labeling machine used for sale

Straight runner for applying a sign or wrap-around label (with glue) to cylindrical containers,, Gluing height: 205mm, (optional 255mm possible) classic strip gluing, Label length: 80 – 335mm (e.g. 99mm, 850g can), Performance: max. 9,000 containers/hour, without restrictions, as label lengths are independent, Frequency controlled with fully automatic speed control, Triggering the labeling process via photocell, Incl. glue pump with heating and stainless steel lid, Silver grey paint finish, The machine comes from a small factory and was only used sporadically,, This makes it excellent. However, it has been technically and visually overhauled and is therefore in perfect condition., Including 6 months warranty on mechanical parts (excluding wear parts), The sale includes one format set of your choice, additional format sets are available optionally at an additional cost., Optionally avai ...

Linear runner for applying sign or wrap-around labels (wet glue) to cylindrical containers., Perfomance:, approx. 25-100 labelings/min freely adjustable via frequency converter, Design type:, Left-hand machine (The overlapping direction of the wrap-around labels depends on this), gluing:, 210 mm brass glue roller with quick change device with one pitch, from 19 to 3 mm (horizontal stripe gluing over the entire length of the label), label magazine:, Up to 3,500 labels with a length of 80-380mm, Working height of the conveyor belt:, 1,000mm, adjustable +-50mm, Carrier:, 80.5mm chain, length approx. 3m/ with snail, glue supply:, pleumatic glue pump with heating, Paintwork:, light gray Ral 7042, unless stainless steel, Electrical equipment according to VDE regulation: 400 volts, 3 phases, 50 Hz, control voltage 24, Volts / PLC Siemens, Degree of protection: IP-54, Connection value: approx. 0 ...

Fully automatic labeling machine for self-adhesive labels K7,, Hourly output 500-800 labels / h, compact and on wheels, ideal for low power, space-saving, Standard equipment:, • Station for body labeling with brake motor, • Control panel with potentiometers, • Equipped for cylindrical glasses, bottles and smooth cans, • Monoblock construction in stainless steel, • Working direction from left to right, • Possibility to put in line, • Fixed bottle collection table 40x50cm, • Power connection 400 volts 50 Hz., • CE protections and user manual, • additional equipment front and back labels from the same roll incl. •, Weight: 200.00 kg, power: 500-800 labels / h

2 labeling units for applying a lid and a body label,, Dispensing width SES 80: 85 mm, SES 120: 125 mm,, dispensing speed: 0 - 60 m/min,, Unwind: diameter: 300 mm,, spool: diameter: 170 mm,, was used to label plastic cans.

Langguth labeling machine rotary, Type: E50/-2/4, Year of construction: 1999, Format parts for containers with body diameters of 122mm, 75mm and 57mm as well as various spare parts and glue pumps included., 2 stations - Machine applies front and back label with wet glue over 4 plates., Output max. approx. 3,300 containers/hour

Labeller for disposable syringes Manufacturer: Bausch & Ströbel Type SME 6005 This machine allows the insertion of labels (self-adhesive labels), as well as piston rods into disposable syringes. Capacity 6000 syringes/h Volume of syringes 0.5 to 10 ml Diameter of syringes 7 to 17 mm Label dispenser LAETUS Control Camera

A Gernep cold glue and self-adhesive labeling machine is available. Rated capacity: 8000bottles/h, direction of rotation: clockwise, control range: 1400-9000bottles/h, bottle format volume: 700ml, tamper-evident label: available, bottle formats: 10, bottle contents: spirits, application: neck ring label/body label/back label/tamper-evident label, including optical label inspection, date coding, self-adhesive dispenser, two cold glue units, bottle counter and two different bottle locks. Documentation available. An on-site inspection is possible.

- with 6 plates - with 2 labeling stations (front- and back label) for self-adhesive labels

capacity / hour ca.: 12000 working direction: right-left (CCW) Strom / Volt: 400

capacity / hour ca.: 6000 working direction: left-right Strom / Volt: 14

For self Adhesive? Labels and Wet Glue Format Parts for Bottle Size 0.375l , 0,75l , 2.0l

Labeling machine - Ref 3880 Manufacturer: COLTREGE Year: 1994 Serial Number: 940017 434 Label application underneath Format range: - Conveyor spacing 0-125mm - Tread width: 40mm Marking head: Collamat 3100 Speed up to 800 prints/min Max print area: 50x30mm Overall Dimensions (LxWxH): 1430x900x1400mm Power: 230V, 50Hz, 3kW Auction-ID: A1-47051-66

Case Labeling Machine - Ref 6429 Manufacturer: Neri Model: SL 100 Year: 1992 Serial Number: 136-92 Toshiba TEC B-SX4T Print Module Belt width: 500 mm Overall dimensions (W x D x H): 1030 x 1020 x 1580 mm Weight: 250 kg CE compliant Incoterm: FCA Auction-ID: A1-47051-125

Labeling machine - Ref 6369 Manufacturer: SFE Model: ETIQ. RAL Year: 1999 Serial Number: 2518 / B Isivision printing system PLC: Omron Sysmac CQM1 Operator console: Lauer PCS 950 Overall dimensions (W x D x H): 2980 x 1500 x 2100 mm Weight: 1000 kg Documentation: electrical diagram, pneumatics, PLC program CE compliant Incoterm: EXW Auction-ID: A1-47051-44

GERNEP labelling machine for cold-glue labelling of glass bottles., Additional title: cold glue labeling, Capacity: 9000 bottles/h, Power: 8 kW, Current: 16 A, Voltage: 400 / 230 V, Frequency: 50 Hz, Compressed air: 5 bar; consumption 42 m³/h, Length: 2100 mm, Width: 1600 mm, Height: 2100 mm, Weight: 2300 kg, Formats: 0.5 l goiter neck bottle, 0.5 l Euro bottle; 0.33 l longneck bottle, Running direction: from right to left, Operation / Control: Siemens S7-200, Position: free standing, Features: 0.5-litre goiter neck hanger bottle: hanger/torso/back, 0.5-litre euro bottle: chest/torso/back, 0.33-litre longneck: neck ring/torso/back

Additional title: Roboband / Logomatic, Capacity: 150 paletts / h, Power: 5,5 kW, Current: 10 A, Voltage: 400 Volt, Frequency: 50 Hz, Weight: 1700 kg

Overview  This labelling machine was manufactured in 2017 by NCM Maquinaria. The machine is designed for labelling applications in the wine industry. The machine is currently still installed and can be visited on request. Technical data  Capacity: 1,500 – 2,000 bph Application: Wine Configuration: Model LV+5 Type: Self-Adhesive Compatible Bottle formats: 250 ml – 500 ml – 750 ml 1 L - 1.5 L Nº of Heads: 4 Label Types: Front, back, neck and fiscal stamp labels

Multi-function labeling machine: scale, item list, daily report, etc. 17 label rolls included Auction-ID: A3-43544-39307

Semiautomatic Etikettierer fair model - Hence, as good as new state Bj.2012 donation possibilities: 1 label: 2 etiquettes: Orients: Straightened in the bundle other infos on inquiry

used Palettenetikettierung

Etikettierer (semiautomaton) to application of round etiquettes 230 V of connection / air pressure inevitably an easy service / quick arrangement this Etikettierer is suitable especially for smaller production loose dimensions. further information on inquiry

Etikettierer (semiautomaton) to application of etiquettes on all angular bundles and especially for the Nachlabeln of tubes suitably 230 V of connection / air pressure inevitably an easy service / quick arrangement this Etikettierer is suitable especially for smaller production loose dimensions. further information on inquiry

; ready for operation

The detected defects from a camera system are transferred via an interface to the fault marking system, where a label is then placed as a marker on the side of the film roll. Project number 2010 / A8392 Rated voltage 230 V; 50 Hz Rated power 1 kW Dispensing speed 1-600 mm/s (depending on label size) Positioning speed 25-30 mm/s Thermal Transfer Printer

Cardboard labeling HERMA DS

COVER LABELING SYSTEM SCHLEUTER GU 2 DU WITH CIRCULAR STATION FOR PLACING SPOONS RNA SRC-N-630-1R M. No.: 12086 Performance: 60 lids per minute Consists of: - Stacker - Circular station for placing spoons - Labeling unit - Stapler

COVER LABELING SYSTEM SCHLEUTER GU 2 DO WITH 2xSTATIONS FOR PLACING SPOONS M. No.: 12087 Performance: 90 lids per minute (spoon inserted diagonally) Consists of: - Stacker - 2xStations for placing spoons - Labeling unit - Delivery station

COVER LABELING SYSTEM (Zweckform with Schleuter label dispenser) Age : ca. 1990 Performance: 100 cups/lids per minute Equipment / Additional information: Consists of: - Stacker - Labeling unit - Stapler

HR 2K inkjet printer barcode labeling RA2309 Printer manufacturer: REA-JET Printer type HR Operation: Control unit with control panel Print type: Inkjet printer interfaces: Eternet Stainless steel control unit in IP65 design Full-color graphic display, diagonal of 14.4 cm (5.7 inches) Graphic user guidance in many languages Support for True Type Fonts (TTF) and Unicode character set Operation: ten-key keypad, cursor block, push and turn operation REA JET HR 2K (with 2 writing heads, up to 25.4 mm writing height) Maximum speed of the system: 762m/min at 60 dpi resolution. 142m/min at 300 dpi. Maximum is 600 dpi. Condition: Worked until dismantling, we have no cartridges available for prior testing. Electrically everything seems to work perfectly (see photos) Abrasion on the rotary encoder (see photo) and USB cover is missing (see foro). Prices net plus VAT ex central warehouse Dr. Sonn ...

Labeling system PRINTWOLF from 2013 for glasses and small bottles (approx. 60ml - 250ml),, very good condition, 2 Collamat label dispensers for self-adhesive labels, Labeling of the front label (on the glass) also possible in two parts, labeling of the lid, PLC control (Siemens),, high-quality sensors, also detect black and transparent labels, Vacuum rewind belt with 2 different feed screws., Angular glasses (hexagon/octagon) can also be labeled, Labeling speed: 18 meters / min (about 80 glasses), Labeling accuracy: +/- 1mm, Supply: 400 V 50 Hz power approx. 1.5 KVA, Aluminum - stainless steel frame., The belt length of the machine is 3.97m., Separate control cabinet, Matching, additional packaging table with conveyor belt, The work table has dimensions of 1.20 x 2.32 x 0.94 m W/L/H (table top), The total length with tape overhangs is 3.20m, power: Labeling speed: 18 meters / min (about  ...

Strasbourg Labeling Service SES-120-II Hotmelt labeler for square and round containers, configured for 0.1 ltr, 0.25 ltr, and 0.5 ltr pocket bottles, etc., for square containers with 2 labels or for round containers with one label., Output up to 4,000 units per hour, worked until the end... ran only 10 times a year

Labeling with serialization Manufacturer: Uhlmann Type USP 2 Serialization, capacity max. 300 cartons/min. Consisting of: 1. Print/verification module with REAJET HR printing system and Visio Read camera system. 2. Tamper-evident protection module for labels on the front and back of the folding box. Format range: Folding carton width A: min. 30 mm, max. 130 mm Folding box height B: min. 15 mm, max. 105 mm Folding carton length H: min. 67 mm, max. 240 mm Max. oversquare format A/B = 1.5 Folding carton weight max 300 g GMP, last use Pharmaceutical

Labeling with serialization Manufacturer: Uhlmann Type USP 2 Year of manufacture 2020 Serialization, capacity max. 300 cartons/min. Consisting of: 1. Print/verification module with REAJET HR printing system and Visio Read camera system. 2. Tamper-evident protection module for labels on the front and back of the folding box. Format range: Folding carton width A: min. 30 mm, max. 130 mm Folding box height B: min. 15 mm, max. 105 mm Folding carton length H: min. 67 mm, max. 240 mm Max. oversquare format A/B = 1.5 Folding carton weight max 300 g GMP, last use Pharmaceutical

Label roll: 250 mm Height of dispensing edge from floor: adjustable from 50 to 100 cm. Mobile on wheels

Suitable for printing and applying labels Equipped with integrated printer module Equipped with label roll holder Version with conveyor belt Equipped with emergency stop Year of construction: 2012 Supply voltage: 200–240 V Frequency: 50/60 Hz Maximum weighing capacity: 6 kg Minimum weighing capacity: 20 g Graduation: e = 1/2 g Made of stainless steel and plastic housing Made in Japan Auction-ID: A1-40113-165

Labeling Head - Ref 6413 Manufacturer: Neri Quantity: 2 Overall dimensions (W x D x H): 1600 x 1000 x 850 mm Weight: 120 kg Incoterm: EXW Auction-ID: A1-47051-121

Case Labeling Machine - Ref 6152 Manufacturer: Neri Model: SD 300 Year: 2003 Serial Number: MSDA06401 Label application on a case Overall dimensions (W x D x H): 800 x 650 x 1900 mm Weight: 70 kg Power supply: 400 V 3-ph / 50 Hz Power: 1 kW CE compliant Incoterm: EXW Auction-ID: A1-47051-53

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

TIG welding machine, electric welding machine DALEX type TGKW 55 (AC-DC)Series No. 532521 year of construction approx. 1975Power 225 Amp. = 60 % ED 125 Amp. = 100 % EDEsetting range 2.8 to 225 ampereCurrent type direct current and alternating current (AC-DC)Mains connection 380 volts, 50 Hz- Power setting via 5 coarse steps and fine adjustment via rotary potentiometer infinitely variable- 2-stroke and 4-stroke welding device- Remote controller with rotary potentiometer for fine adjustment- Digital display for ampere- TIG hose package 4 meters- Welding gas pressure reducing valve-

Working width: 400 mm; Working height: 220 mm; minimum workpiece length: 250 mm; Aggregates: 2; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Tynex brush, 80 grit, diameter 220mm; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 3 kW; Motor power feed: 0.37 kW; Machine length: 1400mm; Machine width: 1400mm; Weight: 550kg;

Working width: 600 mm; Working height: 5mm to 300mm; minimum workpiece length: 250 mm; Aggregates: 2; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Tynex, diameter 210mm; Height adjustment: electric; Altitude display: digital; Feed speed: 4 - 14 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 4 kW; Motor power feed: 0.37 kW; Machine length: 1400mm; Machine width: 1500mm; Machine height: 1600mm; Weight: 700kg;

Working width: 600 mm; Working height: 220 mm; minimum workpiece length: 250 mm; Aggregates: 4 ; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Metal, diameter 220mm; 3. Brush: Tynex grit 60, diameter 220mm; 4. Brush: Tynex grit 120, diameter 220mm; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 4 kW; Motor power feed: 0.37 kW; Machine length: 2800mm; Machine width: 1500mm; Machine height: 1600mm;

Working width: 380 mm; Working height: 150 mm; 1st unit, rotor group: group of 5 rotor brushes oscillating, Ã ̃ 115 each one motor 3 kW; 2nd unit, brush: Scotch Brite Hard / diameter 210mm, vario drive; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power feed: 0.37 kW; Vacuum carpet: yes; Machine length: 1400mm; Machine width: 900mm; Weight: 500kg;

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser  ...