la used for sale

roll diameter: 250 mm roll length: 500 mm rolls drilled: peripher Nip adjustment: hydraulisch total power requirement: 2x 5,5 kW Condition: new rolling mill, with CE marking, with 2 year warranty Specification: Monobloc laboratory rolling mill 250 x 500 mm - new - roll diameter: 250 mm - Roll length: 500 mm - Roll bore: peripherally drilled - Single drives: variable friction ratio - Roller bearing: roller bearing with manual grease lubrication - Gap adjustment: hydraulic - new hydraulic unit for roller nip and emergency system - New rotary unions make Johnson-Fluiten - two adjustable guide plates to adjust the working range on the rollers. - Working range approx.: 100 to 460 mm - Roller gap, during the working phase 25 mm - tiltable guide plates made of nylon-polyethylene Material - Stainless steel tank - New saf ...

Used self-cleaning disc centrifuge made by Alfa Laval, type: MRPX 410 TGD 74. New 1988. Capacity: 7.500 liters/h. Technical data: - Function: milk separator, - Milk skimming capacity: 7.500 l/h, - Whey skimming capacity: 10.000 l/h, - Worm wheel shaft: 1420 - 1500, - Total installed power: 18.5 kW (1460 rpm), - RPM counter: 118-125, - Includes tools (wrenches), control, base, - Voltage: 380V / 50 Hz / 3 phases, - Stainless steel.

Manufacturer: P.E. Labellers Model: MASTER M.S. Type: 12T-770/4S-4E Year of Manufacture: 2007 Electrical Specifications: - Voltage: 400 V - Phases: 3 - Current: 11 A - Power: 6 kW - Frequency: 50 Hz Pneumatic Specifications: - Air Consumption: 30 L/min - Air Pressure: 5 bar Weight: 2200 kg CE Certified Y271010885 can manage a bottle height range from 120 to 400 mm - The range of bottle Ø goes from 30 to 120. - For the label length, this machine can apply labels that cover max 180° of the bottle. - The adhesive stations have a size of 200 H. - The machine is predisposed for the mechanical centering via bottom notch. - Max velocity of the machine is 8000 B/H. Find more here - / Contact us at -

Polish Lathe / Polishing Machine Between points: 1500 mm Centre height: 180 mm Spindle CM3 Spindle speed driven by speed variator Pneumatic tailstock Equipped with a vaccum system (only air hose to plug in) Machine was used to polish axes Voltage: 220 V mono Dimensions (L x W x H): 3200 x 1000 x 1900 mm Weight: 1,2 T

P3 Foam Cleaning for Fillers and Rinsers Pumps and valves in a stainless steel control cabinet Attached control cabinet with Siemens S7 control

Manufacturer: LASM Model: LS-2N1A Year of Manufacture: 2001 Type of Machine : profile sander with 2 sanding belts and one abrasive wheel station Technical Specifications: - Max workpiece thickness: 80 mm - Min workpiece length: 100 mm - Overall Dimensions: 4400 × 1400 × 1900 mm - Net Weight: 1200 kg Sanding Belt Units (x2): - Two-speed motor - Unit articulation: 135° - Belt dimensions: 80 × 2450 mm - Belt speed: 7–14 m/sec - Pneumatic belt tensioning - Mechanical oscillation - Pad movement timer (exit/return) - Air blowing system (belt cooling & cleaning) Abrasive Wheel Unit (x1): - Single-speed motor: 2 HP - Unit articulation: 180° - Max wheel diameter: 220 mm - Shaft motor diameter: 30 mm - Feed track speed: 5–25 m/min (variable) Find more here - / Contact us at -

Laetus Code Reader, Elec: DC18...32V

Lid placing machine, make Laue Engineering, year 2018, used for tin cans with a diameter of 127 mm (dried milk), Slip lid with integrated spoon (10 ml), Consisting of:, can conveyor, for the supply of the cans, feed generation in front of the separation station and transfer of the finished article (can with lid)., execution: Welded frame made of stainless steel with Intralox conveyor belt, drive motor, feed star and goods security, cover conveyor: Feeding of the lids to the lid placer, execution: Welded stainless steel frame with Intralox conveyor belt, drive motor and article surveillance, lid setter: Separation, positioning and joining of cans and lids, return of finished part to can conveyor, execution: Welded frame made of stainless steel with carousel (8 stations), drive motor and goods security and complete cladding; switch cabinet, Destacker: Lid magazine and lid feeding on lid co ...

Filling and packaging plant for vinegar/oil in plastic bottles:, equipped for 0.75 ltr vinegar bottle,, Capacity: up to 4,000 bottles per hour, Consisting of:, 1. Bunker for empty plastic bottles, approx. 6 m long, capacity: approx. 400-600 containers, 2.Kamman bottle sorting system type K23F, The machine ensures that the bottles to be filled are conveyed out of the machine vertically, with the mouth facing upwards, Sorting capacity: approx. 3,000-6,000 pieces/h, 3. Conveyor belts, 4. Lightweight vacuum filler, make Cobert type Olimpia20/95, With 20 filling stations, Dimensions: LxWxH: 1,520x1,250x2,330 mm, Possible bottle diameters: 55-120 mm, Cost 117,000 DM in 1989, 6. Inkjet coder, make REA-JET, year of manufacture 2008, For applying the batch marking or MHD coding to the filled and sealed bottle, 5. Closer for plastic closures, make Zalkin type CA3/320NG, A closing station, Closures ...

Was used for sludge/water separation. In perfect working condition. Stainless steel drum and rotor. Sale without quarantee, as is where is.

Length: , mm Width: , mm Height: , mm Door painting trolley --------------- TLW 120: Price EUR 695.00 Painting trolley for doors incl. 2 pick-up forks - Door weight up to 120 kg - Door size max.2400x1200 mm Technical data Dimensions (min.) L x H x W 1330 mm x 910 mm x 610 mm Dimensions (max.) L x H x W 2600 mm x 910 mm x 610 mm Load capacity up to 120 kg Weight 24 kg --------------- TLW 200: Price EUR 985.00 Painting trolley for doors - Door weight up to 200 kg - Door size max.2800x1400 mm Technical data Dimensions (min.) L x H x W 1460 mm x 970 mm x 1100 mm Dimensions (max.) L x H x W 3360 mm x 970 mm x 1100 mm Load capacity up to 200 kg Weight 42 kg Extension set for TLW 200: Price EUR 190.00 for maximum door lengths up to 3600 mm --------------- Prices of the above-mentioned painting trolleys on request! plus packaging and shipping --------------- Further technical details as an attac ...

Technical data for the longitudinal brace: Shelving system: SSI Schaefer Type: R 3000 The scope of delivery includes: 01x Longitudinal brace, II. Designation: LV 3103 for field width: 994 mm Material colour: grey Weight | Pcs.: 1,12 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Used decanter made by Alfa Laval, model: NX 4850.

Used decanter made by Alfa Laval, model: Aldec 800.

Used decanter made by Alfa Laval, model: NX 944B.

A 3D metal printing machine Concept Laser GmbH in need of repair is available. Technology: Laser melting (SLM)/LaserCusing, working dimensions X/Y/Z: 250mm/250mm/280mm, layer thickness range: 20µm-80µm, max. scanning speed: 6m/s, focus diameter range: 50µm-500µm, laser power: 200W, printing materials: stainless steel/aluminum/titanium/nickel-based alloys/cobalt-chrome. Machine dimensions X/Y/Z: approx. 2450mm/2400mm/1650mm, weight: approx. 2000kg, laser cabinet dimensions X/Y/Z: approx. 600mm/1200mm/1200mm, weight: approx. 180kg, blower dimensions X/Y/Z: approx. 550mm/1450mm/550mm, weight: approx. 70kg. Including various printing materials such as titanium plates, steel plates and aluminum alloys. The machine has CF card defects and the communication between laser GUI and RCU breaks down. Documentation available. On-site inspection is possible.

Faltschachtelklebemaschine / Folder Gluer Lamina 1800GL WS Year 2016 - 1037516 Manual fed in-line folding, gluing and taping machine Format min. 70mm - max. 1800mm Nordson hotmelt Gluing Unit - 2 gluing hedas Speed 0-40 m/min PLC control with touch screen The Lamina Gluer is a manual fed in-line folding, gluing and taping machine. By the genius construction it is able to handle various sizes of different materials. The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc.

Vollautomatische Hochgeschwindigkeits Kaschiermaschine / Fully automatic Sheet-to-Sheet Laminating machine Lamina Blackline Auto 1110 Year 2009 - Serial-No. 23343509 Format max. 1100mm (width) x 1600mm (length) Sheet Width min. 350mm (13¾”) Sheet Length min. 350mm (13¾”) Feeder Capacity Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Speed 5000 sheets / hour Top Sheet 130 to 450g/m2 1 pts = 28,25g/m2 Bottom Sheet From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 Corrugated from 0,6 - 10 mm (0,016” - 0,39”) Registration Accuracy Up to 0,2mm (0,008”) Total Installed Power 5,0 kW Electrics 208 V, 3 phase, 60 cycle; or 400 V, 3 phase, neutral, 50/60 cycle; or Specified Air Requirements 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Machine size (widthxlength) 2050mm x 460mm - weight 2800kgs

The LAGUN FTV2 multi-purpose milling machine is a versatile machine tool that can be used in both single-part production and small-batch production. It impresses with its robust design, precise machining and a long service life. Equipment: - Manual and automatic operating modes - Fagor three-axis digital position indicator (DRO) - Coolant system - Lighting at the work area Condition: - The machines are in good technical and visual condition. Specifications: Longitudinal feed manual/automatic (X): 830/745 mm Transverse feed (Y): 406 mm Vertical feed (Z): 406 mm Drive power spindle: 3.7 kW Spindle cone/milling head mount: ISO 40 Spindle diameter: 85.70 mm Capacity: 127 mm Distance from spindle machine min./max.: 165/735 mm Spindle speed: 60 - 4,200 1/min Table size: 1,270 x 254 mm Max. table load: 200 kg T-slots: 3 x 16 T-slot spacing: 63 mm Weight: 1,100  ...

The LAGUN FTV2 multi-purpose milling machine is a versatile machine tool that can be used in both single-part production and small-batch production. It impresses with its robust design, precise machining and a long service life. Equipment: - Manual and automatic operating modes - Fagor three-axis digital position indicator (DRO) - Coolant system - Lighting at the work area Condition: - defective, gear wheel worn, milling head already dismantled, replacement of the gear wheel was no longer possible due to insolvency, spare parts costs according to the former operator approx. 1,500 EUR. Specifications: Longitudinal feed manual/automatic (X): 830/745 mm Transverse feed (Y): 406 mm Vertical feed (Z): 406 mm Drive power spindle: 3.7 kW Spindle cone/milling head mount: ISO 40 Spindle diameter: 85.70 mm Capacity: 127 mm Distance from spindle machine min./max.: 165/73 ...

A 2-roller Höfer glue spreader is available. Working width: 800mm, rollers: 2. On-site inspection is possible.

900 mm sanding machine for turned products. GENINI mod. LAR90 - Maximum working length 900 mm. - Automatic loader

1.0 pcs. Vertical press for use: SMC (Sheet Molding Compound) Manufacturer: LAUFFER Type: PRKP120 Year of Make: 1972 Pressing force: 120 tons Table; 1,200 x 1,000 mm Additional heated Table surface: 800 x 800 mm Installation height: 810 mm Stroke: 790 mm Opening: 1,600 mm

Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional

Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional

Heidolph Laborata 4001 complete with condenser and water bath, 0-270 rpm

CNC lathe Padovani BJ 1996 including the stainless steel tub

Electric motor, electric motor LAMMERSDrehstrom motor, power motorType 1TZ95012AA434AB4-ZBilform B3Size 200LMotor speed 2960 rpm. Current consumption 54 AmpereMotor power 30 kWNet connection 400 Volt, 50 Hz.Shaft diameter 55 mmShaft pin length 110 mmKeyway width in the shaft 16 mm- Foot motor with 4 mounting holes 19 mm, hole spacing 315 x 300 mmOverall length motor housing without motor shaft 620 mmOverall length motor housing with motor shaft 730 mmSpace requirement L x W x H 730 x 400 x 520

Static frequency converterManufacturer: GARBE LAHMEYER & Co. AGTyp SU3760.2aFZ231Year of manufacture: 1989Fabr. No.: A2K 60229 0001Nominal power 500 kVAStromart DNetching voltage 380 VoltInput frequency 50 HzInput current 760 Amp.Type power Input 760 Amp.Output voltage 380 VoltOutput frequency 50 HzOutput current 760 Amp.Type power output 760 Amp.- Control unit GARBE LAHMEYER Type AEB 60Dimensions cabinet (W x H x D) 2250 x 800/900 x 2550 mmTransport dimensions (W x H x D) 2430 x

Doka Load Spindle 70 Lower spindle (height-adjustable) for heavy shoring in combination with clamping nut. 8.75 kg EUR 29,13 Doka Heavy-duty screw jack 70 Bottom spindle (height adjustable) for heavy load-bearing tower in combination with Split nut. 8.75 kg EUR 29,13

Doka load spindle 70 top Upper spindle (height adjustable) for heavy shoring in combination with clamping nut. 9.20 kg EUR 23,04 Doka Heavy-duty screw jack 70 top Top spindle (height adjustable) for heavy load-bearing tower in combination with Split nut. 9.20 kg EUR 23,04

Lampertz Doku Data Safe PE12 Data Backup Cabinet Lampertz Doku Data Safe Data Backup Cabinet Locker insert Documentary Floppy Tray Shelf with slots Right stop side Fire protection class S 120 P according to EN 1047-1 2 hours of fire safety for documents and paper Resistance grade 1 according to EN 1143-1 Year of Make: 2005 Overall dimension Height: 1976 mm Width with hinge: 955 mm Depth incl. handle: 777mm Internal dimensions Height: 1714 mm Width: 734 mm Depth: 440 mm Weight: 850 kg More items - new and used - can be found in our shop! International shipping costs on request!

Travel X/Y/Z: 1300mm/900mm/1000mm, table dimensions X/Y: 2000mm/750mm, max. table load: 5000kg, rapid traverse: 6m/min. Machine dimensions X/Y/Z: approx. 3650mm/2700mm/2700mm, weight: approx. 9000kg, control: Heidenhain TNC 150. Documentation available. An on-site inspection is possible.

40,000 liter agitator tank / storage tank insulated from V2A Properties: Volume 40000 L Material V2A (AISI 304) 1.4301 Insulation 100 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Total height 6300 mm Cylinder height 4500 mm Diameter 3900 mm Number of feet 6 Description: Topsoil: Curved bottom 2 crane eyes CIP ball on the side Level measurement with socket 1/2" Agitator agitator decentralised with 4 paddle stages Manhole Ø DN 440 Breathing nozzle Ø 700 mm with condensation drain 2 x CIP Ball Subsoil: Flat bottom with small cone bottom at the front forward-drawn residual drain pipe with flanges DN80 6 tube feet with spherical plates - height adjustable with base plate

30,000 liter agitator tank / storage tank insulated from V2A Properties: Volume 30000 L Material V2A (AISI 304) 1.4301 Insulation 60 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Total height 6000 mm Cylinder height 3700 mm Diameter 3900 mm Number of feet 4 Description: Topsoil: Curved bottom CIP Ball Guiding Beam CIP Ball Sensor for level measurement Threaded Socket DN65 Stick Agitator Mixer with Propeller Manhole Ø DN 480 Ventilator DN 300 Tank cylinder: Tasting tap Subsoil: Cone base Outlet surround with disc valve DN80 Sensor for level measurement 4 profile feet with domes - height-adjustable with base plates

10,000 litre storage tank made of V2A insulated horizontal Properties: Volume 10000 L Total length outside 4300 mm Length inside 3150 mm Cylinder length 3150 mm Total height 2600 mm Diameter 2000 mm Material V2A (AISI 304) 1.4301 Surface marbled on the outside Surface inside 2B=IIIC ground Horizontal design Number of feet 6 Insulation 100 mm Description: Insulation 100 mm Tank crest: 2 connections DN 65 CIP Cleaning In front: Sensor for level measurement Flange DN 50 Manhole DN 500 round Sewage drain DN 150 with butterfly valve Remaining drain DN 50 + DN 65 Below: 6 trumpet feet fixed

1,000 litre water tank/ storage tank made of V2A Properties: Volume 1000 L Material V2A (AISI 304) 1.4301 Total height 2000 mm Cylinder height 1100 mm Diameter 1000 mm Weight 170 kg Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground

Material thickness range: 0.6mm-10mm, sheet width min./max.: 2x700mm/2x1000mm, sheet length min./max.: 500mm/700mm, max. production speed: 1000 boxes/h, registration accuracy: +/-1mm, machine dimensions X/Y: approx. 6200mm/2950mm, weight: approx. 1000kg. Includes a pressure belt. Documentation available. An on-site inspection is possible.

max. temperature: 800 Grad size of opening: Durchmesser 430 mm depth of chamber: 630 mm dimensions of the machine ca.: 2 x 1 x 1.6 m weight of the machine ca.: 530 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type: KUX750VAC Serial number: 12110 Year of construction: 2007 Bowl capacity: 750 litres Knife speed: variable, 60 - 3300 RPM Mixing speed: 150 RPM Bowl speed: 4, 7, 10, 14 RPM Power: 3 x 380V, 50Hz, 273kW Compressed air: 6 - 10 Bar Water: 2 - 6 Bar Dimensions: 4330 x 3700 x 3050 mm (open lid) Weight: 7900 kg With double lifter for 200L tote bins and unloader

x-travel: 4000 mm y-travel: 1000 mm z-travel: 1500 mm Control: Heidenhain 355 weight max.: 10 t head swivability: ° : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Welding dimensions: 1170x900mm, max. product height: 200mm, film: PO, PE and PVC, half-tube film, max. film roll dimensions: 1050x250mm, connected load: 23KW, length: 2640mm, width: 2850mm, height: 1220mm, weight: 600kg. Comes with documentation, shrink tunnel, two conveyor belts and film. The machine has been used very little, only ran for a few hours. An on-site inspection is possible, the machine is immediately available.

The scope of delivery includes: 01x Lightweight water hose Material: Polyvinyl chloride (PVC) Material color: black Diameter: 12.7 mm (1/2 inch) Length: 20 m Suitable for up to 200 psi (13.8 bar) Robust, 3-layer construction Weight: 2.60 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

length: 1000 x 600 x 300 mm table load: 300 kg total power requirement: 1,1 kW weight of the machine ca.: ca. 350 kg dimensions of the machine ca.: 1,30 x 1,00 x 2,65 m LACHNIT Tilting and Lifting Device Stainless steel column, welded steel container Container dimensions: 1000 x 600 x 300 mm Discharge height: 1.460 mm Control via push-button at column and pendant control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Net weight= 136 kg,

Laska Mixer -Type: ME 400 ZNV -Power: 7.5 kW -Capacity: 400 L -2 Z-type mixers -Vacuum pump -Tilting hopper -Voltage: 380 V 50 Hz 3N -External dimensions: 2700 x 1500 x 2650 mm -Including loading -Made of stainless steel -Condition: used in very good/overhauled/ready to work

Manufacturer: Morn Laser Condition : New Model: GH-S3015 GH-Series Type of Machine : High Speed Full Cover Fiber Laser Cutting Machine Condition : New Advantages: - High speed cutting efficiency - Safe and clean production - Zoned smoke exhaust system - High speed double platform exchanging Parameters: - Laser Power: 3000W / 6000W - Cutting Area: 3100 × 1600 mm Find more here - / Contact us at -

Manufacturer: Morn Laser Condition : New Model: MT-6000 N-6 Series Type of Machine : High Speed Tube Fiber Laser Cutting Machine Advantages: - Fast loading - High precision - Saves labor costs Parameters: - Laser Power: 3000W / 6000W - Tube Length: 6m / 9m Find more here - / Contact us at -

The Alfa Laval SMP Valve is a specialized valve used primarily in hygienic applications, particularly in the food, pharmaceutical, and biotechnology industries. Heres more information about the SMP Valve:, Key Features:, - Hygienic Design: The SMP Valve is designed to meet stringent hygiene standards and is typically constructed from stainless steel, making it suitable for applications where cleanliness is crucial., - Flow Control: It is used for controlling the flow of various fluids in processing systems, ensuring precise regulation and minimizing the risk of contamination., - Easy Maintenance: The design facilitates easy access for maintenance and cleaning, which is essential in industries where sanitation is paramount., - Robust Construction: Built to withstand demanding operating conditions, the valve is resistant to wear and corrosion, which contributes to its longevity and reliabi ...

Alfa Laval brazed heat exchangers are highly efficient thermal devices designed for transferring heat between two or more fluids without direct contact. Heres more information about them:, Key Features:, - Brazing Technology: The heat exchangers use brazing, a process of joining metals without melting them, resulting in strong and durable connections. This allows for compact designs and efficient heat transfer., - Compact Design: They have a small footprint compared to traditional shell-and-tube heat exchangers, making them ideal for applications with limited space., - High Thermal Efficiency: The design allows for excellent heat transfer performance, which can lead to reduced energy costs., - Durability and Longevity: The materials used are resistant to corrosion and wear, enabling the heat exchangers to withstand tough operational conditions., - Versatility: They can handle a variety o ...