labeling station used for sale

Combined heat and power plant with generator El. Power: 40 KW Thermal power 72 KW Fuel: natural gas Mains connection 400 V 50 Hz 100 A Flow 90 C Return 70 C Pressure 16 bar Generator 60 KVA Length 2.40 m Width 1 m Height 1.60 m

90 ° corner station with motor speed control rotating plate diameter 250mm clockwise without foot More then 300 machines new and second hand on our seema .de

90 ° corner station with motor with speed control and rotating plate diameter 250mm without foot - counter clockwise More then 300 machines new and second hand on our seema .de

Key data: 544 KW, 680 kVA, 400 V

Well-preserved diesel generator Low operating hours has been at a standstill for the last 10 years. Mailable Exhaust gas heat exchanger + bypass, muffler, table cooler, available.

Double station, fuel oil pump, 2x screw pump KRAL type: DS1 750.11X flow rate: 13.7 l/min delivery pressure: 4 bar speed: 2900 rpm viscosity: 6 mm²/s engine: AEG Type AM 71 NX2 0,55 kW 2760 rpm 218 - 242 / 380 - 420 V 3AC 50 Hz IP55 60 Hz - operation is possible ! used, tested ! Dimensions ( without connecting pipes ): 390 x 360 x 430 mm

Ref. -No.: 10197 Manufacturer: N/A Storage location: Halberstadt

Ref. -No.: 10198 Manufacturer: N/A Storage location: Halberstadt Further information: autom. welding station with positioner

Ref. -No.: 10195 Manufacturer: ESAB Storage location: Halberstadt Country of origin: Schweden serial number: 620-703-3544

Manufacturer: MBusch, Type: MB LA 500, Year: ca.1997, Working widht mm: 600, Working hight mm: 80, Workstations: 4, Glue jets: 4, Schlitz und Zapfenbeleimung: yes, Pneumatical work piece clamping: yes, Fusspedal Takt: yes, Wasseranschluss zum reinigen: yes, Leimpumpe: yes, Movable: yes, Automatical glue supply: yes, Compressed air bar: 6, Year :ca.1997

Working direction: left-rightNumber of self-adhesive stations: 2with capsule applicatorLocation: Geisenheim More then 300 machines new and second hand on our seema .de

• DataMatrix station for labelling and verification of folding boxes, cartons and rectangular bottles (serialisation and aggregation). • Output max. 400 items/min, belt speed 5 - 90 m/min • Data matrix code square 10 x 10 - 144 x 144 modules, rectangular max. 16 x 48 modules • Various other readable code types, including Pharmacode • Product run from left to right • Product transfer by alignment belt, consisting of lower (600 mm long) and height-adjustable upper belt (400 mm long) • Ejection belt 300 mm long • Product height max. 150 mm, product width 45 - 130 mm • Bad product ejection by pneumatic pusher with collecting container • Ejection countercheck • Central height adjustment for printer and camera • Light barrier for product detection (trigger) • 1 LAN PCE camera Mini-Smart, plain text/code control 6.217 • 3 installation positions for camer ...

1 piece of used scraper / scraper Manufacturer: Liebherr Type: LSM 16/11 Completely overhauled/repaired in 2022 Year of construction 2009 In perfect condition AT CALL Location: Southern Germany Price on request Offer and prices are purely net ex location Subject to prior sale, errors and/or misrepresentations excepted, without guarantee and/or warranty, as seen, lying and/or standing

Pfeiffer Vacuum Hicube 300 brand new, in stock. 12 months warranty.

Corner transfer unit, roller conveyor, roller conveyor, powered roller conveyor, roller conveyor, roller conveyor with extraction conveyor -Execution: stable -without drive motor roller conveyor -Roll width: 590 mm -Conveying length: 1800 mm -Diameter roller: 80 mm -pneumatic lifting: 30 mm -Delivery height: mm adjustable -Number: 1x stations available -Price: per piece -Dimensions: 2070/925/H205 mm -Weight: 266 kg

Corner transfer unit, roller conveyor, roller conveyor, powered roller conveyor, roller conveyor, roller conveyor with extraction conveyor -stable execution -driven: electric -Drive motor roller conveyor: 0.37 kW 71 rpm -Drive motor conveyor belt: 0.37 kW 88 rpm -Roll width: 870 mm -Conveying length: 950 mm -Transfer of conveyor belts: 1000 mm -Lifting: pneumatic -Diameter roller: Ø 65 mm -Rollers: rubberized -Shaft diameter: Ø 15 mm -Delivery height: 570 mm adjustable -driven: via toothed belt -Dimensions: 1100/1050/H5700 mm -Weight: 230 kg

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, blind conveyor belt, slat conveyor belt, transfer station -Transfer station: Conveyor belt with tipping function, comes from blind production -Speed: 10 m/min -Conveyor belt width: 6050 mm -Conveyor belt length: approx. 880 mm, dimensions see technical photo. drawing -Drive/gearbox: 2x Nord, see photos of nameplates -Transport dimensions: 6050/910/H960 mm -Weight: 520 kg

Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench, rivet gun, rivet gun, blind rivet gun, -Drive: torque module for Hilok assembly -Torque: adjustable via touch screen -Number of press-in cylinders: 1 piece -Number of helical gears: 1 piece -Working platform: 800 x 500 mm -Travel: Y 400 mm, X 955 mm -Dimensions: 1555/1470/H2110 mm -Weight: 794 kg

Aerospace telephone system, radio network -Manufacturer: Cisco, Aironet BR1310 -Type: AIR-BR1310G-E-K9-R -Dimensions: 205/205/H80 mm -Weight 1.1 kg

Setup station, pallet changing system, pallet changer, pallet storage, tool changer chain, chain magazine, tool changing system, tool magazine -Setup station with: Garant ZERO CLAMP G-11886 -Manufacturer no.: 101545300002672 - 21063 1721559 -Dimensions: 400/400/H810 mm -Weight: 232 kg

Turning station, turning table, turning station, turntable, hydraulic press, workshop press, oil hydraulic press, workshop hydraulic press -without: hydraulic unit (can be delivered at an additional cost) -Turning station for: turning workpieces -Interior width: 1075 mm -Inside height: 720 mm -Transport dimensions: 2840/1600/H2300 mm -Weight: 969 kg

Turning station, turning table, turning station, turntable, transport system, roller conveyor -for: edge banding machine, edge banding machine, edge banding machine -Turning station: for turning workpieces -Roller conveyor: wide -Roll width: 2900 mm -Roller conveyor length: 1500 mm -Turning head roller: rubberized -other roller conveyors available for an extra charge -Transport dimensions: 1500/3850/H1950 mm -Weight: 969 kg

Corner transfer unit, roller conveyor, roller conveyor, powered roller conveyor, roller conveyor, roller conveyor with extraction conveyor -Execution: stable -Drive: electric -Drive motor roller conveyor: 0.37 kW 71 rpm -Drive motor conveyor belt: 0.37 kW 88 rpm -Roll width: 1440 mm -Conveying length: 1400 mm -Transfer of conveyor belts: 1400 mm -pneumatic lifting -Diameter roller: 105 mm -Rollers: rubberized -Diameter shaft: 25 mm -Delivery height: 2150 mm adjustable -driven: via toothed belt -Dimensions: 1600/1750/H2150 mm -Weight: 500 kg

Soldering station, soldering iron, chip solder, soldering system -Temperature adjustable: 100-375 ° -Dimensions: 200/105 / H90 mm -Weight: 2.7 kg

Corner transfer unit, roller conveyor, roller conveyor, powered roller conveyor, roller conveyor, roller conveyor with extraction conveyor -Drive: electric -2x drive motor roller conveyor: 0.75 kW -without drive motor conveyor chain -without conveyor chain -without raising -Roll width: 840 mm -Conveying length: 2300 mm -Transfer of conveyor chain: 4700 mm -Diameter roller: 50 mm -Delivery height: 400 mm adjustable -Dimensions: 2400/5400/H400 mm -Weight: 1200 kg

Corner transfer unit, roller conveyor, roller conveyor, powered roller conveyor, roller conveyor, roller conveyor with extraction conveyor -stable execution -without drive motor roller conveyor -can be installed at an additional cost -Roll width: 700 mm -Conveying length: 1780 mm -Diameter roller: 80 mm -Transfer of conveyor chain: 880 mm -Transfer of conveyor chain width: 950 mm -1x drive motor conveyor chain: 0.37 kW -Speed: 11.4 m/min -pneumatic lifting -Delivery height: mm adjustable -Number: 1x stations available -Price: per piece -Dimensions: 1850/1450/H550 mm -Weight: 386 kg

Transfer station, stop table, feed unit -Stop is moved via a: trapezoidal thread spindle -Spindle stroke: 850 mm -Execution: stable -Drive motor: 0.37 kW -Speed: 250 rpm -Number: 1x stations available -Price: per piece -Dimensions: 1825/500/H920 mm -Weight: 138 kg

Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench -Torque module: for mounting water meters or other screw connections -Frequency converter: from Yaskawa type VARISPEED 616G5 -Mounting device: for water clocks -Speed and torque: adjustable -various Recordings: for water clocks -Dimensions: 1500/650/H2060 mm -Weight: 314 kg -The two geared motors each have a power: of 1.5 kW and a speed of 38 rpm -Dimensions: 880/600/H920 mm -Weight: 132 kg

Key data: 537 , 400

Pro2 container unit with 537kW el. Performance as a pure power generator incl. heat recovery system - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TCG2016V12 - 537kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current operation hours about 87,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling wat ...

Pro2 container unit with 311kW el. Performance as a pure power generator - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TBG 616V8K - 311kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current bra number only about 95,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling water circuit, designed for th ...

Hydroelectric power station - Power 790 kW composed of: 1 Turbine Pelton / Effective gradient 223m / Water volume 400 l/s / 1 piece generator 1 shut-off device 1 hydraulic power unit 1 piece transformer

Used three-station slat banding machine by KURZ model LS101. New 1998. Allows trimming of three sides of the profile in one pass.

Dear Ladies and Gentlemen, we have transformer stations 250KVA 20KV on 400V built in 1992 See photos If you have any further questions, please call 00491727265324

3-axis welding station including 6-axis robotic arm complete with extraction hood and torch cleaning fume purification

TFT FCS 720 - 3 Station Thermoforming Machine The machine working hour is 73.000. Year 1994. Max Tooling Area : 685x500150 Min Tooling Area : 350250 Max Forming Area ( ROLL ) : 720500 Maximum Cycyle : 35 Maximum Material FOR FORMING : 1,5mm. It’s avaliable for PS,PET,PVC, PET. It has tauten but we advice pre-heater for PP.

Used CIP station composed of: - 4 tanks with a capacity of 3000 L each: fresh water, acid, lye, hot water - 2 disinfectant tanks - 2 steam-water heat exchangers for heating media - 1 steam-water heat exchanger for heating secondary water - 2 gu30/30 pumps, 1 gh 20 pump - 1 control cabinet – Siemens PLC control - pipes + valves + meters + sensors

Silberhorn 6-Station Rotary Table System In this rotary table cleaning system, the cleaning processes run in parallel and in the highest quality: Station 1: Loading and unloading Station 2: Cleaning with tank 1 Station 3: Rinsing with tank 2 Station 4: Rinsing with tank 2 Station 5: Pre-drying with side channel compressor Station 6: Vacuum drying This is what makes this 6-station rotary table system so powerful and ideal for cleaning large series. Installation area: approx. 3,600 mm x 3,530 mm x 6,900 mm (W x H x L) Goods window: approx. 450 mm x 300 mm x 150 mm Areas of application: Cleaning of series and large series Doors of the stations equipped with safety glass – this facilitates process observation Cleaning cycles of less than 30 seconds can be achieved Goods windows also for large parts Very robust and precise design of the system. This makes it possible to ...

Wing stop center Make: ITS Fenstertechnik Type FAZ 2800 No. 526 Built in 1991 With screw feeder Powasert Type ADS-UF Table support with brush strip Table length 2800 mm Table width 1400 mm Table height 950 mm Table can be tilted by approx. 15° Total length 2950 mm Width 2000 mm Height 1000 mm + Screw feeder

Key data: 600

MWM TCG 2016V12 600 kW el. power, 50 Hz after main overhaul with, also prepare TC, Intercooler, alternator) genset. Fully completed - also possible option add: control panel, power switch automat, container, cooling an heat system.

Year of construction 2008 Pumping and control station Previously used on Heidelberg machines Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Falzwerk 3. Station Eigensteuerung  / Folding Unit 3. Station SelfControl MBO T79-3-46/2 Baujahr / Year 1994 - Serial-No. 940114747 2 Taschen Falzwerk / 2 buckles folding unit Arbeitsbreite max. 460mm / Working width  max. 460mm Eigensteuerung / SelfControl   Nachgelagterte Messerwelle /  rear mounted slitter shaft -Online-Video-Inspection by Skype-Video-   -We would be very pleased with your visit - more machines on Stock-   -Available Immediately - Can be inspect-   -On Stock Emskirchen / Nuernberg - Can be test-

Falzwerk 2. Station Eigensteuerung  / Folding Unit 2. Station SelfControl MBO T79-2-81/4 Baujahr / Year 1994 - Serial-No. 940114747 4 Taschen Falzwerk / 4 buckles folding unit Arbeitsbreite max. 460mm / Working width  max. 460mm Eigensteuerung / SelfControl Nachgelagterte Messerwelle /  rear mounted slitter shaft -Online-Video-Inspection by Skype-Video-   -We would be very pleased with your visit - more machines on Stock-   -Available Immediately - Can be inspect-   -On Stock Emskirchen / Nuernberg - Can be test-

Banderolieranlage fuer Banknoten und Schecks - Banding system for banknotes and cheques ATS US-2000 SIB-BIN3 Year 2009 - Serial-No. BTA 734 V5A96330 Performance - up to 24 bandings per minute Band width - 20, 30, 50 mm Voltage - 230 V, 13 A -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Engine type: 18V34SG Electrical power output: 5500kWe, 6838kVA Engine speed, direction: 750rpm, CW Generator type: ABB HSG 900XS8, 15kV, 50Hz Engine control system: WECS 3000 Turbocharger: Napier NA 355 Fuel: Natural gas Application mode: Cogeneration power plant Year: 1995 Running hours: 54855 h Running hours since last overhaul (48721rhs, 05.2010) 6131 h Next major overhaul: 64000 h Original installation: Denmark Genset condition: Excellent Stopped: 08.2022 Service history and documentation: Available Location: Denmark (will be in Hungary 2024 Q2) Scope of supply: Genset Heat recovery Gasramp Silencer lube oil tank Starting air compressor and vessel

Compressed air screwdriving station 4 PCS available Price per piece VAT not deductible Please inquire with location and postcode.

Modular cell culture station in hypoxia Biospherix X2-072514-1-00 1. Isolated workstation for cell culture work under controlled conditions. 2. Multiple incubation chambers, with independent O2/CO2/RH programming. Various sizes and configurations. 3. The incubation sub-chambers have doors that open into a large glove handling area with an aseptic and temperature, O2 and CO2 controlled environment. 4. O2 control from 0.1% to 99.9% is possible in each incubator. 5. Low humidity interior atmosphere in the crop handling chamber that reduces the risk of contamination. 6. Heated interior atmosphere and work surface. 7. Chambers for housing equipment (microscopes, bioreactors, centrifuges, pipetting stations, refrigerators, lyophilizers, cell sorters, robots, FACS, etc.) also with controlled atmospheres. 8. Control of the O2 level also in the SAS or input/output exchange airlock for ...

Presstation / Press station Stahl PS 46 Year 1988 - Serial-No. 26184 Arbeitsbreite / Working width max. 460mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Key data: 1558 KW, 2300 kVA, 400 V

Engine Make: MWM Engine type: TCG 2020 V16 Power: 1558 kW RPM: 1500 Fuel: Natural gas Hz: 50 Year of manufacture: 2007 Operating hours: 57,000 h Scope of delivery: Motor+generator on base frame, motor control TEM, throttle line, pumps.

TF Winding Technology Rewinding Station TFU 1202 The rewinder can be programmed via a hand-held terminal and offers a fully automatic winding process. It can be rewound from left to right or right to left, with or without a loop. The torque is also adjustable. The device is fully functional and has hardly been used. Feel free to contact us if you have any further questions.

SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/3F/1L - double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 outside sanding unit - 4 sides cabin with roof - kw 28 - year 2002

SECOND-HAND CARROUSEL FOR CORNER BLOCKS WITH 4 WORKING STATIONS