We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,106 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
ALFA-LAVAL DD500LC high-vacuum deearator for viscous products. Capacity up to 6000 lt/hr. Equipped with internal condensor and mechanical level controller.
used
Max. pressing force 60 to Installation height 500 mm Stroke of the press ram 300 mm Passage between the columns 430 mm Pusher bore 40D H7 Clamping table 430 x 310 mm
used
plastic belt with fold-down sides belt width 580 mm outfeed height ± 2.700 mm infeed height : ± 800 mm total dimensions : ± 6.800 x 1.000 x 2.700 mm adjustable speed mobile 1 kW
new
New Alfa Laval GTPX-517-TGV-15-CEFG-60 Desludger Disc Centrifuge. Stainless steel construction (product contact areas), max bowl speed 4135 rpm, three phase separation design, centripetal pump liquid discharge, deep sludge design lower casing, direct drive configuration, mounted on sub-base, 37 kW drive motor 460/3/60
used
1 LAMPERTI raising machine type GB, year 1988, wire with 230 cm, 36 raising rollers, can run open width or tubular, updated with inverter to the main motor
used
Used and overhauled Alfa Laval GTPX-517-TGV-15-CEFG-60 Desludger Disc Centrifuge. Stainless steel construction (product contact areas), max bowl speed 4135 rpm, three phase separation design, centripetal pump liquid discharge, deep sludge design lower casing, direct drive configuration, mounted on sub-base, 37 kW drive motor 460/3/60
used
Oval openwork Laundry basket // 1860 kg; hot-runner-2 points; Pneumatic servo.; very good codition ; made by Italy dimension mould - 795/595/560 mm // dimension basket - 580/390/240 // weight - 410 g
AUTOMATIC SPINNING LATHE DENN RPE-290 Denn Mod.RPE-290 Automatic Spinning Lathe- Spindle Speeds 615/1060/1825 RPM. More information on request.
new
New Lambertini 4 jaw independent chuck 500 mm adaptation DIN 55027 - 11
used
Te Koop: Alfa laval Tetra Pak Type CLIP 8-RH 1999 Bouwjaar Voor meer informatie kunt U bellen of mailen. Email: wh.derikx@gmail.com. Phone. +31 620758459 De nu kopen prijs is excl. 21% btw.
Qty. 1 Second-hand Sendzimir reversing cold rolling mill Mfc.: Waterbury Farrel Type: WZS- Reversing - Sendzimir Rolling Mill type: ZR – 23M – 31”, reversing Z”, 1 – 2 – 3 – 4 Built: 1977 Modernised in 1991 Capacity: approx. 50 000 T/annum Strip width: 370 – 740 mm Strip tension: controlled up to 10 Tons Thickness: Entry: 3.5 mm Exit: 0.20 mm Speed: 183 – 368 m/min. Min. exit thickness of material M70-A: 0.04 mm Last pass from 0.12 to 0.04 mm Qty. 1 Second-hand roll grinder Mfc.: Landis Type: L-28A Roll dia.: 40-100 mm Roll length: up to 1500 mm Qty. 15 Containers
used
for the production of beer and soft drinks Capacity: 30,000 l/h
used
Stitching Machine
used
ALFA LAVAL BRPX 214 SEPARATOR CENTIFUGE USED BEER, WINE, JUICES ALFA LAVAL BRPX 214 SEPARATOR CENTIFUGE USED MANUAL TOOLS Motor 18,5 kW Hydraulic capacity 30.000 l /h
used
TURNING ROLLERS LAMBERT JOUTY CZ100 max load capacity 100 tons auto alignment good conditions, ready to work!
used
Used glass lined reactor made by Lampart. Capacity 3000 L. Anchor agitator.
used
- net.weiht 641 kg - Liquid wolume 253 L - Design pressure 10 bar - Total area 91,9 m2 - material AISI 316 - sealing material EPDMF CLIP-ON
used
Alfa-laval plate cooler typ. M6-MWFDR
used
Alfa-Laval M101-BWREF plate cooler
used
Laska vacuum cutter 330 liter Completely made of special stainless steel 330-liter bowl made of stainless steel Integrated vacuum pump Integrated loader for meat bins 2 mixing speeds 2 bowl speeds – fast and slow Unloading device: left side Main cover is made of special steel, stainless steel 6 pieces Knives Machine dimensions in cm: width: 310 depth: 400 height: 285 Weight: 5550 kg Main motor power: 120 kW Voltage: 400 V, 50 Hz Delivery time: 30 working days after advanced payment
Self-cleaning centrifuge Alva Laval VNPX 410 SGD 34 for: -Juice -wine -beer
used
Dates will follow later!
used
Seesaw with belt conveyor, approx. 5,65m - used - : Price per piece: 1.250.-€ (net), dismantled and loaded! (BF 3160) Manufacturer: Van der Lande Year built: unknown - probably 2008 Element width: approx. 75cm, Strap width: approx. 60cm Length: 2.55m plus 3.10m Total length approx. 5.65m Element height: approx. 18cm With pneumatic cylinder Overcomes a height difference of approx. 70cm The belt is slightly ribbed on one side
used
Following Separator available for sale. Make:ALFA LAVAL Type:WHPX 405 TGD 24-60 Serial Number:4020415 RPM:1700-1800 r/m ,142-150 Product No.:881071-01-01 Machine Topper No.:544230-01 Bowl No.:544225-01 Machine Bottom part:540224-02 MOTOR Make:Made in Italy LS 132S 38440 VOLT:440 HZ:60 KW:7.5 RPM:1730
used
Following separator available for sale. Make: ALFA LAVAL Type: WHPX 510 TGD-24-60 Manufacturing Number: 4015516 RPM: 1700-1800 r/m,142-150 Product Number: 881035-03-04 Machine Topper No.: 544117-02 Bowl No.: 544118-03 Machine Bottom Part: 540225-10
used
Following Separator available for sale. Make: Alfa Laval Type: MOPX 210 TGT-24 Manufacturing Number: 2997227 RPM: 1700-1800 r/m ,142-150 Product No.: 881030-01-01 Machine Topper No.: 539931-80
used
Following separator available for sale. Make: ALFA LAVAL Type: MMPX 304 SGP-11-60 Serial Number: 4044302 Speed Max: 9510 r/min Product No.: 881100-01-01 Machine Topper No.: 545964-01 Bowl No.: 54595-01 Machine Bottom Part: 544466-04 MOTOR Make: MAN Volt: 260/440 HZ: 50 / 60 RPM: 3480 KW: 3.55
used
Following Separator available for sale. Make: ALFA LAVAL Type: LOPX 705 SFD 30 Serial Number: 4086702, 4087320 Year: 1996 Bowl Speed: 7540rpm Motor Power: 1800rpm No. of Phase: 3 KW: 4 HZ: 60 Made in Spain
used
Following separator available for sale. Make: ALFA LAVAL Type: MMPX 403 SGP-11 Serial Number: 4119247 Year: 2002 Product No.: 881099-03-01 Inlet & Outlet: 561312-01 Bowl: 561123-01 Machine Bottom part: 561371-01 Max Speed (Bowl): 9365 r/min Speed Motor Shaft: 3600 r/min HZ: 60 KW: 2.5 Maximum Density of Feed: 1100 kg/cm2 Maximum Density of Sediment: 2631 kg/cm2 Maximum of operating Liquid: 1000 kg/cm2 TEMP: 0/100 Deg.C MOTOR Make: ABB Volt: 380/420/220/240D / 40/480/250/280b HZ: 50/60 AMP: 4.6/8.00 / 4.67/8.00 RPM: 2880/3470 KW: 2.2 /2.5 COS Q: 0.87 / 0.86
used
Following Separator available for sale. Make: ALFA LAVAL Type: LOPX709SFD34-50 Serial Number: 4082348 Year: 1995 Product Number: 881243-02-02 Machine Top Part: 557114-01
used
Following Separator for sale. Make: Alfa Laval, Made In Italy Type: FOPX 610 TFD 24 Serial Number: 4097640 Year: 1997 Product No.: 881244-03-03 Machine Top Part: 561012-01 Bowl: 554048-04 Machine Bottom Part: 540225-10 Max Speed Bowl: 5148 Speed Motor Shaft: 1800 El. Current Frequency: 60 Recommended Motor Power: 12KW Max. Density of Feed: 1100KG/M3 Max. Density of Sediment: 1350KG/M3 Max. density of Operating Liquid: 1000KG/M3 Process Temperature min/max: 0/100 OC
used
Following Separator available for sale. Make:ALFA LAVAL, MADE IN ITALY Type :FOPX 609 TFD 24-60 Serial No.:4093191 Year:1996 Product No.:881244 – 02 -02 Machine Top Part:557057 – 01
used
Centrifugal pump Manufacturer: Alfa-Laval (Sweden) Type: ME-155AE N°: 31452-695 Capacity: 30,000 l/h (water) at 28 m height very good condition LWH: 830 x 300 x 450 mm
used
Belt grinding machine for wood & metal, roller spacing approx. 3000 mm
used
Long belt grinding machine, roller spacing approx. 3000 mm
used
This control is for sale. Never used and never built in. Stock! See pictures Sale only EU !
used
Separator built on a stainless steel skid, with supply pump, discharge pump, sludge pump, circulating tank, stainless steel lines and valve, wired with switch box. For cleaning polluted water. Large water phase, small light phase and dirt phase. No! Emptying machine ! Must be opened for cleaning. Time: approx. 5 min. Ready for use. For more questions, please email.
used
Travel: 0 x 0 x 0 mm [ X x Y x Z ] Metal 3D Printer Laser Type / Power: Yb Fiber Laser / 250 W Wavelength: 1070 nm Lens: F-Theta Precision Lens Volume of construction: 100 mm x 100 mm Reservoir volume: 200 mm x 200 mm Coater: Rotation-guided coater Gas connection: Argon / Nitrogen Layer thickness: 20 - 100 microns Scan: jog 20 m/s, operation 6 m/s Spot size: min. 40 microns Chamber opening: 450 x 180 mm
used
IN GOOD CONDITION FOR USE, stoped running
used
properties: Used belt conveyor Condition: fully functional with traces of usage Ideal for fast material transport Expertly dismantled and packaged Condition: used Incl. SEW motor Technical Data: Dimensions of the gut conveyor Total length: 5,820 mm Total width incl. motor: 930 mm Total width without. Engine: 850 mm Belt width: 550 mm Condition: good (used) Belt type: Smooth Material: Steel Frame Height: 170mm belt conveyor The belt conveyor is ideal in the picking zone for interlocking machines or workstations and to optimize the internal process. During transport, the belt conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the feed-off or dispensing point and also serves, for example, as a connecting line in front of or between production and machining machines. It also enables efficie ...
Temperature control unit Manufacturer: Lauda Type: LTH140P No.: X12217 Power: 7 kW Filling volume: 5 l Year of construction: 1999 with operating instructions
used
Vertical milling machine make IBERIMEX - LAGUN type FVA 4 LAMachine -No: 2496 Year 1978Technical specifications:Table size 1800 x 380 mmTable path X 1320/1300 mmCross table Y 360/340 mmTable perpendicular Z 428/420 mmSpindle mount ISA 50Speed range 28 - 1400 rpm.12 longitudinal and transverse feeds 12 - 780 mm / min.12 vertical feeds 3.6 - 234 mm / min.Rapid traverse longitudinal and transverse 3000 mm / min.Rapid traverse vertical 900 mm / min.Distance spindle / table 555 mmaut. Quill stroke 127 mm3 aut. Quill feeds 0.05 / 0.1 / 0.2 mm / rev.Milling head swivelable on both sides by 45 °Drive power 12.5 hpFeed motor 4.0 hpExternal dimensions L x W x H 2050 x 2700 x 2475 mm Weight approx. 4.3 t With - round table used, in good working conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding ...
used
Pipe Bender Fabr. LANG Type ONDOMAT 60 VNMachine -No: 4035 built in 1980Working area: 60 x 2 mmPressure force: 20000 kgHolding force: 7500 kgStroke: 256 mmMax. Bending angle: 135 °Max. Bending radius with pipe diameter 25-90 °: 220 mmFeed rate: 100 mm / 1 sReturn speed: 100 mm / 0.6 sMax. Tool width: 124 mmMax. Installation dimension: 220 mmWidth of bender roll holder: 90 mmextreme bolt distance: 542 mmMax. Bending number p. Min .: 12Drive power: 22 kWWeight approx .: 3600 kgDimensions: 2700 x 1150 x 1550 mmWith- div. Bending tools- Length stopused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Pipe Bender Fabr. LANG Type ONDOMAT 40 VSMachine -No: 3984 Year 1980for simultaneously dimensionally bending several parts in U-shape - with 2 or 3Turns - in a single operationBending after the back pressure bending systemWorking area: 32 x 2 mmMax. Bending radius at 180 ° bend and pipe drift. 280 mmLeg distance at U-parts: 200/680 mmMax. Pressure: 140 barWorking height: 950 mmHydraulic oil filling: 200 lConnected load: 13 kWWeight approx: 1600 kgDimensions: 2000 x 1400 x 1250 mmWith- different tools- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electro-hydraulic. Mandrel bending machine Fabr. LANG type EL-OR 50Machine -No: 4125 built in 1981Max. Pipe diameter at 40 kg mm²Radius 3 x outer pipe diameter: 50 x 2 mmMax. Bending radius up to middle pipe: 200 mmminute Bending radius up to inner pipe edge: 35 mmMax. Pipe insertion length: 3000 mmMax. Bending angle: 180 °Bending head speed: 14 rpmtheoretical number of sheets 90 / U.: 900Drive power: 7.5 kWWeight approx: 1800 kgDimensions approx: 4000 x 1300 x 1200 mmWith- Hydraulically powered and working automatically- bending table drive- Tube clamping device with infinitely adjustable clamping pressure- Dornrückzugseinrichtung- Automatic bending roller return device- Hand-operated length stop device- Bend angle selector for settingxa0xa0 4 different bending angles- automatic mandrel lubrication device- Use of running counter-pressure slide rails- Footswitch- without toolsused, in ...
new
Description: -Horizontal band saw Lantzmann BS910E Premium (electric motor) -Cutting speed control -Cutting size adjustment -Strong and strong rail system -Powerful engines for larger logs -Electronic height adjustment (EAR) -Tension indicator (strain gauge) -4.8 m cutting length as standard -40mm wide saw band Options: -GX630 Honda engine with electric starter -2m rail -Carbide saw band Technical specifications: Engine: Electric motor 11 kW Power: 400V / 50Hz / 3 phases Cutting diameter: 910 mm Cutting length: 4800 mm Frame: 4 parts Saw blade size: 4576x40x0.9 mm (Carbide, 208 teeth) Standard rail size: 6000x1010 mm Safe cutting speed: 20 - 30 s / m Tooth spacing: 22 mm (0.86 ") Saw blade wheel diameter: 508 mm (20 ") Automatic saw blade lubrication: No. Adjustable blade guide: Yes Log mounting bracket: Yes Package size: 2080x750x950 mm Weight: 761/821 ...
new
Description: -Powerful, fully hydraulic cordless saw -Lifan motor with electric starter, feed and conveyor belt -Hydraulic feed and conveyor belt 320 cm long and 15 cm wide -The conveyor belt is lifted and lowered with a winch -The length of the firewood can be set as desired. The maximum length is 30 - 57 cm, diameter 37 cm -The price includes a 3.2 meter conveyor with a winch, belt width 150 mm Technical specifications: Engine: 188F LIFAN petrol engine Weight: 520 kg Max. log diameter: 38 cm Max. log length: 55 cm Engine speed: 3800 rpm Chainsaw: 18 inches (STIHL) Cylinder bore: 3.2 inches Duty cycle time: 7 seconds Tires: 12 inches Splitting wedge: 4-handed (optional 6-handed) -This machine is available right away. -For shipping information contact us directly.
new
Description: -Powerful, fully hydraulic wood saw with electric motor -Hydraulic feed and conveyor belt 320 cm long and 15 cm wide -The conveyor belt is lifted and lowered with a winch -The length of the firewood can be set as desired. The maximum length is 30 - 57 cm, diameter 37 cm -The price includes a 3.2 meter conveyor with a winch and a hydraulic feed table 180cm with an electromagnetic switch Technical specifications: Motor: 7.5kW, 50Hz, 380V, 3-phase Weight: 520 kg Max. log diameter: 38 cm Max. log length: 55 cm Engine speed: 4800 rpm Chainsaw: 18 inches (STIHL) Cylinder bore: 4 inches Duty cycle time: 8 seconds Tires: 12 inches Splitting wedge: 4-handed (optional 6-handed) -This machine is available right away. -For shipping information contact us directly.
new
Description: -Powerful, fully hydraulic cordless saw -Lifan motor with electric starter, feed and conveyor belt -Hydraulic feed and conveyor belt 320 cm long and 15 cm wide -The conveyor belt is lifted and lowered with a winch -The length of the firewood can be set as desired. The maximum length is 30 - 57 cm, diameter 37 cm -The price includes a 3.2 meter conveyor with a winch and a hydraulic feed table 180cm with electromagnet. switch Technical specifications: Engine: 188F LIFAN petrol engine Weight: 520 kg Max. log diameter: 38 cm Max. log length: 55 cm Engine speed: 3800 rpm Chainsaw: 18 inches (STIHL) Cylinder bore: 4 inches Duty cycle time: 8 seconds Tires: 12 inches Splitting wedge: 4-handed (optional 6-handed) -This machine is available right away. -For shipping information contact us directly.
used
LAUTENSCHLÄGER pneumatic hold-down, pressure device, steaching rulers ---------- Technical data ---------- Number of spindles: 8 pieces ; TOP! Workshop tested & ready for immediate use