la used for sale

Batch of LABOD thyristor controllers / control modules Auction-ID: A1-46070-142

MTK+, ISB, HIWIN - Batch of industrial bearings and linear components Auction-ID: A1-46070-234

SKF, FAG, NSK - Batch of industrial bearings and mechanical components Condition: unused Auction-ID: A1-46070-241

Technical data Manufacturer: WEILER Model: Commodor B Machine Type: Lead and Pull Spindle Lathe Turning diameter over bed: 380 mm Turning diameter over slide: 190 mm Center width: 750 / 1000 mm Spindle bore: approx. 56 mm Spindle speed: 25 – 2000 rpm Connected load: 4 kW Voltage: 380 V Weight: approx. 1300 – 1500 kg Configuration Lead and pull spindle Tapping function (metric / inch) 3-jaw chuck Additional chuck Multifix tool holder Tailstock Coolant Setup Chip tray Note Technical data was taken from the nameplate and machine documentation. Specifications may vary depending on the version. Auction-ID: A1-46315-52

Restoration project – Lamborghini Espada S2 (1972) A lot corresponding to the classic Lamborghini Espada S2 vehicle is offered, consisting of a restored chassis and various body elements. The chassis has been restored , which forms a solid basis for the rebuilding of the vehicle. The rest of the components are in a used and partially incomplete state, as shown in the photographs. Important note: The engine is not included in this lot. This is an excellent opportunity for collectors or professionals in the classic vehicle sector, aimed at a complete restoration project or use as a source of parts. Status: Material used. Chassis restored. Other components unverified. Possible incompleteness. Additional Information: Untested operating conditions. On-site inspection is recommended. Terms of Sale: Sold in the \"as is\" condition, without warranty or claim.  ...

SKF, NSK, Koyo, FAG - Large batch of mixed bearings 213KG Auction-ID: A1-46070-338

SICK - Batch of PLS101-112 safety laser scanners (30 pieces) Auction-ID: A1-46070-145

1x 23072-E1A-K-MB1 FAG 1x 23160-B-K-MB-C3 FAG 2x 24144-E1-C3 FAG Auction-ID: A1-46070-54

Overview  The labeler was manufactured in 2004 by the German manufacturer Krones. The machine was regularly maintained and is still installed in a bottling line. As the selling mineral water company is not using the whole bottling line any more, they are selling the used machines, which are still in good shape. Tech. Details  Output: 16,000 - 20,000 bph Formats:  0,25 l Vichy bottle 0,5l Set 1 0,5l Set 2 0,5l Set 3 0,7l GDB 0,75l Set 1 Pitch circle: 720 mm Number of plates: 15 Number of labelling stations: 2 Rotation: counter clockwise Glue pumps included Checkmat label inspection for label presence Date coder included Stainless steel glue roller infeed and output direction in line

Machine was never installed in the system. Was to be explained in Brauschule. Very good condition like new

WEILER LZ330 / From educational institution incl. new 3-axis digital display -Turning diameter over bed 330mm -Turning diameter over support 165mm -Turning length 800mm -Speed range 25 - 2800 rpm -Automatic / longitudinal plan feeds -Multifix with 3x inserts -Drive power 3KW -Three-jaw chuck -Collet device with 20x collets -Copying device -Miscellaneous Accessories -Documentation Dimensions: LxWxH 1.8x0.7x1.6 meters / Weight 750Kg

Overview This self-adhesive labelling machine was manufactured in 2000 by Germany KRONES. The Autocol 1200-20 TA is designed for the application of self-adhesive labels on bottles. The machine is configured with three labelling stations (front, back, and neck/seal label) and includes a Taxomat label feed system. It is suitable for standard beverage packaging applications and is equipped with an integrated Checkmat inspection system for quality control. The machine is currently still installed and will be available from February 2027. The unit is described as used and maintained based on operational requirements. Technical data Capacity: up to approx. 15,000 bph Formats: 0.5 L – 1.0 L (15 formats) Application: Self-adhesive labelling of bottles Configuration: 3 labelling stations (front / back / neck/seal) Label positions: Front, back, neck/seal Incl. Inspection syst ...

turning diameter: 120 mm turning length: 640 mm control: Fanuc 32iT total power requirement: 45 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 254 mm spindle passage: 20 mm turning length: 120 mm Control: TX8i-s total power requirement: 40 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Labelling Machine for glass bottles Krones Robusta 10000 bph Good condition, mechanical labelling machine for pre-cut paper labels with cold clue. It has two label stations, one with two label feeding trays and another with one feeding tray for front, back and neck labels. The carousel is rotated with variator driven electric motor and bottle tables have a belt drive. The labeller was built in year 1995, profoundly overhauled in 2016 and operated since overhaul only approx. 100 hours and thus in very good condition. Delivery includes labeller and approx. 1.5 meter in feeding and out feeding belt conveyors Technical characteristics Manufacturer: Krones AG Machine type: Robusta 600-10-4-4-180 Capacity: 10’000 bph Label type: Pre-cut paper with cold glue Number of bottle tables: 10 Number of labelling stations: 2 Labels on glass bottles: front, back and neck Manufac ...

\" Lot of approx. 300 kg of turning steels – mixed lot for lathes An extensive lot of turning steels for machine tools is for sale. Inventory according to visual inspection: • External turning steels • Internal turning steels / boring rods • Parting steels • Shaped steels • Partly equipped with carbide • Partly with indexable insert holders Different dimensions and designs. Sale exclusively as a total item. Total weight: approx. 300 kg Material: tool steel / partly carbide tipped Design: various shaft sizes and lengths \" Auction-ID: A7-46417-369

Batch of two four-jaw lathe chucks for independent workpiece clamping. The chucks come from the manufacturers WMW and ROTO RECORD and are ideal for eccentric, asymmetrical or irregular clamping on lathes. Technical data:     •    Type: Four-jaw lathe chuck, independently adjustable     •    Included: &nbs p;   •    1× WMW DH 130×4-II, Ø130 mm     •    1× ROTO RECORD DH 160×4-II, Ø160 mm Auction-ID: A7-46417-114

Stock 17 multilayer rolls of 50 m each. - - 80 x 160 x H135 cm Auction-ID: A7-46421-2

\" Workbench / laboratory bench 1100 × 500 × 750 mm – with 4 drawers – without contents Workbench or laboratory bench in solid design. Robust worktop • Right side with 4 metal drawers • Left side open (legroom / device storage) • Sheet steel body • Powder-coated surface Dimensions (approx.): Width: 1,100 mm Depth: 500 mm Height: 750 mm \" Auction-ID: A7-46417-305

\" Extensive tool batch with end mills, mainly keyway milling cutters / profile milling cutters, in various diameters, cutting lengths and designs. The tools are mainly HSS, some with different tooth geometries. The lot consists of over 50 individual tools. • Tool type: End mill / keyway cutter • Material: predominantly HSS • Diameter & lengths: mixed • Shank shapes: cylindrical • Manufacturer: mixed / partially marked • Condition: used • Quantity: 50+ pieces Weight: • Net weight total: approx. 26 kg \" Auction-ID: A7-46417-178

Working hours laser on: 50921 h Working hours beam on: 21717 h Laser power: 3200 Watt Working range laser: 4000 x 2000 x 115 mm Max. steel: 20 mm Max. stainless steel: 12 mm Max. aluminium: 8 mm Length: 11600 mm Width: 5300 mm Height: 2200 mm Machine weight: 16000 kg Electrical connected load: 73 kVA

3× TOS 3-jaw lathe chuck (Ø80 / 100/ 160 mm)Lot of three 3-jaw spiral chucks from the manufacturer TOS. Condition:     •    used     •    traces of wear     due to age and use •    only complete as an item     •    manufacturer: TOS     •    type: 3-jaw spiral chuck, self-centering     •    Jaws: hard jaws     •    Included sizes:     •    Ø80 mm – IU 80 M1 –     •    Ø100 mm – 100/3-2 M1 – max. 5,300 min⁻¹     •    Ø160 mm – IU 160 M1 – max. 3,500 min� ...

\" Conventional lead and tension spindle lathe – turning length approx. 1,200 mm – Ø 475 mm Chuck lead and tension spindle lathe made by Boehringer Bros. (VDF), industrial version. Equipment: • 3-jaw chuck Ø 475 mm • Tailstock • Rotating center punch • Extensive accessories in the side cabinet (jaws, holders, inserts, etc.) • Coolant device • Controls on the support Turning length approx. 1,200 mm.Condition: Used machine with age-related signs of use. Visually appropriate to the age. Manufacturer: Gebr. Boehringer GmbH Type: Lead and pull spindle lathe Turning length: approx. 1,200 mm Chuck diameter: Ø 475 mm Spindle bore: approx. 80 mm • Dimensions in mm (LxWxH) approx. 3,450 x 1,300 x 1,700 mm \" Auction-ID: A7-46417-373

\" Lots of diamond & CBN grinding wheels – LACH DIAMANT / Molemab / BDW-BINKA – Tool grinding shop stock , extensive batch of diamond and CBN grinding wheels from the stock of a tool grinding shop for machining carbide tools. The stock comes from ongoing workshop operations and includes: • new, originally packaged grinding wheels • partly already used or opened discs Included are various designs such as: • profile wheels • cup wheels • circumferential grinding wheels • cutting discs Manufacturers include: • LACH DIAMANT • Molemab • BDW-BINKA Diamantwerkzeug GmbH Ideal for: • Tool making • Regrinding companies • Tungsten carbide processing • Resale is carried out exclusively as a complete lot.\" Auction-ID: A7-46417-354

\" Lot of casting ladles / metal ladles – approx. 500 kg – 4 pieces of batch consisting of 4 casting ladles for molten metals in different designs. Suitable for aluminum, bronze or non-ferrous metal foundries. Equipment • Crane eyes / carrying brackets • Some with inner struts • One pan with lid Condition From stock of a foundry. Sale as shown. Capacity: up to approx. 500 kg Number of pieces: 4 pieces \" Auction-ID: A7-46417-381

CONTROLS   CNC controls TRAUB TX 8 BASIC FUNCTIONS   number of spindles: 1   number machining units (turrets): 1   number of turrets: 1   live positions: yes   number of c-axes: 1 WORKING RANGE TURNING   swing diameter (max): 450 mm   turning diameter (max): 350 mm   bar diameter (max): 60 mm   worpiece length max.: 490 mm MAIN SPINDLE   spindle revolutions (max): 4000 /min   c-axis: yes TOOL MAGAZINE   number of positions: 12 ELECTRICAL SPECIFICATIONS   total power consumption: 39 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3150 mm   space requirements -front/back-: 2100 mm   total height: 2100 mm   total weight approx.: 4000 kg ATTACHMENTS (TURNING)   tailstock: yes - Machine in good condition Features: - Complete tool holders (very comprehensive) - Includes driven tool hold ...

200 litre, Stock number: T4028, Litre: 200, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs , Top: Dished, Bottom: Conical, Inner diameter: Ø 500 mm., Total height: H 1520 mm., Manufacturer: Alfa Laval, Model/type: Vacuum tank type DD, Other: No condenser

A conventional center lathe is available. An on-site inspection is possible.

Working hours machine: 23304 h Working hours laser on: 22804 h Working hours beam on: 10185 h Laser power: 4400 Watt Working range laser: 3000 x 1500 mm Max. steel: 25 mm Max. stainless steel: 20 mm Max. aluminium: 12 mm Length: 12800 mm Width: 6300 mm Height: 2400 mm Machine weight: 15000 kg Electrical connected load: 51 kVA

SMEC SL 2000 MYear of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 360 mmTurning length : 520 mm____________Description:Main spindle:Speed:6,000 rpmPower (max.):18.5 kWBar capacity:52 mmWorkpiece clamping:3-jaw chuck, Samchully MH-206 V1Tool holder:Technology:12-station turretTool holder:BMT55Tool drive:5,000 rpmFeatures/Accessories:Chip management:Chip conveyorCoolant management:IKZ pump with oil skimmer and high pressure, 10 barTool measurement:Automatic measuring armAutomation:PreparedFinished part removal:Parts catcher with collection boxSetup operation:Electronic handwheel

SMEC SL 2000 MYear of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 360 mmTurning length : 520 mm____________Description:Main spindle:Speed:6,000 rpmPower (max.):18.5 kWBar capacity:52 mmWorkpiece clamping:3-jaw chuck, Samchully MH-206 V1Tool holder:Technology:12-station turretTool holder:BMT55Tool drive:5,000 rpmFeatures/Accessories:Chip management:Chip conveyorCoolant management:IKZ pump with oil skimmer and high pressure, 10 barTool measurement:Automatic measuring armAutomation:PreparedFinished part removal:Parts catcher with collection boxSetup operation:Electronic handwheel

- Producer Giardina - Type GST 1400/2 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Feed speed adjustable 7 - 21 m/min - Installation length 3000 mm - Location - Voltage fluctuation max. +/- 5 %

Gildemeister Twin 65 Y - RG2Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mmTurning length : 650 mm____________Description:In General:Year of construction:2007Control:Siemens 840 DBar capacity:65 mmTurning diameter:350 mmTurning length:650 mmMain spindle:Technology:Motor spindleSpeed:5,000 rpmPower max.:35 kWTorque max.:370 NmC-axis:0.001Bar capacity:65 mmChuck:Hainbuch Spanntop size 65Clamping cylinder:Hollow clamping cylinderSub spindle:Technology:Motor spindleSpeed:5,000 rpmPower:26 kWTorque:290 NmC-axis:0.001Chuck:Hainbuch Spanntop size 65Clamping cylinder:Partial hollow clamping cylinderZ-axis:670 mmX-axis:175 mmTool carrier i (X/Y/Z):Technology:Tool turret, 12 stationsTool holder:VDI 30Tool drive:4,000 rpm, 11 kW, 28 NmX-axis:300Y-axis:80 mm ( +/- 40 mm)Z-axis:650 mmTool carrier II (X/Z):Technology:Tool turret, 12 stationsTool holder:VDI 30Tool drive:4,000 ...

General CNC slant bed lathe Traub is available. Tool stations: 12, tool holder: VDI40, turning diameter: 180mm, max. swing diameter: 450mm, max. turning length: 490mm, bar capacity: 60mm, travel X/Z: 160mm/490mm, rapid traverse: 15m/min, feed rate: 10m/min, machine dimensions X/Y/Z: approx. 3100mm/2000mm/1800mm, weight: approx. 4250kg, control: Traub System TX-8. An on-site inspection is possible.

EMCO Hyperturn 65Year of manuf. : 2017 Control : Siemens 840Dsl Turning diam. : 500 mmTurning length : 800 mm____________Description:Mainspindle:Technology:MotorspindleSpeed:4.0 00 rpmPower (max.):29 kWTorque (max.):250 NmBarcapacity:76 mmSubspindle:Technology:MotorspindleSpeed:5.000 rpmPower (max.):29 kWTorque (max.):250 NmEjector:PneumaticMovement in Z:800 mmToolcarrier I (X/Y/Z):Technology:Turret with 12 stationsTaper:VDI30Tooldrive:5.000 rpm, 6,7 kW, 25 NmMovement in X/Y/Z:260/100/800 mmEilgang in X/Y/Z:30/12/30 m/minToolcarrier II (X/Z):Technology:Turret with 12 stationsTaper:VDI30Tooldrive:5.000 rpm, 6,7 kW, 25 NmMovement in X/Z:210/800 mmEilgang in X/Z:30 m/minEquipment/Accessory:Chipmanagement:Chip conveyorCoolingmanagement:Internal cooling unit with paperbeltfilter and High-pressure, 40 barRawmaterialfeed I:Robotinterface preparedRawmaterialfeed II:Barloaderinterface prepa ...

A compact Sirona laboratory scanner for the dental industry is available. Scanning method: 5-axis robotic arm, technology: digital stripe light projection with autofocus, accuracy: less than 12µm, machine dimensions X/Y/Z: approx. 480mm/740mm/460mm, weight: approx. 40kg. Accessories included. Documentation available. On-site inspection is possible.

EMAG VTC 250 DUO DDYear of manuf. : 2020 Control : Siemens 840 Dsl Turning diam. : 140 mmTurning length : 700 mm____________Description:In General:Max. workpiece diameter:140 mmChuck diameter:250 mmMax. turning length:700 mmTrack I:Tool carrier I:Tool turret (X/Z)Tool drive:9,600 rpm, 44 NmTool holder:BMTNumber of stations:11 + 1 Part gripperX-axis:310 mmZ-axis:1,115 mmPosition sensors (X/Z):Direct scalesTrack II:Main spindle (OP10):Travelling direct drive spindleSpeed:5,000 rpmPower:33.9 kWTorque:231 NmChuck:Collet chuckClamping cylinder:Hydraulic clamping cylinderSupport control:PneumaticW-axis:772 mmC-axis:0.01°Position sensor (W):Direct scale:Sub-spindle (OP20):Direct drive spindleSpeed:5,000 rpmPower:33.9 kWTorque:231 NmChuck:2+2-jaw power chuckClamping cylinder:Hydraulic clamping cylinderC-axis:0.01°Track III:Tool Carrier II:Tool turret (X/Y/Z)Tool drive:9,600 rpm, 44 NmToo ...

SMEC SL 3000 BLMYear of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 405 mmTurning length : 956 mm____________Description:Main Spindle:Chuck:SAMCHULLY HS-12 (12 inch)Spindle Speed (Max.):3,000 RPMSpindle Nose:A2-8Motor Power (Cont./Max):18.5 kW / 26 kWMax. Turning Ø x Turning Length:405 mm x 956 mmTool Carrier (X/Z):Number of Tool Stations:12x BMT65Max. Milling Ø:433 mmTravel (X/Z):245 mm / 1,040 mmRapid Traverse (X/Z):24 m/min / 30 m/minTailstock:Quill Ø:110 mmQuill Stroke:100 mmEquipment/Accessories:Additional Equipment:Tool touch probe (Tool Setter, swiveling)Collision Protection:Turret with Hirth couplingYear of Manufacture:2023Weight:5,600 kg (according to configuration nameplate)Chip Management:Chip conveyorElectrical Connection:380 V / 3PH.PE / 50/60 Hz / 42 kVA::

Size: 1045 x 1135 mm Equipments: Thermal laminating Flat pile feeder IA 20 Suction feeder head Automatic rotary separator ITM 104 Jogger Maximum laminating format: 1045 x 1135 mm Minimum laminating format: 215 x 215 mm Substrate thickness: 150 - 450 g/sqm Foil thickness: 24 - 40 microns Speed: 2500 - 4500 sheets/hour

According to photos, weight estimated, in 8 pallets. Approximately 70% are functional Auction-ID: A1-45666-28

Universal lathe with cycle control VDF Boehringer VDF 400 DUS Control: Siemens Sinumerik 840 Year of Make: 2014 Internal machine no. 57 Turning length: 1,000 mm Turning diameter over bed / face slide: 420 / 235 mm Displacement of face slides: 250 mm Max. speed: 10 – 3,000 rpm Accessories: - Bezel - Suction - 3- Jaw chuck Schunk 250-62 - Tool holder

New pastry line RONDO, Smartline with Starline, type: Starline PMML260-Smartline The system was purchased in 2022, but was never used. - Pre-portioning unit - Smartline - Starline - Settlement on sheet metal - SIEMENS PLC control - Overall length: 18,508 mm A test run was recently carried out. The facility is like new. Visits and test runs are possible. More photos on request.

Loos UHD - 1250 kg/h x 16 bar, including all necessary ancillary equipment, installed ready for connection in a 20" sea container on a truck trailer. Total length: approx. 10 mtr. Height: 4.0 mtr., incl. truck trailer Width: 2.50 mtr. Weight: 14,000 kg The boiler is registered as movable and TÜV approved.

Mobile measuring arm FARO Edge AO-E0605 with laser scanner - Manufacturer: FARO - Model: Edge AO-E0605 - Device Type: Mobile 3D Measuring Arm - Version: 6 ft (approx. 1.8 m), 7 axles - Serial number: E06051228186 - Delivery date: 25.09.2015 Technical data: - Single point accuracy: 0.024 mm - Volumetric accuracy: ± 0.034 mm - Measuring volume: approx. 1.8 m - WLAN, Bluetooth, USB, Ethernet integrated Equipment: - Integrated touchscreen computer - Internal battery - Multifunction handle - Diagnostic system Laser scanner: - FARO Laser Line Probe HD - Handheld scanner for high-precision 3D scans - High scanning speed and resolution Condition: - Used - With usual signs of wear - Device was only used in school operations - Functional - Defect: On-switch sometimes does not stay in the \"on\" position Note: Can be fixed as part of a calibration Main ...

Key data: 430 mm, 1400 mm

Guide and pull spindle 32 A 380V 12.5 KW Speeds 18 - 1400 rpm Spindle passage 90 mm Lamp 4-way quick coupler with 14 pick-ups 3 interchangeable jaw sets Röhm Jaw Chuck with 33 cm Bezel Length 1.10 m Width 3 m Height 1.40 m Weight 2.5 T

Laboratory incubaor from the Spanish company JP Selecta Auction-ID: A7-46406-8

Used for pulling and shaping the sides of the shoe. Auction-ID: A7-46462-37

Professional machine for diode laser hair removal with double coupled fiber for faster, Auction-ID: A7-46406-10

Closes the shoe at the heel and sides. Auction-ID: A7-46462-2

7 monitors, 8 computers, 5 keyboards and more from manufacturers such as SAMSUNG, LENOVO and more Auction-ID: A7-46300-249