labor used for sale

PERTEN Inframatic Type Percon 8100 Checked by an PERTEN expert Sample measurements done. The device has been pre-adjusted. For final use, a recalibration with reference samples is required.

We sell a stone press for laboratory purposes. The press is in the very good clean condition. The press is however without control and without cooling unit. Stones can be pushed down with the stone press (breaking load tested). The machine is vorführbar on a tour. Also she has been tested every year!

Vacuum homogenizing system, make Becomix Type RW 2.5 Mobile table version with anchor stirrer, vacuum pump, steering, etc. Utility room: Operating temperature 100 ° c. Pressure-1 / + 1 bar, vacuum Content 5 litres Boiler room: Operating temperature 110 ° C Pressure 4 bar 4.8 kW Contents 2 litres

1 BENZ laboratory jigger type LJ 250 TM, roller width 230 mm

with Ultra Turrax T25 Vacuum pump with controler IKAVAC Heater Huber Control unit RE 1621 l P various spare parts Operating manuals Dimensions LWH: 1200 x 800 x 860 mm Weight: approx. 100 kg

No.: 851275 with speed-controlled feed pump Funnel in Exx protection with switchgear good condition Dimensions LWH: 700 x 700 x 700 mm Weight: approx. 100 kg

No.: 56218 Power: 4 kW with hose pump and control cabinet highly specified, as good as new

n1-n2= 60-2000 rpm 220 V 50 Hz Dimensions LWH: 300 x 300 x 90

n1-n2= 60-2000 rpm digital 220 V 50 Hz Dimensions LWH: 300 x 300 x 90 mm

n1-n2= 50-2000 rpm 220 V 50 Hz Dimensions LWH: 300 x 300 x 90 mm

No.: 50116 n1-n2= 60-1100 rpm 112 W 220 V 50 Hz on tripod Dimensions LWH: 300 x 300 x 900 mm

10 000 rpm 600 W 220 V 50 Hz Dimensions LWH: diameter 110 x 600 mm

n1-n2= 50-6000 rpm without speed controller, without switch Dimensions LWH: 200 x 100 x 500 mm

n1-n2= 40-1400 rpm 220 V 150 W 50 Hz Dimensions LWH: 200 x 100 x 500 mm

n1-n2=25-2000 rpm 220 V 25 W 50 Hz 0.3 A

shaking machine, laboratory sample vibrators, Manufacturer Gerhardt Type Laboshake LS500 Very good condition, ready for immediate use 230 Volt 800 watts Lcqmcmwr

Pulverisette, Analysette, Laboret 03.502 Lab vibrators according to posted photos. With lid and straps, scope of delivery according to photos. Programs: -Inter -Perm -Micro Adjustable Bfukypvbsu

Laboratoriehomogenisator,LB 400 for 50-400 ml prøveposer med timer funktion.

KEN 2311-HOS laboratory dishwasher KEN 2311-HOS is a compact cleaning and disinfecting device. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and breathing tubes, surgical shoes, as well as bottles, trays, glassware. There are several versions: single-door and two-door (through) models. Continuous machines are always preferred because the physical separation of "dirty" and "clean" areas optimizes the hygienic environment and reduces the risk of cross-infection. ■ User-friendly control panel - ensures correct operation ■ Possibility of individual programme choice. 4 programs as default ■ Process indicator bar shows how far the program has progressed ■ Double monitoring of temperature (EN/ISO 15883) ■ Connection of 2 t ...

KEN 2311 Laboratory dishwasher KEN 2311 is a compact cleaning and disinfecting device. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and breathing tubes, surgical shoes, as well as bottles, trays, glassware. ■ User-friendly control panel - ensures correct operation ■ Possibility of individual programme choice. 4 programs as default ■ Process indicator bar shows how far the program has progressed ■ Double monitoring of temperature (EN/ISO 15883) ■ Connection of 2 types of chemicals ■ Lockable lower compartment for storing chemicals Specifications Mains connection 3 x 400 V,N,J, 50Hz Connected load/fuse 10kW/16A Water connection Cold untreated water: 1 piece, 3/4" RG, 5-30°C, 0-30°dH Water connection Hot so ...

KEN 311-OS laboratory dishwasher High Capacity Laboratory Dishwasher The flexible machine for laboratories with high rinsing requirements The KEN 311-OS covers the need for quality washes in laboratories Advantages Washing instruments in up to 2 levels at once High capacity User-friendly and ergonomically correct front operation Front display with plain text Low noise level Low energy and chemical consumption for the benefit of the environment and the economy Minimal maintenance and servicing Specifications: Height 140 cm Width 60 cm. Depth 64 cm. Electrical connection 400 Volt 3N 50 Hz Power 10,1 kW Condition: This device was removed in working order due to a closure of a site and has been stored ever since. It seems to be in very good condition. Unfortunately, we do not have the knowledge or tools to test the device further and Therefore, this device  ...

KEN 211-OS laboratory dishwasher High Capacity Laboratory Dishwasher The flexible machine for laboratories with high rinsing requirements The KEN 211-OS covers the need for quality washes in laboratories Advantages Washing of instruments in up to 2 levels High capacity User-friendly and ergonomically correct front operation Front display with plain text Low noise level Low energy and chemical consumption for the benefit of the environment and the economy Minimal maintenance and servicing Specifications: Height 140 cm Width 60 cm. Depth 64 cm. Electrical connection 380 Volt 3N 50 Hz Power 6,6 kW Product condition: Condition: Without plug ? More items - new and used - can be found in our shop! International shipping costs on request!

Spectrophotometer DATACOLOR Spectroflash SF450, with 2 SF 350 units, 3 IBM PC's with programs and 3 calibration tools

METTLER RE 50 REFRACTOMETER

Heidolph Polymax 1040 with incubator 1000 and high incubation hood. Offered here is the platform shaker with tumbling movement with temperature-controllable, high incubation hood. It is a package of the following devices: - Polymax 1040 - tumbling platform shaker with 2 - 50rpm, continuous operation and timer function (max 120min) - Incubator 1000 - nominal temp display, actual temp display, adjustable temperature up to 65°C - Incubator hood, high The Polymax has a single-sided, dismountable and completely removable attachment, consisting of two vertical, screwed anchor pins and a height-adjustable, padded grab bar. The incubator hood is damaged at the left, front corner. An edged aluminum plate was glued over the damaged area and screwed into the floor. This repair is professional and not a backyard screw. I am happy to send detailed photos. The device can be vi ...

Puranity PU 20 in complete working order but needs new filters. Intended use Increasingly sophisticated technologies, continually lower detection limits in laboratory analysis, and the requirement for biologically-pure water in research correspondingly require the water used to be of ever higher quality. The novel Puranity PU 20 line of water purification systems has been developed to produce such ultrapure water, as well as to fill the needs for userfriendly systems and complete solutions Puranity PU 20 ultrapure water systems produce salt-free, organically-pure particle-free and sterile filtered ultrapure water. To make full use of the long and economical service life of the high-quality purification media, the feedwater for Puranity PU 20 systems must be pretreated by an appropriate purification step (reverse osmosis, ion exchange or distillation. Application areas - An ...

Laboratory refrigerator Liebherr LCexv 4010, combination device, explosion-proof interior in accordance with the ATEX directive for the storage of explosive and highly flammable substances. Electronic temperature control with 0.1°C temperature display to the degree enables the most accurate temperature settings Built-in data storage with AlarmLog Two independent regulators and two compressors for optimum functionality and rapid cooling rate after door openings 1-point calibration SmartMonitoring Ready via RS485 interface potential-free alarm contact for connection to central building control centers Access for temperature sensor (Ø 10 mm) Practical drawers (in the freezer compartment) with transparent front for a clear view of the stored goods The doors are self-closing for convenient operation, the door hinge can be changed and the clamp seals are replaceable

Company specialized in food safety sells a Beckman Coulter Biomek NX S8 + ThermoFischer Cytomat + Workstation (PC+Screen+Keyboard+Mouse) as it is.

Macro and micro manipulation inverted microscope system Narishige brand joystick model. Used in assisted reproduction. Year of purchase 2013. Used very little, in perfect condition. The inverted microscope and the laser are sold separately.

Manufacturer: MILESTONE Serial number: 1301110705000210 Year of production / purchase: 2008 Detailed information describing how to operate in the attached pdf file

412590 VIDAS 3 INSTRUMENT biomerieux It has only been used for one year only

Nikon brand inverted microscope model eclipse T1. Year of purchase 2013 approximately. In very good condition, used very little. Joysticks and laser are sold separately. Use in assisted reproduction.

OCTAX brand laser and laser pedal. Used in human assisted reproduction, in perfect condition it has been used very little. Year of purchase 2017

Laboratory homogenizer,LB 400 for 50-400 ml test bags with timer function.

I have no information about the year of production. However, the incubator may have never been used. It is clean inside and out. Controls and calibrations have been made. There is no problem.

Reliable results: THE BRABENDER Amylograph ASG 6 is in top condition Tested and adjusted in the laboratory company CAB Meerwaldt

BRABENDER Moisture Analyzer Semi-Automatic HA with adjustment thermometer and 10 sample trays, overhauled and adjusted by the laboratory specialist CAB Meerwaldt Control thermometer and weight set new, Sekutest DGUV V3, calibrated 2022 Original tare scale ± 50 mg from Brabender included

6-piece sedimentation oscillator with watches New condition, never used

Roller width: 350 mm roll diameter: 110 mm Roller covering - soft rubber: 70 Grad shore rubber: NBR - Qualität air pressure: max. 4 bar Pressure line: 28 N / mm Capacity of dye tub: Becken - 1,3 Liter Capacity of dye tub: Zwickel - 0,3 Liter Speed driven roll: 0-25 U/min speed: 1 - 10 m/min voltage: 230 V / 50 Hz drive motor: 0,4 kW weight: 130 kg dimensions: 1050 x 800 x 810 mm • 2-roll-laboratory padder for horizontal and vertical roller-arrangement. • The change from horizontal to vertical of the roller arrangement can be effected by easy re-allocation of the upper squeezing roll with the pressure cylinders, • small trough • with controllable motor drive, drive for both rolls. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3 laboratory centrifuges from Hettich / Tuttlingen Operational

Laboratory Centrifuge from Eppendorf Operational

Dishwasher, thermal disinfector, disinfector, laboratory dishwasher, 130 kg, comes from a school, price ex works

Description

Description

Description

Description

Laboratory Chamber Furnace with controller, T.max °C: 1200, 3.7kW, Inside dimension in mm (wxdxh) 250 x 400 x 250 equals 25.0 liters.

It has a cylinder for 10 to 135 T and a small additional cylinder for 1500 kg to 7 T. Empty run with 2-10mm second Pressing speed 2 mm second Table size 1100x650x120mm 800 mm maximum open height Table height max. 900 mm Travel of the cylinder is 400 mm Total height 2900 mm Weight 2.3 T 200 L tank Pump with 60 L output 5 KW main motor Control system PLC SIEMENS or PILZ RSS4000- S 7 1200 Safety control PILZ Communication Operator/Press Coloured Touch Screen 10" OMRON/SIEMENS

Welding fume extraction, soldering extraction, laboratory extraction High vacuum Torch extraction FUMATOR-APPARATEBAU HEINZ WAGNER Type Minivac 250 D series. No. 2902619 Year of construction 2004 Unit air volume flow max. 250 m3/h Minimum air volume flow rate min. 100 m3/h Separation efficiency 99.97 % Welding fume class W3 Motor power approx. 0.75 kW Mains connection 230 volts, 50 Hz - Suction power infinitely adjustable - 2 pieces Suction connections 45 mm - mechanical air filter (used) - mobile underframe with 4 fixed castors, platform roller Space requirement L x W x H 700 x 500 x 600 mm Weight suction 35 kg Weight platform roller 7 kg good condition; used

Laboratory centrifuge