labelling machines krones used for sale

Tensile testing machine Manufacturer: Karl Frank GmbH Type: 81559 Year of construction: 1980 Duck test: height: 1000mm, width: 400mm, depth ungraenzt Force ranges: 2000N, 1000N, 500N, 200N, 100N, 50N Original price at that time: 49.855,00 DM ATTENTION: The device has not been tested for functionality. All information without guarantee

Book Back Rounding Machine Machine No.: 520

Auction-ID: A1-50347-74

Rated power at 50%ED: 35kVA Short circuit current: 19kA Electrode force: 300daN / single stroke Projection: 395mm --- Welding control: WS 708 (7 times, 8 program) --- Incl. additional options: - Foot switch - Pressure-free lowering of the upper fitting - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Auction-ID: A1-50347-72

DOOSAN PUMA 4100A CNC Lathe • Manufacturer: DOOSAN • Model: PUMA 4100A • Year of Manufacture: 2016 • Country of Origin: South Korea • Machine Type: Heavy-Duty CNC Turning Center • CNC Control: FANUC • Chuck Size: 12 inch • Swing Over Bed: Ø790 mm • Swing Over Saddle: Ø590 mm • Maximum Turning Diameter: Ø550 mm • Recommended Turning Diameter: Ø315 mm • Maximum Turning Length: 1,074 mm • Bar Working Capacity: Ø102 mm • Maximum Spindle Bore Diameter: Ø115 mm • Spindle Nose: ASA A2-11 • Maximum Spindle Speed: 3,000 rpm • Spindle Motor Power: 35 / 26 / 22 kW • Maximum Spindle Torque: 1,584 Nm • Spindle Gearbox: 2-Speed Gearbox • X-Axis Travel: 352 mm • Z-Axis Travel: 1.105 mm • Rapid Traverse, X-Axis: 16 m/min • Rapid Traverse, Z-Axis: 20 m/min • Turret Capacity: 12 Stations • OD Tool Size ...

Industrial resistance spot welding machine from TECNA for the production of reproducible spot welded joints. The machine is equipped with pneumatically operated electrodes, electronic TECNA TE 91 welding control with adjustable welding parameters, water cooling and foot switches for operation. The compact design is suitable for production, assembly and workshop applications. Technical data: Manufacturer: TECNA S.p.A., Italy Equipment Type: Resistance Welding Machine / Spot Welding Machine Model: TECNA Art. 2102 Year of Make: 2011 Serial number: 08359 Control: TECNA TE 91 Mains voltage: 400 V Frequency: 50 Hz Phases: 1 Rated power at 50% duty cycle: 20 kVA Max. welding power: 62 kVA Secondary open-circuit voltage: 4 V Max. secondary short-circuit current: 19 kA Max. electrode force: 187 daN (approx. 1.87 kN) Required compressed air pressure: 6.5 bar Drive electrodes:  ...

specifications: - Pressure capacity 100 KN / 10 t - Compressive force adjustable 0 - 100 kN - Stroke length 0 - 150 mm - Clear width approx. 200 mm - Lifting speed 0 - 0.6 m/min - Tool height up to approx. 100 mm - Bending performance - with prism MW 100 flat to approx. 100 x 12 mm - Tube bending up to approx. 1 inch - Directional power Wy at straightening block distance of 1m 100 cm³ - Drive 400 V / 1.1 kW - Space requirement approx. W 1100 x H 1000 x D 650 mm - Weight approx. 400 kg

Auction-ID: A1-50643-142

Max. speed: 7500rpm, voltage: 230V, current consumption: 8.6A, frequency: 50Hz, power: 2000W. The machine can be controlled using a standard computer. The A-axis can be controlled and positioned via the software. Including software/CD. Without PC. An on-site inspection is possible.

Max Size 520 x 850 mm Min size 100 x 120 mm 4 Buckles Noise hoods High speed feeder head Digital counter with program 1 Electronic knife Hook on shingle belt delivery Implant machine Very good conditions

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-600 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t Version as built by Kellenberger until 2012. Partly overhauled with a warranty period of 12 months after delivery in Germany and neighboring states. Overhauled and geometrical overhauled according to Kellenberger measuring protocol. optional internal grinding attachment up on request - digital display in x-a ...

CSM CNC38TBRE tube and profile bending machine was built in 2008 in China by CHIAO SHENG MACHINERY CO., LTD. The machine is designed for the precision bending of tubes, profiles and bars with a maximum diameter of 38 mm. It enables the production of parts with various shapes and bending radii, used in many industries. A maximum bending angle of 190°, combined with a wide range of bending radii, enables the production of both tight bends and parts with larger bending radii. Bending accuracy of ±0.01° ensures high precision and repeatability of the workpieces. The CSM CNC38TBRE is equipped with an intuitive CNC controller that facilitates day-to-day operation of the machine. The control system features a large memory capacity, allowing numerous user programmes to be stored. The CSM CNC38TBRE tube bending machine weighs 2500 kg. Technical specifications of the CSM CNC38TBRE tube be ...

Reference ID PP-61911 Category Flatbed Die Cutter Manufacturer Bobst Model SP 102 E II Year Built 2000 Color - Impression - Working Hours 63000 Speed - - Max. size 720x120 mm Min. size 350x400 mm Condition Good Location Europe Availability Immediately Machine Description Feed Table, Die-Cutting Section, Stripping Section, Delivery with Non-Stop Rack, Centerline System, BOBST Electronic System, Standard Equipment Die-Cutting: Upper Chase E-001; Lower Cutting Plate E-004 (4 mm); Lower Support Plate with adjustable centering. Stripping: Upper Stripping Frame F-002 with tooling F-021/F-022; Quick Locking Device F-076; Lower Stripping Frame F-008 with tooling F-081. B-007 Standard-height platform without pile changer (1) E-001 Upper chase, screw-fixed (4) E-002 Removable upper chase (1) E-005 Compensation plate 3 mm (1) E-055 Adjustable centerin ...

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 6 total power requirement: 7,5 kW weight of the machine ca.: 4,340 t dimensions of the machine ca.: 3830 x 1160 x 1180mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 8mm total power requirement: 15 kW weight of the machine ca.: 9,7 t dimensions of the machine ca.: 5310 x 1660 x 1590 mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 133 mm injection shot weight in Polysterol: 5940 g/PS closing pressure: 8000 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 115 mm injection shot weight in Polysterol: 3915 g/PS closing pressure: 6600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: siehe TD total power requirement: 18,5 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4260 x 1660 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-48746-286

Auction-ID: A1-48746-95

GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring system Spindle speed 15,000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp / 21.5 hp) Torque 111 Nm / 85 Nm (82 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110 ...

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: siehe TD 0: 20mm (s) Ampullen/h 0: mm 0: mm total power requirement: 22 kW weight of the machine ca.: 9,2 t dimensions of the machine ca.: 4260 x 1660 x 1590 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 800 x 700 x 1200mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralUniversal Milling Machine; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20 - 20000 rpmSpindle taperSK40 Tool holder DIN ISO 7388-1-A Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring system Spindle speed 20,000 rpmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 20,000 min-1 At speed 18.000-20.000 min-1 SK40 – BIG-PLUS® stipulated Output 35 kW / 25 kW (47 hp / 33.5 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63.5 ft lbs) (40 / 100 % duty cycle) NC swivel rotary tableSwivel Rotary Table for simult ...

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS X with Siemens SINUMERIK ONE Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgNC swivel rotary tableTable surface Ø650 mmCentre bore 32 mmMaximum load (table centre) 600 KgSlot width 14 mmNumber of Slots 9 Distance between T-Slots 63 mmRotation speed max.4. Axis 40 rpm4. Axes (swivelling range) 360 x 0,001 degree5. Axes (swivelling range) +/- 120 degreeRotation Speed 5. Axis 20 rpmIntegrated motor spindle speedMASTER ...

GeneralHorizontal universal machining center; Control: CELOS X with Siemens SINUMERIK ONE Working area 1Longitudinal650 mmCross700 mmVertical950 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabin Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSK Stop block + 3-point-supportStop block + 3-point-support Design according to DECKEL MAHO Standard Package Mill / Turn HSK-A 63Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Table plate C-axis d 680 mm / 26.8 in Speed C-axis max. 1.200 min-1 Integrated balancing sensor Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 m Kinematics axis A / C for swivel rotary tableAxis kinematics A/C for swivel rotary table Axis designation swivel axis: ...

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 8mm total power requirement: 15 kW weight of the machine ca.: 14,1 t dimensions of the machine ca.: 6310 x 1660 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 13mm total power requirement: 22 kW weight of the machine ca.: 21,3 t dimensions of the machine ca.: 6560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 1,5 kW weight of the machine ca.: 0,385 t dimensions of the machine ca.: 930 x 730, x 1400mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: siehe TD total power requirement: 11 kW weight of the machine ca.: 4,570 t dimensions of the machine ca.: 3830 x 1160 x 1180mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: siehe TD total power requirement: 15 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 4260 x 1160 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralCNC Turning Centre; Control: Control M730UM with CELOS CharacteristicsMax machining diameter356 mmMax. Turning Length705 mmSpindle bore111 mmBar diameter max.80 mmSpeed max.4000 rpmNumber of tool stations12 Rotary tool spindle speed10000 rpmMovements X / Z260/795 mmRapid feed X / Z30/30 m/minDrive power main spindle18,5/15 kWDimensions (L x W x H)3,35 x 2,11 x 2,2 (3,99 x 2,11 x 2,2) mWeight approx.6360 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p (Spindle 1) Standard spindle 18.5/18.5/15 kW, 4,000min-1(Spindle 1) Standard Spindle 18.5/18.5/15 kW, 4,000 min-1 Max. spindle speed: 4,000 min-1 Chuck size: 10 inch., 12 inch. (8 inch. also for the 2-a ...

GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmC-Axis Speed2000 rpmSlide 1Longitudina ...

General- partial hollow clamping device (hydraulic), - C-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception HSK-A63, DIN 69893 - Y-axis ±210 mm - B-axis ±120º interpolating, Torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in X-, Y-, Z1-axis - cooling pump 6 bar;20 l/min, - USB-interface, Ethernet-interface; Control: CELOS X with Siemens 840D SL Operate Working areaSwing diameter over guide ways700 mmTurning diameter700 mmDistance between spindles3360 mmClamping chuck diameter max.630 mmBar diameter max.125 mmMain drive 1Drive power (100% DC)40 kWDrive power (40% DC)52 kWSpeed range- 2500 rpmTorque (100% DC)1700 NmMax. torque (40% DC)2200 NmC-Axis Speed2500 rpmTorque of C-Axis (holding torque)1700 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 698 ...

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 30mm (S) total power requirement: 37 kW weight of the machine ca.: 15,3 t dimensions of the machine ca.: 4510 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 16 total power requirement: 37 kW weight of the machine ca.: 23,81 t dimensions of the machine ca.: 6560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1000 x 700 x 1380mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: 40 x 40 x 5 mm U-iron on the x-axis: 80 x 45 x 5 mm roll diameter - bore: 40 mm roll diameter -toolpieces: 150 mm turning speeds: 10 U/min voltage: 400 V / 50 Hz total power requirement: 1,5 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 0,8 x 0,92 x 1,4 m • Machine has a standard set of rolls for profile: flat (upright) 60 x 10, flat 80 x 15, Square 35, square pipe 45 x 45 x 2, rectangular pipe 60 x 30 x 3, Further sets of rolls can be supplied optionally, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: 50 x 50 x 5 mm round steel bars: 30 mm U-iron on the x-axis: 60 x 40 x 6 mm roll diameter - bore: 40 mm roll diameter -toolpieces: 118 - 148 mm turning speeds: 9,3 U/min voltage: 400 V / 50 Hz total power requirement: 1,5 kW weight of the machine ca.: 0,425 t dimensions of the machine ca.: 1,5 x 0,8 x 0,8 m • Machine has got a standard roller set for profiles: flat upright 50 x 10, flat 50 x 15, upright 30, square tube 50 x 50 x 2,5, retangular tube 50 x 25 x 2,5. further roller sets optionally: for exampel: 1 set (6 rolls) for round pipe D = 3/8 + D = 3/4, Surcharge for each extra roller set: € 440,-/set Machine in unused condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fiber Laser Machines With working ranges from 3050 mm x 1545mm to 6050mm x 2550mm and TRUMPF TruFiber laser power from 3000W to 12000W For more details please visit Cutform Machines via this link www.cutform.co.uk

Pressbrake Bending Machines With Bending Lengths from 2050 mm to 4100 and Bending Force from 600KN to 3200KN For more details please visit CutForm Machines via this link www.cutform.co.uk

width of the strips: 150 mm band length: 2000 mm band speed: 30 m/min grinding range: 150 x 540 mm voltage: 400 V / 50 Hz total power requirement: 3 kW weight of the machine ca.: 110 Kg dimensions of the machine ca.: 1x0,5x1 m Art.-No.16680 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity in St 60: 40 mm threading in St 60: M 24 mm threading in GG 20: M 30 bore stroke: 120 mm Short spindle: MK 3 throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514 x 360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 117 / 701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160 - 2250 UpM total power requirement: 1,45 / 1,9 kW height of the machine: 1840 mm weight of the machine ca.: 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pu ...

Wilco WILCOMAT R HSA 02/R 20 VISION fully automatic system for test vials which combines two test methods in the following steps: 1. Headspace Analysis (HSA) to determine the oxygen content in the test specimen (1 test station), 2. VISION for the detection of manufacturing and cosmetic defects (3 cameras), main machine components: 1. Interface with the HMI control panel, 2. In-line feed conveyor, 3. Bypass system, 4. HSA test rotor with the HSA 1 single-head HSA test station, 5. ‘HSA Reject’ and ‘HSA Not Inspected’ trays, 6. Acceleration screw conveyor from HSA to VISION, 7. VISION test rotor with three VISION test stations: Cap 1, Flip-Off, Cap 2, 8. ‘VISION Grey/Uninspected’ tray with star wheels, 9. In-line outfeed conveyor followed by a tray loader, 10. Three (3) electrical control cabinets, 11. One (1) vacuum pump. The following trays are provided for: Tray-HAS Defective ...

x-travel: 800 mm y-travel: 500 mm z-travel: 460 mm table surface area: 1000 x 500 mm spindle taper: SK 40 control: HEIDENHAIN TNC 150 spindle turning speed range: 31,5 - 3150 U/min feeds longditudinal/cross/vertical: 1 - 3000 mm/min rapid traverse longitudinal and cross: 6 m/min rapid traverse vertical: 4 m/min quill stroke: 110 mm distance spindle nose and table: max. 559 mm table load capacity: max. 500 kg total power requirement: 14 kW weight of the machine ca.: 3,1 t dimensions of machine L x W x H: 2,15 x 1,8 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stations: 10 / 22 tool taper: SK 40 control: SIEMENS SIMATIC OP 3 total power requirement: ca. 112 kW = transfer machine Shift drum with 10 workpiece stations, 22 machining units (drilling 7 units, drilling and thread cutting 8 units, drilling and sinking 5 units, drilling, sinking and thread- cutting 2 unit), spindle taper SK 40 each, engine power of the individual units between 4.0 and 4.5 kW, SIEMENS control SIMATIC OP 3, assembly robot ABB Accessories.: chucks (without jaws), chip conveyor, coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stations: 10 / 22 tool taper: SK 40 control: SIEMENS SIMATIC OP 3 total power requirement: ca. 130 kW = transfer machine Shift drum with 10 workpiece stations, 22 machining units (drilling 10 units, drilling and thread cutting 5 units, drilling and sinking 3 units, drilling, sinking and thread- cutting 1 unit, thread cutting 3 units), spindle taper SK 40 each, engine power of the individual units between 4.5 and 5.5 kW, SIEMENS control SIMATIC OP 3, assembly robot ABB Accessories.: chucks (without jaws), chip conveyor, coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL SPECIFICATIONS Manufacturer: BACKERS Description: Star screening and mixing machine Version: wheeled / tracked Undercarriage: Semi-trailer and crawler undercarriage Type: 3-mtbl(c) Year of manufacture: 2018 Operating hours: approx. 4,000 h Screen deck: Star screening machine with separation cut at approx. 80mm Screening area: 4 sqm Throughput (sieving + mixing): 200 t/h Flow rate (screen): 250 cbm/h Binder bunker: 7 cbm Engine: Volvo Motor TAD 572 VE, 160 kW Drive type: Diesel-hydraulic Weight: 30,000 kg Transport dimensions: 13,660 2,550 4,000 (LWH in mm) SPECIFIC COMMENT - Fully functional and ready to drive - Automatic control with numerous settings - Belt scale - Dedusting system - Various spare and wear parts - Areas of application: Excavation/overburden processing, soil stabilization, Production of liquid soil, mixing HGT material