labelling machine used for sale

Key data: 630 mm, 8

Max. outer diameter (gear): 630 mm Max. inner diameter (gear): approx. 750 mm Max. tooth width: 180–200 mm Max. module: 8 Shock stroke: up to 220 mm Stroke rate: 47–300 strokes/min Tool holder: MK 4 Drive power: approx. 8 kW Total connected load: approx. 10–12 kW Njbmsww Er Hompw Spjwk Machine weight: approx. 5,500–5,800

Stock number: DT083, In stock: Yes, Amount in stock: 1 pc., Item: Tablet compressing machine, Theoretical capacity: 260 - 520 pcs/min, Stations: 16 pcs., Variable speed: Yes, Tablet size: Max 25 mm, Dimensions: L 950 x W 950 x H 1850 mm, Documentation: Yes

Height=0.55 m, Overall length= 0.3 m, Overall width= 0.58 m, Net weight= 39 kg,

Height=0.5 m, Overall length= 0.3 m, Overall width= 0.55 m, Net weight= 38 kg,

Travel: X= 600, Y= 400, Z= 420 mm Speed range: 20 – 4000 rpm Gear Stages: 3 Mount: SK 40 Quill stroke: 75 mm Spindle motor: 5.9 kW Feed range: 1 – 5000/6000 mm/min (man./program.) Rapid traverse x, y: 7 m/min Rapid traverse z: 6 m/min Clamping area: 900 x 458 mm Weight: approx. 2300 kg Various tools (without cabinet)

Key data: 50 mm, 335 mm, 280 mm

Power: 7.8 kW Weight: 1,650 kg Table size: 630 x 500 Speed: 45 - 1,000 rpm Machine is ready for operation and can be dispensed immediately.

Key data: 220 kN, 22 mm

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and addi ...

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 55A injection moulding machine, fitted with the Procan CT Controller. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on reques ...

X-axis: 320mm, Y-axis: 400mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.

X-axis: 500mm, Y-axis: 230mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.

X-axis: 320mm, Y-axis: 400mm, Z-axis: 40mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.

Size: 500 mm Equipments: 2 parallel fold 1 cross fold Sheet width: max: 500mm,min: 105mm, Cross folding: max: 500mm, min: 182mm, Perforation: max: 500mm, min: 105mm, sheet length: max. 648mm, min.174mm. Speed max. 180 m/min., suction head w ith a rotary feeder

Size: 540 x 760 mm Equipments: 4-buckles cross folder Parallel fold Crossfold Technology: touch & work Memory folding types: 17 standard-typs of fold preprogrammed - Saveable jobs: 200 memories for repeat orders 1.folding unit: 4 buckles + knife 2.folding unit: 2 buckles Knife: full automatic Sheet size:max. 540x760mm; min. 120x172mm - Fold length:1. buckle: min. 58mm all other buckles: min. 35mm Paper weight: 40-250g/sqm Pile height: 650mm Speed: max. 40.000 cycles/h Power: 400V/50Hz - 2,5kW Dimensions: 2.700x1.050x1.650mm Weight: 1.050kg (without conveyor)

Number of boring spindles: 4 St. Working width: 220 mm Working height: 120 mm Length of the planing table: mm Feed motor: 2,2 kW Feed speed: 5 - 22 , Stufenlos m/min. total power requirement: 17 kw Dimensions (L/W/H): 3.310 x 1.740 x 1.700 mm weight of the machine ca.: kg spindle diameter: 40 mm turning speeds: 6.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1000 mm gear width: 630 mm max. module: 16 min. module: 1 wheel diameter with counterstay: 800 mm max. number of teeth: 999 clamping length: 1060 mm workpiece weight: 1500 kg max.helical angle: 45 ° grinding spindle drive: ca. 20 kW Control: Opal / Siemens total power requirement: 70 kW weight of the machine ca.: 17,5 t - CNC control Opal / Indramat with Siemens S5 PLC - paperbandfilter - oil mist exhauster - complete covering The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=1.87 m, Overall length= 1.16 m, Overall width= 0.64 m, Net weight= 115 kg,

1 used: Internal cylindrical grinding machine • Manufacturer: OVERBECK, Herborn • Model: 250 I-HA • Factory No.: 261991 • Year of construction: 1971 • Clamping diameter: max. 140 mm • Grindable bore length: max. approx. 150 mm • Grindable bore diameter: max. approx. 0.8-80 mm Accessories: without internal grinding spindle without drive motor for internal grinding spindles Deflection pulleys for spindle drive available (Machine was installed by the previous owner with a pneumatic spindle operated) Flat grinding device, can be swivelled in by hand Coolant tank with pump

Specifications: - Machine for the production of longitudinal folds on the edges - square or rectangular longer channels and - Number of roller shafts with folding rollers 15 pcs - Material thicknesses from 0.5 - 0.63 mm - Duct dimensions from 80 x 80 mm - up to 100 x 100 mm - from duct dimensions 100 x 100 mm - Material thicknesses 0.5 to 1.0 mm - Throughput speed 15 m/min - Pneumatic connection - Drive 400 V / 3 kW -with: - E. - Footswitch - Duct baffles - Separate lubrication device - Space requirement approx. W 5400 x H 1200 x D 800 mm - Weight approx. 950 kg

Used Revised Sipa Rotary Blow Molding Machine 2008: A Comprehensive Overview Are you in the market for a reliable blow molding machine? Look no further than the used Sipa Rotary Blow Molding Machine 2008. In this article, we will delve into the details of this machine, exploring its features, specifications, and benefits. Whether you are a seasoned professional or just starting in the industry, this article will provide you with valuable insights into the Sipa SFR8. 1. Introduction Blow molding machines play a crucial role in the production of various plastic containers. The Sipa Rotary Blow Molding Machine 2008, also known as the SFR8, is a popular choice in the industry. It offers efficiency, precision, and versatility, making it an excellent investment for manufacturers. Let's explore its features in detail. 2. Overview of the Sipa Rotary Blow Molding Machine 2008 The Sipa Ro ...

Heidelberg Stahlfolder Ti 52/6/4 K with gluing year 2008 Feeder 1 unit 6 buckles 2 unit 4 buckles 1 knife Gluing Device good condition

x-travel 300 mm y-travel 160 mm z-travel 360 mm Total power requirement 1 kW Machine weight approx. 0.8 t Various engraving sets

X-axis: 3050mm, Y-axis: 2050mm, Z-axis: 120mm, wavelength: 9.3-11.5µm, laser power: 300W, laser class: 1, operating pressure: 2bar, control: Beckhoff TwinCAT, length: 5050mm, width: 2950mm, weight: 3.8t, with CO2 laser Rofin Sinar SCX 30 HP 16.6, year of manufacture: 2022. An on-site inspection is possible.

Various sewing machines are available. 1) Bartacking machine Dürkopp 570. 2) Bartacking machine Dürkopp 570. 3) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 4) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 5) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 6) Sewing machine Pfaff 463-6/27. 7) Sewing machine Dürkopp Adler 271-14004. 8) Sewing machine Pfaff 481/900/99, needle: 1. 9) Sewing machine Pfaff 1181 Racing Puller. 10) Sewing machine Dürkopp Adler 272. An on-site inspection is possible.

This is a side seam wicket bag machine Lemo Intermat 850 STN-CP Knoter, production type: wicket bags for bread, chicken, diapers, toilet paper, hygiene products and other types of wicket bags, number of lanes: single lane / lane wicket, processable materials: LDPE, HDPE, PP and recycled extracts, sealing width (bag length): 120-450mm, draw length (bag width): 200-850mm, gripper arm length: 600mm, max. linear speed: 65m/min, output capacity: 140 knot bags/min, max. number of bags per stack: 250, drive system: PLC-controlled, operator interface (terminal), print mark control, servo motor drive, nip feed rollers, sealing bars. Attachments and accessories: bottom gusset (only bottom gusset included), handle unit, longitudinal sealer, pre-sealer, angle sealer, cross sealer, handle punch, photo cell for printed film, automatic one-step conveyor (index conveyor), handle hole punch, G-gusset uni ...

bore capacity in steel (diameter): mm throat: 290 mm bore stroke: 180 mm total power requirement: 1,9 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40.0 t stroke: 285 mm flat steel: 250 x 24 mm working feed: 10.0 mm/sec return speed: 10.0 mm/min work height max.: 930 mm table:: 660 x 1250 mm total power requirement: 4.0 kW motor: 400 Volt 50 Hz oil volume: 40.0 l weight: 800 kg range L-W-H: 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20.0 t stroke: 185 mm flat steel: 200 x 12 mm working feed: 10.0 mm/sec return speed: 10.0 mm/min work height max.: 930 mm table:: 480 x 1060 mm total power requirement: 2.2 kW motor: 400 Volt 50 Hz oil volume: 12.0 ltr. weight: 530 kg range L-W-H: 1150 x 480 x 1400 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting range for steel to: 35.0 TS mm cutting range for steel to: 25.0 QS mm ampere: 20 - 65 Ampere cutting medium: Druckluft voltage: 400 V output: Eingang 7.8 KW weight: 51.5 kg range L-W-H: 595 x 250 x 890 mm Avalon 65 AIR with integrated compressor Cutting - clean and reliable The air plasma cutting system Avalon 65 AIR with integrated Compressor is your reliable partner for the demanding Mission. Make separation cuts up to one with the Avalon 65 Air Material thickness of 18 mm. Characteristics : - IGBT technology - with integrated compressor - Microprocessor control system for excellent and dynamic . Arc properties - CNC interface - HF-free arc starting system for increased reliability . and low EMF exposure - Manual switch to activate airflow around test air pressure . without having to trigger the burner - Intelligent protection function protects the plasma torch . from damage su ...

x-travel: 1000 mm y-travel: 360 mm z-travel: 400 mm spindle taper ISO: 40 ISO table:: 1370 x 300 mm feed:: 30-830 / 23-625 mm/min. turning speeds: 45 - 1660 U/min distance spindle /table: 60 - 460 mm rapid traverse: Z Achse 750 mm/min throat: 95 - 575 mm total power requirement: 3.0 kW weight of the machine ca.: 1505 kg range L-W-H: 1740 x 1860 x 1900 mm - Large rectangular guide in y and z axes - ensure increased stability - 8x automatic feeds and rapid traverse in all axes - driven by servo motor - Universal milling head system Huron, adjustable to all angular positions - Swiveling control panel with ergonomically placed switches - Heavy machine stand made of gray cast iron for vibration-free work - Very smooth running thanks to ground gears running in an oil bath - Upper arm with clearly structured gear box for the spindle speed - Digital position display for x, y and z axes included  ...

x-travel: 600 mm y-travel: 250 mm z-travel: 400 mm spindle taper ISO: 40 ISO table:: 1120 x 260 mm feed:: 24 - 402 mm/min. turning speeds: 45.0 - 1660 U/min distance spindle /table: 175 - 520 mm rapid traverse: Z Achse 660 mm/min throat: 0 - 550 mm total power requirement: 2.2 kW weight of the machine ca.: 1380 kg range L-W-H: 1570 x 1470 x 1660 mm Equipment: - Universal milling head, adjustable to all angle positions - Swiveling control panel with ergonomically positioned switches - Heavy machine stand made of gray cast iron for vibration-free work - Dovetail guide with adjustable wedge strips in all 3 axes - Very smooth running thanks to ground gear wheels running in an oil bath - Positioning motor for z-axis included in delivery - Automatic table feed in x and y axes as standard - Precisely surface-machined cross table with T-slots - Digital position display for x, y and z axes includ ...

bore capacity in steel (diameter): 60,0 mm arm length: 350 - 1.600 mm workpiece height max.: 665 x 1.250 mm turning speeds: 38 - 2.000 U/min spindle taper MT: 5 MK base plate: 960 x 1.760 mm threading: 42 M quill stroke: 325 mm total power requirement: 4,0 kW weight of the machine ca.: 3.800 kg. range L-W-H: 2.600 x 1.100 x 2.770 mm scope of delivery : - Cube table - Drill chuck arbor MK 5 / B 16 - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - Frequency converter - Digital speed display - lift motor - hydraulic motor - Height-adjustable protective cover - operating tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6,5 mm ST 40 : 3,5 mm VA : 90° Grad blade length: 250 x 250 mm table:: 810 x 750 mm work height max.: 950 mm engine output: 4,0 weight: 630 kg range L-W-H: 810 x 750 x 1150 mm Characteristics : - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - 1 set of cutting knives - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6.0 mm ST 40 : 3.0 mm VA : 30 - 140 Grad blade length: 200 x 200 mm table:: 900 x 990 mm work height max.: 940 mm Punching capacity: 35.0 in 6.0 mm ST 40 Throat / punching unit: 135 mm engine output: 4.0 kW weight: 1020 kg range L-W-H: 900 x 990 x 1200 mm Characteristics : - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - hydraulic Notching machine with adjustable angle & punching station - 1 set of cutting knives - Round punch with die 12 mm - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop The data for this ad  ...

: 3.0 mm ST 40 : 2.0 mm VA : 90.0 Grad blade length: 130 x 130 mm table:: 640 x 460 mm work height max.: 900 mm engine output: pneumatisch weight: 200 kg range L-W-H: 600 x 670 x 1270 mm Properties: - Notching with burr-free cut, without deformation of the cutting edges - Machine body made of high-quality gray cast iron, base made of sheet steel - Cutting blades made of surface-hardened tool steel - Effortless work thanks to pneumatic drive - Operation using a foot pedal, so both hands are free for the workpiece - Large work table with integrated scales - T-slots for precise guidance of the pivoting stops - Protective cover in front of the cutting blade for high safety Scope of delivery - 1x set of cutting blades - 2x pivoting material stops - Plexiglas protective cover - Foot pedal - Base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1.20 mm ST Shaft length: 140 mm roll diameter: 62.0 mm throat: 100 mm roll speed: 16.0 + 32.0 U/min engine output: 0.75 kW weight: 135 kg range L-W-H: 900 x 450 x 1350 mm Display machine - like new Never been used () Special price upon request Features: - 8 pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2 bending speeds - Powerful drive motor, even under continuous load - 1 mobile foot switch for forward and reverse rotation - Machine base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2.5 mm ST shaft length: 250 mm roll diameter: 96.0 mm throat: 160 mm roll speed: 6.0 + 13.0 U/min. total power requirement: 1.5 kW weight: 350 kg range L-W-H: 1400 x 550 x 1120 mm Display machine - like new Never been used () Special price upon request Features: - 4x pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2x bending speeds - Powerful drive motor, even under continuous load - 1x mobile foot switch for forward and reverse rotation - Machine base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1.20 mm ST shaft length: 140 mm roll diameter: 62.0 mm throat: 100 mm total power requirement: manuell kW weight of the machine ca.: 50.0 kg dimensions of the machine ca.: 560 x 220 x 500 mm Display machine - like new Never been used () Special price upon request Description: - 8 pairs of beading and flanging rollers included - For the economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Lower shaft with adjustable stop - Sturdy cast iron construction with a modern design - Expanded application range thanks to 8 different, optionally available roller pairs - Adjustable upper shaft The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1.20 mm throat: 270 (140) mm distance between roll centers: 60.0 mm total power requirement: manuell kW weight of the machine ca.: 46.0 kg dimensions of the machine ca.: 600 x 250 x 500 mm Furnishing: - various replacement rollers - hand crank - front stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

through-put width: 580 mm working heigth: 615 mm discs: 570 x 260 mm Air consumption: 400 l/min. air pressure: 2,7 - 5,5 bar 0: 184 Liter 0: Luft .. 3/8 Zoll weight: 125 kg range L-W-H: ca. 1350 x 1300 x 1800 mm Furnishing: - Working space: 1220 x 615 x 580 mm (LxWxH) - including sandblasting gun (grain size 0.149 - 0.250 mm can be used) - Including container for blasting material - including dust extraction - freely movable foot switch - Lighting in the work area - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

through-put width: 820 mm working heigth: 810 mm Air consumption: 680 l/min. air pressure: 8,6 bar : 148 Liter 0: Arm Loch 180 mm air clutch: 3/8 Zoll weight: 160 kg range L-W-H: ca. 1350 x 1300 x 1800 mm Furnishing: - Working space: 1110 x 820 x 810 mm (LxWxH) - very stable construction - including sandblasting gun (usable grain size 0.149 - 0.250 mm) - including container for blasting material - including dust extraction - freely movable foot switch - Lighting in the work area - Transport dimensions / packed: 1350 x 1000 x 1100 mm - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 5.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 2.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 50 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 2.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 20 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boring power: 32.0 mm bore capacity in cast iron: 35.0 mm morse taper: MK 3 spindle stroke: 120 mm throat: 260 mm column diameter: 110 mm table:: 515 x 355 mm turning speeds: 80 - 1400 U/min total power requirement: 0.7 / 1.3 kW weight: 175 kg range L-W-H: 750 x 520 x 1820 mm from a training workshop maintained condition () Furnishing: - V-belt operated column drilling machine - adjustable drilling depth stop - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 3x T-slots - Table height adjustment via hand crank - Front main switch - Connection cable including 16A plug Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9103754 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boring power: 23.0 / 28.0 mm Boring depth max.: 140 mm Center of spindle to wall or column: 300 mm Column diameter: 125 mm Size of table plate: 415 x 385 mm Speed: 100 - 2000 U/min. spindle taper MT: 2 MK voltage: 380 V Motor output: 0.9 / 1.4 KW weight of the machine ca.: 225 kg Dimensions (L/W/H): 900 x 600 x 1960 mm maintained condition () Furnishing: - V-belt operated column drilling machine - Right/left running of the work spindle - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 2x T-slots - Table height adjustment via hand crank - machined base plate with 3x T-slots - manual V-belt tension (front handwheel) - Connection cable including 16A plug Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9103760 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 8,0 mm ST pre-bending: 6,0 mm ST diameter of upper rolls: 230 mm side roll diameter: 210 mm diameter of lower rolls: 190 mm total power requirement: 7,5 kW weight of the machine ca.: 6.020 kg. dimensions of the machine ca.: 5142 x 1390 x 1300 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with ModulMW ...

diameter of brush: Ø 250 mm width of brush: 40.0 mm turning speed range: 2850 U/min voltage: 400 Volt total power requirement: 1.3 / 1.8 kW weight of the machine ca.: 36.0 kg dimensions of the machine ca.: 415 x 467 x 356 mm Equipment: - Deburring of individual pieces and small series - Deburring of stretched round, rectangular and square tubes + flat material - Heavy, durable industrial design - with maintenance-free motor - long service life and very smooth running thanks to balanced rotor - with quality ball bearings - storage area for safety glasses - incl. 1x multi-purpose wire brush, wire thickness 0.35 mm - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 14.5 + 29.0 m/sek grinding width: 460 x 150 Plantisch mm Dust suction hood: 100 mm total power requirement: 3.0 kW 100% ED weight of the machine ca.: 90.0 kg range L-W-H: 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 150 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operators body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is jus ...

width of the strips: 150 mm band length: 2000 mm band speed: 29.0 m/sek grinding width: 460 x 150 Plantisch mm Dust suction hood: 100 mm total power requirement: 4.0 kW 100% ED weight of the machine ca.: 84.0 kg range L-W-H: 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding ...

sheet width: 1600 mm plate thickness: 15,0 mm ST pre-bending: 13,0 mm ST diameter of upper rolls: 230 mm side roll diameter: 210 mm diameter of lower rolls: 190 mm total power requirement: 7,5 kW weight of the machine ca.: 4225 kg. dimensions of the machine ca.: 4000 x 1300 x 1440 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with ModulM ...