132,173 used machines on RESALE, but how to find them? Machine Search
Letterpress Type: HK 250 Manufacturer: Hikari Unwind x 6 UV leterpres print unit, Ist UV dryer Punch air unir Flat diecut unir Slittinfg unit x2 rewind unir (revolver) Label counter Machine in good condition, fully funcrional Find more here - / Contact us at -
Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5 lens - Laser cutting head with 7.5 lens - Cutting head quick-change device - Autom. Sheet metal outer edge detection - Position laser diode - progr. Cutting Gas Selection/Pressure Adjustment - Microweld - PMS Plasma Sensors - Sprintlas - ContourLas - AutoLas Plus - Oil spraying device - Autom. Pallet Changer - Work area lighting - Conveyors for small parts/waste - Multi-chamber extraction - Compact dust collector - Automatic switch-off - Safety devices - ToPs 100 lite -RJ 45 network connection - 3.5 floppy disk drive
This 3-axis LVD Phoenix FL 3015 was manufactured in 2019 and features an 8 kW IPG laser source, capable of handling sheet sizes up to 3000 Ã 1500 mm. It boasts a rapid positioning speed of 140 m/min and can support a maximum sheet weight of 900 kg. If you are looking to get high-quality cutting capabilities, consider the LVD Phoenix FL 3015 machine we have for sale. Contact us for more information.
This 3s LVD Orion 3015 Plus was manufactured in 2013. It features a powerful 2500 W Fanuc HF-excited COâ laser, capable of cutting various materials with a maximum sheet size of 3000 Ã 1500 mm and a weight of 570 kg. The machine offers impressive positioning speeds of 100 m/min on the X/Y axes. Consider the opportunity to buy this LVD Orion 3015 Plus fiber laser cutting machine. Contact us for further details.
This 3s TRUMPF TruLaser 3030 Fiber cutting machine was manufactured in 2014. It features a powerful 3,000 W TruDisk 3001 solid-state fiber laser, with a maximum cutting capacity for mild steel up to 20 mm. The machine offers impressive positioning speeds and a spacious working area, making it suitable for various applications. Consider the opportunity to buy this TRUMPF TruLaser 3030 Fiber cutting machine. Contact us for further details.
This 3-axis TRUMPF TruLaser 2030 was manufactured in 2008. It features a TruCoax3200 resonator and handles a maximum sheet size of 3000x1500mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 2030 machine we have for sale. Contact us for more information.
This F&O 03035 laminating press was manufactured in 2003. It features a working width of 1300 mm and a melting unit capacity of 200 kg. The outfeed roller conveyor is approximately 9000 mm long. In 2024, the infeed conveyor was upgraded with 4 brushes and radiant heaters. Consider the opportunity to buy this F&O 03035 laminating press. Contact us for more information.
8 axis version - 6Linear + 2 axes circular bar capacity 42mm Fanuc 160i IEMCA BOSS 545 E Driven Tools HD coolant system Bürener machine was operated with cutting oil!, Control type: CNC /
LAPPING MACHINE Hahn & Kolb LHD 0 Machine from a state institution/Very well maintained -Lapping disc diameter 400mm -Max. workpiece height 110mm -Max. distance between the cast lapping discs 80mm -Speed range 40-80-160 rpm -Speed drive motor 700-1400-2800rpm -Total power 1.8-2.7KW -Turning device manually operated Hebkn Au Sevdkvfo Tol -Original documentation -Well preserved original condition Dimensions: LxWxH 1.4x1.3x1.9 meters / weight 1600Kg
WEILER COMMODOR L&Z Spindle Lathe -Turning length 1000mm -Turning diameter max. 160mm Bar Passage 56mm -Speed range 25-2000 rpm -Automatic longitudinal/plane feeds - Thread: Metric/Inch/etc. -Tailstock Mk4 Hjbkn Au Ssun Ulhs Tsl -Three-jaw chuck approx. 250mm -Multifix base holder with insert -Coolant device -Electric lining protection -Swarf back wall -Machine documentation -Good operational condition Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg
This 3-axis Bystronic BySpeed 3015 was manufactured in 2006. It features a maximum sheet size of 3000 x 1500 mm and is equipped with a powerful 4400 watt CO2 resonator. With recent upgrades including a W-axis replacement in 2025 and a blower replacement in 2023, this machine is well-maintained. The machine includes a ByTrans Extended. If you are looking to get high-quality laser cutting capabilities, consider the Bystronic BySpeed 3015 machine we have for sale. Contact us for further details.
A CNC counter-spindle lathe Index with Y-axis and bar feeder MBL 42 is available. Turning length: 400mm, turning diameter: 420mm, bar capacity: 60mm, speed: 6000rpm, machine dimensions X/Y: 4750mm/1950mm. Documentation available. An on-site inspection is possible.
FD84 S FOBA Laser System Year of construction 2003 Used, not tested, without pump arrangement Windows 2000 Without warranty Shipping possible Optional for an extra charge on request: with pump arrangement, tested and inspected
FD84 S FOBA Laser System Year of construction 2002 Used, not tested, without pump arrangement, without PC Without warranty Shipping possible Optional for an extra charge on request: with pump arrangement, tested and inspected
Trumpf TruLaser 5030 with double tower storage system - laser cutting system - Working area: 3000 x 1500 mm - Laser power: 5000 W - incl. LiftMaster Compact & TruStore 3030 - Year of construction 2013 Facilities - Working area: 3000 x 1500 mm - Closed machine frame - Integrated cabinet - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drive - Closed beam guidance via optical cable (LLK) - Machine cooling unit (water-air) - Integrated control cabinets with interior lighting - TruDisk power supply via the machine - Longitudinal conveyor belt - Work area lighting - Position laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Trumpf Laser - LLK according to standard layout (laser right next to the machine) - Laser cooling unit (water-air) - Excitation ...
Used Used Sleever Packaging 2012: Year: 2012 Condition: Good Used Sleever Packaging: Model: ULS 2000 +TA4L Year: 2012 Speed: 2400 bph Safety protections Code: EA 670 More details: https://bottlingscout.com
Used Used Sleever International 2015: Year: 2015 Condition: Good Used Sleever International: Model: SKEEVERCOMBI STEAM Year: 2015 Speed: 9360 BPH with bottles of 0.6 l ; 12.600 BPH and bottles of 0.750 l Linear 1 lane Supported bottle diameter measurements: ? 60 mm Safety protections Code: EA 666 More details: https://bottlingscout.com
Used Used Sleever Fuji Skeevercombi Steam 2015: Year: 2015 Condition: Good Used Sleever Fuji Skeevercombi Steam 2015: Model: SKEEVERCOMBI STEAM Year: 2015 Speed: 6300 BPH con bottiglie da 0.750 l Direction: Linear 1 lane Supported bottle diameter measurements: ? 80 mm Safety protections Code: EA 664 More details: https://bottlingscout.com
Used Used 2019 Sleever Clever 12.000 bph: Year: 2019 Condition: Good Used 2019 Sleever Clever 12.000 bph: Year: 2019 Speed: 12.000 bph Steam Tunnel Bottle rejection system Safety protections Code: EA 643 More details: https://bottlingscout.com
TRUMPF TruLaser 5030 fiber laser was built in 2010 in Germany by TRUMPF Maschinen Grüsch AG. The machine, which is designed for precision cutting of thin and medium-thick sheet metal, is used, among others, in the automotive or aerospace industry. Thanks to its high efficiency, the TruLaser 5030 is ideal for both prototyping and mass production. Workpieces are machined by means of a stable 3 kW fibre-optic beam, which is generated by a laser source of the highest energy efficiency. Fibre optic technology increases machining speed and efficiency while minimising material loss at the same time. All this is complemented by an advanced CNC controller with all the necessary functions. The TRUMPF TruLaser 5030 L41 fibre laser weighs 12000 kg. Technical specifications of the TRUMPF TruLaser 5030 laser cutting machine - CNC control: TRUMPF - laser power: 3 kW (3000 W) - feed in the X/Y/Z ...
Dispositif à tronçonner pour broche Schaublin 102 - Type F. Etat neuf, jamais utilisé, avec des traces de stockage. Für Spindel Schaublin 102 - Typ F. Zustand: neu, nie gebraucht, mit Lagerspuren.
Velo 40cm x 40cm Filter Frame with Pump Second Hand Manufacturer: Velo acciai Model Type: SF44NDF Serial No: 13789 For more information and more available stock please visit us at - advancedbrewing.co.uk
Table size 2400 mm Max turning diameter 2500 mm Max. workpiece height 1600 mm Max. workpiece weight 12000 kg Machine weight 54320 kg
Key data: 5000 mm, 8000 mm, 4000 mm
Berthiez Vertical Turning Lathe • Year of manufacture: 1982 • CNC type: older system (CNC axes) Dimensions and Working Parameters • Table diameter: 5000 mm • Maximum turning diameter: 8000 mm • Maximum turning diameter at center: 5000 mm • Maximum workpiece height: 4000 mm • Ram travel (T): 3600 mm • Saddle travel (TA): 650 mm Speed and Power • Table rotation range: 0.6 – 60 rpm • Table motor power: 140 kW • Maximum load on hydraulic support: 160 t • Ram feed speed: 400 mm/min • Saddle feed speed: 2500 mm/min • Spindle rotation for milling: 0.01 – 0.50 rpm • Positioning speed: 0.001 – 0.50 rpm Tool Carriages 1. Hand-Operated (Primary) Carriage • Kulannum section size: 360 × 360 mm • Axial travel (CA): 2500 mm • Horizontal travel (CB): 3400 mm • Tilt range (E-F): 15° – 45° 2. Side Tool C ...
control: Haas Automatic : 3 Backen x-travel: 850 mm changer: 12 fach serial number: 70422 total power requirement: 22 kW weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre distance: 1500 mm : 210 serial number: 1289 multifix: ja : ja weight: 1,45 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 4000 mm width: 1800 mm height: 1800 mm : 5000 x-travel: 600 mm tail stock: ja tool adaptor: VDI 30 weight of the machine ca.: 5,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: Fanuc length: 3700 mm width: 1850 mm height: 2000 mm accessories:: ja weight of the machine ca.: 4,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 230 mm turning diameter over bed: 970 mm turning diameter over slide rest: 720 mm Control: Fanuc OiTD turning length: 2200 mm total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m Year of manufacture 2013 Control: Fanuc OiTD Other controls possible Turning length (mm) 2200 Max. turning diameter (mm) 970 Max. turning diameter over slide (mm) 720 Spindle diameter (mm) 230 Diameter range (mm) 850 Speed: 500 kW 37 Voltage: 400V Hz 50 Including: 4-jaw chuck, Ø 800 mm rear Pneumatic 3-jaw chuck, Ø 600 mm front The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your worksh ...
Top-up labeller from the manufacturer HERMA Item condition: as good as new Availability: immediately Output: Up to 20 pieces per minute (depending on the operator) Tolerances: ± 0.5 mm in the label travel direction ± 0.5 mm perpendicular to the label running direction Description of the labels Distance between labels: min. 2 mm Distance of the labels to the edge of the carrier tape: min. 1 ± 0.3 mm Label thickness: 40 – 100 μm Weight: 30 – 200 g/m² Carrier belt thickness: 23 – 120 μm Label material: Paper Single-layer and multi-layer Suitable for internal deflection with a diameter of 25 mm and External deflection with diameter 45 mm Material carrier strap: Paper or plastic Without punching With as few machine-compatible gluing joints as possible Breaking resistance longitudinally at least 92 N per 15 mm Beam bandwidth according to DIN ISO ...
Inv. Num. : 8985 Type: FL 400 3D Producer: Bystronic Created: 2020 Parameters: Operating hours: 11000 h Maximum cutting diameter: 406 mm Input/output length: 12000 mm
A CNC slant bed lathe Okuma is available. Chuck diameter: 200mm, swing diameter: 400mm, turning diameter: 300mm, turning length: 470mm, tool stations: 8. Machine dimensions X/Y/Z: approx. 4000mm/2150mm/2150mm, weight: approx. 5500kg, control: OSP 3000 L. Documentation available. An on site inspection is possible.
Fiber laser cutter OTINUS 1500x3000 3 kW with covered cutting head
Vertical lathe Hessapp DVH 250 BJ 2004 (already dismantled)
Fiber laser cutting machine OTINUS 1500x3000 12 kW closed with exchange table
Fiber laser cutting machine for profiles and pipes 3kW 230x6000 mm
Inv. Num. : 8986 Type: DH-250/4 Producer: WMW Created: 1983 Parameters: Length: 3400 mm Width: 2100 mm Height: 1600 mm Weight: 4800 kg
Straight runner for applying a sign or wrap-around label (with glue) to cylindrical containers,, Gluing height: 205mm, (optional 255mm possible) classic strip gluing, Label length: 80 – 335mm (e.g. 99mm, 850g can), Performance: max. 9,000 containers/hour, without restrictions, as label lengths are independent, Frequency controlled with fully automatic speed control, Triggering the labeling process via photocell, Incl. glue pump with heating and stainless steel lid, Silver grey paint finish, The machine comes from a small factory and was only used sporadically,, This makes it excellent. However, it has been technically and visually overhauled and is therefore in perfect condition., Including 6 months warranty on mechanical parts (excluding wear parts), The sale includes one format set of your choice, additional format sets are available optionally at an additional cost., Optionally avai ...
In this case, the containers to be labelled are fed in by hand. The system was used for cylindrical jars with a low height. They are first given a base label from below, turned by 180° using a turning basket, and then given a security seal label from above. The labelled jars then run onto a storage table, offset by 90°.
Fully automatic labeling machine for self-adhesive labels K7,, Hourly output 500-800 labels / h, compact and on wheels, ideal for low power, space-saving, Standard equipment:, • Station for body labeling with brake motor, • Control panel with potentiometers, • Equipped for cylindrical glasses, bottles and smooth cans, • Monoblock construction in stainless steel, • Working direction from left to right, • Possibility to put in line, • Fixed bottle collection table 40x50cm, • Power connection 400 volts 50 Hz., • CE protections and user manual, • additional equipment front and back labels from the same roll incl. •, Weight: 200.00 kg, power: 500-800 labels / h
Side labeller for flat products (boxes), left-hand model, pneumatically controlled, operating pressure: 4 - 6 bar, (explosion-proof), max. passage width 150 mm, without printing unit, height-adjustable on frame (150 mm).
Overview This KRONES Topmatic labelling machine was manufactured in 2011 and was previously operated in a returnable glass production line. The machine is designed as a head machine with parallel bottle infeed and discharge and is suitable for high-speed labelling applications. The system is equipped with two labelling aggregates: one for neck and front labels and one for back labels. The neck label is applied using hot glue for closure sealing, while the remaining labels are applied using cold glue. The machine is fitted with two glue pumps and includes one spare hot glue unit. The back labelling station is disengageable, while the front station is permanently installed. With 36 bottle plates and a production capacity of up to 33,000 bottles per hour, the machine is suitable for demanding returnable glass operations. The machine has accumulated approximately 44,350 operating hours as of ...
Used Used Filling Monoblock Polaris 2.500 bph: Year: 2011 Condition: Good Used Filling Monoblock Polaris 2.500 bph: Model: b3000 Year: 2011 Speed: 2.500 bph 20 filling valves Product: vinegar, balsamic vinegar and similar products, creams and thick products Direction: linear Number of heads: 2 Type of cap: flip top, aluminum metallic, Push synthetics Type of capsule: PVC shrink caps Type of label: Three-station linear adhesive Number of stations: 3 Number of labels: 3 labels: front, back and collar; Paper and plastic Safety protections Code: QT 704 More details: https://bottlingscout.com
faceplate diameter: 1400 mm swing diameter: 1600 mm turning height: 1200 mm turning speed range - milling: 1 - 240 U/min Control: Siemens SIN 820T ram head - cross travel: 1000 mm total power requirement: 55 kW weight of the machine ca.: dimensions of the machine ca.: m A.T.C. 12 positions Tooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 550 mm turning length: 3100 mm control: Fagor 8055T turning diameter over slide: 310 mm turning dia. in gap: 790 mm length of gap: 283 mm spindle passage: 51 mm turning speeds: 80-3500 U/min Power: 15 KW 3-jaw chuck: 250 mm steady: 220 mm workpiece weight: 2000 kg The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS ...
Used Used Triblock Omar Synphony 6.12.2T.EL: Year: 2015 Condition: Good Used Triblock Omar Synphony 6.12.2T.EL: Year: 2015 Speed: 1500 bph Monoblock composed of: Washing bottles Dryer bottles by air blade Capsuling machine with 2 rolling heads for polylaminate caspules. Labelling machine with 3 adhesive station to apply front, back and neck with step-by-step motors Regulation machine by PLC Bottles equipments for cylindrical bottles of 0.75 L Code: EA 87 More details: https://bottlingscout.com
Used Used Monoblock GAI 6020: Year: 2005 Condition: Good Used Monoblock GAI 6020: Model: 6020 Year: 2005 Speed: 2000 BPH Direction: Linear Manual head adjustment 2 heads Type of capsules: ? PVC-thermal head ? Polylaminate LABELLER 2 stations Adhesive Applicable labels: ? Front ? Back Sizes of the diameters of the supported bottles: Bordeaux 0.75 lt Safety protections Code: EA 645 More details: https://bottlingscout.com
turning diameter: 550 mm turning length: 1100 mm control: Fagor 8040T turning diameter over slide: 230 mm turning dia. in gap: 740 mm length of gap: 350 mm spindle passage: 72 mm turning speeds: 100-4500 U/min Power: 7,5 KW 3-jaw chuck: 250 mm steady: 220 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution ...
turning diameter: 660 mm turning length: 2000 mm control: Fagor 8050 turning diameter over bed slide: 370 spindle diameter: 104 mm total power requirement: 18 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
