l z used for sale

Inv. Num. : 948 Type: LVH 2500 Producer: ŽĎAS Created: 1961 Parameters: Depth: 1800 mm Width: 3450 mm Height above ground: 4650 mm Weight: 85 000 kg Voltage: 220 / 380 V Mains frequency: 50 Hz Workforce: 2500 t Number of strokes: 20/min Height of the lifts: 500 mm Minimum plunger distance from the table: 900 mm Maximum plunger distance from the table: 1400 mm Table surface: 1050 x 1400 mm Plunger area: 1050 x 1200mm

Screw Diameter: 27 mm // Throughput: 100 kg/h

General SKU359W975 LocationBarneveld CEcheck MakeLeistritz Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck Water cooling9x DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm Feeding with metering screwK-tron Exchangeable segmentscheck Number of temperature controllers:1 Used oncarrier material Capacitymax 200 kg/h MaterialStainless steel, Stainless steel 2.4819 (Hastelloy C-276) General TypeZSE 27HP-PH-40D Mach.No.3899 Year of construction2010 With switchgearcheck Floorspace3,65 x 1,15 m Total height1,80 m Weight1200 kg Extra Specifications- This extruder has been used for testing carrier material. No API was produced/ used in this extru ...

General SKU359W976 LocationBarneveld CEcheck MakeLeistritz Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm MaterialStainless steel 2.4819 (Hastelloy C-276) General TypeZSE 27HP-PH-40D Mach.No.3778 Year of construction2008 With switchgearcheck Floorspace3,65 x 1,15 m Total height1,80 m Weight1200 kg Extra Specificationsthis unit comes with:-2x k-tron feeders.- control cabinet.- 3x temperature control units.- extruder barrel lift- spare partsPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedNew arrivalsDouble screw extrudersLeistritzIndustries > Food & Feed > Powdered fo ...

General SKU359W974 LocationBarneveld CEcheck MakeLeistritz Sizes Screw diameter18 mm Main Features Motor4.7 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter18 L/D40 Co-rotatingcheck Number of heating zones:8 Electric heating1,0kW (8x) Water coolingcheck AC-motor4,7 kW, 400/230 volt With variable speed drivefrequency converter Screw speed30-600 rpm Feeding with metering screwcheck Exchangeable segmentscheck Number of temperature controllers:7 MaterialStainless steel 1.4571 (316Ti) General TypeZSE 18PH-40D GMP-Design Mach.No.03396 Year of construction2005 With switchgearcheck Floorspace2,29 x 0,70 m Total height1,27 m Extra Specifications- This extruder has been used for testing carrier material. No API was produced/ used in this extruderThe scope consists of: Leistritz ZSE 18 PH-40D in GMP design with Lauer touc ...

This LEISTRITZ ZSE60MAXX-48D was manufactured in 2012. A co-rotating twin-screw extruder, its designed for high-performance compounding of advanced polymer materials, including biodegradable polymers. Adaptable to various extrusion processes, its ideal for bioplastics, masterbatch production, or specialty compounding. Contact us for more information about this machine.

General SKU347W893 LocationBarneveld CEcheck MakeAtlantic Zeiser Specified Features - Miscellaneous Motor5 KVA, 400 volt With jacketcheck General Typeiota System Mach.No.AZ09021000-B0803 Year of construction2011 Floor space1,20x1,20 m Total height2,0 m Weight370 kg Extra SpecificationsWith Omega print head, type 36i,&:nbsp:Adventech touchscreen control, Electronic control System, cool unit, 2100 watts,&:nbsp:rubber belt conveyor, dimensions 1130x60 mm&:nbsp:Cam reader.with electrical cabinet( as is)Oils & fatMiscellaneousConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOth ...

General SKU359W977 MakeLeistritz TypeZSE 27 HP-PH-40D Mach.No.3659 Year of construction2007 Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm MaterialStainless steel 2.4819 (Hastelloy C-276) General LocationBarneveld With switchgearcheck Floorspace3,65 x 1,15 m Total height1,80 m Weight1200 kg CEcheck Extra Specificationsthis unit comes with:- control cabinet.- 3x temperature control units.- extruder barrel liftPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedNew arrivalsDouble screw extrudersLeistritzIndustries > Food & Feed > Powdered foodsIndustries > Chemical > Agro ...

Fabricante IBARMIA Modelo ZVH 58 / L3000 Año 2004 CNC Heidenhain iTNC-530 Mesa Superficie de la mesa 3.600 x 1.050 mm. Ranuras en T 7 x 18 H 18 Distancia entre ranuras en T 125 mm. Distancia entre nariz husillo y mesa 25-366 mm. Peso máximo admisible en mesa 4.200 kg Recorridos y avances Curso longitudinal (Eje X) 3.000 mm Curso transversal (Eje Y) 1.000 mm Curso vertical (Eje Z) 860 mm Rango cabezal basculante (Eje B) ± 105º Rango giro (Eje C) ± 360º Avance rápido (X, Y, Z) 30 m/min Avance máximo trabajo (X/Y/Z) 30 m/min Avance rápido eje B 170 rpm Mesa rotatoria integrada Ø mesa rotatoria 1.000 mm. Ø máximo de rotación 1.400 mm. Cabezal Revoluciones cabezal 9.000 mm/min Cono cabezal ISO-50 DIN 69871-AD Potencia motor principal 28,5 kW Par motor principal 240 Nm Cargador automático herramientas Fabricante AITEK Tipo cambio RANDOM Posicion ...

General SKU011C013 LocationBarneveld MakeLeistritz Sizes Screw diameter110 mm Main Features Motor110 KW Inlet diameter110 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter110 mm L/D20 Counter rotatingcheck Number of heating zones:4 Electric heatingcheck DC-motor10-110 KW General TypeZSE-110 Mach.No.86.02.1822 Year of construction1986 With switchgear(as is) Sizes switchgear120 x 70 x 230 cm Floorspace4,7 x 1,4 m Total height2,2 mPowdered foodsAgrochemicalsPlastic & polymersDiscountCosmeticsAnimal feedOther feedDouble screw extrudersLeistritzIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersDiscountIndustries > Chemical > CosmeticsIndustries > Food & Feed > Animal feedIndustries > Food & Feed > Other feedExtruders > Double screw extrudersBrand > Leistr ...

Condition Used Brand Siemens Type ZR88-LA132SP4EW Voltage Volt 3 fase 400 volt Force KW 5,5 KW - 137 Nm Rotational speed RPM 384 RPM Shaft size mm 60 mm Flens pasrand 250 mm Version Eigen gewicht 170 kilo Length 110.00cm Width 35.00cm Height 35.00cm Related Products All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer Lenze type variable speed gear: 155-ZNA0-80-4 -Motor power: 0.75 kW -Speed range: 11.5-59 rpm -Speed: adjustable -height shaft axis: 120 mm -Drive shaft: O 25 mm -Construction: B3 -Number: 1 motor available -Dimensions: 390/400/H215 mm -Weight: 31.9 kg -Function tested

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear Lenze type: 155-ZNA0-80-4 -Manufacturer Motor Hanning type: 8F4-083 -Motor power: 0.75 kW -Speed range: 35-189 rpm -Motor: adjustable -Height shaft axis: 115 mm -Drive shaft: Ø 25 mm -Number: 1 piece of motors available -Price: per piece -Dimensions: 400/450/H220 mm -Weight: 31 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear Lenze type: 155-ZNA0-80-4 -Manufacturer Motor Dietz type: D48L -Motor power: 0.75 kW -Speed range: 21-118 rpm -Motor: adjustable -height of the shaft axis: 120 mm -Number: 1 motors available -Price: per piece -Drive shaft: Ø 25 mm -Dimensions: 390/400/H250 mm -Weight: 31 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear Lenze type: 155-ZNA0-80-4 -Manufacturer Motor Dietz type: DR80/b/4n -Motor power: 0.75 kW -Speed range: 12-67 rpm -Motor: adjustable -height of the shaft axis: 120 mm -Number: 1 piece of motors available -Price: per piece -Drive shaft: Ø 25 mm -Dimensions: 415/200/H400 mm -Weight: 35 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Lukas / Frieseke and Hoepfner, hydraulic pump hand pump -Type: ZPH 10/25 -Pressure range: max. 450 bar -Number: 12x hand pumps available -Price: per piece -Dimensions: 660/180/H200 mm -Weight: 6.9 kg/piece

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Lukas / Frieseke and Hoepfner, hydraulic pump hand pump -Type: ZPH 10/25 -Pressure range: max. 450 bar -Quantity: 2x hand pump available -Price per piece -Dimensions: 660/270 / H200 mm -Weight: 9 kg/pc.

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Flender, geared motor with brake -Type: Z41-A90L/4-L16N -Speed: 80 rpm -Power: 1.5kw -Construction: B3 -Shaft: Ø 30 x 60 mm -Protection class: IP 54 -Brake: 16 Nm -Dimensions: 620/190/H250 mm -Weight: 40 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, two-stage pump -Manufacturer: Lukas, hydraulic pump hand pump two-stage pump -Type: ZPH 10/18 -Pressure range: max. 500 bar -Quantity: 1x hand pump available -Dimensions: 800/180/H210 mm -Weight: 10.5 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Lukas, hydraulic pump hand pump -Type: ZPH 10/25 -Pressure range: max. 450 bar -Quantity: 1x hand pump available -Dimensions: 760/230/H320 mm -Weight: 10 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Lukas, hydraulic pump hand pump -Type: ZPH 2A/5 -Pressure range: max. 500 bar -Quantity: 1x hand pump available -Dimensions: 900/300/H200 mm -Weight: 15 kg

Screws, grub screws, for Bosch profile, construction profile, aluminum profile, aluminum T-slot profile, T-nut - Grub screws: Hex socket set screws with pin, 30 pieces -Thread: M12 left -Price/Quantity: 30 pieces -Price: 6 euros net for 30 pieces -Number: 4000 pieces in total -Transport dimensions: 600/400/H200 mm -Weight: 58 kg

Various old sawmill machines are available. 1) Costa Leonard twin-shaft saw, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Esterer WD step feeder, max. log length: 6000mm. 3) Esterer HD 30 saw frame, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Zeno drum chipper, drive power: 55kW. 5) Zimac board stacking machine, working length range: 800mm-3000mm. 6) Schicks steel chimney, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible.

General SKU104U1454 MakeZiemann Ludwigsburg Type2500 l Year of construction1986 Mounted on legscheck Pressure Working pressure5.4 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor0.75 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity2500 l Vessel sizesdia. 1400x1250 mm Dished bottomcheck Dished top sidecheck Top connections4x dia. 25 mm Outletdia. 35 mm Half coil jacketed(26 l.) Max. temperature140°C. With propellor stirrermake Ekato Motor0,75 KW, 380 Volt (Ex) With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4541 (321) General LocationBarneveld Floorspace1,6x1,5 m Total height3,3 m Weight800 kg ATEX designedcheckOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnology ...

Cylindrical cone fermenting tanks with capacity of 2x 625 ltr. + 120 ltr made by Speidel in 2021 & 2022. Tanks are self-standing on three legs and are made entirely of stainless steel. These tanks have a double welded jacket for cooling with two connection nozzles. They are suitable for fermenting and preserving beer, cider wine or for storing juice. Manufacturer Speidel Tank- und Behälterbau GmbH Manufacturers type FD-ZKG 120 ltr & 625 ltr Manufacturing year 2021 & 2022 Capacity 2 x 625 ltr + 120 lt Application fermenting & storage Number of tanks 2 x 1 Type Vertical indoor Diameter and height120ltr 550 x 1225 mm Diameter and height625ltr 820 x 2044 mm

We are selling here a refurbished cylinder head from M.A.N. . For: E2842 LE322,

General SKU026E105 MakeEvans Universal Ltd. Leeds No.2042 Year of construction1999 Mounted on framecheck Specified Features - Drying oven Drying oven:Zinc crucible furnace: (1x) Number of compartments:1 Internal diameter425mm Internal height450mm, Inlet dia. 300mm Gas heating, Burner make Riello, type 40 GS 5 (120 KW) General LocationBarneveld With switchgear(as is) Floorspace4,2x2,1 M Total height2,3 M Weight2300 KGConsumer wastePaints & coatingsDrying ovensPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherDiscountDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarDairyAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicEvans Lee ...

General SKU387U1057 MakeZoatec LocationBarneveld CEcheck TypeProzessbehaelter 600 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume600 Ltr. Motor4 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity600 Ltr. (max. 890 Ltr.) Vessel sizes1000x1350 mm Conical bottomcheck Dished top sidecheck With covercheck ManholeDia: 300 mm Top connectionsDN100, DN25, DN40 (2x) OutletDN80 With jacketcheck Half coil jacketedcheck Max. temperature0/100 °C With anchor stirrer(with scrapers) Motor4 kW, 220-242/380-420 volt, 1460 rpm Speed mixing shaft117 rpm With homogeniser(Zoatec / AZO LIQUIDS: IL2, 160 mm, 600-4000 rpm) Motor18,5 kW MaterialStainless steel 1.4404 (316L) With jacketcheck General No.103867-00 Year of construction2013 With sw ...

General SKU095T577 MakeZondervan Sneek No.S-2109-01 Year of construction1989 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket1 Bar Main Features MaterialStainless steel Volume100 Ltr. Motor1.5 KW Specified Features - Tumbler mixer Tumbler mixer(1x) Capacity100 Ltr Diameter660mm Cylindrical length420mm Inletdia. 270mm Outletdia. 50mm With jacketcheck Max. temperature200 Degr. C. With motor1,5 KW, 220/380 Volt Speed mixer± 27 Rpm MaterialStainless steel 1.4401 (316) With jacketcheck General With switchcheck Floorspace1,5 x 0,8 m Total height1,4 m Weight430 kg Extra SpecificationsThe double jacket on this machine can only be used for cooling or heating, before or after the &:nbsp:turning process. Not during! The same applies to the vacuumTea, herbs & coffeeTumbler mixersZondervanIndustries > Food & Feed > Tea, he ...

General SKU117W606 MakeZeppelin Metallwerke No.7187 Year of construction1975 Mounted on legscheck Specified Features - Stainless Steel Reactor Material finishMirror polished inside With jacketcheck Pressure Working pressure40 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume19370 Ltr. Motor55 KW Specified Features - Stainless Steel Reactor Reactor(1x) Capacity19.370 Ltr Vessel sizesdia. 2300x5240mm Dished bottomcheck Dished top sidecheck Manholedia. 450x350mm (oval) Top connectionsdia. 100mm + 2x dia. 80mm + 2x dia. 60mm Outlet(no bottom outlet) With jacket(1750 Ltr) Max. temperature120/160 Degr. C. (vessel/jacket) With paddle stirrermake Ekato Motor55,0 KW, 380 Volt (Ex) Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) General LocationBarneveld Floorspace2,6x2,6 M Total height± 7,5 M (without legs) Weight19. ...

Inv. Num. : 9233 Type: LUD 500/2500-F1 Producer: ZDAS Created: 1975 Parameters: Compressive force: 500 t Maximum stroke rate upper table: 20 1/min Ram stroke: 315 mm Main motor power: 55 kW

A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx.  ...

Grinding width 950 mm Ce version V400/50 1 belt combi unit design Steel roller for calibration  Grinding bug selection from the control panel Sanding shoe selection from the control panel  Sanding Pad Control On/Off FOX500KRT Electronic table positioning from the grinding table  Entrance and exit table extensions Moving carpet centering 

Workpiece return / return Ligmatech Type ZHR 15/13/L Year of Make: 1994 CE with 2 divided conveyor belts, each approx. 3 m + 2 m long was used on an edge banding Holz-Her 1426 year 98 Workpieces can be turned to the operator with 90° rotation or without rotation, the rotation can be switched off. Automatic rotation according to the plate size, the Plate size is recorded by sensor. Different part dimensions can be automatically can be controlled. Also suitable for transporting parts to the next workplace.

: gebraucht : 2005 : 4541 : prompt, Zwischenverkauf v : China : 5700 € : 1 : 40 - 1.300 U/min : ISO 30 : 465 x 230 x 380 mm : 1000 x 280 mm : 2.2 kW : 1400 mm : 1300 mm : 2200 mm : 1120 kg : 90 ° : 115 - 1.750 (115, 230,290 U/min Milling head rotatable and swivellable +/- 90° with manual quill 120 mm travel range Spindle sleeve feed takes place via a turnstile or with the fine feed by means of a handwheel Spindle head 350 mm manually traversable Max. drilling capacity 30 mm Manual tool clamping vertical/horizontal by means of tightening screw Automatic feed in X Axis,(8) 12 - 370 mm/min Coolant unit Chip tray Lighting 1x Collet chuck set 1 Stk Drill chuck with mounting 4 Milling cutter holders Does not comply with the German UVV &, Austrian AMVO BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST ...

pressure:500 t distance between columns:2240 mm stroke:1180 mm distance table/ram, max. stroke up, adjustment up:1800 mm table surface area:2050 x 1800 mm pressure of drawing cushion in table:250 t stroke of drawing cushion in table:380 mm drawing cushion surface in table:1800 x 1200 mm pressure of drawing cushion in ram:122 t stroke of drawing cushion in ram:200 mm drawing cushion area in ram:1800 x 1200 mm ram surface:2215 x 1800 mm table height over floor:500 mm speed down:400 mm/s speed up:10 - 400 mm/s working speed:10 - 100 mm/s depth of the foundation:3,0 m power requirement:122 + 75 + 64,5 kW weight:110,0 t Dimensions (WxDxH):3,6 x 2,2 x 8,5 m height over floor:6,8 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table and ram:hydraulic

Ex-lights for painting rooms: used 45-degree luminaires, recessed wall lamps, room lamps. with 2 or 3 or 4 x 58 W fluorescent tubes, for installation in painting systems. Please ask.

Description Item #8772 – POT FILLING LINE - Line Filling Chocolate Cream/Paste into Pot with Toy Currently producing 18gramme Pots. including: MONDINI Model A/C Tray/Pot Denesting System, LIVETECH Automatic System to insert spoon into pot, Model LSS, with PESCE GROUP MP10 Product Hopper & Elevator Feeder, SARG STM087 Automatic Toy Insertion Machine, to place toy into pot/tray. MONDINI Model VF/SPE Cream/Paste Dosing Unit into the pots MONDINI Model C/T Pot/Tray Lid Thermosealing Unit CICRESPI Model 1602056 Ink Jet Coding Unit LIVETECH Model LSS/LA19947 X-Ray Inspection machine End of Line Belts for packing. line will include the Mould for the Pot/Tray and the Mould for the Spoon

This Concept Laser M2 cusing 3D Printer was manufactured in the year 2015.

Features Volume 53800 L Material No. V2A Operating pressure 2 bar Working temperature 20 C Total height 10870 mm Diameter 3260 mm

Features Volume 47100 L Max. operating overpressure 2 bar Operating temperature 20 °C Weight 4020 kg Diameter 3000 mm Total height 10330 mm Outer diameter 3210 mm With insulation and heating/cooling jacket

Jump pads, crack rescue unit System Lansang, used Size 1, type 10 Manufactured by Ziegler not tested without pressure bottle Price: 500.00 Excl. 19% VAT

Laser marking laser marking system, Manufacturer GSI Lumonics Type XYMark, consisting of laser and suction. Geraet untested More information on request Special price

Light curtain Photocell Make: Leuze Electronic Type: SD4R30-1050E 4 pairs, 4x receivers, and 4x transmitters Condition: used but fully functional Only to traders is sold. All information without guarantee

Max length 8,000 mm Maximum turning diameter above wagon 1,250 mm Max vault over guides 1,650 mm Maximum turning diameter under spindle 2,000x700 mm Displayed – two axes

Maximum turnerable diameter: 1040 mm Turning diameter above the wagon: 620 mm Maximum workable length: 5200 mm Spindle power: 40 kW CNC ECS Optical line measurement system Maximum flow between tips: 10 tons Machine complete with chip evacuator, 4-position hydraulic turret, safety shelters in compliance and spindle 3-jaw hydraulic self-centering AUTOBLOCK; Various accessories available (tool case, stretchers, lunettes...) EC 2018 remarking possibility

From a current recycling we offer you an exclusive lens set. These are 3 CANON lenses "rehoused" by TLS True Lens Services. In detail, they are: 20mm nFD f/2.8 (1990) Serial Number 43174 24mm FD 1:1.4 L (1983) Serial Number 18574 35mm nFD 1:2 (1979) Serial Number 15437 The serial numbers were queried and confirmed from TLS. Year of manufacture: see brackets Condition: good Asking price: VHB Factory Price: Location: 10553 Berlin Equipment / accessories / other information: Asset Manager: M. Vorkötter Phone: 0202-25727-3152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. The sale is without warranty Subject to prior sale

Machine light, machine light, work area light, system light, compact light, switch cabinet light -Manufacturer: steel, compact luminaire with glued-on escape sign -Type: C-LUX 6500/1081 -Voltage: 230 V -Fluorescent lamp: 1x 8 watts -Dimensions: 445/110/H190 mm -Weight: 2.1 kg

Main technical data: Center height: 560 mm Distance between centers: 5000 mm Bar passage: 105 mm The lathe is in good condition, being cleaned and visible at Ns. site.