l z used for sale

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, gear motor -Type: ZG2 BMREB 90L4-8 AF -Speed: 100/50 rpm -Power: 1/0.6 kW -Design: B5 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Dimensions: 585/200/H250 mm -Weight: 40 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Hawe, hydraulic cylinder type PS 30/20 Z1143 -Stroke: 300 mm -Piston rod: Ø 20 mm -Hole: Ø 20 mm / distance 530 mm -Number: 1x cylinder available -Dimensions: Ø 62 x 570 mm -Weight: 4.9 kg

Thermal system, fan heater, heating elements -Manufacturer: Ziehl-Abegg, axial fan, axial fan, heating fan -Axial fan: type DADL 350/6 -Power: kW -Dimensions: Ø 470 x 245 mm -Weight: 9.1 kg

I sell the double knife veneer shears Josting ZFS 2800, built in 1997. Cutting length 2810mm. Cutting height 80mm. Cutting width 20-470mm. Very good condition. Available soon.

Reamer, twist drill, drill bit -Manufacturer: Werkö, twist drill Ø 66.0 mm -Recording: MK5 -Type: Two-cutter 66.0 x 630 HSS -on request: different sizes/quantities available from additional stock -Transport dimensions: Ø 66 x 780 mm -Weight: 10.6 kg

servo motor, electric motor, DC motor, stepper motor, stepping motor, compact asynchronous motor -Manufacturer: phytron, stepper motor type ZSS 52-200-2.5 25:1 -Manufacturer gearbox: Gysin type GPL 052-2S/25-1 i 1/7 -Dimensions: Ø 82 x 185 mm -Total weight: 2.9 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 560 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: 80, see photos -Weight: 11 kg

LISTING ID: 22741 BRAND: MASSON MODEL: ZFW (MM) 12000 C RATIO: 1:2,747 POWER: 1369 kW (1835 bhp) 1800 rpm WEIGHT: 2530 DIMENSIONS: 110 x 148 x 143 (h)(cm) HS CODE: 84836080

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: blank Ø 460 x 5 mm -Inside: Ø: 50 mm -Bolt circle: Ø 100 x 18 mm -Number of teeth: 54, see photo -Weight: 5 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 635 x 6 mm -Inside: Ø: 80 mm -Bolt circle: Ø 120 x 22 mm -Number of teeth: 70, see photo -Weight: 10 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 630 x 6 mm -Inside: Ø: 80 mm -Bolt circle: Ø 120 x 23 mm -Number of teeth: 70, see photo -Weight: 10 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 630 x 6 mm -Inside: Ø: 80 mm -Bolt circle: Ø 120 x 22 mm -Number of teeth: 70, see photo -Weight: 9 kg

ball valve, ball valve internal thread, metal ball valve -Manufacturer: Pekos, 2/2-way metal ball valve stainless steel unused -Type: K806 SGSGV -Size: 1 -Number: 4x ball valve available -Price: per piece -Dimensions: 235/80/H140 mm -Weight: 3.2 kg/piece

Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Sprocket: 2 pinions, 3/4 inch 14 teeth -Diameter: 93 mm -Shaft mount: inner Ø 40 mm -Dimensions: see photos -Quantity: 70x sprocket available -Price: per piece -Total dimensions: Ø 93 x 80 mm -Weight: 1.5 kg/piece

Aluminium Z-conveyor belt incl. substructure Horizontal range 1,200mm (customizable) Rising range 3,000mm (customizable) 2nd horizontal range: 1,200mm (customizable) Angle in the bend 45 degrees each Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable (can be moved) Conveyor belt width 700mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 80x50mm T-65Studs - 150mm 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is currently ap ...

Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Duplex sprocket: 1 inch 12 teeth -Type: 20B-2 1 1/4 x 3/4 -Shaft mount: inner Ø 50 mm -Dimensions: see photos -Total dimensions: Ø 138 x 80 mm -Weight: 3.8 kg.

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: ABW, live center -Type: ZNB 204 -Recording: MK4 -Dimensions: Ø 100 x 215 mm -Weight: 3.5 kg

Aluminium Z conveyor belt incl. mobile substructure Horizontal range 800mm (customizable) Rising range 2,000mm (customizable) 2. Horizontal range 800mm (customizable) Angle in the bend variable, infinitely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 0.55KW ( customizable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 Cleat - 400mm pitch 2-layer particularly transversely stable The delivery time of an individual system is currently approx. 3-4 weeks, depending on the production effort. Our core competence lies  ...

gear, gears, gear shaft, pinion shaft -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 42 mm / 14 teeth -Tooth width: 83 mm -Dimensions: see photo technical drawing -Number: 9x gear shaft available -Price: per piece -Total dimensions: Ø 42 x 220 mm -Weight: 0.9 kg/piece

dividing head, dividing head, gear, gears, lathe -Gears: 4 pieces -Teeth: 58/54/36/34 -Tooth width: 18 mm -Shaft mount: Ø 26 mm -Dimensions: see photo parts list -Shipping/Price: complete -Total dimensions: Ø 90 x 43 mm -Weight: 1.0 kg

dividing head, dividing head, gear, gears, lathe -Gears: 3 pieces module 1.5 -Teeth: 91/60/48 -Tooth width: 9 mm -Shaft mount: Ø 26 mm -Dimensions: see photos -Shipping/Price: complete -Dimensions: Ø 140/93/ 75 mm -Weight: 0.5 kg/total

dividing head, dividing head, gear, gears, lathe -Gears: 3 pieces module 1.5 -Teeth: 48/45/38 teeth -Tooth width: 16 mm -Shaft mount: Ø 28/24 mm -Dimensions: see photo parts list -Shipping/Price: complete -Dimensions: Ø 75/70/60 mm -Weight: 1.1 kg/total

gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 67 mm / 30 teeth -Shaft mount: inner Ø 36 mm -Dimensions: see photo technical drawing -Quantity: 1x gear shaft available Total dimensions: Ø 67 x 45 mm -Weight: 0.4 kg

dividing head, dividing head, gear, gears, lathe -Gear: 87 teeth module 1.5 -Tooth width: 17 mm -Shaft mount: Ø 28/23 mm -Dimensions: see photo parts list -Number: 4x gear available -Price: per piece -Dimensions: Ø 134 x 17 mm -Weight: 0.3 kg/piece.

dividing head, dividing head, gear, gears, lathe -Gear: 87 teeth module 1.5 -Tooth width: 14 mm -Shaft mount: Ø 28/23 mm -Dimensions: see photo parts list -Number: 2x gear available -Price: per piece -Dimensions: Ø 134 x 17 mm -Weight: 0.3 kg/piece.

Flame cutting machine, torch, oxy-fuel cutting machine, cutting torch, welding torch, hand cutting torch, welding set -Manufacturer: Zinser, Burner set in a metal box -Burner sizes: No. 00 to No. 4 (max. 9 mm) -Cutting torch: A -Accessories: see pictures -Dimensions case: 320/200/H65 mm -Weight: 2.8 kg

Cutting diameter 220 mm Saw blade length: 2450 x 27 x 0.9 mm Colour: grey Total power requirement: 1.2 kW Saw band width: 0.9 mm Cutting speed: 35 + 70 m/min Cutting range at 90 degrees: around 220 mm Cutting range at 90 degrees: square 220 mm Cutting area at 90 degrees: flat 230 x 185 mm Cutting range at 60 degrees: square 90 x 90 mm Cutting range at 45 degrees: around 150 mm Cutting area at 45 degrees: square 150 x 210 mm Machine No. 4777230

Electric motor, three-phase motor -Manufacturer: Wolf, electric motor type 1LA766-4AA60-ZN00 160L -Power: 15 kW -Speed: 1460 rpm -Shaft: Ø 42 x 110 mm -Design: B3 -Protection class: IP 55 -Dimensions: 590/315/H360 mm -Weight: 83 kg

Cardan shaft, cardan shaft, cardan joint shaft, drive shaft -PTO adapter: unfortunately without exact type designation -Art.No.: 11.059359 -PTO shaft: Ø 47.5 mm -Dimensions: see photos -Number: 2x shaft available -Price: per piece -Total dimensions: Ø 68 x 455 mm -Weight: 4.7 kg/piece.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Zangheri & Boschetti B23 K dowel drill with swivel head Masch. Ref. K 74590 21 spindles Weight 506 kg The machine is in good condition, ready for operation. Subject to changes, errors and prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Gear, gears, gear shaft, pinion shaft, spur gear, spur gear, hollow ground gear -Gear: spur gear with hollow ground 63 teeth -Shaft holder: inner Ø 40 x 45 mm -Dimensions: see photos -Dimensions total: Ø 134 x 60 mm -Weight: 1.8 kg

dividing head, dividing head, gear, gears, lathe -Gear: 70 teeth module 1.5 -Tooth width: 12 mm -Shaft mount: Ø 20 mm -Dimensions: see photo parts list -Quantity: 1x gear available -Dimensions: Ø 108 x 12 mm -Weight: 0.5 kg.

Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Duplex sprocket: 1 x 17.02 mm 57 teeth -Diameter: 475 mm -Shaft holder: inner Ø 90 x 90 mm -Dimensions: see photos -Quantity: 1x piece available -Dimensions total: Ø 475 x 90 mm -Weight: 62 kg

Fan filter, fan array, air cooler, control cabinet fan, filter fan, cabinet cooler, axial fan -Manufacturer: Shen Zhen, axial fan type FP-20060EX S1-B -Voltage: 220-240 V / 65 W -Number: 5 fans available -Price: per piece -Dimensions: 200/200/H60 mm -Weight: 1.4 kg

Crane fork, loading fork, load fork, pallet fork, pallet crane fork, lifting equipment, roller lifter -Crane fork: with adjustable weight compensation -Type: Hoist 630x475 -Load capacity: 250 kg -Tin length: 490 mm -Usable height: 610 mm -Dimensions: 635/520/H795 mm -Weight: 21 kg

Reciprocating saw, dovetail saw, tiger saw, saber saw -Manufacturer: Flex, reciprocating saw with carrying case -Type: SK ZSK 602 E -Nominal power input: 1000 W -Stroke rate: 700 - 2400 /min -Dimensions: 620/260/H110 mm -Weight: 8.6 kg

Carcass clamp Grass ZMG-P Year of manufacture 2005 Weight 24 kg The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Year of manufacture: 2024, Connector size: 4 Cardan, Technical condition: very good, Visual appearance: very good, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whichever you prefer., , Want to visit us? Yes, please!, , Our doors are open Monday through Friday from 7:00 a.m. to 4:00 p.m. On Saturdays, you are welcome by appointment.

tapered roller bearings -Weight: 3780 g -Outer diameter: 180 mm -Width: 34 mm -Inner diameter: 100 mm

Spherical roller bearings, self-aligning ball bearings -Bore: Ø 80 mm -Outer diameter: 140 mm -Width: 33 mm -Weight: 2.1 kg

Brand Armatec Bystronic Type ZLD 250 Category Rigid Ventouse Piston Serial Number 203019/1-2 Construction year 2003 Weight 50kg Assets 250kg Air pressure 6 bars

Cylindrical roller bearings -Outer diameter: 140 mm -Width: 33 mm -Inner diameter: 65 mm

Tenon and slotting machine, tenon cutting machine, tenon cutter, slotting rotor, tenon cutting and slotting machine -Recirculating rotor: 3 positions -Length stop -Workpiece tension -Dimensions: 1400/800/H1500 mm -Weight: 560 kg

Ball valve internal thread -Internal thread: 2 -Full bore, solid sphere -Quantity: 195 pieces in stock -Packaging unit: 12 pieces -1 carton at: 84.00 euros -Price shown: piece

rand Zwick/Roell Type Material testing machine Chassis number FS3396 Length mm 1200 Width mm 700 Height mm: 2000 Transport dimensions L x W x H 2.5 x 1.2 x 2.0 Control type Manually operated Documentation No Instructions No Electrical diagram No Photos/film available: To follow

Thread cutting machine with Stehler jaws, thread cutting head -Hole diameter: 190 mm -Size: 1/2 - 2 inches -Weight: 130 kg

Geared motor, electric motor, electric geared motor, geared motor for stop -Speed: 7.1/320 rpm -Power: 0.16/3 kW -Design: B5 -Shaft diameter: 30 mm -Protection class: IP 54 -Weight: 40 kg

Geared motor, electric motor, electric geared motor, geared motor for stop -Speed: 7.1/320 rpm -Power: 0.16/3 kW -Design: B5 -Shaft diameter: 30 mm -Protection class: IP 54 -Weight: 40 kg

Inv. Num. : 7770 Type: KFU 3000 Producer: Zayer Created: 1990 Parameters: Operating system: HEIDENHAIN TNC 415 B Table length: 3000 mm Table width: 1000 mm Maximum table load: 10000 kg Max. Speed: 3000 1/min Axis X: 2700 mm Axis Y: 1000 mm Axis Z: 1000 mm Machine dimensions: 4000 x 2500 x 2800 mm Weight: 18600 kg Equipment: Staples (approx. 40 pieces) Vises (2 pieces) Angle (2 pieces) Clamping Blocks (2 pieces)