We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,567 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/4F/1L - double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 ouside milling unti - 1 outside sanding unit - 4 sides cabin with roof - kw 28 - year 1995
used
Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor -Transfer station: roller conveyor with conveyor belt, solid base frame, height adjustable -Speed: roller conveyor 51 m/min / conveyor belt 45 m/min -Conveyor rollers. Ø86 x 1415 mm rubberized wheels -Roller distance/axle distance: 205 mm -Belt spacing: 200 mm -Conveyor belt length: approx. 2290 mm, dimensions see technical photo. drawing -Drive/gearbox: 2x Nord, see photos of nameplates -Raising: hydraulic, without drive unit -Transport dimensions: 2480/2380/H810 mm -Weight: 1180 kg
used
Inv. Num. : 5843 Type: MBS 6000 Producer: FUCO-HEG Created: 2019 Parameters: Control system: Siemens Gas flow: 7-15 l/min Carburetor Head: Steel Crane Systems ST1004 Headstroke: 4 m/min Weight: 800 kg Length: 1000 mm Consumables: nitrogen and argon Purpose: Degassing and purification of aluminium melts with nitrogen or argon with a maximum pressure of 5 bar
used
PME inline embossing station for integration into an existing laminating line (coarse linen): - Rubber counterpressure roller (diameter: 250mm) - A water-heated embossing roller (diameter: 254mm) - Web tension control with load cell - Pneumatic adjustment of the counterpressure roller - Pitching pressure in the pinch gap 100kN - Main drive with 5.5 KW - Maximum mech. Speed: 60m/min. - Maximum working width: 800mm - Connected load: approx. 30KW - Power consumption: approx. 20KW - Compressed air requirement: approx. 2.5 Nm³/h at 6 bar - Easy to change the embossing roller - Year of construction 2013
used
Description: Dimensions of the washbasin: 650 x 650 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 1,000 x 900 mm, weight approx.: 200 kg
used
Key data: 130 , 200
MAN gas generator enclosed in sound proof chamber, in good condition. It has the following specifications: Manufacturer: MAN Fuel: Gas Manufacture year: 2010 Kva: 200 Power: 130 kW Other specs: Turbo included. Control panel included.
used
Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor, transfer station -Transfer station: 1x roller conveyor with conveyor belt, 1x conveyor belt -Base: solid base frame, height adjustable -Speed: roller conveyor 20 m/min / conveyor belt 23 m/min -Roller track: conveyor track rollers. Ø63 x 2500 mm, conveyor belt 17 x 2815 mm -Conveyor track: 6 belts 17 x 2830 mm -Drive/gearbox: North, see photos of nameplates -Transport dimensions: 2810/1660/H870 mm / 2900/920/H870 mm -Weight: 569 kg / 258 kg
Dear Ladies and Gentlemen, We now have used transformer stations available Year of construction : 2004 Power : 1000KVA Primary voltage : 20kV Secondary voltage: 400V, Groupset: DYN5 Switchgear: SF6 Station Dimension : Length: 250 cm Width: 240 cm Height: 245 cm Weight: 11 ton At call Nationwide cheap delivery. If you have any further questions, please do not hesitate to contact Mr. Schmidt. Available Monday to Saturday from 8 a.m. to 8 p.m. CLOCK and in case of emergencies 24 hours
used
Labelling station More then 300 machines new and second hand on our seema .de
used
Doosan gas generator in good condition. It has the following specifications: Manufacturer: Doosan Fuel: Gas Manufacture year: 2008 Kva: 600 Mass: 3740 Other specs: 10 cylinder, electric panel, complete.
used
Scania Schnell Engine in good condition with the following specifications: Power: 250kW Mfy: 2006 Fuel: Gas /Diesel (Dual fuel) Voltage: 400V
Mat bending machine Hambi TV 30 V = reinforced design, up to single rod 12 mm, Passage width: 3 meters, Weight: 645 kg
used
Bohle stationary column for drums and containers, suitable for feeding tablet presses etc. Maximum weight 600kg.
used
Available 2 units of this tranformer center on container with the transformer and his cell. Power:1600KVA Rate: 400-20000V YOM:2009-2007
used
Elpress hygiene station with sole cleaner, hand disinfection unit and inlet control, number: 83202050, year of construction: 20.11.13, 400 V, 50 Hz, 16 A, 1 kW, weight: 225 kg, length brush: (2x) 930 mm, total dimensions: 1600 mm x 900 mm x 1200 mm.
used
Key data: 790 KW, 738 kVA, 400 V
Deutz / MWM Gas CHP (Container) TBG 620 V12 Landfill gas generator from 1999 with 150,200 operating hours, E40 12/22, complete (container) with cooling. 1 available, 738 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I634K2-CG, 1,100 KVA Gas engine Deutz / MWM TBG 620 V12 Manufacturer: Deutz / MWM Model: TBG 620 V12 Type: Gas Engine (Landfill Gas) Serial Number: 2200633 Power [KW]: 790 Year of construction: 1999 Hours: 150,200, E40 12/22 Weight motor and generator [kg]: 7.800 Dimensions LxWxH [cm]: – AC Generator Stamford HC I634K2-CG Manufacturer: Stamford Model No.: HC I634K2-CG Type: AC Synchronous Generator Serial number: 0103530/01 Power [KVA]: 1,100 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 1602 Speed [1/min]: 1,500 Year of construction: 1999 Weight [kg]: 2.513
used
Limitec mobile container tipping and emptying device, for turning and emptying containers with a volume of approx. 70 litres, a diameter of 378 mm and a height of 604 mm, lifting weight max. 80 kg, electr. connection 400V/ 50Hz/ 0.6KW, machine dimensions 1300 x 730 x 1816 mm (L x W x H), machine weight approx. 200 kg.
used
Key data: 2000 KW, 2500 kVA, 10000 V
Deutz / MWM Gas CHP (Container) TBG 620 FV 20 Gas-fired power generator (mine gas) from 2003 with 95,000 operating hours, 22,000 operating hours after major maintenance, complete (container) with cooling. 1 available, 1,938 KWel x 1,500 rpm, 10,000 V/50 Hz (transformer 400 V optional). AC generator: AVK DIG 130 l/4, 2,500 KVA Manufacturer: Deutz / MWM Model: TBG 620 FV 20 Type: Gas Engine (Mine Gas) Serial Number: 2204013 Power [KW]: 2,000 Year of construction: 2003 Operating hours: 95,000 / 22,000 after major maintenance Weight motor and generator [kg]: 18.500 Dimensions LxWxH [cm]: – AC generator AVK DIG 130 l/4 Manufacturer: AVK Model: DIG 130 l/4 Type: AC Synchronous Generator Serial Number: 84 25722 A101 Capacity [KVA]: 2,500 Voltage [V]: 10,000 Frequency [Hz]: 50 Electricity [A]: 44 Speed [1/min]: 1,500 Year of construction: 2003 Weight [kg]: 7.100
used
Description: Consisting of polishing stand with brush, polishing stand with sanding plate, double bench grinder from the manufacturer SOLID (type: DS0, speed: 2990 rpm) Total table dimensions: approx. 1000 x 650 mm Approx. Onsite Dimension. (l x w x h): 1,100 x 950 x 1,300 mm, weight approx.: 600 kg
used
weight approx.: 400 kg, Approx. Onsite Dimension. (l x w x h): 2,800 x 1,500 x 1,250 mm
used
Approx. Onsite Dimension. (l x w x h): 2,300 x 1,900 x 1,200 mm, weight approx.: 500 kg
used
Description: composed of 1 NEXUS PC, 1 monitor, keyboard and mouse Approx. Onsite Dimension. (l x w x h): 600 x 800 x 600 mm, weight approx.: 30 kg
used
Description: Multifunction station Approx. Onsite Dimension. (l x w x h): 1,000 x 800 x 400 mm, weight approx.: 100 kg
used
Description: Multifunction station Approx. Onsite Dimension. (l x w x h): 1,000 x 800 x 400 mm, weight approx.: 100 kg
used
Description: Multifunction station Approx. Onsite Dimension. (l x w x h): 1,000 x 800 x 400 mm, weight approx.: 100 kg
used
Labelling machine for self-adhesive labels with 3 stations Front, back, top or wrap-around (roll-on) label Label width: 5-300 mm Label length: 10-500 mm Bottle format: round bottles and square bottles Capacity: up to approx. 6000 bph. (depends on bottle size) Complies with CE directive Weight: approx. 800 KG Dimensions: 3000(L)x1300(W)x1800(H) mm. Etimax Website: https://etimax.seema.de/ YouTube Video: https://youtu.be/zuztvYhDkNc Equipment: - TouchScreen SIEMENS - Control SIEMENS - Inverter SIEMENS -Station 1 front label -Station 2 back label/wrap-around (roll-on) label -Station 3 top label -belt conveyor for stabilising the containers with drive -2 side belt conveyors in the infeed for separating the products More then 300 machines new and second hand on our seema .de
used
Meiko mobile basket sorting station for 6 baskets, model: station de triage a paniers, serial number: 10174337, year of construction: 04.2011, 400 V, 3 Ph, 50 Hz, 1.1 A, 0.18 kW, plastic rollers, roller width: 370 mm, total dimensions: 4000 mm x 1400 mm x 1570 mm.
used
Transport belt with 4 working stations, s/s frame, plastic belt, belt width: 370 mm, total dimensions: 4450 mm x 1300 mm x 880 mm.
used
Bobet Materiel boot cleaning station, type: L.B.M 92 E, serial number: 1255, year of construction: 2006, 400 V, 3 Ph, 50 Hz, brush length: 360 mm, total dimensions: 1450 mm x 720 mm x 1350 mm.
used
Description: Width 900 mm Length 1500 mm Lifting capacity ,Max 700 kg Approx. Onsite Dimension. (l x w x h): 1,100 x 1,500 x 1,000 mm, weight approx.: 400 kg
used
Key data: 366 KW, 465 kVA, 400 V
MTU Gas Generator 12V400 GS gas-fired generator from 2016 with 46,137 operating hours, complete with control but without cooling. 1 available 352 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Leroy Somer LSAC 47.2M7 C 6/4, 465 KVA MTU E3042LH9 gas engine Manufacturer: MTU Model: E3042LH9 Type: Gas Engine Serial number: 0925-04-16 Power [KW]: 366 Year of construction: 2016 Hours: 46,137 Weight of aggregate [kg]: 1.720 Dimensions LxWxH [cm]: – AC Generator Leroy Somer LSAC 47.2M7 C 6/4 Manufacturer: Leroy Somer Model: LSAC 47.2M7 C 6/4 Type: AC Synchronous Generator Serial Number: 333779/2 Power [KVA]: 465 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 671 Speed [1/min]: 1,500 Year of construction: 2016 Weight [kg]: 1.253
used
Key data: 20 KW, 400 V
Development prototype of MA-C-S engineering, Augsburg. Total operating hours ~11,500 h. Originally: 20 kW Ford gas engine from Sauer & Sohn and Geno from E.W. Hof. At ~ 8,000 h: Conversion to 20 kW Toyota gas engine and new water-cooled asynchronous generator from Weier, both from IMT (Industrie-Motoren Technologie GmbH, Inh. G. Thier, Landsberg am Lech). Conversion execution and IBN by IMT. Control: Deif AGC4-GER-Y3-A1 Control cabinet designed and built by Maier Steuerungstechnik, Ruhstorf Heat exchanger from Triptiser stainless steel Not ready for operation (short circuit in relay in the control cabinet) CHP has no certifications.
used
Description: serial number: 1036 control: SIEMENS Simatic OP37  , without conveyor/loading system  , please also have a look at the PDF documents of this machine Approx. Onsite Dimension. (l x w x h): 4,000 x 4,000 x 3,800 mm, weight approx.: 15,000 kg
used
Description: serial number: 1037 control: SIEMENS Coros OP35  , without conveyor/transportation system  , please also have a look at the PDF documents of this machine Approx. Onsite Dimension. (l x w x h): 3,500 x 3,000 x 2,500 mm, weight approx.: 15,000 kg
used
TECHNICAL DATA Labelling machine for self-adhesive labels with 2 stations Front, back or wrap-around (roll-on) label Label width: 5-300 mm Label length: 10-500 mm Bottle format: round bottles and square bottles Capacity: up to approx. 6000 bph. (depends on bottle size) Complies with CE directive Weight: approx. 600 KG Dimensions: 2800(L) x 1300(B) x 2400(H) mm Etimax Website: https://etimax.seema.de/ YouTube Video: https://youtu.be/zuztvYhDkNc EQUIPMENT: TouchScreen SIEMENS Control SIEMENS Inverter SIEMENS Station 1 front label Station 2 back label/wrap-around (roll-on) label -belt conveyor for stabilising the containers with drive -2 side belt conveyors in the infeed for separating the products More then 300 machines new and second hand on our seema .de
used
- 1 VA tank (approx. 1500 ltr.), double-walled - 2 VA tanks (basement) - 1 osmosis system (for the production of chemicals) 3 tanks 1 water system (water tank) 1 Cooling 1 mixer 1 batch of various pumps 1 compressor
used
Description: The almost new 8 MW transmission test station is operated from a central control station. Some of the test energy input can be fed back into the power network. Inventory number: 9000945 , Year of construction: 2018 Data on the three-phase asynchronous machines Nominal output: 7.7MW Maximum output: 8.47MW Nominal speed: 1150/min Maximum speed: 2200/min Nominal torque: 63940 Nm Maximum torque: 70330 Nm Main shaft data Nominal speed: 8.99 rpm Nominal torque: 6000kNm Maximum torque: 8800kNm Cooling system Cooling capacity of the cooling tower: 900kW Coolant volume flow: 160m³/h at 4 bar and 30°C Nominal pressure hydraulics Hydraulic system main shaft: 250 bar at 100 l/min Hydraulic system quick coupling: 300 bar at 1 l/min Hydraulic system generator (lifting/lowering) 150 bar at 8 l/min Oil system: 8 bar at 120 l/min General data Operati ...
used
Seeding Station Lippelt Moli 580 Working width: 580 mm One-sided seed application 1x seeding container with brush 1x seeding container with fine and coarse spreading roller Humidification via water bath Pressure roller for attaching the seeds to the dough pieces Wire belts, removable Movable underframe for seed collection container Control with start/stop button, 2x potentiometer for belt speed and the seeding rate and emergency stop button
used
propulsion: 0,75 kw motor wihtout brake 1380 r/min description: with pusher and modular belt availability: immediatelly Installation dimension: 1405 x 1120 x 200 mm Usable width: 500 mm transport size: 1550 x 1200 x 1300 mm weight (m) [kg]: ca. 250 kg Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-si ...
used
propulsion: SEW motors description: We are offering a complete empty pallet checking station incl. a GOOD pallet magazina and a BAD pallet magazine, incl. chain- and roller conveyors as well as incl. a protecting fence The placement can be adapted individually. Pallet inspector, pallet inspection machine. We do also have more conveyors on stock which we could offer you. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or ...
used
Ironing uniting machine System Dr. Datz Used Power up to 11000 Fl/h Direction of rotation: right - left Furnished for 0.33 l and 0.5 liter bottle
used
used
Used SHREDDIES production line Manufacturer: CPM WOLVERINE PROCTOR Ltd. Model: 5-station SHREDDIES production line Year: 2016 Description: A five-line production line for multilayer flakes from crushed grains. Finished product capacity: 700 kg / h Line speed: 54m / min. Finished product density: 200> 220 g / l Overall dimensions and setting of the machine: length x width x height: approx. 10929 x 1600 x 4685 Design diameter of the grinding roller: 203 mm Design working width of the chopping roller: 210 mm Rotational speed of the grooved roll: 20-85 m / min. Design number of positions: five (four working, one spare) Design width of cutting station conveyor: 230 mm Nominal design width of the edge trim: 12 mm per edge, total 24 mm Design product size: approx. 25 x 25 mm Technical data: Dimensions (length X width X height): Power supply: 400 V, 3 phases, 50 Hz Control v ...
used
with FESTO rotary table 360 mm numbers of drilling units: 29433, 29616. 29617, 29797 and 29798
used
used
used
Big Bag filling station, filling and weighing system used The system consists of the following components: 1 filling hopper approx. 2300 height 2500 mm 2 stainless steel trough screws 1 tumbling/shaking sieve approx. 1200 height 1900 mm 1 BigBag filling station approx. 1950 x 2400 x 3700 mm 1 control cabinet The Big Pack filling is filled by wheel loader or forklift via a pouring funnel. The filling material is transported via a conveyor screw to a tumbling sieve. From there, transported with another screw to the actual weighing and filling station. The big bags lie on a vibrating floor when filling and are thus compacted.
used
Mobile marking station Marking of metal parts - was used in Faurecia Machine checked - fine, ready for use
used
STANDARD-EQUIPPED
used
STANDARD-EQUIPPED