140,465 used machines on RESALE, but how to find them? Machine Search
This 3-axis Hexagon Global S 05.07.05 was manufactured in 2021, featuring a measuring range of X 500mm, Y 700mm, Z 500mm. It includes an indexable swivel head, HH-AS6-T5, and an HP-S-X1S touch probe with a standard styli set. Ideal for precise measurements in extended temperature ranges (16-26 °C). If you are looking to get high-quality measuring capabilities consider the Hexagon Global S 05.07.05 machine we have for sale. Contact us for more information.
Bous Waschfix Industrial cleaning and degreasing system The system is ideal for workshops, production plants, mechanical engineering or automotive companies for automatic and thorough cleaning and degreasing of workpieces, machine parts and tools. The device cleans highly efficiently using a hot water spray (up to +70 °C) with environmentally friendly, water-based cleaners (pH value 7–11). Thanks to the integrated two-hand safety control and the clear control panel, handling is absolutely safe and uncomplicated. • Integrated ultra-fine filter for a longer service life of the wash water and cleaner cleaning results. • Integrated drain pump for effortless pumping of the tank during maintenance. • Compressed air blow-out function for subsequent drying of the cleaned components. Technical data Manufacturer: BOUS Cleaning & Degreasing Systems Type / Model: ...
BN 102 C Producer Tos Swing 280 mm Distance between centres 630 mm Cross table adjustment 250 mm Longitudinal table adjustment 510 mm Vertical milling head adjustment 290 mm Machine weight 1000 kg
Bohrleistung in Stahl (-Ø: 45 mm throat: 1250 mm workpiece height max.: 1100 mm swival range +/-: 360 ° height adjustment: 745 mm base plate surface area: 1450 x 920 mm Bohrspindel-Ø/ Aufnahme: 90 mm / MK 5 bore spindle stroke: 355 mm max. torque on the spindle: 250 Nm feed power: 14000 N turning speed range: 20 - 1200 U/min feed range: 0,063 - 0,63 mm/U power capacity: 3,7 kW weight of the machine ca.: 3,0 t dimensions of the machine ca.: 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bohrleistung in Stahl (-Ø: 50 mm throat: 1500 mm workpiece height max.: 1380 mm Bohrleistung in Guß (-Ø: 60 mm Abstand Spindelmitte bis Säule: 320 - 1250 mm swival range +/-: 180 ° base plate surface area: 2640 x 1000 mm max. torque on the spindle: 310 Nm Bohrspindel-Ø/ Aufnahme: 75 mm /MK 5 bore spindle stroke: 310 mm spindle turning speed range: 28 - 2500 U/min feed:: 0,05 - 2 mm/U power capacity: 4 kW weight of the machine ca.: 4,3 t cube table 500 x 500 x 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bous Waschfix cleaning and degreasing system For sale is a professional, industrial parts cleaning system / washing system of the type "Waschfix". The system is ideal for workshops, production companies or metalworking companies for the thorough cleaning, degreasing and care of components and workpieces. The system is robustly built and has an external, high-quality pump and stainless steel filter unit for cleaning the washing medium as well as a clear control system. The device cleans highly efficiently using a hot water spray (up to +70 °C) with environmentally friendly, water-based cleaners (pH value 7–11). Thanks to the integrated two-hand safety control and the clear control panel, handling is absolutely safe and uncomplicated. Technical data Manufacturer: Bous Type: Waschfix Production number: 18251 / 2001 Capacity: 120 litres Permissible cleanin ...
FORMAT4 PROFIT H08 21.31P CNC router was built in 2021 in Austria by the FELDER GROUP. The machine is designed for the precision machining of materials such as mild steel, wood and plastics. The machining is performed on a vacuum table with a length of 3000 mm and a width of 2000 mm, using a high-speed spindle. To maintain high machining accuracy, tools taken from the 15-position magazine are continuously measured by a special sensor. The axes are driven by high-performance YASKAWA servo motors, which guarantee high feed dynamics even during intensive use. The FORMAT4 PROFIT H08 21.31P is operated using the intuitive TpaCAD CAD/CAM software, which facilitates project preparation and machining management. The machine is also equipped with, among others, two BECKER vacuum pumps and an automatic lubrication system. All this makes the FORMAT4 PROFIT H08 router an excellent choice for busi ...
Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø300 mm Table dimensions: 170 x 420 mm Grinding table inclination: 0° – 45° top + bottom Motor power: 0.75 kW Motor speed: 1,500 min-1 Clockwise and counterclockwise rotation Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø60 mm Weight: 27 kg Optional: - Angle stop - Cylindrical grinding device - mobile machine stand Price plus VAT, which will be shown separately on the invoice. Free and insured shipping throughout Germany! If you have any questions, please ...
Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø400 mm Table dimensions: 225 x 550 mm Grinding table inclination: 0° – 45° top + bottom Motor power: 1.5 kW Motor speed: 1,500 min-1 Clockwise and counterclockwise rotation Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø80 mm with angle and parallel fence Weight: 55 kg Optional: - Angle stop - Cylindrical grinding device - mobile machine stand Price plus VAT, which will be shown separately on the invoice. Free and insured shipping throughout Germany! If y ...
Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø600 mm Table dimensions: 320 x 830 mm Grinding wheel inclination: +/- 30° Motor power: 1.5 kW Speed: 940 min-1 Clockwise and counterclockwise rotation with visual display Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø100 mm Oyrkh with angle stop with engine brake Weight: 240 kg Optional: - digital angle display - Machine light - Table extension: 170 mm Price plus VAT, which will be shown separately on the invoice. If you have any questions, please do not h ...
Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø900 mm Table dimensions: 450 x 1,200 mm Table extension: 300 mm Grinding wheel inclination: +/- 30° Motor power: 4.0 kW Speed: 600 min-1 Clockwise and counterclockwise rotation with visual display Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø150 mm with angle stop with engine brake Weight: 460 kg Optional: - digital angle display - Machine light - Table extension: 170 mm Price plus VAT, which will be shown separately on the invoice. If you have any questi ...
First commissioning: 2016 Control: Heidenhain iTNC 530 incl. handwheel HR 520 X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 min-1 Torque: 95 Nm Tool holder: HSK 63A Tool tensioning: hydraulic Coolant supply: outside and inside Blowing air: Outdoor Drives Linear axes Feed speed X-, Y-, Z-axis: up to 60 m/min Axle acceleration X-, Y-, Z-axis: up to 5 m/s2 Connection data Connected load: 190 kVa Fuse: 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 9,000 x 5,650 mm Total weight: approx. 55,000 kg Colour Housing, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green ...
Register punch EUROTRON IND-XR 500, year of construction 2004, serial number S1-2004-1, with adjustable X-axis and Y-axis see result Photo of test, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome, by prior appointment, to visit the machine in our house.
Very robust and compact 1-fold eyelet machine, electric table unit in top condition. Designed for 5.5 mm eyelets. Stock goods, immediately available.
Horizontal turning machine manufactured in 2022. This Okuma GENOS L2000-e features a maximum turning diameter of 220 mm and a turning length of 500 mm. It is equipped with a spindle power of 15 kW and a spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L2000-e machine we have for sale. Contact us for further details.
Punching force 80 tons punching capacity Ø 25 x 23mm Diameter x thickness Ø 50 x 12mm Projection 310mm stroke length 100mm Stroke rate at 20mm 28 / minute Table size 700 x 500mm Working height 1050mm Motor power 5.6kW Model weight 1960kg Dimensions LxWxH 1280x865x1980mm
Housing/partition wall for Polar cutting machines or stackers; width 228cm; Height 180cm. Housing/dividing wall for cutting machines or lifters Polar; width 228cm; hight 180cm.
Tube cutting machine manufactured in 2011. This TRUMPF TruLaser Tube 7000 features a laser power of 3600W and an impressive X-axis travel of 6500 mm. It is equipped with a circular diameter of 200 mm, ensuring efficient cutting capabilities. If you are looking to get high-quality tube cutting capabilities, consider the TRUMPF TruLaser Tube 7000 machine we have for sale. Contact us for further details.
Catalog No. 6765 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm number of spindles 4: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm - electrically adjustable right/left from the control panel 5.5kW 4) horizontal top 230mm - electrically adjustable up/down from the control panel 7.5kW - all spindles adjustable up / down, right left - spindle diameter 40mm in advance: - introductory pulling rollers, toothed 6 pcs, including 2 double - pulling out rollers, rubber 2 pcs from down: - introductory toothed, metal, torsion roller in the bottom plate + - smooth metal pulling roller - pneumatically adjustable rollers - length of the introductory tabletop (with pneumatic feeder) 3390mm - the ability to work without switching on the pneumatic feeder, - adjustable top / bottom - central lubrication - ...
This 3-axis Bodor P3-G3 fiber laser cutting machine was manufactured in 2024. It features a powerful 12,000W laser, providing efficient cutting capabilities for various materials. If you are looking to get high-quality cutting capabilities, consider the Bodor P3-G3 machine we have for sale. Contact us for further details.
Weibert ADM 320 Dressing thickness planer Planer width 320mm 3 knife shaft Motor 3kW 400V Dressing table 1500 x 320 mm chip removal 5mm Speed 5000 rpm Thickness table 700 x 316mm Passage height 230mm Feed 7m/min Weight 260kg WJ-ADM-320
Compressed air station manufactured in 2018. This Ingersoll Rand D480EC-A is part of a complete turnkey industrial system, featuring a primary rotary screw compressor, air treatment dryers, and buffer tanks. It includes a 2,000-litre pressure vessel and multiple refrigeration air dryers. If you are looking to get high-quality compressed air capabilities, consider the Ingersoll Rand D480EC-A machine we have for sale. Contact us for further details.
This 4-axis TOS WH 10 CNC boring machine was manufactured in 1996. It features a longitudinal travel of 1250 mm, transverse feed of 1000 mm, and vertical travel of 1100 mm. The machine has a robust table size of 1000 x 1100 mm and a maximum table load capacity of 3000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WH 10 CNC machine we have for sale. Contact us for further details.
offer 22391 Specifications: - Cutting length up to 200 mm - Cutting thickness - steel with 400N/mm² strength 6 mm - Stainless steel with 600 N/mm² strength 4 mm - infinitely variable cutting angle adjustment 30 - 120 ° - pneumatically clamped - automatic cutting gap adjustment - Locking stops left + right each 300 mm - Table support surface 1000 x 800 mm - with T-slots and depth stops - Table height approx. 900 mm - Depth stops - Drive 400 V / 4 kW - E – Foot switch - Space requirement approx. W 1000 x H 1350 x D 1510 mm - Weight approx. 1800 kg
CNC centerless grinding machine Monzesi mod Monza 510 CNC 6 axes complete with piece loading and unloading system CNC Fanuc 160i-T Under power in our warehouse in Gussago BS. Mimu machine tools Italy
x-travel: 6300 mm y-travel: 1200 mm z-travel: 2000 mm Control: total power requirement: kW weight of the machine ca.: 57 t dimensions of the machine ca.: 7000x1300x5000 mm Brand: Anayak Type: HVM7000 CNC brand: Heidenhain Year of make: 1997 Table length: 7.040 mm Table width: 1.000 mm X: 6.300 mm Y: 1.200 mm Z: 2.000 mm max. 3000 Rpm Machine dimensions (lxwxh): 7000 x 1300 x 5000 mm Machine weight: 57.000 kg including 6 angleplates 2500 x 700 mm this machine is in perfekt working order and can be inspected under power The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A 5-axis CNC milling machine Geiss with full encapsulation is available. Travel X/Y/Z: 2500mm/2200mm/760mm, tool holder: ER25, spindle power: 11kW, milling head type: orthogonal milling head, control: Siemens Sinumerik 840 Di solution line. Documentation available. On-site inspection is possible.
Travel X/Y/Z: 700mm/500mm/450mm, table dimensions X/Y: 900mm/500mm, max. table load: 500kg, spindle mount: SK40, speed: 3150rpm, quill stroke: 100mm, feed: 3m/min, rapid traverse: 6m/min, machine dimensions X/Y/Z: approx. 3550mm/3150mm/2100mm, weight: approx. 3600kg. On-site inspection is possible.
A centerless cylindrical grinding machine König & Bauer (Koebau) is available. Grinding wheel width: 300mm, max. grinding diameter: 200mm, grinding wheel bore: 305mm. Control wheel width: 300mm, control wheel bore: 127mm, speed: 85rpm, max. workpiece length (plunge grinding): 300mm. Machine dimensions X/Y/Z: approx. 3150mm/2100mm/1850mm, weight: approx. 6000kg. On-site inspection is possible.
A laser cutting and punching machine Trumpf with an unknown defect (linear amplifier in order) is available. Press force: 220kN, laser power: 1500W (1.5kW), max. punching diameter: 76mm, max. workpiece dimensions X/Y: 2585mm/1280mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 200kg, part dispenser X/Y: 500mm/500mm, magazine positions: 18, machine dimensions X/Y/Z: approx. 8000mm/7500mm/2400mm, weight: approx. 16000kg. On-site inspection is possible.
CENTRO DI LAVORO KIA V25- ANNO 2005, CNC FANUC 0i-MB PALLET:2 UTENSILI SORAGE: 16 STAZIONI MANDRINO BT30 Giri/min: 10000 TABELLA:500X300X500 FULL DI MANUALI E ATTREZZATURE. MACCHINA MOLTO VELOCE e veloce da equipaggiare. COLLEGATA ALL'ALIMENTAZIONE IN PRODUZIONE.
Laser Prima Industrie CP 4000 3000x1500 4000W Anno 2006 Ore lavoro circa 30 mila No carico/scarico Piano doppio Revisionato Visibile in funzione
A deburring system (deburring cell) is available for post-processing metal workpieces using a plastering robot. Documentation available. On-site inspection is possible.
Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, effective length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions X/Y/Z: approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.
A CMS CNC woodworking center is available. Axes: 5, travel X/Y/Z: 3500mm/2200mm/300mm, spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, tool places: 20, table type: matrix vacuum table, control: Osai S10. The system control was modernized in 2006. Documentation available. On-site inspection is possible.
ORT 3RP48 CN CNC / PLC thread rolling machine scaffolding sleeves threading, shelves studs threading electronic overhaul/retrofit Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools
KORRADI UW 10 with Heidenhain equipment, details see pictures, immediately available
A total of three counting and distribution machines are available for filling containers (pouches) to the exact number of pieces. 1) MTF Technik MR-S1, year of manufacture: 2017. 2-3) Two identical Lauper LQ 100, year of manufacture: 2007, control: IT 9000. Documentation available. On-site inspection is possible.
A Hildebrandt foam padding machine for padding fragile goods is available. Production capacity: 21 bags/min, padding combinations: 156, foam expansion: 280x, bag size range: 200mm-760mm, foam quantity range: 0%-55%, height adjustment: 600mm, machine dimensions X/Y/Z: approx. 1350mm/1000mm/2000mm-2600mm. Documentation available. On-site inspection is possible.
Diosna spiral kneader SPV 160 AD with 2 extendable boilers For a maximum of 160 kg of dough per bowl Kneading tool made of stainless steel Including two stainless steel shells Timer with two clocks Two speeds Friction wheel drive Condition: obsolete; checked and cleaned
Universal milling machine Deckel FP1 Machine Operating voltage: 380/400 volts without feed in y direction, with angle table, work surface with 4 T-slots Condition see pictures Errors excepted!
A Sahm parallel winder is available. Spindle positions/winding positions: 104, traverse length: approx. 300mm, bobbin core holder: approx. 50mm. On-site inspection is possible.
It is a used, reconditioned Fortuna bun press semi-automatic size 3 (30 pieces) for sale. The bun press is in top condition, fully functional and runs very quietly. A new knife rack was installed. The engine was re-mounted and a new main switch was installed. The machine was repainted. The weight range of the machine is 32gr. - 70gr. per piece of dough (30 pieces). If dough pieces are only pressed and cut, a higher weight range is possible. Incl. 3 x plates (further plates on request). Price on request.
Travel distances: 320 x 250 x 220 mm [ X x Y x Z ] workpiece size X: 780 mm workpiece size Y: 570 mm workpiece size Z: 200 mm workpiece weight: 350 kg with automatic wire threading U/V axis: 80 mm x 80 mm Cutting in a water bath Conicity: +/- 15° at 120mm
Milling machine MACMOM M 100, year of construction 1970. Without table. At call.
maximum number of results exceeded
please refine your search
15 € 
