lam plan used for sale

Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head -Recording: SK50 Minimum bore diameter: 95 mm -Max. bore diameter: 115 mm -Suitcase -Dimensions: 400/170/H140 mm -Weight: 12 kg

TECHNICAL DATA: Autoclave dimensions mm: 350 x 2000 Autoclave volume lt: 175 Installed electrical power KW: 55

Double pipe heat exchanger pipe heat transfer for biogas plant, sewage treatment plant sludge hygienization - used - Manufacturer AEL GmbH Leisnig Type Double pipe heat transfer W202 Fabr. No. 7.0637.940/29-56 Built in 1997 Permissible betieb pressure 6 bar Permissible operating temperature 90°C Content 1090 l Kerb weight 6510 kg Length approx. 11 m Width approx. 3 m Depth approx. 1.5 m

Big Bag filling station, filling and weighing system used The system consists of the following components: 1 filling hopper approx. 2300 height 2500 mm 2 stainless steel trough screws 1 tumbling/shaking sieve approx. 1200 height 1900 mm 1 BigBag filling station approx. 1950 x 2400 x 3700 mm 1 control cabinet The Big Pack filling is filled by wheel loader or forklift via a pouring funnel. The filling material is transported via a conveyor screw to a tumbling sieve. From there, transported with another screw to the actual weighing and filling station. The big bags lie on a vibrating floor when filling and are thus compacted.

Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head -Recording: SK50 Minimum bore diameter: 100 mm -Max. bore diameter: 120 mm -Suitcase -Dimensions: 350/170/H135 mm -Weight: 12 kg

New machine Stainless steel model 24-month warranty Properties: + TOP value for money + Solid cone round wire in stainless steel version + with control panel and automatic flour spreader + Model "S", suitable for small dough pieces (approx. 100 - 350 gr) + optimally suited for wheat dough up to a TA of approx. 170 (depending on the dough) + extra long rounding/running distance of 6 meters for best round ingestion properties + gutters and cones are teflon-coated + Base is mobile and also available in stainless steel + mounted on robust rollers with fixed SPECIAL equipment (not retrofittable!): - Blower / ventilation of the gutters and cone (recommended for dough with TA > 155): + EUR 1,745,-- Technical data: Weight range: 100 - 350 grams (dough/product dependent) Hourly output: approx. 1,800 pieces (dough/product dependent) Orbit: 6 meters Dimensions: 105 x 105  ...

New machine Stainless steel model 24-month warranty Properties: + TOP value for money + Solid cone round wire in stainless steel version + with control panel and automatic flour spreader + suitable for medium-sized dough pieces (approx. 300 - 1,100 gr) + optimally suited for wheat dough up to a TA of approx. 170 (depending on the dough) + extra long rounding/running distance of 6 meters for best round ingestion properties + gutters and cones are teflon-coated + Base is mobile and also available in stainless steel + mounted on robust rollers with fixed SPECIAL equipment (not retrofittable!): - Blower / ventilation of the gutters and cone (recommended for dough with TA > 155): + EUR 1,745,-- Technical data: Weight range: 300 - 1100 grams (dough/product dependent) Hourly output: approx. 1,800 pieces (dough/product dependent) Orbit: 6 meters Dimensions: 105 x 105 x ...

Fat baking device Esback Köhler 661 101 -Fat baking device with fermentation cabinet -with 1 tipping plank trolley and 10 tipping boards -optional with 2 tipping plank trolleys and 20 tipping boards -380 Volt 50Hz -Fat tubs inner mass: 72x63cm

- brand new - 20,000 litres steel tank - storage tank - diesel tank according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 6.90 m - D = 2.00 m - weight approx. 4.2 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey / RAL hue. (On request, other RAL col ...

Manufacturer: NERAK Type: WB 370 Built in 2003 CC-foot 2160 mm CC-Vertical 9600 mm CC head 3110 mm Plastic cup approx. 36 cm wide 20 cm deep approx. 10 cups per m Rubber block chain Speed: 0.3 m/s Power 5-10 m3/h (bulk density 0.5-1.0 t/m3) User manual and technical drawings available

Hull engine in replacement Scania DC13-071A without turbo,EGR cooler+hoses,PDE's,controlr installed in Kleemann crushing plants. Price only on request

Faceplate, faceplate chuck, four-jaw chuck -Feed size: Ø 450 mm -4: Jaw chuck -Receptacle: Thread -Internal thread: Ø 69 mm -Weight: 40 kg

Compounder with segmented screw elements, cylinder with a degassing opening with hot tee, stainless steel housing, swivel

According to description pdf attached complete line for profiles + WPC profiles

Wastewater treatment plant, drilling water purification, chip separator, paper filter, paper belt filter -Tank dimensions: 1000/700/H800 mm -Agitator: 0.75 kW -Speed: 1500 rpm -Equipment: as shown in pictures, conveyor belt filter/agitator -Dimensions: 1100/710/H1650 mm -Weight: 130 kg

Extruding system with cross-spray head for sheathing of small profiles/filaments consisting of: 30 mm extruder with tool, water bath, extractor and winder Optional with memory for role change

-Fat baking device from Esback -with fermentation cabinet -with tipping plank trolley incl. 10 tipping boards -with 2 screen carriers incl. manual turn -380 volts

Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 500 mm -without: Baking -Camlock mount: Ø 196 mm short taper 11 -Bolt circle: Ø 204 mm -Weight: 80 kg

Planing machine Weinig hydromat H30 W baujar 1990 36m/min Working width 300mm working-high 200mm memeeser of the fresspindel 50mm with suction

Used filling line for glass bottles, capacity 0.33 - 1 l. Line description: - 4XP25 packing machine with the following parameters: - stepless adjustment range - 3500- 8200 b / h, and 5300-12300 b / h - maximum capacity for sparkling water with 6g / l CO2 and temperature 235oK / 11500 g / h for bottles. 0.33l; 5000 g / h for the cylinder 1.0l / - installed power - 2.2 kW 380 V - CO2 consumption - 40 kg / h - pressure of CO2 or sterile air in the tank higher than the fluid pressure by 0.150 MPa - air consumption - approx. 13 m2 / h - air pressure - 0.5 MPa - number of nozzles - 36 pcs. - number of closing heads - 8 pcs. - noize - 90 dB / A - overall dimensions: width - 2895 mm; length - 2125 mm; max height - 2530 mm; curb weight - 5100 kg - service - 1 person

On offer is a water treatment plant from WABS GmbH from 2021, used in very good condition. Technical data: Manufacturer: WABS GmbH Description: Water treatment plant Model No.: UO-D 1200 Year of Make: 2021 Volts: 400 Frequency: 50 KW: 2.2 The device is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take back. The offers are subject to change, subject to errors and subject to any prior sale. Our terms and conditions also apply to every sale, to which we expressly refer

Planetary stirrer Varimixer Bear R-N 30 Used Varimixer Bear Planetary Stirrer Model N-N 30. It is functional and ready for immediate use. The accessories are included. - 30 litres boiler - incl. whisk, flat stirrer and kneading hook - Protective grille - with a boiler - analog control -Woschow & Co Denmark -Bearmixer

1 piece of factory-new mobile residual concrete recycling plant RECYCLING PLANT for processing fresh concrete surpluses MREC 15 - MOBILE VERSION Manufacturer: RSM Type: MREC 15 Year of construction: factory new Washout capacity approx. 15 m³/h WAM washout screw Separation cut 0.3 mm - 1.00 pieces filling funnel - 1,00 pieces high basin (25m³) - 1,00 pieces intermediate pool (2m³) - 1.00 pieces of waste water mixer with console - 2.00 pieces of submersible sludge pumps - 1.00 pieces submersible pump - 1.00 pieces of control for residual concrete recycling plant - 1.00 pieces of flushing gallows - etc. The final painting is carried out according to customer requirements. Price on request Delivery time: immediately available Offer and prices are purely net from location Intermediate sale reserved, errors and/or misrepresentation reserved,

Complete PET Soft Drinks Filling Line for sale by Indassol 1.5 Litre & 2 Litre Concentrated Soft Drinks (non-carbonated) 16,000 - 18,000 bph, Blowing - Filling - Packaging Krones, Krupp, Procomac, Zalkin, Alfa Rollquatro, Hueft, Kisters, Newtec Palletiser (1 Litre Filling Line also available) PLEASE NOTE Both Lines were used by Princes Soft Drinks for the production of Non-carbonated Concentrated Soft Drinks. The Krones Fillers on both Lines are Counter Pressure Fillers and the Lines could be adapted to produce Carbonated Soft Drinks by the addition of a Carbonation Unit to the process plant. ADDITIONAL ITEMS AVAILABLE 2 off Bellis & Morcom High Pressure 40 Bar Compressors. Machines are from 1987 but have been subject to a full Service Agreement with Gardner Denver. Lachenmeier H-Multi Flex Pallet Wrapper/Hooder (shared with Line D6) Serial No. 39031 (2 ...

Complete powerful planing mill with WACO 6 shaft planing machine, double cut-off band saw Möhringer, complete mechanization, moisture measurement, control, etc. etc. Output approx. 2,500 m3/month and shift. Depending on the dimension Facility consists of: Tilt destacking, single piece allocation, Brookhuis moisture measurement, Braun Canali double band saw, small coil bundling with Böhl small coil formation and feeding to stacking machine, 2 x stacking machines with battening, complete packaging line with film dispenser, package press with lower squared timber insertion. The complete Siemens control system, the entire steel substructure, all cabling, pipes, etc. Very well maintained plant for the production of slats, spring groove, 2 by dimension lumber etc.

SCM fs41 elite Dressing thickness planer Planing width 410mm with 4 TERSA planer knives Two feed speeds 6 and 12m/1 400 V 3KW (4 hp ) S1 100% Dressing table length 2000mm Max chip removal of 5mm Planing shaft D=90mm Work tables made of grey cast iron Table adjustment with numerical display Pass-through height 3-230mm Slanted geared steel feed roller Breaking stop with precise round rod guide 90-45° Suction nozzle 120mm

Very well preserved, almost new KÄLIN grinding/planing machine. Year of manufacture 2009/2010 Type Caster IPC 6.000. Only in use for a very short time. Very well preserved, almost new machine with all engines and accessories for the production of up to max. 6 to/h of sanding wood. System complete with Siemens S 7 control, grinding equipment and grinder type Grinder SL 800 and all planer heads, along with a set of spare cutter heads. Extraction system and complete conveyor technology for chip transport. Machine professionally dismantled, ready for takeover immediately. Warehouse location in southern Germany. Viewing is possible at any time. /

- Planetary stirrer with heating - 2 x boiler (approx. 50 ltr.) - 2 x whip - from location warehouse

Quality Used Power Plant with two (2) Solar Centaur 40, 3.0 MW, (Each), 13,800v 60 Hz. Enclosed. Equipment Description Complete power plant with 2 turbine generator systems. Everything included The equipment has very little hours since installation. They will need to be moved off the site. They are located in The USA. They were overhauled in 2020 installed and never used. The following is included: Control Panels, New Square D Switchgear, 15kv, 1200 amp. for synchronizing the generators to each other and the grid. Grid protection hardware and software. Inlet system with filter cleaning system New control system Exhaust system complete New Oil coolers Gearboxes have been overhauled Generator ends have less than 800 hours on them, one is new 0.0 hours A control room enclosure complete with all control switches New battery chargers Ready to be dismantled

Screws: 2x x 58 mm / 26D Engine: 250 kW DC Capacity: approx. 800 - 1000 KG Material: PE, PP, PS, ABS // Details: DC motor, concurrent, segmented screws and cylinders (2x x 58 mm / 26D), screw speed: max. 900 rpm, degassing, vacuum pump, BKG underwater pelletizing system OPTI-LINE 1 consisting of: Kreyenborg start-up, water box, cutting head, water circulation system, heat exchanger, process water tank, centrifugal Control: Siemens S7 with visualization

Industrial Gearboxes, Planetary Gearboxes used Manufacturer: SEW Type: XP3FH160/F Year of construction 2020 Power 358-717 kW Torque max: 297711 Nm i=81 n1 931-1863 rpm n2 11.5-23 rpm Shaft drive Ø 100 mm Shaft output see pictures 7200 kg The gearbox comes from a spare parts warehouse and is unused. You can find the right oil cooler here. Possible applications: Conveyor technology -- > drive of large conveyor systems (e.g. opencast mining) Mixers/Extruders -- > Plastics or Asphalt Processing Shredders -- > recycling plants or industrial crushers Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Weibert ADH 410C Abrichtdickenhobel Dressing table (LxW): 1640 x 425 mm Thick table (LxW):600 x 410 mm Working height 850 mm Thickness: 5-225 mm Max. chip acceptance 3 mm Planing shaft diameter: 70 mm Planing knife 3 Speed 5200 rpm Feed 7 m/min Engine: 3 kW 400 V 50HZ Suction nozzle diameter: 120 mm Weight 260 kg G&STÜ-5904041

It is a new V MIX 100 planetary stirring machine (max. 100 liters) for sale. specifications: - Continuous speed change - inverter control - Programming 20 mix recipes - Programming the mixing time - Automatic lifting of the bowl - incl. 3 x tools - incl. 1 x boiler (100 liters) - 12-month warranty A video can be sent on request. Price on request.

We sell a baguette system of the company JAC type BA 402 incl. baguette long scooter. Used and refurbished.

Distillation plant for WFI water or pure steam generation Manufacturer: DEWA Type DP 30 EVS Distillation or pure steam plant this system can be used to produce either distillate or pure steam. Production 30 litres/h Feed water consumption 35 l/h Cooling water consumption system at 95 °C Destwasser 200 l/h electric heating capacity 18 kW max. operating pressure 1.9 bar min. cooling water pressure 1.0 bar min. feed water pressure 1.0 bar min. pressure for control air 6.0 bar Total capacity evaporator approx. 27 litres Evaporator capacity at max. level approx. 11 litres Dimensions: Height 2240 mm Width 970 mm Depth 700 mm Empty weight 300 kg

We sell several 20 foot office and stay containers of different designs at reasonable prices. There are single containers, double containers, triple containers and quadruple containers. The containers are partly equipped with office furniture or cabinets. The location of the containers is Belgium. But we can organise mining and transport. Basic dimensions of the container length approx. 6055 mm, width approx. 2435 mm, height approx. 2350 mm. Price from 1500,- € + VAT depending on the number of units and execution.

COMPLETE GRANULATION LINE Products: glass, clay, fertilizers; Working system; Productivity: 15,000 tons/year in 2 work shifts with 2 workers per shift; CE marked; Main components: • D1 - Raw material loading hopper for storage of raw material loaded by wheel loader – 15 ton/h; • P1 - Disruptor/Crusher - Crushes any aggregates of various sizes present in the raw material arriving from D1 – 15 tons/h; • R1 - R24 Granulator Mixer - mixes and granulates the raw material from P1 and discharges the wet product into the hopper – 8 ton/h; Main components: • B1B Fluid bed dryer - Dries wet granules from R1 - 8 ton/h; • T5 - Vibrated tubular duct with loading ports - Transport of dried granules and fine powder respectively from B1B the dust discharge rotocell from the PD4 filter to the P5 vibrating screen; • P5-Vibrating Screen - Selects the dried ...

Brand new wooden powder trays for mogul plants, quality, long-life cycle, material, precision analog to Treiber, stackable, appropriate for all mogul lines, tested for NID, W&D, MAKAT, BOSCH, partially already certified by the manufacturers of the line send your price inquiries to company SCHOKOMA GMBH indicating quantity of trays, bottom material, dimensions inside and outside, delivery possible

Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Handover: in its current condition as inspected -Adjustment screws: damaged, see photos -Faceplate: Chuck size Ø 127 mm -Hole: Ø 57.2 mm -Pitch circle: -Through hole: Ø 28 mm -Dimensions: 127/127/H90 mm -Weight: 3.8 kg

Wet acceptance system, swimming / sinking system, swimming / sink container with discharge belt, belt scrubber, belt washing machine for fruit and vegetables used Manufacturer: SCHNEIDER Maschinentechnik Type NA 650 Filling height approx. 2 m Funnel approx. 2.4 x 1.9 m Depth to the band approx. 1.2 m Bandwidth approx. 600 mm Drive via infinitely variable gear motor Total dimensions: approx. 4 x 2.1 x 3.1 m The plant was used in fruit and vegetable production. Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

CATALOG NUMBER 5843 TECHNICAL DATA - shaft width 510mm - 3-knife shaft - shaft cover - length of the tops 2530mm - cast iron tops - both adjustable tops - cast iron guide adjustable at an angle - 3kW engine - dimensions length / width / height 2530x900x1000mm - weight 897 kg ADVANTAGES - Italian production - used planer - intended for professional use Net price: PLN 11500 Net price: EUR 2738 depending on the price EUR 4.20 (Prices may change with higher fluctuations)

PARKER PSA Nitrogen Generation Plant – 600 Nm³/h – 99.5% Purity (2016-2019) Complete industrial PSA Nitrogen Generation Plant designed for continuous 24/7 operation, producing high-purity nitrogen directly on-site. The plant is based on Pressure Swing Adsorption (PSA) technology and includes air compression, air treatment, nitrogen generation and storage systems, delivering up to 600 Nm³/h of nitrogen at 99.5% purity with fully automatic operation. Technical Specifications. • Technology: PSA (Pressure Swing Adsorption) • Manufacturer: Parker - Nitromatic • Nitrogen production capacity: 600 Nm³/h • Nitrogen purity: 99.5% • Maximum nitrogen outlet pressure: 7 bar(g) • Continuous operation: 24 hours/day • Fully automatic operation • Integrated alarm and monitoring system • Continuous oxygen analyser with purity display • Ultra-dry nitrogen produ ...

1 of used bottling line for beer, consisting of loading table, Harlands Proteus single-station wrap-around pressure-sensitive labeller, Moravek BF15 sterile filter, Moravek BC15 carbonator, Moravek 12/12/1 rinser / filler / crowner, Linx CJ-400 ink-jet coder, Cheops tray/pad loader with shrink-wrapper, interconnecting conveyors. Used for 330 ml (D 60.7 x H 227 mm), speed 2.500 - 3.000 bph, and 500 ml (D 69 x H 245 mm) speed 2.200 - 2.500 bph, packed as either 4x2=8 or 6x4=24 bottles per tray or pad. Equipment new 2015.

A large-format wood impregnation plant by Wichmann-Metallbau is available. Nominal volume: 28m³. An on-site inspection is possible.

Specifications Spindles: 2 Spindle arrangement: Bottom (5.5 kW) – Top (5.5 kW) Working width: 220 mm Working height: 120 mm Feed: 3 kW // 32 m/min Spindle diameter: 50 mm Jointer Counter bearings Short Parts Package

x-travel: 3.400 mm y-travel: 1.250 mm z-travel: 2.000 mm Control: TNC-430PA table-size: 4.700 X 1.200 mm V- travel: 500 tool taper: ISO 50 milling head -swivable: 0.001º/0.001º Grad main drive: 37 kW Chip coveyor: inkl handwheel: HR-410 Tools changer: 60 pos. milling head: Automatic Head 45º weight of the machine ca.: 35 t - Automatic Head 45º INCLUDED - Automatic Head 45º 0.001º/0.001º - Head 45º Max. Speed 3.000 rpm - 45º Head Taper ISO-50 - Twist Head Contiuous INCLUDED - Twist Head Max Speed 3.000 rpm - Twist Head Taper ISO-50 - Ram with Quill - Quill Diameter 150 mm. - Quill Taper ISO-50 - Pick up station AITEK for 45º and Twist Heads - Rotary Table ZEATZ Ø 1200 INCLUDED - RENISHAW MP 16+SP2/1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Masa Stone Making Line Year of Make: 2001 Consisting of: - Mixing plant - Colormix - Kübelbahn - Stone paver - approx. 3600 production boards 1400x1100mm - Aerial ladder with 22 shelves - Transfer table - Countersunk ladder - Packager - Brettpuff The drying chamber is not for sale Second-hand Masa block-making plant Year of manufacture: 2001 Consisting of: - Mixing plant - Colormix - Bucket conveyor - Block-making machine - Approximately 3,600 production boards, 1,400 x 1,100 mm - Elevator with 22 levels - Sliding platform / Finger car - Descending conveyor / Lowerator - Packager - Board buffer The drying chamber is not for sale

Specifications Spindles: 2 Spindle arrangement: Bottom (5.5 kW) – Top (5.5 kW) Working width: 220 mm Working height: 120 mm Feed: 3 kW // 32 m/min Spindle diameter: 50 mm Jointer Counter bearings Short Parts Package

I am happy to offer for immediately: SCM - Moulder with 9 spindles and SCM Control 100 PC control of all spindles SCM Model Topset XL 323 Offer type: Used machine Availability: immediately Location: in the warehouse General condition: cleaned, maintained, function tested, partially repainted Year of Make: 2005 Max. working width 240 mm Min. working width 25 mm Max. working height 120 mm Min. working height 10 mm Minimum length 640 mm Feed speed 6 - 36 m/min, variable Shaft speed 6000/ 8300 rpm Shaft diameter 40 mm Vertical shaft useful length 140 mm Useful length horizontal shafts 250 mm Axial adjustment of vertical shafts with respect to work table 0 - 80 mm Axial adjustment of the horizontal shafts in relation to the right guide 0 - 45 mm Min and max. DM of the profile tool 100 - 220 mm Min. and max. DM of the tool on the planing shaft 120 - 140 mm Profile ca ...

incl. RITTAL operation, also two oil drum racks from the manufacturer BAUER Auction-ID: A7-49089-153