l z used for sale

max. wheel diameter: 200 mm gear width: 140 mm max. module: 5 workpiece length - max.: 400 mm external diameter: min. 20 mm control: Siemens Sinumerik max. tool diameter: 270 mm Max. mould width: 50,8 mm Distance of shafts: min/max. 120/230 mm axial cross angle: -18 / -21 ° shaving wheel spindle turning speeds: max. 400 U/min weight of the machine ca.: 5,5 t dimensions of the machine ca.: 3,6 x 2,6 x 3,3 m Electric 400 Volt: workpiece magazine: The ZSE 150 scraping machine is used in small and medium series production as a universal scraping machine with a deburring unit on the back. Compact and easily accessible, all operating elements and the work area are easy to reach from the operators location. A large operator door provides unhindered access to the work area. This enables simple and quick conversion and tool changing processes. This machine is equipped with a pallet ring magazi ...

Atlas Copco ZT30 Air compressor Serial: AIF065086 2000, oil free air cooled screw compressor, operating pressure 8.6Bar, compressor output 69 l/s, motor 30Kw, comes with Ultrafilter International dryer model: HLALD0225 and Abbott air tank

x-travel: 1016 mm y-travel: 610 mm z-travel: 760 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1420 mm turning diameter over slide rest: . mm turning length: 3150 mm faceplate: 500 mm turning speeds: 176 U/min steady: 160 mm total power requirement: kW weight of the machine ca.: 15,68 t dimensions of the machine ca.: m Chip conveyor can be purchased as an option for €7,500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Urban 4 m bed milling machine SK40 against bid. Slightly used, was only rarely used! In February 2023, the machine was set up and put into operation by the company Urban and has only very few operating hours. As an accessory, the machine has a pick-up station including angular head drive. Bids from the Dossenheim location.

Manufacturer: GROSS Model : Z7400 Year of Manufacture: 2001 Type of Machine: Briquetting machine Power Output: 7.5 kW Nominal Voltage: 400 V Rated Current: 30 A Control Voltage: 30/24/211 V Fuse Protection: 10 A Hydraulic Operating Pressure: 280 bar Frequency: 50 Hz Operating hours are estimated at less than 100 hours and it also includes an unused 10,000 l oil tank. Find more here - / Contact us at -

MAX DIAM 250 MAX LENGHT 800

Manufacturer: Ziersch Model: ZT 820 Year of Manufacture: 2008 Type of Machine: Grinding Machine Certification: CE Marked Find more here - / Contact us at -

Qty. 1 Second-hand Sendzimir reversing cold rolling mill Mfc.: Sendzimir, completely revamped by IS2 Type: ZR23-25 Built: No information! Completely rebuilt: 2000 Stopped: 09/2022, still under power Strip width: 280 – 625 mm Thickness: Entry: 3.5 mm Exit: 0.05 mm Speed: 1st gear: 0 – 165 m/min. 2nd gear: 0 – 280 m/min. PLC GE FANUC – IC697CPX782

Screwed plate heat exchanger 300 KW, 60 sqm heat exchanger area

x-travel: 1700 mm y-travel: 800 mm z-travel: 890 mm table surface area: 2000 x 630 mm spindle taper: SK 50 spindle turning speed range: 35 - 3000 U/min spindle drive: 26 kW feeds longditudinal/cross/vertical: 6 - 5000 mm/min rapid traverse: 15 m/min table load: max. 6000 kg control: HEIDENHAIN control: TNC 360 total power requirement: 45 kVA weight of the machine ca.: 13 t dimensions of machine L x W x H: 5,2 x 2,78 x 2,95 m Accessories: vertical head swivelling in 2 planes with hydr. tool clamping, various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mm grinding width: 250 mm workpiece height: ca. 385 mm table surface area: 600 x 200 mm table speed -stepless-: 2 - 35 m/min table load capacity: max. 250 kg grinding wheel size: ø 225 x 25 mm grinding wheel hole diameter: 50,8 mm vertical feed autom.: 0,001 - 0,099 mm rapid traverse vertical: 600 mm/min cross feed of table continual: 10 - 1000 mm/min rapid traverse cross: 1000 mm/min total power requirement: 6 kVA dimensions of machine L x W x H: 2,65 x 1,70 x 2,28 m Accessories: DRO on Y-and Z-axis, magnetic plate 600 x 200 mm, grinding wheel with flange, wheel trueing attachment, wet grinding attachment with paper band filter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece diameter: 500 mm threading length: 1250 mm max. module: 10 min. module: 1 workpiece dia. over saddle: 250 mm spindle bore of workspindle: 102 mm quill stroke: 100 mm workpiece turning speeds: 0,0032 - 2,6 U/min feeds - rolls: 0,027 - 5,66 mm/WU feeds - longitudinal: 0,3 - 198 mm/min main drive: 4 kW swivel angle for work spindle: 90/120 ° diameter of hob: 150 mm milling width: 100 mm hob turning speeds: 45 - 560/900 U/min total power requirement: 9,5 kW weight of the machine ca.: 4,2 t Machine equiped with: - Heavy Duty Hob Head ApFw - change gears - Milling Head ApFF - Single Indexing Device ETE - Bush Rest - Coolant Tank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3500 mm turning diameter: 4000 mm centre distance: 16000 mm turning speeds: 0,71-33,5 U/min Rest: 2 tailstock quill taper MT: max. workpiece weight -without tailstock: 6300 kg max. workpiece weight between centres: 18000 kg Plate area: mm total power requirement: 31 kW weight of the machine ca.: 60 t dimensions of the machine ca.: 22x5x4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Maximum length of the piece: 1100 mm, Minimum length of the piece: 50 mm, Maximum diameter of the piece: 125 mm, Minimum diameter of the piece: 8 mm, Center height of tailstock above guide: 145 mm, Center height of tailstock above carriage: 65 mm, Centering hole taper angle: 60°, Larger diameter of centering hole cone: 50 mm, Diameter of smallest centering hole: 2 mm, Grinding spindle speeds: 45000 / 22 500 / 13 000 rpm, Hollow screw speed: 400 rpm, Stroke of the grinding wheel along the grinding surface: 0.75 - 5 mm, Diameter of grinding wheels: 15, 27, 48 mm, Weight approx.: 460 kg, Dimensions (length x width x height): 850 x 750 x 1850 mm

MODUL ZFWZ 3150/3 Gear hobbing machine max. wheel dia. 3150 mm min. wheel dia. 500 mm max. wheel diameter with outboard-support 1600 mm max. module 30 mm gear width 1000 mm max. helical angle 45 deg tangential adjustment 500 mm cutter length max. 440 mm diameter of cutter (hob) 350 mm table diameter 2400 mm table bore diameter 500 mm depth of hole 1100 m table load max. 30 t Accessories Dimnsions 6700x5400x4800 mm Weight 65000 kg

max. wheel diameter: 400 mm gear width: 275 mm max. module: 6 Overall size: 300x330x245 cm weight of the machine ca.: 5,5 t dist. cutter spindle - workpiece spindle: 40/265 mm hob turning speeds: 50-400 U/min Specification: Max wheel diameter: 400 mm Min module: 1 Max module: 6 Table diameter: 370 mm Max wheel diameter: -With counterstay: 340 mm -Without counterstay: 400 mm Max axial offset: 275 mm Max tangential adjustment: 100 mm Tooth helical angle: 45 degrees Max cutter diameter: 145 mm Max hobbing length: 170 mm Hob turning speeds capacity: 63-180 U/min Feeds infinitely variable axial: 0,2-10 mm/U Feeds infinitely variable tangential: 0,1-5 mm/U Radial for spur gears: 0,1-4 mm/U Radial for worm gears: 0,025-1 mm/U Rapid traverse axial: 500 mm/min Rapid traverse tangential: 250 mm/min Radial for spur gears: 400 mm/U Radial for worm gears: 100 mm/U Motor power: 7.4 kW The data for t ...

Measuring range X,Y,Z 1200,1800,1000 mm Software calypso Measuring head 5 axis Vast XXT

Key data: 160 , 8 , 1170

For sale is an Atlas Copco compressor 160KW Ser. No. AIF001037

Key data: 250 , 8 , 2322

For sale is an Atlas Copco ZR4 compressor Year of manufacture 1993 Bh. 98485 250KW Volume 1400-2322 m3/h Weight 4100kg

Technical specification, ZZS A1, FEATURE VALUE, POWER 17 KW, LENGTH 2000mm, WIDTH 1250mm, HEIGHT 4180mm, WEIGHT 700kg, zigzag separator, The Zig Zag Separator works based on weight differences. This highly efficient separator uses airflow to separate materials by weight. The zigzag design extends the falling path of the materials, providing a more homogeneous and accurate separation process. It is ideal for separating materials such as plastics and light metals from scrap metal. Our machine is designed to be integrated into production lines and offers maximum performance with low energy consumption. In addition, its compact design allows it to operate in a minimal space. The Zig Zag Separator offers an environmentally friendly solution with high efficiency and low running costs that optimizes your recycling process.

table length: 2000 mm table width: 1000 mm stroke height: 400 - 1010 mm weight max. in kg: 300 kg weight of the machine ca.: 220 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

C - bow is in good technical and optical condition

C-bow in very good technical and optical condition

ELECTRICAL SPECIFICATIONS   total power consumption: 57 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4900 mm   space requirements -front/back-: 2600 mm   total height: 2600 mm   total weight approx.: 2600 kg Washing medium: solvent-free basket/rack size     790 x  590 x  600 mm cabin dimensions    1200 x 1200 x 1200 mm useable volume       800 x  780 x  900 mm net weight of batch            ;     200 kg Attachments: Dosing unit DOSANTEC A763-168M buffer tank 100 ltr Waste water tank 75 ltr rotating spraying cross from top rotating spraying cross from bottom Drying device  ...

Press capacity: 315 ton Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton

Decanter Z4E-4/454 made of stainless steel by FLOTTWEG in 2004. Material Stainless steel Technical features Model Z4E-4/454 Year of manufacture 2004 Maximum speed 4200 rpm Maximum sediment density 1.4 g/cm³ Working temperature 0/100 ºC Documentation CE Certificate Maintenance Manual Operation Manual Drawings Electrical Diagrams Electrical Panel Manual Condition Inspected Made by FLOTTWEG

Decanter Z53-4/454 manufactured in stainless steel by FLOTTWEG in 2003. Technical features Model Z53-4/454 Year of manufacture 2003 Maximum speed 3250 rpm Maximum sediment density 1.3 g/cm³ Drum inner diameter 529 Discharge diameter 315 mm Seal material NBR Working temperature 0/100 ºC Drum motor 63 kW mm Screw motor 15 kW Equipment configuration Electrical panels Hydraulic power pack Slide gates Transport information Weight 5300 Kg Documentation CE Certificate Maintenance Manual Operation Manual Drawings Electrical Diagrams Electrical Panel Manual Condition Inspected Made by FLOTTWEG

Manufacturer: Gabelsatpler Zinken Neu, FREETEXT1: Länge 1300 mm, FREETEXT2: breite 120 mm, FREETEXT3: 520 mm Höhe <CRLF>Einschub,

Manufacturer: Weger Zuluftgerät, Type: ZL 2113, Year: 2013, Control: no, Kw output: 22, Heizmedium : Warmwasser, Temperatur vor-rücklauf: 70/90, Taschenfilter Typ: yes, Fresh air m³/h: 42000, Fresh air m³/h: 42000, Year :2013

Manufacturer: Weger Zuluftgerät, Type: ZL 30 S, Year: 2013, Control: no, Zuluftleistung m³/h: 6000, Kw output: 2,2, Heizmedium : Warmwasser , Temperatur vor-rücklauf: 90-70, Taschenfilter Typ: yes, Pumps: no, Year :2013

Manufacturer: Pilz Zentraleinheit C-P8-ZE-32, Type: 32 K, Model: 306097,

Manufacturer: Venyeskob Bandpalettentrockner 5500/24, Type: Ven Dry Vertcal Bandpalettentrockner 5500/24/2-Zonen, Year: 2020, Control: Venyeskob, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 400-5500, Min.-max. workpiece height in mm: 110, Working widht max mm: 1300, Number of pallets: 24, Palettenausmass LxBxH mm: 6100 X 1500, Lichte weite Paletten: 200, Tragfähigkeit Palette kg: 250, Palettenausmass LxBxH mm: 6100 X 1500, Heizmedium Warwasser: yes, Year :2020

Manufacturer: Venyeskob, Type: Zentrierrollengang, Year: 1995, Total metres approx.: 5, Working widht mm: 1300, Total hight mm: ca 980, Working widht mm: 1300, Year :1995

Manufacturer: Venyeskob, Type: Zentrierrollgang, Year: 1995, Total metres approx.: 5, Working widht mm: ca 1300, Total hight mm: ca 980, Adjustable: yes, Schräggestellte Rollen: yes, Stop straightedge: yes, Working widht mm: ca 1300, Year :1995

Manufacturer: Wolf Zuluftanlage mit Wärmerückgewinnung, Year: 2014, Control: SeparaterSchaltschrank, Zuluftleistung m³/h: 25000, Heizmedium : Warmwasser, Temperatur vor-rücklauf: PWW 90-70, Jalousieklappen: yes, Stellmotore: yes, Taschenfilter Typ: EU 3, Umrichtergesteuert: yes, Pumps: yes, Einspeisung Wärmerückgewinnung: yes, Kann erfolgen über Produktionsmaschinen: yes, Year :2014

Manufacturer: Berkmann <CRLF>Zuluft und Abluft<CRLF>Spritzstand, Year: 2009, Control: yes, Heizmedium : Gas, Heat recovery: yes, Electronic control board: yes, Number of spray booths: 1, Number of evaporation booths: 1, Abluftventilator m³/h: 14000, Underfloor exhaustion: yes, Supply air system: yes, Dachausführung: yes, Zuluftgerät kW Leistung 1: 232, Exhaust air device: yes, Ex-installed lamps: yes, Heat recovery: yes, Rückwärmezahl %: 38, max. Wärmerückgewinnung kW: 77, Overall heating output: 160, Year :2009

Manufacturer: Vakuumsaugtisch zum schleifen<CRLF>Plattenmaterial, Year: ca2000, FREETEXT1: Tischlänge mm 1700, FREETEXT2: Tischbreite mm 400<CRLF>, FREETEXT3: Saugerreihen 1, FREETEXT4: Drehbar stern, FREETEXT5: Aushebung, FREETEXT6: Höhe verstellbar1030 mm, FREETEXT7: Busch Vakuumpumpe, Year :ca2000

Manufacturer: Ziwo, Type: CL 11.10, Year: 1996, Work piece width min-max mm: 0 - 300, Min.-max. workpiece length in mm: 200, Min.-max. workpiece height in mm: 5 - 150, Wight approx. kg: 210, FREE TEXT: Beschickung, Year :1996

Manufacturer: Ziehtec, Type: Ziehklinge mitfahrend, Design left: oben und unten, Design right: oben und unten, Flat scraper: yes, Controllable: yes, Tracing by roller: yes, Pulling: ziehend und schiebend, Chain track/upper pressure: Anbaugerät, Run on the machine: IMA, Price per unit Euro: 2250,

Manufacturer: Zuckermann, Year: ca., Control: Hand, Moulding spindles: 3, Tool-fly circle: ca.150, Tools Spindle 1: yes, Spindel 2 Werkzeuge: yes, Spindel 3 Werkzeuge: yes, Moulding gauge operation: yes, Frässpindel U/min: 6000, Fräsbereich horizontal nach Schablone mm: yes, Kopierstift: yes, Spannbereich Werkstücke mm: 1600, Arbeitshöhe max mm: 120, Arbeitshöhe min mm: 10, Pneumatical pressure for keying: yes, Driven work piece conveyor: yes, Total power kW: ca.4, Vorschub Stufenlos: yes, die 4 Station ist als Schleifstation ausgerüstet, Year :ca.

MODUL ZFWZ 630 Gear hobbing machine Wheel diameter 630-710 mm Gear width 400 mm Module 1-10 Max. axial feeding travel 400 mm Max. tangential feeding travel (hob shift) 200 mm Max. helix angle 45 degrees Min. number of teeth hobbed 10 Min. number of teeth hobbed with indexing drive 5 Max. hob diameter 200 mm Max. hob length 250 mm Diameter of working table 580 mm Hole in working table 100-250 mm Depth of hole in working table 45-300 mm Distance center of hob to working table surface 175-575 mm Driving taper for hob arbor (step taper) 50 mm Hob speeds of universal hobbing head steeped 50-400 rpm Milling spindle speeds (infinitely variable) 40-400 rpm Power capacity 29 kW Machine dimensions 3380x2715x2250 mm Machine weight: 9200 kg

DC motor Stromag 70 kW, gearbox 2 x 960 Nm, with Coperion ZSB 70 side feed. The worm shafts and the end head are missing. Therefore, sales as spare parts carriers.

x-travel: 7.000 mm y-travel: 2.000 mm z-travel: 1.250 mm Control: Heidenhain iTNC 530 Internal cooling system: 15 bar milling head: Automatisch 0,001 spindle turning speed range: 4.500 U/min spindle drive: 37 kW taper ISO: 50 tool change unit: 60 Chip coveyor: Inkl. rapid traverse: 20/10 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m -CTS 15 bars -Controlled milling head (pos. Accuracy 0,001) -60 tools -37 kw spindle motor -rapid 20/10 m min -4500 rpm -iso50 -Renishaw RPM60 -chip conveyor -extra milling head (spare) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Zucchelli Forni Modular 2C2T Modular oven Serial: 2020E0860 2020, Stainless, two deck modular oven, chamber size 800mm x 600mm x 160mm, with adjustable temp and time controls, stone based, electric, 11.3Kw, mounted on mobile rack storage, 3Ph

x-travel: 10000 mm y-travel: 1500 mm z-travel: 2700 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Slot counter spigot outside inside