138,255 used machines on RESALE, but how to find them? Machine Search
Compounding system with GALA underwater granulation Material: PE, PP, PS, ABS // Details: segmented screws and cylinders, screw diameter 2x 40 mm, L/D 44, DC rotor, DC motor 104 kW with gearbox, worm speed: max. 1,200 rpm, 2-fold degassing, ground pressure transducer, start-up valve, water box, Gala A1PAC6 underwater granulation with water circulation system and centrifugal dryer, temperature control unit SINGLE STW 150/1-6-100-NS/E, 6-fachimetric dosing incl. control. Control: Macromatex. Power: approx. 200 - 400 KG/hr
Plasma hose assembly, welding torch, MIG/MAG torch, hand-held arc torch, gouge, gouge nozzle -Harris: FAG3 jointing nozzle -Pressure: 6.0 - 7.0 bar -Price: per piece Quantity: 6 pieces -Dimensions: 100/19/H19 mm -Weight: 0.1 kg/piece
used wood carburetor Plant Bj 99 with control cabinets and Perkins gas engine, Generator Stamford 670 kVA Plant was only in operation for 6 months also associated wood chip drying plant available
Grease baking device Jufeba TK-2000 -Fat baking device Jufeba -Type: TK 2000 -20 kW -Outside mass: 198x91cm -Basin inside mass: 194x87cm
Faceplate, faceplate chuck, four-jaw chuck -Hole size: Ø 408 mm -Mounting thread: M95 x 6 mm -Weight: 52 kg
Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 400 mm -Cone size: 6 -Short cone mount for: bayonet disc -Short taper mount: Ø 106.375 mm -Bolt circle: Ø 133.4 mm -Through hole: Ø 90 mm -Weight: 51 kg
Grease baking device Roka plant Tippfix Model DA 900 -14.4 kW -Outside mass: 80x204cm -Basin indoor mass: 70x194cm
used
Residual item material from inventory sale for solar free-surface plant Screws, nuts, cable clips, washers, mid and end terminal profiles Package price
Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 355 mm -Internal thread diameter: 69 mm -Weight: 24 kg
used
Complete LVL Plant Don't hesitate to keep in touch with us for further information.
used
Complete Particleboard Plant Don't hesitate to keep in touch with us for further information.
Faceplate, faceplate chuck, four-jaw chuck, facing chuck -Mouth size: Ø 500 mm -Short taper mount for: bayonet disc attachment, taper size 8 -Bolt circle: Ø 171.4 mm -Weight: 96 kg
Faceplate, faceplate chuck -Mouth size: Ø 500 mm -Camlock: Short taper flange, taper size 11, bolt circle Ø 235 mm -Weight: 67 kg
Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 440 mm -Weight: 74 kg
Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 400 mm -Conical mount with groove: Ø 105 mm -Passage: Ø 80 mm -Weight: 35 kg
Plan knife head, knife head in wooden box Manufacturer Tizit (today CERATIZIT - Group) Type Max Mill Plansee Diameter approx. 255mm 14 inserts Diameter tool holder 60mm Hole circle for recording approx. 100mm Number of holes 4 pieces Accessories: 33 inserts, torx key Milling Knife Head Comet Sandvik Coromant Klenk Insert Turning Tools EcoCut cutting tools Insert milling tools Tools with high-hard cutting materials Special price
Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 400 mm -Short taper mount: Ø 106 mm -Bolt circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 30 kg
Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 750 mm -Short cone: 8 (Ø 140 mm) -Bolt circle: Ø 171 mm -Weight: 248 kg
3 x 2.5 MW complete HFO power plant , MAN ( SSANGYONG ) 12V8/32H coupled with AVK generator 3.3KV / 50 Hz , Year : 1997-2000 Running hours : 34,000~44,700 hrs
GAI vacuum filler + 1 screwdriver head Capacity: 18,000 b / h - 20 ml, 12 fillers
The extrusion line was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system ...
Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 460 mm -Cone mounting: Ø 100 mm -Threaded mounting (outer): 152 mm pitch 6G 1 3/8 1 1/2 -Through hole: Ø 84 mm -Weight: 56 kg
Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating - main extruder (CoEx) without coating - coating processing over winding unit on an existing base film For production in the different described combinations you can lock the not necessary equipment parts. POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film - 3- layer film (A-B-A) if necessary with tensilized film Coating unit: - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg MAIN EXTRUSION UNIT To ...
Pressure filler SEITZ TIRAX SF12 For normal and sterile filling of still and carbonated liquids at a filling pressure of up to 5 bar and for hot filling. Operating pressure: 5 bar 12 digits infinitely adjustable Capacity approx: 300 to max. 800 bottles/h Dimensions and weight: H x W x D: 2400 x 940 x 1120 mm Weight: 615 kg Operating instructions and spare parts list available!
Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Admission wheel recess: Ø 160 mm -universal: applicable -Number: 2x motors available -Price: per piece -Dimensions: 190/190/H342 mm -Weight: 70 kg/piece
Bread round and long-wred machine Kemper Superba used Kemper bread round-wire and bread-long-wifting machine for sale immediately in stock. -Band round wire 270cm long -with Kemper SUL
Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 450 mm -Conical mount: Ø 110 mm -Groove: 16 mm -Weight: 66 kg
Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 560 mm -Photo: Short cone 11 -Bolt circle: Ø 235 mm -Through hole: Ø 140 mm -T-slot: Slot width 22 mm -Weight: 109 kg
Kemper Becherwerk for bread plant Type: BE 11 Possible applications in all dough processing lines transport also of soft dough space-saving design optionally 1 or 2 pieces of dough Crossband left-hand run / crossband right-hand-running
Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 445 mm -Through hole: Ø 77 mm with thread pitch 4 mm, see photo -Weight: 34 kg
Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH211 SN 6.2 -Dimensions: see photos -Total dimensions: Ø 230 x 190 mm -Weight: 30 kg
Table length: 10.800 mm Table width: 1.000 mm Table height: 200 mm Load capacity: 10 t/m Power motor spindle: 22 Kw Max. speed of turning: 1.700 rpm X Axis travel: 7.000 mm Vertical axis travel: 2.000 mm RAM travel: 1.000 mm Total installed power: 60 Kw Rapid feed rate: 15 mt/min CNC ECS 4801 Chip conveyor
Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH201 S 6.2 MO A16B -Dimensions: see photos -Total dimensions: Ø 230 x 178 mm -Weight: 29 kg
Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH201 S 6.2 MO AS -Dimensions: see photos -Total dimensions: Ø 230 x 178 mm -Weight: 29 kg
Riding track planner, riding area planner, railway planner / Tennenplatz care equipment, working width approx. 1.80 m, consisting of three-point mounting frame with 2 rows of adjustable double spring tines, height-adjustable equalizing shield and screwed wear rail (steel 10x80 mm) and adjustable lattice roller (diameter approx. 400 mm) with cushioned scraper.
planer, electric planer -Manufacturer: Black & Decker, electric planer type SR 600 -Speed: 14500 rpm -Nominal power consumption: 500 watts -Dimensions: 400/150/H140 mm -Weight: 3.3 kg
Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 450 mm -Reference: Short cone 6 (Ø 102-105 mm) -Bolt circle: Ø 133 mm -Through hole: Ø 80 mm -Groove width: 18 mm -Dimensions: Ø 450 x 200 mm -Weight: 65 kg
Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 200 mm -Mount: Short cone 4 / Cone Ø 61-63 mm Short cone flange with camlock fastening -Bolt circle: Ø 82 mm -Through hole: Ø 41 mm -Dimensions: Ø 200 x 125 mm -Weight: 9.5 kg
VELO flotation system PRI 100 for clarifying grape musts Capacity: 20.000l/h UNI-DEPP-KAR Manufacturer: VELO S.p.A. Type: PRI 100 Year of construction: 1998 Fabr.No. V6226 Capacity: 20.000l/h mobile with compressed air generator Measurements: Height: 2180 mm Length: 1500 mm Width: 1220 mm All the equipment s. photos
1. Screen changer "Kreyenborg" K-SWE 180 2. Water ring granulation "AGRIFON" 3. Classification sieve for the separation of Granules over-good and lower grain sizes Throughput: Depending on material mix , 500 kg/h
1 used Framax Tribloc bottle filler, built in 2012, consisting of Borelli 9-digit rinser and 8-digit low vacuum / gravity filler type CIAO-xp with 1-digit Arol Eagle C 26 mm crown corker. Plant last used for filling beer (bottle fermentation) in 61 mm diameter 330 ml as well as 71 mm diameter 500 ml glass bottles at an output of 1,920 bottles/hour. Filler also suitable for bottling wine.
Electrode clamp with air connection for electrode tool, electrode welding machine, joint planer, joint planer -Manufacturer: Kurt Haufe, Joint Planer Type K 12 B 600 -Cable length: 3 m -hollow cable -Number: 2x joint planers available -Price: per piece -Transport dimensions: Ø 450 x 90 mm -Weight: 3.2 kg/pc.
Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 560 mm -Bolt circle: Ø 170 mm -Through hole: Ø 90 mm -Reference: Short cone 8 (Ø 136-139 mm) -Dimensions: Ø 560 x 200 mm -Weight: 77.3 kg
1 of used Framax tribloc bottling machine, new 2012, consisting of a Borelli 9-head rinser / 8-head low-vacuum/gravity filler CIAO-xp with single-head Arol Eagle C 26 mm crowner, Last running bottle-conditioned beer at 1.920 bph with handling parts for 61 mm diameter 330 ml and 71 mm diameter 500 ml glass beer bottles. Filler also ideally suitable for bottling wine.
Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 380 mm -4 jaw chuck -threaded mount -Weight: 40 kg
Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 560 mm -Short taper mount: Ø 122 mm -Bolt circle: Ø 170 mm -Weight: 100 kg
maximum number of results exceeded
please refine your search
