127,909 used machines on RESALE, but how to find them? Machine Search
DISPERMAT H-drive Type: 4V30M Power: 0.37 kW Speed: 1400 rpm freely adjustable adjustable even in standstill Life-long lubrication
VAKONA energy-saving cooling tumbler ESK 850 STL-B Year of Make: 2017 Equipment: – Container, machine cabinet and frame made entirely of stainless steel – Machine fixed – Touch screen control for operation in manual and automatic operation – Storage space for up to 99 recipes with freely programmable parameters: total, working and break time, rotation speed, Temperature, vacuum height, ventilation intervals, container position and container swivel operation – Rotational speed of the arm infinitely variable from 3-18 rpm – Direct cooling system with powerful cooling unit, heat exchanger in double-jacketed tank made entirely of stainless steel – Vacuum system including high-performance vacuum pump, fully automatic, programmable ventilation cycles, – sterile filters for disinfection of ventilation air, hygienic automatic water separator – electric infinitely ...
Double Z Kneader / Sigma Kneader / Shovel Kneader / Trough Kneader Linden Suitable for highly viscous, tough, plastic or sticky materials such as adhesives, sealants or pastes. Thanks to their two interlocking Z-shaped kneading arms, they can process substances that are hardly homogenizable with normal mixers. - Make HermannLinden, built in 1965 - Machine type K II 60, factory no. 605 - Refurbished in 2025, electrical equipment completely new - Frequency-controlled electric motor 4.0 KW - Frequency converter Optidrive E3 IP66 Outdoor with main switch, potentiometer and reversal of the direction of rotation - Control box with main switch, emergency stop and undervoltage tripping - Speed from approx. 15 to 60 rpm. - Belt drive - 2 Z-waves - All parts in contact with the product in copper and stainless steel - Single-walled copper container approx. 600 x 600 x 450 mm = appr ...
GK90E Mixer Manufacturer : Harburg Freudenberger Maschinenbau Machine type : Internal mixer Model number : GK 90 E Year of construction : 1987 Chamber volume : 90L Standard rotor speed: 10-50 1/min. Rated motor power : 440KW. Main drive 1850 A Rotor geometry : PES-5 Machine parts : Baseplate Mixer Body Feeding hopper Pneumatics system Gearbox KWE Couplings ESCO Gear CST 220 Complete with motor Main drive Leroy Somer Hydraulic unit Gearbox Lubrication unit Dust seals Lubrication unit Grease pump PLC Advise 2.0 (control cabinet) without server
Homogenizing Mixer Manufacturer: Becomix Type RW 30 CD Used Becomix process tank model RW30CD made of stainless steel. Approximate working volume 2-25 liters (depending on product). The unit features a clamped, domed lid and a tapered welded bottom. The interior is designed for a maximum allowable operating overpressure of 2 bar (29 psi) at 133°C (273°F) and a maximum allowable external pressure of 1 bar vacuum (15 psi FV) at 5/133°C (41/273°F). The metal's minimum design temperature is 5°C (41°F) at 2 bar (29 psi). The outer stainless steel jacket is designed for a maximum operating pressure of 4 bar (58 psi) at 5°C (41°F) to 152°C (306°F). The unit is equipped with a top-mounted mixer with electric drive/gearbox and a floor-side homogenizer with electric drive. Mounted in a wheeled stainless steel frame. Room I Room II max./min. pressure PS 1/-1 4 max./min. temperat ...
Planetary stirrer stirrer Model: PL 10 mature technology ... already proven many times! Easy manual operation 3 gear gears 1 stainless steel boiler 10 litres 1 flat stirrer 1 kneading hook 1 bhisend Boiler protective grille / intervention protection Table machine with boiler stroke Connection 220V, 550 watts DGUV V3-tested TOP quality and price in one machine! NEW Machine Visit us at the Milbrandt Outlet with show backroom and a wide selection of machines and equipment!
Homogenizing Mixer Manufacturer: Becomix Type RW 30 CD Used Becomix process tank model RW30CD made of stainless steel. Approximate working volume 2-25 liters (depending on product). The unit features a clamped, domed lid and a tapered welded bottom. The interior is designed for a maximum allowable operating overpressure of 2 bar (29 psi) at 133°C (273°F) and a maximum allowable external pressure of 1 bar vacuum (15 psi FV) at 5/133°C (41/273°F). The metal's minimum design temperature is 5°C (41°F) at 2 bar (29 psi). The outer stainless steel jacket is designed for a maximum operating pressure of 4 bar (58 psi) at 5°C (41°F) to 152°C (306°F). The unit is equipped with a top-mounted mixer with electric drive/gearbox and a floor-side homogenizer with electric drive. Mounted in a wheeled stainless steel frame. Room I Room II max./min. pressure PS 1/-1 4 max./min. temperat ...
Planetary stirrer stirrer Model: PL 20 mature technology ... already proven many times! Easy manual operation 3 gear gears 1 stainless steel boiler 20 litres 1 flat stirrer 1 kneading hook 1 bhisend Boiler protective grille / intervention protection Table machine with boiler stroke Connection 220V, 1100 Watts DGUV V3-tested TOP quality and price in one machine! NEW Machine Visit our Milbrandt Outlet with show backroom and many machines and equipment!
Vacuum processing plant Manufacturer: Fryma Type: Delmix MZM VK-7 Y.O.M.: 1994 Machine No.: M16397 Pressure inside: -1 bar Batch: 7 l for food, cosmetics, pharmaceuticals in sound condition Mobile Dimensions LWH: 900 x 800 x 1350 mm Weight: approx. 120 kg
Agitator used Manufacturer: unknown Type: unknown Diameter approx. 900 mm Immersion depth approx. 1000 mm Engine: Figure M3AA 180 L 6 15 kW 970 rpm 380 / 660 V Dimensions: 2400 x 1200 x 1900 mm
Automatic powder dispersing system in EEx protection Make: Pierre Guerin Type: Blending System SM 20 Y.O.M.: 1994 Power: 2.5 kW Plant number: 4461 - 4450 Pump supply and output electro-pneumatic valves as good as new on mobile tub bowl Dimensions LWH: 1500 x 1100 x 1150 mm Weight: approx. 700 kg
Universal mixer Volume: 400 ltr. Material : areas in stainless steel that are in contact with the product; Main drive: 18 / 22 KW, 1500 - 3000 rpm; Bucket speed: 70 - 140 rpm; 1 x knife head, Knife head motor: 3/4 KW, 1500 - 3000 rpm; Operating pressure: 4 - 6 kg / cm2, max. Pressure: 10 kg / cm2. --> With base; --> 2 identical mixers in stock.
wet mixer, batch mixer, liquid mixer, chemical mixer, drum mixer -Manufacturer: KWH VEB, wet mixer with ceramic drum -Type: 2841.5.7521 -Drum capacity: 100 liters -Drum speed: 38 rpm -Motor: 1.1 kW -Dimensions total: 1520/670/H930 mm -Weight: 487 kg
Laboratory processing plant UNIMIX Manufacturer: Haagen & Rinau Factory no.: 865 3779 Built: 1979 Permissible operating overpressure: container: 4 bar, tube side: 6 bar Total content: 5.5 l Usable volume: 3 l with speed-controlled agitator with speed-controlled homogenizer integrated heating Vertical stroke (water hydraulics) with temperature regulatioin with control system LWH: 750 x 360 x 850 mm
Powder dispersing plant Manufacturer: Fristam Type: PE 0320 f Serial number: 0972600002-227933 Built: 2016 Power: 7.5 kW Weight: 160 kg Flow rate: 15-20 m3/h at height=5 m (water) with switchgear, FU speed-controlled Siemens control, connected in the bypass Vessel volume: approx. 450 l Machine in top-notch condition Dimensions LWH: 2100 x 1200 x 1800 mm Total weight: approx. 300 kg
Laboratory mixer Manufacturer: IKA Type: RE 166 A N°: 489272 max. 6000 rpm, min. 50 rpm 190 volts speed-controlled, with control very good condition LWH: 450 x 410 x 760 mm
RGB Link VSP 5360 Graphics Mixer Auction-ID: A1-44225-257
Ultra-Turrax Manufacturer: IKA N°: 0185 Power: max. 15 kW 380 volts max. 1476 rpm good condition LWH: 2750 x 500 x 550 mm
Ultra-Turrax Year built: 1983 Diameter: 220 mm Power: 13.5 kW 380/660 Volt 1460 rpm Wavelength: 1100 mm good condition LWH: 1700 x 400 x 350 mm
Laboratory three-roller Manufacturer: Otto Hermann (Hamburg) N°: 4023 Power: 0.1 kW 220 volts Roll width: 150 mm Ceramic LWH: 340 x 250 x 250 mm
Spiral mixer for 50 kg dough or other masses, ERKA, type: SR 35 -In good condition- - Reinforced spiral arm - 2 Time clocks - 2 speeds - Emergency stop - Stainless steel dust cover - Kneader runs with AUTOMATIC and also in manual mode - Boiler and spiral made of stainless steel and in very good condition (no signs of use) - New, long connection cable attached - Electronics in very good condition, everything has been checked Kettle: for 30 kg flour or 50 kg dough El. Connection: 50 Hz, 380 V, 3.0 kW, 6.9 A Engine speeds: 710 and 1,425 rpm. The machine is in very good condition and is ready for immediate use. Visits and test runs are possible.
Colour mixer Busch FM 5; good condition; cleaned and tested; Capacity max. 5kg; adjustable up and down movement. Ink Mixer Busch FM 5; good condition; cleaned and checked; max.capacity 5kg; up and dowm movement of thje ink.
Vacuum Mixer/Dryer/Inclined Bucket Mixer Manufacturer: Drais Type TR 50 EX protected with chopper The mixing plant was opened in November 2008 Renewed by the Lödige company. Material stainless steel 1.4571 / stainless steel 1.4571 Electr. Connected load Drive Vibrator 10.5 kW Adjustable, 31.5 – 380 rpm 1445/2905 rpm Product room printing Product room Temp. Product space Content Double coat Double Jacket Content With head capacitor, Double-acting mechanical seal -1/+6 bar 300 °C 56.5 liters 6 bar 7 litres With head capacitor, Double-acting mechanical seal Weight approx. 2000 kg Length x width x height approx. 2200 mm x 1620 mm x 2065 mm Machine is in good condition ! From plant extraction, pilot plant equipment Installation and operating instructions, as well as electrical diagram and drawings available.
High Speed Mixer Manufacturer: GEA Aeromatic Fielder Type PMA 65 Year of manufacture 2004 Serial number 00208.1310 Very good condition High-speed GMP grade mixer granules 316 stainless steel with mirror polished finish for all product contact surfaces. The capacity of the mixing tank is about 65 liters, the minimum product content is 25 kg, depending on the product density. Rotor speed 1 45-450 rpm Speed rotor 2 1500-3000 rpm Choppers The mixing tank lid has a filter housing and an inflatable seal that is automatically activated. The machine has a rinsing system for the bowl and the seals. The mixing bowl has an external stainless steel heater / cooling jacket with 2 bar/80c max, 7 liters/min.
Planetary stirrer Varimixer Bear R-N 30 Used Varimixer Bear Planetary Stirrer Model N-N 30. It is functional and ready for immediate use. The accessories are included. - 30 litres boiler - incl. whisk, flat stirrer and kneading hook - Protective grille - with a boiler - analog control -Woschow & Co Denmark -Bearmixer
Plough-charmed PSM 300 / 1 MK Material : Stainless steel Main drive: 7.5 KW Volume: 300 ltr.; Demonstration machine, 5 - 6 operating hours; --> food suitable. --> mixer available at short notice, price VHB. Facilities: - Mixing plant: ploughshares, - 1 knife head, drive: 4 KW; - Sack shakes, material: stainless steel; - Sack container buckle: at the outlet with manually operated rotary flap; - outlet height of the bagging device: 980 mm; - air flushing on the shaft passages; - Stainless steel control cabinet, fully wired -- > ready for operation; - Machine frame with pallet space, made entirely of stainless steel;
For smaller containers instead of tripod agitators: Agitator REITZ RW0251440200 with 0.25 KW / 1440 rpm and inclined blade stirrer With traverse made of aluminium profiles 45 45 mm. Electric motor: 3 x 230/400 volts, 50 Hz, 0.72 A current, 0.25 kW, 1.66 Nm torque, n = 1440 rpm, IP69K, shaft 20 x 40mm, weight approx. 10 kg. Motor protection socket with switch. Shaft: precision stainless steel shaft D20, length 500 mm, diameter 20 mm, Material stainless steel 1.4571 Coupling: Rigid clutch, bare, material stainless steel 1.4571 Stirrer: Two-wing welded inclined blade stirrer, diameter 200mm, material stainless steel 1.4571
Homogeneisive for renting Key figures: • Becomix RW60 CD + Feed container 50L • Working volume: 60L and 50L • Anchor agitator with scrapers and power breakers • Homogenizer with right/left barrel (homogenizing/pumping mode) • Circulation line • CIP • Lid hydraulically liftable • Fully automatic, control via touch display • Heating, cooling, vacuum, ... • New seals • Pharmaceutical version, but can also be used in cosmetics The machine is fully serviced and is available for rent. We take care of your project "Turn Key" incl. installation at your company as well as commissioning.
Type Barmix 300 New! complete stainless steel 2 speeds (20 and 40 revolutions per minute) 2 rotation directions 3.3 / 4.4 kw fold-up inspection stairs Safety lid Emptying forward via an emptying flap with CE marking Outer dimensions (L x W x H) : 1,750 x 950 x 1,650 mm (open lid: H: 2,100) Loading height ± 1,350 mm Dimensions Drum (L x W x H) : ± 860 x 670 x 565 mm
Stock # U2347-3 Used mixer by Netzsch (DE) type VPI 550 with butterfly/tri-foil agitator. Mixer has contact parts designed in stainless steel. Shaft has a working length 650 mm and is equipped with butterfly agitator, with three paddles and external diameter 1080 mm. Agitator is diven by el. motor 48 kW and is hydraulically risen up to about 130 cm. Machine is equipped with local control pane and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Mixing pan is not included.
Jet-flow agitator Manufacturer: IKA Type: RT 220 KT N°: 0335 in EEx protection Power: 7.5 kW 380 V, 50 Hz 1450 rpm Built: 1995 (?) LWH: 1800 x 350 x 450 mm Weight: approx. 200 kg
Laboratory processing plant (universal machine) Manufacturer: Stephan Type: UMC 12-F No.: 712.673.01 Built: 1986 Power: 1.8 kW 380 V, 50 Hz 150-2800 rpm speed-controlled with double jacket, sight glasses with new control cabinet very good condition on request: with small vacuum pump LBH system: 500 x 400 x 640 mm LBH control cabinet: 600 x 600 x 220 mm LBH pump: 270 x 220 x 210 mm
Homogenizing Mixer Manufacturer: Ekato Unimix Type SRT 50 Order# 4808/2, Series# 70888. Description • GMP compliant • EKATO PARAVISC agitator with EKATO UNIMIX scraper system Power 3 Kw, 5.2 Kw at 87 Hz Speed 21-121 rpm • Patented homogenizer EKATO UNIMIX S-JET, located at the lowest point of the container, for internal and external homogenization Power 5.5 kW, 9.5 Kw at 87 Hz Speed 1,000 – 4,800 rpm • Lid lifting device can be swivelled • Integrated CIP cleaning system • Integrated heating/cooling system Electric heating 12 Kw Control Siemens S7 with OP 17 Pressure and vacuum resistant with integrated vacuum system Product space: Capacity 85 litres / 50 l usable volume, Pressure -1/2 bar, Temperature 10/152 °C, Thermal system / double jacket: Capacity 11 l Pressure -1/+4 bar, Temperature 10/152 °C, Complete documentation in ...
maximum number of results exceeded
please refine your search
100 € 
