labelling machine for used for sale

Tilting container ENITOR type K500 Used tipping container made of galvanized steel, suitable for chips, scrap and other bulk materials. Type: K500 Load capacity: 800 kg Content: 500 l Year of construction: 2017 Weight: 150 kg The container is rollable (4 wheels), has a tilting device and is fully functional. Optical traces of use due to previous industrial use present. Dimensions: approx. 110 × 110 × 104 cm (L×W×H). Auction-ID: A7-46417-2

Industrial control terminals with closed housing for fixed wall mounting. Suitable as an HMI display, machine control panel or visualization terminal in production and workshop environments. Front with glass cover, robust industrial housing. Technical data (resolution, interfaces, touch function) not known. Auction-ID: A7-46417-201

Forklift forks 2840x160x65mm; outer dimensions tube 160x65mm; unused; 10FT; 7408 Auction-ID: A1-45902-223

2x battery 20V; 9 piece drill set; screw-drill machine; angle grinder; impact wrench; nut beater; with inlay; 4 grinding wheels; in original packaging; 5596 Auction-ID: A1-45902-315

diesel power generator Brand: Ford power: 8,125 kVA Engine: 498 cc diesel engine Starting: Electric starter motor Sockets: 1 x 400 volts (CEE 3P+N+E) 1 x 230 volt (CEE 2P+E) 1 x 230 volts (CEE 7/3 – Schuko) Protection: circuit breaker and emergency stop Housing: Soundproofing housing Display: LED Display Keys: 2 keys Weight: 165 kg Degree of protection: IP44 Condition: unused, in the original packaging Auction-ID: A3-43519-523

2x battery 20V; 9 piece drill set; screw-drill machine; angle grinder; impact wrench; nut beater; with inlay; 4 grinding wheels; in original packaging; 5596 Auction-ID: A1-45902-317

Condition: Used – fully operational, excellent overall condition Power: 120 kW Engine: Diesel, 1,968 cm³ Drive: 2WD Seats: 2 Max. permissible weight: 3,500 kg Max. speed: 150 km/h Mileage: Approx. 298,400 km Registration: Full documentation available (currently registered in Croatia) Note: Engine warning light is on Auction-ID: A7-46408-7

Forklift forks 2840x160x65mm; outer dimensions tube 160x65mm; unused; 10FT; 7408 Auction-ID: A1-45902-226

Internal number 837 Auction-ID: A1-46329-13

Tilting container ENITOR type K500 Used tipping container made of galvanized steel, suitable for chips, scrap and other bulk materials. Type: K500 Load capacity: 800 kg Content: 500 l Year of construction: 2017 Weight: 150 kg The container is rollable (4 wheels), has a tilting device and is fully functional. Optical traces of use due to previous industrial use present. Dimensions: approx. 110 × 110 × 104 cm (L×W×H). Auction-ID: A7-46417-5

3400PSI; rated flow 2.6GPM; 212cc; 2.6GPM; 7548 Auction-ID: A1-45902-405

LOT 9 Type: Forklift truck Brand: Linde Model: H80D Serial number: E1X353K00231 Year: 1999 Fuel type: Diesel Operating hours: 7720 h Own weight: 12610 kg Lifting capacity: 8000 kg Mast type: Duplex Tire type: Solid rubber Dimensions: Fork length: 1400 mm; Fork width: 1900 mm; Lifting height: 5700 mm; Overall length: 3400 mm; Overall height: 3900 mm Additional information: Diesel: yes. Auction-ID: A7-46289-9

General data: Engine: 1.8 TDCi Mileage: 284000 km Condition: Non-running (engine does not start) Auction-ID: A7-40553-29

2x battery 20V; 9 piece drill set; screw-drill machine; angle grinder; impact wrench; nut beater; with inlay; 4 grinding wheels; in original packaging; 5596 Auction-ID: A1-45902-314

3400PSI; rated flow 2.6GPM; 212cc; 2.6GPM; 7548 Auction-ID: A1-45902-404

Internal number 823 Auction-ID: A1-46329-14

2x battery 20V; 9 piece drill set; screw-drill machine; angle grinder; impact wrench; nut beater; with inlay; 4 grinding wheels; in original packaging; 5596 Auction-ID: A1-45902-316

Type: Forging Pliers / Hardening Tools / Thermal Protection Name: Hardening Shop Lot Forging Pliers, Thermal Protection & Melting Shells – 25 Pieces Description: Lot from the dismantling of an industrial hardening shop. Included are forging pliers of different designs and lengths for gripping and moving hot workpieces, as well as heat-protective clothing for work on heat treatment plants, and refractory melting or casting shells. The components are intended for use in forging, hardening and heat treatment plants. Sale exclusively as a complete lot. Condition: • Used Scope of delivery: • Forging pliers, various designs and lengths• Thermal protection (heat protective clothing / apron / coat) • Melting or casting shells (fireproof) • Total scope: 25 parts• Delivery as shown • Sale as complete lot • Material pliers: steel • Pliers types: forging pliers / gripping p ...

nominal force:2500 t stroke:600 mm cycle time:13 - 18 s distance between columns:1720 mm Distance table/ram, max. stroke up, adjustment up:2600 mm table surface area:1720 x 1800 mm allowed max. force:4000 t blow die to die:5000 t ram surface:2100 x 1320 mm capacity of ejector in table:40 t ejector stroke in table:250 mm ejector surface area in table:900 x 820 mm capacity of ejector in ram:6 t ejector stroke in ram:40 mm spindle diameter:425 mm power requirement:900,0 kW weight:335,0 t Dimensions (WxDxH):3,4 x 4,6 x 9,7 m height over floor:8,3 m fully-automated forging line:to produce axle shaft

impact energy:207951 mkg ram hammer stroke:660 mm no. of strokes:100 /min impact energy:2040 kJ distance lower die block / ram gudeway:660 mm Throat:750 mm steel forging - rectangular up to:240 mm steel forging - diameter up to:270 mm power requirement:75,0 kW weight of hammer:16,5 t weight of anvil:15,5 t ram hammer weight:750 kg weight:32,0 t dimensions (WxDxH):3,2 x 1,45 x 3,45 m Mode of operation:pneumatisch

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

TIG welding machine, electric welding machine DALEX type TGKW 55 (AC-DC)Series No. 532521 year of construction approx. 1975Power 225 Amp. = 60 % ED 125 Amp. = 100 % EDEsetting range 2.8 to 225 ampereCurrent type direct current and alternating current (AC-DC)Mains connection 380 volts, 50 Hz- Power setting via 5 coarse steps and fine adjustment via rotary potentiometer infinitely variable- 2-stroke and 4-stroke welding device- Remote controller with rotary potentiometer for fine adjustment- Digital display for ampere- TIG hose package 4 meters- Welding gas pressure reducing valve-

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table

Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Pot discs - diameter:175 mm spindle extension:180 mm operating voltage:400 V Machine weight approx.:300 kg room requirements approx.:0.90 x 0.60 x 1.80 m

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

Carrier bag machine, SOS block bottom bag machine with flat inside handle unit Photo cell 4 colour tail end printer Bottom patch Bag with handles: Bag width: 20-32 cm Tube length: 33-66 cm Bottom width: 7-18 cm Bag without handles: Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

Combi with 11.1.073 Novopac Shrink tunnel Remaining: 3 parts Chassis number: 4395905 Weight: 1,0 tons Power: 4 kW Air pressure: 7 bar L x w x h first part: 2600 x 1700 x 2000 L x w x h second part: 3200 x 2400 x 1700 L x w x h third part: 1775 x 3300 x 1500 Working height: 85 cm. Transport size L x W x H: 2,6 x 1,7 x 2,0 + 3,2 x 2,4 x 1,7 + 1,775 x 3,3 x 1,5 Min.-max. glass thickness: Max 300 mm Min.-max glass size: Max 1460 mm width Condition machine : Repaired after malfunction Control type: Automatic Electric. Connection: 400V Documentation: Available Instructions: Available Electric diagram: Available Parts list: No Remaining: Combi with no. 23073 Photos/film available: Photo's available

The servoCUT 402 / 502 / 602 cutting machines is designed as a wet cutting grinding machine for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramic or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERV ...

The SERVOCUT 602 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machines ...

Attention: Before purchasing a used universal tester / tractor, consider the old, used machine (all?) need new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – an expensive impasse! Purchase, pickup, software update (if possible?), commissioning, modernization are more expensive than a new galDABINI machine Quasar 600 kN incl. load cell 600 kN, Latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 | 200 | 250 for tests on steel, reinforced steel, plastic, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Q ...

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

TECHNICAL DATA: Clamping height max mm: 1040 Tenoning depth max mm: 150 Slot length max mm: 340 Main motor power HP: 3 Weight Kg: 340

Offer via gebr. refurbished - pipe cutting and chamfing machine Fabr. GF Type RA6 Saw was completely overhauled and tested. - Engine completely new - Gearboxes restored and new seals specifications: Pipe outer diameter 75-183mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed levels electronic 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Chain resisters L x W x H: 1.2 x 0.8 x 2.2 m Weight approx. 480 kg Year of construction 1977 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

-Model Colatrice REL 600 -with digital foil keyboard -380 volts -50 Hz -Year of construction 2001

End Milling Machine Drill Milling Machine working width mm: 3200 Left - right swivelling saws from 0° - 45°. Complete with drilling unit Suitable for machining doors and door posts.

Bosch Rexroth Linear Cylinder Machine The machine is a special production for Bosch for its own use in the production process. The machine contains: Rexroth MSK050C-0600-NN-M1-UG1-NNNN 3-Phase Synchronous PM Motor Festo DGC-40-650-KF-Y5R-A 532449 H608 Rexroth EMC-063-NN-2 Schischke MY_1106 E2 - Voltage 380-480, 6 bar, 1300 kg, year of construction 2016 Condition: used The plant is located in Hildesheim and can be dismantled and picked up there by the customer. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Machine base soil tillage machine, floor cleaning machine, floor curing machine -Manufacturer: Minuteman, Multi-Clean machine base tillage machine -Type: 670691 UV-8 Power Supply -Voltage: 230V -Dimension: 600/440/H370 mm -Weight: 29 kg

Vibrating screening machine VS 1000-1 Decker: - Modular and expandable modular system - Dustproof and safe to work - External/internal screen frames depending on the equipment - Stable design - Easy disassembly and cleaning of all components - Set ready for connection and ready for operation - Conical bottom for the discharge of the fine material - Drive via motors with ATEX protection zone 22 (standard) - German operating instructions (other languages at extra charge) - Ball tapping cleaning incl. standard balls per screen deck (standard) Size (mm) 1000 Screen area (m²) 0.694 - 0.785 Interference circle diameter (mm) 1620 Drive power (kW) 1.25 Weight (kg) 248 - 330 1 deck (total height mm) 1275 - 1285 Screening machine for screening in 2 fractions. All wetted parts blasted from VA 1.4301 (standard) and glass beads. Seals Screen frame made of silicone material (s ...

Rubber balls as wear material for your screening machines, vibrating screening machines, tumble screening machines: Diameter: 30mm Material: EPDM, NR/SBR, silicone, PUR, silicone (detectable), polyurtehane (detectable) Quantity: 1 pack (100pcs) possibly small quantities Price: On request (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)

Deflector profile in various versions as wear material for your screening machines, vibrating screening machines, tumble screening machines: Height: 27mm Material: Silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)

Deflector profile in various versions as wear material for your screening machines, vibrating screening machines, tumble screening machines: Height: 27mm Material: Silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)

Rubber lids as wear material for your screening machines, vibrating screening machines, tumble screening machines: Outer diameter: 100 / 150 / 200 / 250 and 300mm Material: NR45 and silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly with minimum order quantity)

Rubber lids as wear material for your screening machines, vibrating screening machines, tumble screening machines: Outer diameter: 100 / 150 / 200 / 250 and 300mm Material: NR45 and silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)