lab mixer used for sale

Homogenizer LAB 12.50H, SN.1-84.195 Flow Rate 100 l/h at max. 600 bar Single-stage homogenizing valve with manual adjustment poppet valves, Main motor 2.2 kW, 400V, 50Hz

turning diameter: 720 mm turning length: 4000 mm control: Siemens 805 turn - diameter over facing slide: 360 mm spindle diameter: 100 mm spindle passage: 100 mm 3-jaw-chuck diameter: 400 mm 4-jaw-chuck diameter: 250 mm steady: 360 mm total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m 3- jaw chuck diameter: 400 mm 4- jaw chuck diameter: 250 mm Fixed bezel diameter: 360 mmIncludes: 4 jaw turrets and coolant. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diosna Dough Machine Model: Laboratory Kneader Stainless steel boiler and kneading arm for max. 6 kg dough Protective grille with protection circuit 2 gears Machine base mobile DGUV V3 tested E-system NEW Connection 400V, 3 Amp, 16A-CEE plug Used machine overhauled with 6 months warranty

Label book printing machine Labelmen PW180DLU, YOC 1996, 4 colors, punching unit, embossing device, various mounting plates, laminators, UV dryers, dispensers, Slitten rewinders, in good condition, immediately Available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

1 PIMATEX high temperature sample dyeing machine type Draw-Lab 140/5, year 1994, capacity 5 Kg, machine equipped with filter and addition vat, SETEX 505 dye cycle controller, circulation pump controlled per SIEMENS inverter, machine delivered fully erected because electrical panel and pneumatics don't need to be disconnected

Label book printing machine Iwasaki, machine number 1499, 3 colors, 2 colors, punching unit, embossing unit, various mounting plates, laminator, UV dryer, dispenser, slitter rewinder, in good condition, immediately available

2.4 kg batch like new, only 4 x run, airflow, drum speed adjustable, Artisan cropster connection

Used bottling line by Pack-Trend, new 2020. Machine type: Dispensing, capping, labelling machine Weight: 675kg Type of medium: liquid, gel, cream. Material stainless steel AISI304 Machine capacity: up to 900 cycles/hour Packing portion: 0,1-0,5 L Machine dimensions working: Height H - 1600mm Width B - 1500mm Length L - 3000mm. Electrical supply: 230V/50Hz Pneumatic Supply: 6-8 bar Power consumption: 1500W Accessories: ROTARY RECEIVING TABLE ROTARY INFEED TABLE Certification: CE Technical and Operational Documentation.

POWDER COATING LAB HAND GUN WAGNER & GEMA COMPATIBLE, WORKS PERFECTLY WITH THE ORIGINAL CONTROLLER DELIVERY: 100Kv LABO HAND GUN 5m CABLE + COMPATIBLE SOCKET

Frozen in time Ltd Mini Lablyo Freeze dryer 2017, bench top freeze dryer with adjustable temp display, 20cm x 25cm deep ice condenser, chamber with 3kg ice capacity, condenser temp -55'C,

Key data: 190 mm, 450 mm

available Lab Mill! Description attached !

Code: 0284 Brand: MASTERWOOD Model: LABOR B1/V - CE Standard 1-Head vertical chisel mortising machine for wooden frames, doors, solid wood and various - CE Standard Technical data Head motor Hp 3 Head vertical stroke mm 150 (useful mm 110) Head longitudinal stroke mm 285 Head transversal stroke mm 80 Worktable vertical stroke mm 260 Pneumatic workpiece clamping Overall dimensions mm 900 x 900 x 1800 h Weight kg 410

SCM lab 300p 5-speed station wagon Universal multiple combination Aluminium sliding carriage 3 Tesa planer blade shaft Trimming length 1600mm max. saw blade diameter 315mm with scorer swivelling saw blade Dressing width 300mm Dressing table length 1300mm Thickness table dimensions 300 x 450mm Min./Max. Thickness Height: 3/220mm Motor 50Hz 4kW 400V max. milling tool diameter 160mm Spindle speed: 3600/7500/10,000 rpm Spindle diameter: 30mm Weight 430kg G&STÜ-5500314

Vacuum pump LABORTECHNIK ILMENAU 1DS1 Pumping speed: 1 m3/h Ultimate pressure: 0,0,000 08 Torr ( 0.107 mbar ) motor: VEM EWR 71.2/4 ( EWR71.2/4 ) 0.18 kW 1410 rpm 220 V 1AC IP 44 used, tested ! Dimension: 320 x 160 x 210 mm

Aircooled chiller National Lab 67 kW Cooling capacity: 67 kW / 19,1 tons (12/7 — 35°C) Year of manufacture: 2008 Type of refrigerant: R410A Refrigerant circuit: 1 pcs. Compressors: 2 pcs. Sanyo (scroll) Number of fans: 3 pcs. Dimensions: 2.30+0.25x1.33x1.60 m. Weight: 690 kg. Condition: very good

Laboratory mixers, used Volume : 4 ltr. Drive : 1.5 KW --> with infinitely variable speed --> with control cabinet CE declaration of conformity possible

Laboratory mixers, used Volume : 4 ltr. Material : Areas in contact with the product in stainless steel Drive : 1.5 KW

Laboratory mixers, used Volume : 1 ltr. Material : Areas in contact with the product in stainless steel Drive : 0.37 KW

Used SACMI Labeling Machine – OPERA 400 High-performance rotary labeling machine designed for applying plastic wrap-around labels on PET bottles in high-speed beverage production lines. The SACMI OPERA 400 offers reliable labeling performance and is suitable for large-scale bottling operations. General Information - Manufacturer: SACMI - Model: OPERA 400 - Year of Manufacture: 2006 - Machine Direction: Right to Left (R–L) Technical Specifications - Production Capacity: 35,000 bottles per hour - Bottle Plate: 32 - Bottle Size: 0.5 L PET bottle Labeling System - Label Type: Plastic labels - Application: All-around / wrap-around labeling Key Advantages - Reliable SACMI rotary labeling technology - High-speed labeling capacity of up to 35,000 bottles per hour - Suitable for 0.5 L PET bottle formats - Designed for plastic wrap-around labels - Ideal for integra ...

Used SIDEL Labeling Machine – SIDEL ALFA High-speed rotary labeling machine designed for applying plastic wrap-around labels to PET bottles in large-scale beverage production lines. The SIDEL ALFA labeling machine offers reliable performance and is suitable for high-capacity bottling operations. General Information - Manufacturer: SIDEL - Model: SIDEL ALFA - Year of Manufacture: 2001 - Machine Direction: Right to Left (R–L) Technical Specifications - Production Capacity: 45,000 bottles per hour - Bottle Plate: 36 - Bottle Size: 0.5 L PET bottle Labeling System - Label Type: Plastic labels - Application: All-around / wrap-around labeling Key Advantages - Proven SIDEL labeling technology - High-speed production capacity of up to 45,000 bottles per hour - Suitable for 0.5 L PET bottle formats - Designed for plastic wrap-around labeling - Ideal for integratio ...

Type: T 132 M4 7,5 kW 1460 rpm For Labor 255 lathe

Tilting mobile tank Dimensions between wheel arch: 645 mm Tilting height: 560 mm, Volume: 76, Useful volume: 50 L , Pneumatic: 2 bars , Cover diameter: 440 mm, Tank bottom outlet diameter: 36 mm, Mobile tank: Yes, Double envelope: Yes, Dimensions (mm): 850x850 H 1250, Side tapping: 1

Herma automatic labeling machine

Plastic Dryer - Labotek DDM5-120 (2 pcs.) Year of Make: 2011 Description: Dryer with 2 molecular sieves, proportional valve and suction conveyor from the Labotek brand Power: 9 kW Silo capacity: 120 kg Control panel - touch screen The dryer can work with 2 machines together Dryer fully automatic: feeding the material to the silo and conveying to the machine All offered peripherals are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Sample system for filling liquids into bottles, closing them with a twist-off cap and then bottles labelling. Complete system consisting of: Bottle unscrambler | Filling machine with 4 filling heads for liquids with high or low viscosity | Lid closing machine for different sizes and shapes of lids including lid unscrambler | Labelling machine for bottles/cans/containers made of glass or plastic | Collecting table. The individual machines of the packaging line are connected to each other via conveyor belts, which gives the installation of the line high flexibility. -Specifications: Number of filling nozzles: 4 | filling range: 100-1000ml | dosing method: by piston pump | accuracy: +/- 1% | bottle height: 15-400mm | bottle diameter: 25-200mm | speed: max. 1000 bottles/hour | label size: L25-300mm, W20-180mm, product contact parts are made from 304 stainless steel. Dimensions and total weig ...

Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit and a flow wrap unit. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing. The liquid supply system for moistening the wipes consists of 2 tanks with continuously mixing agitators  ...

roll diameter: 200 mm roll length: 400 mm rolls drilled: Peripher Nip adjustment: hydraulisch total power requirement: 2x 5,5 kW Condition: new rolling mill, with CE marking, with 2 year warranty Specification: Monoblock laboratory rolling mill 200 x 400 mm - new - Roller diameter: 200 mm - Roll length: 400 mm - Roll bore: peripherally drilled - Individual drives: variable friction ratio - Roller bearings: roller bearings with manual grease lubrication - Gap adjustment: hydraulic - Gap adjustment: approx. 1 - 20 mm, during normal operation operation - Speed range approx.: 2.5 - 19.5 rpm - New hydraulic unit for roller gap and emergency system emergency system - New Johnson-Fluiten rotary joints - two adjustable guide plates Tecafine PE5 Natural to reduce the working range. - Working range approx.: 100 to 360  ...

roll diameter: 250 mm roll length: 500 mm rolls drilled: peripher Nip adjustment: hydraulisch total power requirement: 2x 5,5 kW Condition: new rolling mill, with CE marking, with 2 year warranty Specification: Monobloc laboratory rolling mill 250 x 500 mm - new - roll diameter: 250 mm - Roll length: 500 mm - Roll bore: peripherally drilled - Single drives: variable friction ratio - Roller bearing: roller bearing with manual grease lubrication - Gap adjustment: hydraulic - new hydraulic unit for roller nip and emergency system - New rotary unions make Johnson-Fluiten - two adjustable guide plates to adjust the working range on the rollers. - Working range approx.: 100 to 460 mm - Roller gap, during the working phase 25 mm - tiltable guide plates made of nylon-polyethylene Material - Stainless steel tank - New saf ...

Manufacturer: P.E. Labellers Model: MASTER M.S. Type: 12T-770/4S-4E Year of Manufacture: 2007 Electrical Specifications: - Voltage: 400 V - Phases: 3 - Current: 11 A - Power: 6 kW - Frequency: 50 Hz Pneumatic Specifications: - Air Consumption: 30 L/min - Air Pressure: 5 bar Weight: 2200 kg CE Certified Y271010885 can manage a bottle height range from 120 to 400 mm - The range of bottle Ø goes from 30 to 120. - For the label length, this machine can apply labels that cover max 180° of the bottle. - The adhesive stations have a size of 200 H. - The machine is predisposed for the mechanical centering via bottom notch. - Max velocity of the machine is 8000 B/H. Find more here - / Contact us at -

Heidolph Laborata 4001 complete with condenser and water bath, 0-270 rpm

CNC lathe Padovani BJ 1996 including the stainless steel tub

CONTROLS   CNC Teach In Controls SIEMENS BASIC FUNCTIONS   design principle: flatbed   number of spindles: 1 WORKING RANGE TURNING   swing diameter (max): 720 mm   turning diameter (max): 380 mm   bar diameter (max): 108 mm   worpiece length max.: 1500 mm MAIN SPINDLE   spindle revolutions (min): 0 /min   spindle revolutions (max): 1200 /min   number of gears: 3   spindle bore diameter: 108 mm X/Z SLIDE   traverse velocity Z (max): 5000 mm/min   traverse velocity X (max): 5000 mm/min   rapid traverse Z: 5000 mm/min   rapid traverse X: 5000 mm/min   tool fixture: Steel Holder TAILSTOCK   distance betw. centers (max): 1500 mm   sleeve stroke: 200 mm   sleeve diameter: 120 mm   taper: MK 6  ...

chamber volume: - liter useable volume: 1,8 liter friction: - motor drive power: 30 kW Condition: used - refurbished Specification: laboratory internal mixer - used - Chamber volume: approx. 1.8 l - Closing system: trap door system - Piston: pneumatic, for filling material - Rotor geometry: interlocking type - Oil seals with pump lubrication - New rotary union for water cooling - New main gearbox - New AC motor: 30 kW - Control cabinet: NEW, with Siemens S7-1200 PLC - Control panel with Siemens KTP 700 Basic touch panel - Cabling: NEW - New Siemens G120 frequency converter for variable speed - New remote maintenance device - Paint finish: according to customer specifications - With safety devices in accordance with applicable standards - Refurbished, with 12-month warranty, CE marking, operating and maintenance instructions in English The data for this ad was cr ...

A high-precision CNC drilling/reference hole machine Mach3 Lab with X-ray vision system is available. Travel X/Y: 700mm/800mm, max. panel dimensions X/Y: 700mm/700mm, min. panel dimensions X/Y: 300mm/200mm, panel thickness range: 0.3mm-6mm, Z-axis stroke: 40mm, spindle speed: 30000rpm, positioning accuracy: +/-0.003mm, transducer resolution: +/-0.001mm, X-ray range X/Y: 700mm/580mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible.

WR FEEDER LABEL 500L, DEMONSTRATION SYSTEM - Technically overhauled and cleaned by the manufacturer!, - Friction feeder with 500 mm product width in the long version, - Encoder kit 1000 pulses, - ALTECH labeler, - Control system for ALTECH, - Automatic delivery with programmable descent, - Stand with H-base on casters, WR FEEDER LABEL is a system for separating and labelling cartons and bags. The encoder enables perfect synchronisation between the removal speed and the output speed of the labels, guaranteeing high accuracy when applying the labels.

General SKU385T1160 LocationBarneveld MakeEsco-Labor TypeEL-10 No.365/1 Year of construction1991 Main Features MaterialStainless steel Volume12.5 Ltr. Motor0.14 KW Specified Features - Processing vessel MaterialStainless steel Closed stirring vesselcheck Capacity±12.5 Ltr. Vessel sizesDia 240x275 mm Flat top sidecheck With covercheck Top connectionsDN 50, 12 mm(2x) Outlet28 mm Half coil jacketedcheck With anchor stirrercheck Motorindur antriebtechnik AG, 0,14 kW, 180 Volt With homogenisercheck Information Mounted on legscheck With switchgearcheck Weight180 kg Floorspace1x0,55 m Total height1,3 m Extra SpecificationsMotor on cover: esco-labor x40/38, factory no: 749, 220 Volt, 1.7kW, 22000rpm Vacuum pump : type N726.3 FT.18, NR:689428, 220 Volt, 0.15 kW Processing vesselsEsco LaborProcessing vessels > Processing vesselsBrand > Esco Labor What you can expect ...

General SKU347W896 LocationBarneveld MakeLibra TypeSensitive 300A Mach.No.300.91.122 Main Features MaterialStainless steel Motor1 KW Specified Features - Miscellaneous MaterialStainless steel CapacityOutput max 300 pc/min Motor1 kW, 220 volt Information Year of construction1991 Total height2,30 m Floor space1,20x1,05 m Weight420 kg Extra SpecificationsLabeling machine, with roll holder. ajustable height travel 10-120 mm. MiscellaneousIMA ItalyMiscellaneous > MiscellaneousBrand > IMA Italy What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU391U1101 LocationBarneveld MakeEsco-Labor TypeEL1 (glas) No.635/1 Year of construction1993 Pressure Vacuum possiblecheck Main Features MaterialGlass Volume1 Ltr. Motor0.75 KW Specified Features - Processing vessel MaterialGlass, Stainless steel Closed stirring vesselcheck Capacity 1 liter Vessel sizesDia. 120 mm x 150 mm Dished bottomcheck Flat top sidecheck Top connectionscheck Outletcheck With jacketcheck With anchor stirrercheck Motor65 W (3500 rpm) Speed mixing shaftmax 540 rpm With homogenisercheck Motor750 W (2800 rpm) Information Mounted on legscheck With switchgearcheck Weight40 kg Floorspace1 x 0,5 m Total height0,75 mProcessing vesselsEsco LaborProcessing vessels > Processing vesselsBrand > Esco Labor What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any  ...

General SKU437W1444 LocationBarneveld MakeSigma Type4K10 No.45753 Year of construction1995 Main Features Motor1.87 KW Specified Features - Miscellaneous Capacity1 kg Miscellaneous Capacity1 kg Motor1.87 kW, 230 volt CapacityMax 13.000 rpm Information Mounted on wheelscheck With switchgearcheck Total height0,93 m Weight80 kg CEcheck Floorspace0,56x0,64 m Extra SpecificationsLab refrigerated centrifuge, with various rotorsMiscellaneousSigmaMiscellaneous > MiscellaneousBrand > Sigma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU437W1435 LocationBarneveld MakeMLS GmbH TypeEthos plus 2 No.124826 Year of constructionunknown Main Features Motor2.5 KW Specified Features - Miscellaneous Motor2,5 kW, 230 volt Information Total height0,75 m Weight80 kg CEcheck Floor space1,0x0,70 m Extra SpecificationsLab microwave solvent Extraction labstation, with multi Prep-p 36 rotor, color control, type Terminal 800, Cryolab cooling moduleMiscellaneousMLSMiscellaneous > MiscellaneousBrand > MLS What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU437W1434 LocationBarneveld MakeMLS GmbH TypeEthos 1600 Mach.No.123 840 Main Features Motor2.5 KW Specified Features - Miscellaneous Motor2,5 kW, 230 volt Information Year of constructionunknown Total height0,75 m CEcheck Floor space1,0x0,70 m Weight80 kg Extra SpecificationsLab microwave for synthesereaction suction cap. 108 m3/h with Lab control terminal, : Alldos vacuum pump MiscellaneousMLSMiscellaneous > MiscellaneousBrand > MLS What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU253X218 LocationBarneveld MakeFryma Koruma TypeDinex H lab No.103554 Year of construction2020 Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume20 Ltr. Motor5.5 KW Specified Features - Processing vessel MaterialStainless steel 1.4435 (316L) Closed stirring vesselcheck Capacity20 l., (12 l.) Vessel sizesDia. 400x300 mm Conical bottomcheck With covercheck Top connectionscheck OutletDN25 With jacketcheck Max. temperature-10°C/+110°C, (165°C) With dissolver stirrercheck Motor220 volt, 8800-33600 rpm With homogenisercheck Motor5,5 kW, 380 volt, 2870 rpm Information With switchgearcheck Total height1,70 m Weight500 kg CEcheck Floorspace1,40x0,90 m Extra SpecificationsWith scraper agitator, 0,37 kW, 1380/50 rpm, : Siemens touchscreen control, type Simatic HMI, Busch vac ...

Lathe LABOR E 300 Brand: LABOR Model: E 300 Year of construction: 1994 Chuck size: 380 mm Center height: 300 mm Maximum turning length: 4000 mm Bed length: 5250 mm Bar capacity (spindle bore): 100 mm Self-centering chuck: Yes Four-jaw chuck: No CE Certification: Yes Overall dimension: 7000 mm x 1500 mm x 1500 mm H Our internal ref. 779

Lathe LABOR E 300 Brand: LABOR Model: E 300 Year of construction: 1997 Chuck size: 370 mm Center height: 300 mm Maximum turning length: 5000 mm Bed length: 6250 mm Bar capacity (spindle bore): 100 mm Self-centering chuck: Yes Four-jaw chuck: No CE Certification: Yes Overall dimension: 8000 mm x 2000 mm x 1500 mm H Our internal ref. 787

Description Labor-E 275 Details Type 275 Year of manufacture 1997 Machine no. 9711848 FAGOR CNC 850T control Tip height above bed 275 mm Center width 3,000 mm Footprint 5,050 x 1,800 x 1,430 mm Circumferential diameter over bed 550 mm Circumferential diameter over carriage 340 mm Spindle nose 8" Spindle bore 103 mm Main spindle motor 11.5 kW Z-axis motor 1.4 kW X-axis motor 0.7 kW Quill feed 220 mm Quill diameter 100 mm incl. documentation SPECIAL PRICE

Labeling machine for top and bottom, with a ZODIAC printer for the top labels.

General SKU293X467 MakeMiele LocationBarneveld CEcheck TypeG7826 Main Features MaterialStainless steel Motor10 KW Specified Features - Miscellaneous MaterialStainless steel Motor10 kW, 400 volt Information No.00/74340434 Year of construction2009 Floor space0,90x0,80 m Total height1,95 m Weight505 kg Extra Specificationsusefull size inside chamber: 600x560x650 mmMiscellaneousMieleMiscellaneous > MiscellaneousBrand > Miele What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

4-speed Kombi Minimax LAB300b, year 2021, very good condition, 3 kWPrice subject to change, errors, printing and typesetting errors excepted

grinding wheel diameter: mm table length: - mm table width: - mm total power requirement: 5,5 kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU409X1231 MakeDrM LocationBarneveld CEcheck TypeTSD 316 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L) Filtercheck (Laboratory Filter) Filter surface0,012 m² Information No.1002561 Year of construction2017 Floor space0,9 x 0,5 m Total height1,65 m Extra SpecificationsTechnical specifications Filtration area: 0.012 m² Filling volume: 0.95 L Max. operating pressure: –1 / +20 barg Max. operating temperature: 250 °C Filter element: Stainless steel candle Gasket materials: FKM / PTFE / FEP Miscellaneous filtersDrM - Dr Müller AGFilters > Miscellaneous filtersBrand > DrM - Dr Müller AG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in  ...