la used for sale

Power cable, solar cable, fiber optic cable, fiber optic line, data cables, LAN cables, fiber optic cables -Manufacturer: Lapp Kabel, fiber optic cable -Type: Hitronic Torsion 8E 9/125 OS2 -Application area: indoor and outdoor -Length: 36 m -Price: complete -Dimensions roll: Ø 390/100 mm -Weight: 4,4 kg

Power cable, solar cable, fiber optic cable, fiber optic line, data cables, LAN cables, fiber optic cables -Manufacturer: Lapp Kabel, fiber optic cable -Type: Hitronic Torsion 8E 9/125 OS2 -Application area: indoor and outdoor -Length: 115 m -Price: complete -Dimensions roll: Ø 500/325 mm -Weight: 21 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1435 rpm -Shaft: Ø 28 x 57 mm -Construction: B5 -Protection class: IP 55 -Price: per piece -Number: 1 Stück -Dimensions: 365/273/H250 mm -Weight: 20 kg/piece

Hazard lights, night signs, flash lights, day and night signs, obstruction lights, signal lights -Manufacturer: lanthanum, obstruction light -Type: HF102DC -flashing -one piece available -Dimension: Ø 64 x 93 mm -Weight: 0.3 kg/piece

Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature limiter -Manufacturer: Landis & Staefa -Type: RAM142.0/1982 -Dimensions: 185/95/H80 mm -Weight: 0.3 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 70 rpm -Power: 0.18 kW -Construction: B3/B14 angle -Hollow shaft: Ø 18 x 78 mm -Protection class: IP 55 -with: brake -Dimensions: 345/123/H180 mm -Weight: 8 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive, thermal system -Manufacturer: Laird, Thermal Systems Thermoelectric Peltier module -Voltage: 24 VDC/3.4 A -Cooling power: 71 W. -Price: per piece -Number: 15 piece -Dimensions: 230/120/H150 mm -Weight 2.4 kg/piece

Frequency converter, frequency converter, drive converter, controller, variable speed drive, thermal system -Manufacturer: Laird, Thermal Systems Thermoelectric Peltier module -Voltage: 24 VDC -Cooling power: 71 W -Price: per piece -Number: 2 pieces -Dimensions: 230/145/H120 mm -Weight: 2.4 kg

Three-phase motor, electric motor -Power: 5.5 kW -Voltage: 400/690 V -Speed: 1450 rpm -Shaft: Ø 38 x 80 mm -Protection class: IP55 -Dimensions: 450/260/H330 mm -Weight: 43 kg

High-frequency ignition device, heater, gas and oil burners -Landis & Gyr Type: LGK16.322A27 -Voltage: 220-240 V -Frequency: 50-60 Hz -Dimensions: 100/100/H125 mm -Weight: 1.2 kg

High-frequency ignition device, heater, gas and oil burners -Landis & Gyr Type: LFL1.622 -Voltage: 220-240V -Frequency: 50-60 Hz -Price: per piece -Number: 2 pieces -Dimensions: 100/100/H125 mm -Weight: 1.2 kg

High-frequency ignition device, heater, gas and oil burners -Landis & Gyr Type: LGK16.335A27 -Voltage: 220-240 V -Frequency: 50-60 Hz -Dimensions: 100/100/H125 mm -Weight: 1.1 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper -Span width: max. 450 mm -Load capacity: 1,000 kg -Number: 2x available -Price: per piece -Weight: 8 kg

Three-phase motor, electric motor -Power: 0.75/2.5 kW -Speed: 1430/2860 rpm -Shaft: Ø 25 mm -Construction: B14 -Protection class: IP 44 -Dimensions: 390/195/H250 mm -Weight: 19.35 kg

Vacuum cleaner motor, suction turbine, wet vacuum cleaner -Manufacturer: Lamb Electric, suction motor from Gansow scrubber drier -Voltage: 24V -Number: 36x available -Price per piece -Dimensions: Ø 145/H175 mm -Weight: 2.3 kg/pc.

Vacuum cleaner motor, suction turbine, wet vacuum cleaner -from: scrubbing machine make Gansow -Number: 17x available -Price: per piece -Dimensions: Ø 145/H210 mm -Weight: 2.7 kg

Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -for: Harbs K2V folding machine -Max. Pressure: 70 bar -Motor: 0.75 kW 1400 rpm -Dimensions: 650/460/H600 mm -Weight: 60 kg

Electric motor, three-phase motor -Foot: damaged -Handover: as is -Power: 14 kW -Speed: 2890 rpm -Shaft: Ø 35 x 90 mm -Construction: B3 -Dimensions: 580/370/H390 mm -Weight: 104 kg

Electric motor, three-phase motor -Power: 2.2 kW -Speed: 1420 rpm -Shaft: Ø 25 mm -Construction: B5 -Protection class: - -Dimensions: 380/295/H250 mm -Weight: 38 kg

Screen keyboard, control cards for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: HAAS LASER -Control comes from a marking laser SLS Spectron Laser Systems -Type: Handling Gretag Laser 6211 -Q-BW-Driver: 68.11.40 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 530/500/H135 mm -Weight: 14 kg

Air cooler, evaporator, cold cell, industrial cooler, cooling unit, cooler, water cooler, cooling system, cooling -Manufacturer: Gretag Cooler -Cooling system comes from a marking laser SLS Spectron Laser Systems -Type: Handling Gretag Laser 6211 -for distilled water -Dimensions: 482/620/H177 mm 590/240/H705 mm -Weight: 37kg

Control cards for lamp-pumped lasers, marking lasers, control cards, input cards, controls -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -1x card type: Gretac SPT 68.12.00 -1x card type: Gretac GPR 68.11.90 -1x card type: Gretac SIP 68.11.87 -1x card type: Gretac IOF I 68.11.96 -1x card type: II 34.74.11 -1x card type: Gretac GSP 68.12.24 -1x card type: Gretac ASP 68.12.36 -1x card type: Gretac GHD 68.12.28 -1x card type: Gretac HSP 68.12.32 -1x card type: Gretac CKB 68.12.48 -1x: Positive Switching Regulator PSR 128E -1x: Positive Switching Regulator PSR 510E -Dimensions: 482/400/H620 mm -Weight: 29 kg

Control cards for lamp-pumped lasers, marking lasers, control cards, input cards, controls -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/400/H88 mm -Weight: 5 kg

Screen keyboard, control cards for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 Screen keyboard -3x cards type: EK-1 MPS 732/015 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 530/398/H290 mm -Weight: 18 kg

Power supply for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems MAINS SUPPLY -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/530/H220 mm -Weight: 15 kg

Gear motor, electric motor -Speed: 150 rpm -Power: 0.06 kW -Construction: B3 angle -Diameter hollow shaft: Ø 14 mm -Protection class: IP 54 -Dimensions: 285/120/H165 mm -Weight: 4.1 kg

Gear motor, electric motor -Speed: 138 rpm -Power: 0.06 kW -Construction: B3 angle -Diameter hollow shaft: Ø 14 mm -Protection class: IP 54 -Dimensions: 265/110/H165 mm -Weight: 3.7 kg

Three-phase motor, electric motor -Power: 9.5 kW -Speed: 1440 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 730/430/H375 mm -Weight: 163 kg

Electric motor, three-phase motor -Power: 15 kW -Speed: 1430 rpm -Shaft: Ø 42 mm -Construction: B5 -Protection class: - -Dimensions: 650/450/H360 mm -Weight: 158 kg

Electric motor, three-phase motor with 2 speeds -Power: 1.6/5.5 kW -Speed: 1445/2880 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: -pole changing -Number: 1x available -Price: per piece -Dimensions: 410/350/H300 mm -Weight: 48 kg

x-travel: 1050 mm y-travel: 330 mm z-travel: 475 mm tool taper: ISO 40 spindle turning speed range: 35 - 1800 U/min spindle motor: 5,5 kW milling head -swivable +/-: +/- 45 ° table-size: 1525 x 325 mm table load: 400 kg distance spindle /table: 142 - 617 mm feed - longitudinal/cross: 0-1300 / 0-390 mm/min rapid traverse longitudinal and cross: 2050 / 615 mm/min total power requirement: 9,3 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 2,4 x 2 x 2,3 m equipped with: - Universal milling head HURON 360° - Swivel control panel with Heidenhain digital display - right/left running of the milling spindle - Rapid traverse and hardened guideways in all 3 axes (X/Y/Z) - stable rotation/clamping table - automatic Central lubrication - Foldable milling/spindle protection Msachine comes from a training workshop and has been thoroughly tested The data for this ad was created w ...

Veneer cutting machine long fence LZ 2 Cutting length 3050 mm Height 45 mm Tension beam via manual control valve with compressed air The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

MANUFACTURER: Alfa Laval ( Tetra Pak ) Cold Milk Separator TYPE: CMRPX 714 HGV CAPACITY: 10.000 Liter per hour for cold milk skimming 20.000 Liter per hour for hot milk skimming and standardization MACHINE COMES WITH: TETRA ALFAST CREAM STANDARDIZATION UNIT ! APPLICATION: Cream separation from COLD MILK & WARM MILK Cream separation from WHEY Standardization

Alfa Laval Plate Heat Exchanger M15-MFM heat exchanger from 2007, complete (closed model), 1 available. 94 L, 10 bar Manufacturer: Alfa Laval Model No.: M15-MFM Type: Plate Heat Exchanger Serial Number: 30106-27946 Capacity [L]: 94 Pressure [bar]: 10

Alfa Laval Plate Heat Exchanger T20-BFG heat exchanger from 2008, complete (closed model), 1 available. 221 L, 10 bar Manufacturer: Alfa Laval Model No.: T20-BFG Type: Plate Heat Exchanger Serial Number: 30106-36399 Capacity [L]: 221 Pressure [bar]: 10

Cooling capacity: 67 kW (12/7 — 35°C) Year of manufacture: 2008 Type of refrigerant: R410A Refrigerant circuit: 1 pc. Compressors: 2 pcs. Sanyo (scroll) Number of fans: 3 pcs. Dimensions: 2.30+0.25x1.33x1.60 m. Weight: 690 kg. Condition: very good

max. speed: 8000 /h serial no.: L9-270 max. paper size: 490 x 340 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0166 Brand: LANDONIO LAR Model: LV 800 2-disc sander for wood modelling, aluminium modelling, various materials, custom furniture, nautical furniture Heavy cast iron structure Disc diameter mm 800 Table size mm 980 x 400 Table disc inclination upwards-downwards 45 degrees/45 degrees Motor Kw 4 Disc rpm 950 Built-in vacuum cleaner - Motor Hp 1 Suction mouth diameter mm 120 Overall dimensions mm 1520 x 1050 x 1350 h Weight kg 800

MAIN FEATURES: In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a bulit-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. TECHNICAL PARAMETERS: • only 3 persons per shift are required to operate the whole production process • production capacity: 500 - 1250 liters / hour • product  ...

Bench top autoclave LABOKLAV25 V, 25 litres ; - INTERNAL LABOKLAV 25 PRINTER ; - Tank 265x465 ØxD mm, outer dim. WxHxD 440x540x660, mm ; - Weight appr. 65 kg ; - Power supply 230 V-50 Hz ; - 20 programmes, all customisable, standard programmes according to version; - All LABOKLAVs are equipped with an external steam generator according to the principle of a dry stone (the heating elements are not in the water, the consumption of the energy consumption is reduced and the service life is increased); - They are also all delivered with a water condensation system at the drain. (pipe protection).

used centrifuge, separator

working width: 250 mm working length: 250 mm work height max.: 280 mm laser capacity in Watt: 400 Rofin travel -z axis: 10 - 1000 mm/s positioning accuracy: +/- 0,1 mm repeating accuracy: +/- 3,5 my capacity: 6,8 kVA Required air-pressure: 6-10 bar Type of gas: Schtzgas Stickstoff 5 bar dimensions of the machine ca.: 5,9 x 4,2 x 3 m range L-W-H: 2,44 x 1,63 x 2,36 m weight: 2 300 kg Electric 400 Volt: Software: Concept Laser Concept Laser M2 Cusing system for processing reactive and non-reactive powder materials. Design of process chamber, handling station, powder suction according to ATEX Directive II for flammable substances. Materials: steel, stainless steel + aluminum. Supplementing titanium against additional payment possible. Dynamic coating system with 3 different wiper blades. Peripherals and accessories: Rofin laser source - photo 4 Nitrogen generator (in the other room, photo  ...

Band width: 150mm; Tape length: 3000mm; Table size: 960mm x 352mm; Additional table: 330mm x 330mm; Grinding roller diameter: 2 pieces; Veneer grinding device: yes; Oscillation: yes; Swivel grinding unit: yes; Suction port: 140mm; Motor power: 3 kW; Machine length: 1900mm; Machine width: 900mm; Weight: 400kg;

Con-Evator PGT Vacuum Hopper Loader for conveying of free-flowing granules from a bag or bin to the intermediate hopper of the processing machine or another hopper.

Inv. Num. : 7114 Type: LP 100 CNC Producer: Laschet Partner Created: 2000 Parameters: Control system: FANUC Series 18-T Spindle diameter: 30 mm Travel X: 300 mm Z travel: 280 mm Length: 2800 mm Width: 1450 mm Height: 2000 mm Weight: 3200 kg Equipment: Bar feeder

Servo motor, electric motor, DC motor, stepper motor -Manufacturer: Berger Lahr, stepper motor servo motor -Type: RDM 599/50 -Shaft: Ø 10 x 30 mm -Dimensions: 130/85/H85 mm -Weight: 2.5 kg

LASM edge sander model LS - 1NT with 1 pad sanding belt unit, complete 3-wheel feed: Timed swab intervention Sanding belt blower Sanding belt size: 80 x 2450 mm. Belt articulation capacity: 135° Two-speed belt motor 7-14 Mt/sec. Pneumatic belt tensioner, mechanical oscillation CE standard machine

LAGUN GVM-4 SP incl. digital display Fagor incl. hydraulic vise incl. 3-jaw chuck incl. 10 tool holders incl. collets incl. 3 drill chucks Machine works perfectly Machine can be loaded by forklift

-Horizontal Packing Machine -Manufacturer: Lafer Packaging SRL -Model: Cosmic -400 volts -Year of construction: 2013

Manufacturer: Alfa Laval Type: P3000 Year of construction: 1980 Max. sludge density: 1.25 kg/dm Max. drum speed: 4000 rpm