lab mixer used for sale

Spiral mixer Diosna SP 120 D Capacity in dough: 120 Kg  Performance in flour: 75kg  Automatic timer Two timers Two speed settings Reverse Mobile with brake

Spiral mixer Diosna SP 120 D Capacity in dough: 120 Kg  Performance in flour: 75kg  Automatic timer Two timers Two speed settings Reverse Mobile with brake

Spiral mixer Diosna SP 120 D Capacity in dough: 120 Kg  Performance in flour: 75kg  Automatic timer Two timers Two speed settings Reverse Mobile with brake

Spiral mixer Diosna SP 160 D Capacity in dough: 160 Kg  Capacity in flour: 100 kg  Automatic timer Two timers Two speed settings Reverse Mobile with brake

Spiral mixer Kemper SPL 75 Capacity in dough: 120 kg Flour capacity: 75 kg Automatic timer with two clocks Two speed settings Wheel clockwise/counterclockwise rotation Mobile with brake

Spiral mixer Diosna SP 120 D Capacity in dough: 120 Kg  Performance in flour: 75kg  Automatic timer Two timers Two speed settings Reverse Mobile with brake

Spiral mixer Diosna W 240 A Condition: cleaned, serviced and checked Dough capacity: 240 kg Flour capacity: 150 kg Bowl capacity: 370 l Gentle dough kneading at a lower temperature Suitable for all types of dough Scraper with temperature sensor PT100 Digital control Incl. 2 vat wagons

Spiral mixer Diosna SP 120 D Capacity in dough: 120 Kg  Performance in flour: 75kg  Automatic timer Two timers Two speed settings Reverse Mobile with brake

Used Schroder massing machine type MAX 600. Year of manufacture 2002. Acid-resistant design.

Voltage 380 V, power 6 kW, capacity up to 120 kg, incl. 2x mobile boilers with diameter 800 mm (overall dimensions 920x840x810 mm) Auction-ID: A7-45702-1

Equipped with: electric motor, emergency stop, power connection (380V) Auction-ID: A1-40134-321

General SKU200W006 MakeHPV TypeRV Base SO No.2002-M-1 Year of construction2013 LocationBarneveld Main Features MaterialStainless steel Motor7.5 KW Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 75x15 mm Inletdia. 40 mm OutletDia. 30 mm Number of stages:2 Capacity2500l/h Max. temperature160°C With mechanical sealcheck Motor7,5 kw, 400V, (EX) With frequency controllercheck Rotor speed6000 rpm With vesselcheck Capacity2x 600l Vessel sizesDIa. 790x1400 mm MaterialStainless steel 1.4404 (316L) Inline high shear mixers Capacity0,6m³/h With motor1,5kW, 400V, 720rpm (EX) 2x With frequency invertercheck Information With switchgearcheck (as is) Floorspace4,0x3,0 m Total height2.5 Extra SpecificationsSkid mounted stainless steel RV base SO. with: IKA, type Dispax-reactor DR2000/5-ATEX, year 2013, motor 7,5kw, 400V, EX. Nirosta vertical ...

30978-0181. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-26

Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-147

S/N:PM20VPB913258. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-41

Missing front wheels Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-146

BOLDT BFMA double-shaft paddle mixer – 220 L – stainless steel – year of manufacture 2007, Industrial double-shaft mixer with 2 rotation directions and front discharge, ---------------------------------------------------------------, Machine description, For sale is a BOLDT BFMA double-shaft paddle mixer from the year of construction 2007 in Stainless steel version., The machine is ideally suited for homogeneous mixing of:, - powder, - Granules, - spice blends, - Paste products, - Food and non-food products, The counter-rotating mixing shafts achieve a particularly even and gentle mixing., ---------------------------------------------------------------, ⚙️ Technical Data, - Manufacturer: BOLDT, - Type: BFMA, - Year of manufacture: 2007, - Gross content: 220 liters, - Net weight: 170 liters, - Material: completely stainless steel, - Discharge: 2 Frontentleerungsventile, - Mixin ...

NiroTech RX200 Twin shaft paddle mixer Serial: 3052022 2022, Stainless, twin shaft paddle mixer, variable speed, forward and reverse, guarded lid, manual discharge door, 3Ph

2-Shaft Mixer; with tilt function; Lining and kneading wings are made of stainless steel, 2-Z-shaped kneading blades; Length 2.90 m, width 1.30 m, height 2.10 m, trough size 64 x 69 x 55 mm Engine type ZG4 KMR 132 S4; Motor power: 7.5 kW; Motor voltage: 380/ 660 V; Rated speed motor: 1435 ... 1480 rpm; Output speed (gearbox): 160 rpm. The plant was shut down in 2024. more photos on request

CFS Slagelse A/S cooled double shaft paddle mixer on weighing cells, type: UNIMIX I 2500, machine number: 5000068163 POS 26, year of construction: 2011, 400 V, 3 Ph, 50 Hz, 41.2 A, 22 kW, CO2 injection, volume: 2500 liter, dimensions: 4600 mm x 2200 mm x 3500 mm.

Nesto double shaft paddle mixer, type: MIX MAXI-200, serial number: 2014, year of construction: 2024, 400 V, 3 Ph, 50 Hz, weight: 300 kg, volume: 200 liter, dimensions: 1450 mm x 700 mm x 1500 mm. Never used.

Wolfking double shaft paddle mixer, type: TSM 400L, number: 56065, year of construction: 09/1993, 380 V, 3 Ph, 50 Hz, 20 A, 8 kW, volume: 400 liter, dimensions: 2000 mm x 1650 mm x 2700 mm.

Hiwell mobile batter mixer, type: DJJ100, serial number: 1312559, year of construction: 2025, 3 x 380 V, 50 Hz, 3 kW, volume: 200 liter, Dgedong SCP-10422 vane pump, weight: 200 kg, dimensions: 1300 mm x 900 mm x 1800 mm. Never used.

Seydelmann cooled vacuum double shaft paddle mixer with Oslos lifter for pallet boxes, type: PV 4000, machine number: 11422-1, year of construction: 2011, 400 V, 50 Hz, 125 A, 60 kW, weight: 6500 kg, dimensions: 4250 mm x 2300 mm x 2750 mm. Oslos lifter, type: Column Loader 1000S, serial number: E011270705118/9001, year of construction: 09/2021, 380 V, 3 Ph, 50 Hz, 5.2 A, 2.2 kW, capacity: 1000 kg, dimensions lifter: 700 mm x 2600 mm x 4200 mm, dimensions lifting arm: 1750 mm x 1600 mm x 1250 mm.

Nesto double shaft paddle mixer with lifter for 200 liter meat bins, type: MIX MAXI-450, serial number: 1030, year of construction: 2026, 400 V, 3 Ph, 4 kW, weight: 620 kg, volume: 450 liter, total dimensions: 2000 mm x 610 mm x 470 mm. Never used.

Ekomex double paddle vacuum mixer with lifter for 200 liter meat bins, type: ML-1000V, serial number: 14040801, year of construction: 2018, 3 x 400 V, 50 Hz, 9 kW, Busch vacuum pump, type: KB 0040 D 100, serial number: D16410645, year of construction: 2016, volume: 48 m³ per hour, total dimensions: 2400 mm x 2100 mm x 2700 mm.

CFS double shaft paddle mixer on weighing cells with switch cabinet, type: UNIMIX 1500L, serial number: 62267, year of construction: 2002, 3 x 400 V, 50 Hz, 11 kW, volume: 1500 liter, infeed height: 1850 mm, outfeed: 800 mm (double meat bin), Flintec SB4-20kN GP-s weighing cells with Bizerba indicator, dimensions mixer: 2600 mm x 1700 mm x 2300 mm.

Equipped with 2 vertical mixing augers; each mortar equipped with 7 knives; 3 dosing slides; weighing device; Auction-ID: A1-40135-236

Range of mixer taps + waste fittings Hansa, 18 mixer taps, cardboard box with connector + rosettes, waste fittings + plugs Auction-ID: A7-45960-32

Overview This premix beverage mixer was manufactured in 1969 by Stork Jansen & Sutorius N.V. The machine is designed for the production of carbonated and non-carbonated soft drinks as well as carbonated water. It is configured as a multi-tank mixing and carbonation system including product tank, vacuum tank and saturator for consistent mixing and CO₂ dosing. The unit has been fully refurbished in 2020, is currently in operation, and available for inspection. Technical data Capacity: approx. 15,000 L/h Application: Beverage mixing (carbonated and non-carbonated soft drinks, carbonated water) Configuration: Multi-tank system (product tank, vacuum tank, saturator) Operating pressure: up to approx. 6 bar (typical 1.2 – 1.4 bar) CO₂ content: approx. 6.5 – 7 g/l Electrical: 380 V, 3-phase Drive power: approx. 5.5 – 7.5 kW Scope of Delivery  Premix beverage mixer | Stork J ...

Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters., Additional title: Intermix system with carbonisation unit, Water output: 22575 l/h, Fruit juice output: 4907 l/h, Operation / Control: Control panel, manual, Material: Lacquered mild steel frame, stainless steel product contacts, Position: Free standing, Base construction: Open frame construction with spherical feet, Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet

Additional title: in various designs

R22104/17 AMC Label Punch Model: NC 110 LCD Built: 1998 Availability: instantly Punching surface 750 x 1100 mm Punch size: max. 280 x 280 mm Min. 10 x 10 mm max. punching pressure 10,000 kg Stacking height 0-25 mm Available: immediately

6-Colors R25476/17 ALLIED GEAR Labels Flexographic Printing Machine Model: Flexomaster Built: 1995 Availability: instantly 6 colors 6 Anilox rollers Paper cutters Lamination Transporter Power unit UV dryer Video body plate (JM Heaford) Still in operation: Yes Available: by arrangement

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

4-color R23240/17 SHIKI label press Model: PC 45 M Built: 1992 Web width: 280 mm Availability: instantly 3 - coloured or 4 - coloured (optional) Printing width: 270 mm, min. 50 mm max. feed: 7, approx. 180 mm Accessories: Rolling unit for rollers up to 100 cm in diameter Winding unit for small rolls pneumatic remaline hole on both sides Speed: 7000 cycles/h max. Products: Hole edge adhesive labels, adhesive labels, hole edge cardboard labels, tickets with and without printing - can punch, print, embosse, number, perforate, punch Available: immediately

8-colours web width 342.6 mm 9 printing stations, 8 for watercolours straight toothed 1 UV (glue) station redeveloped and further expanded for printing on packaging monofilm from 30" expanded and further expanded for printing on adhesive label material up to 200 Ceramic anilox cylinder, for 120/18 to 140/10 140/17, 160/15, 180/12, 95/15, 200/5, 255/10, 300/10, 315/11, 345/8, 500/17 Colouring roller for full-surface colouring Cutting device for longitudinal sections Etc. Still in operation: Yes Available: immediately

manual roll gap adjustment 2x7.5 kW motor Bearing Oil circulation lubrication adjustable roller speed 10-41 rpm BJ 1990

Semiautomatic Etikettierer fair model - Hence, as good as new state Bj.2012 donation possibilities: 1 label: 2 etiquettes: Orients: Straightened in the bundle other infos on inquiry

used Palettenetikettierung

Drive: 4 KW

; ready for operation

The SERVOCUT 302 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machine  ...

Tray labels

Laboratory press with 11 vertically arranged casting plates (each 260 mm x 250 mm), with hydraulic pump and motor 0.5 kW, oil reservoir, drain tray and drain valve. Tower can be moved forward; Cloths should be renewed.

Etikettierer (semiautomaton) to application of round etiquettes 230 V of connection / air pressure inevitably an easy service / quick arrangement this Etikettierer is suitable especially for smaller production loose dimensions. further information on inquiry

Laboratory Candy pulling machine Application Sugar Pulling, Available 1 Kg, 2Kg & 5 Kg up to 50 Kg, the size of the engine is dependent on the size of the machine The action of the machine is derived from two driven arms rotating independently around a single fixed arm. The machine has one speed and pulling time can be set by means of a timer. The teflon arms are removable. This option is unique to this machine. It allows an easy cleaning. Safety guard automatic stopping with motor and starter Sugar Pulling Machine is mainly to aerated products like Chewy Toffees and others. This machine just stretch the gelatine based sugar mass and work air inside the batch. That avoid stickiness of the chewy Toffee at the teeth and give the product a spongee texture. The Machine is made for Laboratory trials and works batchwise, the product touching parts are made from stainless steel or te ...

Etikettierer (semiautomaton) to application of etiquettes on all angular bundles and especially for the Nachlabeln of tubes suitably 230 V of connection / air pressure inevitably an easy service / quick arrangement this Etikettierer is suitable especially for smaller production loose dimensions. further information on inquiry