 4) Cassette with 2 places (1x roll stand, 1x cassette) PKG/T (TS), wire strength: 40-60daN/mm², wire thickness inlet/outlet: 9.5mm/3.5mm-8.5mm, roll diameter min./max.: 115mm/125mm, bore diameter/width: 82mm/15mm-25mm, cooling bolt diameter: 25mm, cooling water consumption: approx. 600l/h. 5) Drawing machine Koch KHZ 6300, year of manufacture: 1992, number of pulls per block: 1, drawing drum diameter: 700mm, pulling force: 5000N, wire material: mild steel, running-in strength: 40-45daN/mm², max. drawing range: 5-8.5mm, drawing speed: 7m/s. 6) Sp ...

Rego PM20 Planetary Mixer 20 liter Bakery Confectionery - Stepless electronic speed control / speed control - Electric boiler height adjustment - With automatic switch-off / timer - Light for illuminating the boiler Accessories: - 1 kettle (20 liters) - 1 kneading arms - 1 flat beater - 1 whisk - All tools made of stainless steel

1 aseptic filling Krones PET bottle filling line for bottles with a capacity of 1,500 ml, capacity 20,000 pieces/hour Year of construction 2005, No. 564-045 With sterile tank, capacity 7,500 l with sleever machine on the 1st floor above with Krones bottle cap conveyor. with Krones labeller, built in 2005 with various spare parts, but without PET blow bottles technology and without PTT bottles carton packing machine

KHS can filler, Innofill, 50 filling valves, standard can 500 ml, Sleek can 330 ml, can lid 202, with Ferrum seamer F8, year of manufacture: 2008, with can lid magazine KHS Can Filler Filling Canning, Innofill, 50 Filling valves, Standard Can 500ml / 0.5liter, 50cl, Sleek Can 330ml / 0.33l, 33cl, Can end lid 202, with Ferrum can seamer F8, year: 2008, with can end lid magazine

An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available.

Four-sided planer Weinig with glazing bead saw Type: P 23 Year of Make: 1995 Planing width 230 mm Planing height 130 mm 6 planing shafts + glazing bead saw Shaft arrangement 1 Bottom 4 kW 2 right-hand lifting spindle clocked with 3 Left 7.5 kW 4 Top-clocked shaft 5.5 kW 5 Bottom 5.5 kW Glass bead saw Spindle diameter 40 mm Right and left shafts are driven by 1 motor with manual Waxilit pump with distributor for extraction pipes fully equipped with planer heads as well as 4 additional milling heads good, ready-to-use condition

A Weinig four-sided planer including automation, double cross-cut saw, infeed and extraction system is available. 1) Four-sided planer Weinig Hydromat 22 BL with automatic lubrication, year of manufacture: 1987, working width: 220mm, working height: 140mm, number of heads: 7, head arrangement: bottom/right/left/right/top/bottom/bottom, spindle diameter: 50mm. 2) Kellfass automation unit consisting of double cross-cut saw, length: 5000mm, buffer cross conveyor and pneumatic roller infeed. On-site inspection is possible.

Working width: 230mm, working height: 160mm, number of spindles: 6, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400m³-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible.

A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 125mm, L/D ratio: 42, extrusion capacity: 650kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/512kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible. The system has extensively documented defects.

A planetary saw (inline pipe saw) IPM is available. Max. pipe diameter: 400mm, power: 7kW, machine dimensions X/Y/Z: approx. 4500mm/2000mm/2300mm, weight: approx. 7000kg. Documentation available. On-site inspection is possible.

A Graewe planetary saw (inline pipe saw) is available. Max. pipe diameter: 500mm, power: 7.5kW, machine dimensions X/Y/Z: approx. 3500mm/1800mm/2000mm, weight: approx. 3200kg. Documentation available. On-site inspection is possible.

A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 145mm, L/D ratio: 42, extrusion capacity: 700kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/609kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible.

The Macchi 3 layer Film Blowing Machine PLASTEX model is a compact line for a top quality film production with a range up to 350 kg/h and a film width of 1.650 mm. This production line of 3 layer co-extrusion blown film extruder produced by MACCHI can be used for the production of a wide range of general packaging films as it allows to achieve a high output and a significant level of productivity and flexibility.

Working width: 630 mm Dimensions (L/W/H): 115x110x120 mm turning speeds: 5000 U/min connected load frequency: 380 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two rolling mills for thermosetting plastics are available. 1) 2x identical rolling mills Berstorff (Krauss Maffei), year of construction: 1959, drive wheel renewal: 2000, working width: 1200mm, roll diameter: 400mm. 2) Big bag frame with electric chain hoist. 3) Suction blower. 4) Engelsmann screening plant. 5) Glass fiber dosing devices. 6) Conveying units, control system and screws. 7) Krauss Maffei test laboratory roller for color determination. Without shredding units. Documentation available. On-site inspection is possible.

x-travel: NA mm y-travel: NA mm workpiece height: mm stroke length max.: 450 mm table length: 450 mm table width: 350 mm total power requirement: 1,7 kW weight of the machine ca.: t dimensions of the machine ca.: m Shaper, horizontal,mechanic,vice hydraulic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conical rounders WP Kemper Output max. 4800 pieces/hour depending on weight Stainless steel version with lubrication & blower Cones and troughs with Teflon coating new approx. 5m effective path for dough weight of approx. 100 to 700 g per na TA (KM channels) Machine mobile Connection 400V, 4 kW, 16A-CEE plug Dimensions: 1500 x 1330 x 1600 mm, WxDxH Used machine overhauled 6 months warranty + spare parts service Option: Maintenance contract Service Package Instruction & Commissioning Visit our large bakery machine exhibition!

A TBS Pack film shrinking machine is available. 1) TBS Pack semi-automatic angle welding machine, year of manufacture: 2016, film type: POF/PP/PE/PVC, max. film thickness: 50my, max. workpiece dimensions X/Y/Z: 480mm/680mm/200mm, max. roll length/diameter: 600mm/250mm, max. connected load: 1.8kW, welding capacity: 15/min, welding frame dimensions X/Y: 500mm/700mm, weight: approx. 230kg. Documentation available. 2) TBS Pack shrink tunnel ST-5530, year of construction: 2016, tunnel dimensions X/Y/Z: 550mm/1200mm/300mm, max. conveying speed: 30m/min, max. connected load: 9.5kW, weight: approx. 440kg. Documentation available.

A film shrinking system consisting of 5 components is available. 1) 2-part roller conveyor, dimensions X/Y: approx. 4200mm/550mm. 2) Film loading device with cantilever arm for film change, dimensions X/Y: approx. 3600mm/2400mm. 3) Sealing tunnel, dimensions X/Y: approx. 5600mm/1650mm. 4) Packaging turning station, dimensions X/Y: approx. 5450mm/3100mm. 5) Carton stacking machine, dimensions X/Y: approx. 3400mm/3900mm. Total system dimensions X/Y/Z: approx. 22250mm/3900mm/2950mm, packaging capacity: approx. 600-1000/8 hours. Including 47x films, film width: 600mm, film thickness: 55my. On-site inspection is possible.

A Stummer bale opener is available for opening compressed fiber bales for subsequent feeding. Output basic PES: approx. 1100kg/h, feed conveyor belt length: 5000mm, machine dimensions X/Y/Z: approx. 3550mm/2400mm/3000mm, weight: approx. 5000kg, operating hours: approx. 10200h. On-site inspection is possible.

A complete bottle filling, sterilizing, capping, labelling, cartoning and palletizing line for the wine industry is available. Bottle filling capacity: 4000 bottles/h, bottle format sets: 1l and 0.75l Schlegel/Bordeaux/Bugunder/0.5l/0.25l, sterilizer capacity: 4000 bottles/h, capper capacity: 8000 bottles/h, labelling capacity: 10000 bottles/h, capping capacity: 10000 bottles/h, carton formats: 12 and 6-bottle crates/12 and 6-bottle cartons, palletizing capacity: 1000 cartons/h. Line components: 1) Normpack Compact Form CF 670/980 carton folding machine, year of manufacture: 2000, output: approx. 650 cartons/h, 2) Stork VV-24 L.W. bottle filling machine, Year of manufacture: 1977, 3) Silmo ST XII/110 v ozone immersion bath sterilizer, year of manufacture: 1983, bottle formats: all standard wine bottles, 4) Miho LC 2000 caustic tester, year of manufacture: 2003, 5) Kapsler Robino & Galand ...

A concentrate system for thickening and concentrating liquids, typically in the production of juices, concentrates or other liquids in the food industry, is available. Evaporator: horizontal, evaporator stages: 4, operating mode: live steam, heat exchange: preheating/recovery/cooling, condensation: semi-barometric milk condensation, flavor extraction: rectification/floor column. Water evaporation: 4840kg/h, inlet quantity: 6600kg/h, inlet dry matter: 12%, outlet quantity: 1760kg/h, final dry matter: 45%, aroma recovery at 150-fold concentration: 42l/h, steam consumption: 1685kg/h, specific steam consumption: 348g/kg, fresh water consumption: approx. 12700l/h. Documentation available. On-site inspection is possible.

Motor power: 0.48 kW/1.9 kW, motor speed: 750 rpm/1500 rpm.

A refrigeration system including free cooler, drip tray with substructure, piping, connection lines and control system is available. 1) Eurocooler refrigeration system: Refrigerant: R407C, cooling capacity: 235kW, water circulation rate: 38m³/h, glycol content: 35%, compressor capacity: 80kW, fan capacity: 33280m³/h, condenser surface area: 10.89m². Machine dimensions X/Y/Z: approx. 2200mm/4600mm/2100mm, empty weight: approx. 3150kg. 2) Dry cooler (free cooler) GQ2590.BX, recooling capacity: 233kW, volume flow: 34.9m³/h, air volume: 129000m³/h, surface area: 1844m². Machine dimensions X/Y/Z: approx. 9300mm/2400mm/1600mm, empty weight: approx. 1750kg, working hours: over 70000h. The changeover valve of the compressor of the free cooler is defective. Documentation available. On-site inspection is possible.

A complete LTG Mailänder (now Koenig & Bauer) thermal exhaust air incineration plant is available. Exhaust air volume: 20000Nm³/h, max. solvent volume: 1.5g/m³, max. combustion chamber temperature: 850°C, fuel: natural gas, calorific value: 10kWh/m³, connected load: 45kW, solvent filter capacity: 30kg/h. Documentation available. On-site inspection is possible.

A dust extraction system is available. 1) Filter unit FAV FSR219/200-FDK, year of construction: 2019. 2) Fan intensive filter RM 50-N-60, air volume flow: 20000m³/h. 3) Intensive filter fan RM 28-N-45, air flow rate: 6900m³/h. 4) Fan intensive filter RM 50-N-60, air flow rate: 20000m³/h. Documentation available. On-site inspection is possible.

A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On ...

Hammer mill / vibratory press for the production of concrete slabs Manufacturer: Plakoma Complete system Vibro press for the production of concrete slabs Manufacturer: Plakoma Complete system

Key data: 5 , 120 mm, 230 mm

Planing and moulding machine Profimat 23 E Working width: 230 mm Working height: 120 mm Dressing table length: 2000 mm Spindle arrangement 1: Dressing 5.5 kW, 6000 rpm, 40 mm diameter 2+3 Left+ Right 7.5 kW, 6000 rpm, 40 mm diameter 4: Thickness 5.5kW, 6000rpm, 40mm diameter 5: Bottom 4kW, 6000rpm, 40mm diameter Feed motor: 2.2 kW Feed speed infinitely variable 0-24 m/min Milling heads with adjustment gauge Total power requirement: 27 kW Dimensions set-up: 3400 x 1650 x 1970 mm Machine weight, approx.: 3500 kg

Key data: 410 mm, 220 mm

Dressing and thickness planing machine TOP Master FS 410 Function tested Working width: 410 mm Max. planing thickness: 220 mm 4-knife shaft Dressing table length: 2000 mm 2 feed speeds Feed and Pull Roller: Steel Table rollers Tiltable stop Very good condition Weight approx. 900 kg

SCM surface planer mod. Used F410 useful working width mm. 410 total length of the tops mm. 2610 Nr. 4 knives Year of manufacture 2000 EC

Production lines: 1. Polyester fiber production line (Chinese brand) Polyester fiber production line, manufactured in 2008, put into operation in 2010. From the end of 2012 until the second half of 2019, fiber production was suspended. The productivity of the line is 10,000 tons of fiber per year. The possibility of producing fiber from primary raw materials - PET granules and from secondary raw materials - PET flakes (recycled PET bottles). The main default raw material (as cheaper) is PET flakes. The available spinneret can be used to produce solid fiber 3, 7 and 15 denier, and hollow fiber, 7 and 15 denier. Hollow fiber can be produced in the "conjugated" type. Can buy and use other denier spinnerete according needs. The main components of the line: Fiber extrusion line • Vacuum dryers, volume 8m3, heated with thermal oil, year of manufacture 2011 – 4 units. ...

Key data: 4 , 230 mm, 140 mm

For sale is a robust four-sided planer from the manufacturer GUBISCH, type B230, built in 1986. The machine runs perfectly and is technically in very good condition. Specifications: • 4 spindles with 7.5 kW motor power each and motor brake • Spindle diameter: 40 mm • Speed: 6,000 rpm • Tool diameter: 125 mm • Spindle shaft drive • Planing width: up to 230 mm • Planing height: up to 140 mm • Feed motor: 1.5 kW, infinitely variable from 3.5–19 m/min. • Diameter feed rollers: 140 mm • Dressing table length: 2,000 mm • Machine dimensions: 3,800 x 1,400 x 2,000 mm (LxWxH) • Weight: approx. 2,900 kg Tested, technically flawless Price net plus VAT. VAT. Delivery by freight forwarder can be organized on request. If you have any questions or would like to receive an individual offer, please do not hesitate to contact us. TEL. 016096679844 M ...

Tabletop fat baking appliance HFD for fatty pastries e.g. doughnuts, doughnuts, quark balls Stainless steel version, with moving table Fat baking machine with 2 dipping grids, Drip tray and steam lid Fat quantity approx. 17 kg only DGUV V3 tested by us Connection 400V, 5 kW, 16A- CEE plug Approx. dimensions: 1250 x 750 x 250 mm, WxDxH Used device cleaned and tested 3 Months Warranty + Spare Parts Service Option: Maintenance contract Service Package Instruction & Commissioning Come to our large exhibition!

Schmalz Vacumaster Swivel Vacuum Lifter Indoor Crane Assembly Brand: Lard Type: Vacumaster Year of Make: 2008 Lifting capacity: 250 KG horizontal 200 KG vertical Operation: Electro-pneumatic fixation Swivel: pneumatic Teat: 63 cm

Key data: 400 mm, 2100 mm, 3 St.

SPECIFICATIONS: Table dimensions: 2100 x 400 Roller with 3 knives EQUIPMENT: 01 Knife adjustment device 03 Spare blades

Planer and moulder with grinding unit Position 1. Abricht Spindel Position 2. Right Vertical Spindle Spindle Position 3. Left Vertical Spindle Position 4. 2. Right Vertical Spindle Position 5. 2. Left vertical spindle Position 6. Upper Horizontal Spindle Position 7. Bottom Horizontal Spindle Position 8. Grinding unit at the top Position 9 Grinding Unit Bottom Position 10 Universal Spindle

Key data: 6 , 190 mm, 120 mm

SPECIFICATIONS: Feed length: 1900 mm Machinable width: 190 mm Machinable height: 120 mm Spindle Ø 35 mm Number of Spindles: 6 Chain drive SPINDLE CONFIGURATION: Bottom (3 kW) Right (2.2 kW) Top (4 kW) Bottom (4 kW) Right (4 kW) Left (4 kW)

A complete bulk powder coating system MEEH powder coating and dust filter system is available. Product dimensions X/Y/Z: 8000mm/800mm/3000mm, max. product weight: 1000kg, total surface area of all openings: 12.9m², max. permissible powder injection quantity: 90kg/h, extraction capacity: 18000m³/h, total system dimensions X/Y/Z: approx. 28m/13m/6m, compressed air requirement: approx. 38nm³/h, compressed air: 8bar, connected load: approx. 30kW. 1) Manual powder stand with suction, internal dimensions X/Y/Z: 10m/3m/4m, external dimensions X/Y/Z: 10040mm/3370mm/4600mm. 2) Chamber dryer MEEH KTÖ240, year of construction: 2008, air capacity: 30000m³/h, heat output: 240kW, burner: Weishaupt, burner year of construction: 2019, fuel: heating oil, internal furnace dimensions X/Y/Z: approx. 8530mm/4610mm/5840mm, external furnace dimensions X/Y/Z: approx. 8200mm/3500mm/4000mm. 3) Lifting and lo ...

Weinig Unimat 17 four-sided planer Working width 170mm Working height 140mm Number of spindles 6 Spindle arrangement Bottom 5.5kw Right 5.5kw Left 5.5kw Top 7.5kw Bottom 5.5kw Universal 5.5kw Adjustable heads Feed speed adjustable via variator 6-36m/min Drive on cardan shafts Feed motor 5.5kw Pneumatic material clamps Total power 41kw

SCM FS410 NOVA planer Working width 410mm Working height of the thicknesser 220mm Thicknessing table mounted on 4 supports Two planing speeds with a thicknesser of 6-12m/min 4-knife shaft Shaft with tersa knives Planing shaft diameter 95mm Shaft speed 5000r.p.m Additional fence for planing low workpieces with a planer Motor power 4kw Planer tops length 2200mm Slotting and drilling unit CE Certified Technical documentation

Key data: 4 , 180 mm, 105 mm

Profiset 40 EP with 2 axis control and 99 programs Finished size maxi. 180.mm / mini. 25.mm Engines. 2 x 7.5 KW 380 V. 50 H. Dressing table 2300 mm Feed roller in front of the dressing room 4 x planer heads TERSA Suisse 1st year warranty after delivery and commissioning

Key data: 250 mm, 750 mm, 2 St.

ABH (Beuving) Chico Vlakbank Merk: ABH Type: Chico A3 Schaafbreedte 250 mm Spaanafname Max. 8 mm Aanvoertafel 750 mm Afvoertafel 750 mm Total panel length 1,500 mm Chisel-as Z-2 ø90 mm

Key data: 170000 KW

Fully Equipped Diesel Power Plant – Over 170 MW Capacity This opportunity is not yet on the market — and won’t be found anywhere else. Contact us now to receive exclusive details and position yourself ahead of the market before the sale is public. END USERS ONLY

1,216 liter turbo stirrer for spray cream 2 pieces with mixing table Characteristics: Volume container 1 1216 liters Volume container 2 1216 liters material V2A (AISI 304) 1.4301 Outside surface 2B=IIIC ground Surface inside 2B=IIIC ground Total height 2700 mm Width 2000 mm length 6000 mm Number of feet 4 Description MJ UNI-HIGH Consists of 3 parts with pedestal Part 1/3 Mixing table Dimension: Length: 1,750 mm Width: 800 mm Height: 1,300 mm Part 2/3, 3/3 per container with a capacity of 1,216 liters Dimension: Total height: 2,700 mm Cylinder height: 1,250 mm Inner diameter: 1,150 mm Container description: Topsoil: Lid with 1/3 flap at the front and back with grid Propeller agitator Underbody: Residual drain pipe connected to line 4 fixed feet on each frame

Key data: 500 mm, 8 mm, 6 kW

Martin T54 Surface Planer, with Tersa Z-4 and Hydraulic Table Lift Brand: Martin Type: T54 Year of Make: 1997 M. No.: V240171 Motor power: 5.5 kW Knife shaft: 5,000 tpm Z-4 Tersa Solid Steel Shaft ø125 mm Planing width: 5 Spahn removal: 8 mm Table length: 2,850 mm Task - table length: 1,640 mm Acceptance - table length: 1,200 mm Table height: 855 mm Dressing fence: 45° tiltable with Dun planing bar and width adjustment on lineair guides Weight: 1,200 KG Option: SuvaMatic protection device Condition: Full-function tested

Key data: 500 mm, 1640 mm, 4 St.

Martin T52 Surface Planer Brand Martin Type T52 Year of manufacture 1987 M. Nr V 151674 Motor power 5.5 kW (7.5 hp) Knife shaft speed 5000 rpm Knife shaft Z-4 Circle ø125 mm Planing width 500 mm Blade length 510 mm Spahn removal 8 mm foot pedal adjustment with display at table level Table length 2840 mm Task - Table length 1640 mm Acceptance - table length 1200 mm Table height 800 mm Dressing tank 1,100165mm Tilt 45° Weight approx. 950 KG Condition: Function tested

Key data: 500 mm, 1640 mm, 4 St.

Martin T52 Surface Planer Brand Martin Type T52 Year of manufacture: 1986 M. No V144098 Motor power 5.5 kW (7.5 hp) Knife shaft speed 5000 rpm Knife shaft Z-4 Tersa Circle ø125 mm Planing width 500 mm Blade length 510 mm Spahnabnahme Praxis 16 mm foot pedal adjustment with display at table level, limited to 8 mm for safety. Table length 2840 mm Task - Table length 1640 mm Acceptance - table length 1200 mm Table height 800 mm Dressing tank 1,100165mm Stop tilt 45° Weight approx. 950 KG Condition: Function tested