l v d used for sale

General SKU034F278 LocationBarneveld MakeLeiblein GmbH Hardheim TypeIR-Verdampfer IR-T 1200-3000 E No.104-0001 Main Features MaterialStainless steel Motor0.37 KW Surface11 m2 Specified Features - Roll dryer Roll dryerInfrared-drying drum/evaporator (1x) Roll surface11 m2 Roll sizesdia. 1200x3000mm With knife dischargecheck With variable speed drivecheck Roll speed0,1-1,0 Rpm With jacketcheck Motor0,37 KW, 230/400 Volt MaterialStainless steel 1.4301 (304) Information Year of construction2003 Mounted on frameElectric heating (27x 8 KW) With switchgearcheck Floorspace5,6x1,5 M Total height2,6 M Weight3500 KGDiscountRoll dryersLeibleinDiscountDryers > Roll dryersBrand > Leiblein What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ...

General SKU050C396 MakeEdak AG Dachsen No.1362 Year of construction1993 LocationBarneveld Specified Features - Tumbler dryer Material finishPolished inside Material Jacket materialStainless steel Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume500 Ltr. Tumbler dryers Double cone tumbler dryer(1x) Capacity1145 Ltr, Useful capacity 500 Ltr Diameter1300mm Cylindrical length350mm Conical length775/600mm Inlet/manhole dia. 500mm Outletdia. 300mm With jacketcheck Max. temperature-30/+200 Degr. C. Motor± 0,75 KW MaterialStainless steel 1.4435 (316L) Information Floorspace3,3x2,5 M Total height1,6 MDiscountTumbler dryersEdak DachsenDiscountDryers > Tumbler dryersBrand > Edak Dachsen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new - ...

On offer is a flour storage and dosing system from professional bakery production, used. It is an interconnected industrial plant for the storage, dosing and weighing of flour. The plant is designed as a functional system and is suitable for bakeries, food production and industrial dough production. Extensive documentation available (including manufacturer's documentation, explosion protection documentation). Plant components: - 3 flour silos (REIMELT/ Daxner) outdoor area, metal version) - 2 REIMELT flour dosing and weighing systems - Hoppers, dosing devices, discharge units - Pneumatics, pipes, valve technology - Weighing units and controls Modernization: Extensive technical overhaul and investment in the plant (piping, components, etc.). The plant is currently located at our customer's site in Pasewalk and is being sold due to restructuring. A viewing is expressly recom ...

pressure:100 t distance between columns:1180 mm stroke:1 - 120 mm no. of strokes:90 /min distance table/ram, stroke up:470 mm table surface area:1100 x 700 mm table height over floor:800 mm side window:400 mm ram surface:740 x 350 mm ram adjustment:100 mm power requirement:37,0 kW weight:11,0 t dimensions (WxDxH):2,3 x 2,0 x 3,5 m knuckle-joint press:hydraulisch angetrieben T-slots in table and ram acc. to specification:auf Anfrage foundation pit:nicht erforderlich

CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Duo With two tool interfaces, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER25, ER 32, saw blade flange 30 mm, sawblade dia. max. 180 mm or modular

AT-Motor Lombardini Type=LDW1204 general-overtaken in exchange.Deutz-Type=F4M1008 email= info@miw-zeven.de

Motor Lombardini LDW903,Deutz-Type=F3M1008 general-overhauled engine in off-exchange Email=info@miw-zeven.de

Deutz engine in replacement type=BF4M1008 Turbo refurbished Lombardini Type= LDW120T Turbo Price only on request email=info@miw-zeven.de

Altas Motoren im Austausch sofort ab Lager verfügbar. Motoren-Typen:BF4M1013E,BF4L1011T,BF4M1008(LDW1204T),F4M1008(=LDW1204) ,F3M1008(LDW903) BF4M2011,BF4M2012C/BF4-6M2013/C Hatz-Motoren:alle Typen ab Lager lieferbar:ES75/79/780/785/786/1D80/1D81 ansonsten schnelle und günstige Motor-Überholung mit 1 Jahr Garantie info@miw-zeven.de

Engine is completely overhauled with turbocharger in exchange. Price only on request

We offer from stock zzügl. Packaging+Freight to: Timing belt 113 teeth a 42,-/piece Cylinder head LDW1204/1204T/1404 net 840,-/piece all prices to the tax mail= info@miw-zeven.de

1972, COIL WEIGHT: 32 TON, THICKNESS: 0.8 - 8.0 MM, WIDTH: 1500 MM MAX., MAX. LENGTH OF THE PLATE: 12 000 MM

New engine for exchange info@miw-zeven.de

Dimensions: 1.5 m x 4.2 m x 1.5 m (approx. WxLxH) H without WT (WT=1.5 x 1.5 x 1.5 m) Heating unit: 267 kW Brenner : Gas burner, make ELCO Exhaust fireplace : stainless steel, single-walled, diameter 250 Supply air unit: 22,800 m3/h; 7.5 kW; n = 960 rpm Exhaust unit: 22,500 m3/h; 7.5 kW; n = 960 rpm Piping : Supply and exhaust air pipes, deflector hood Electrics : Control cabinet, frequency inverter control with speed control This unit set has already been sold! However, we will soon get a similar aggregate set back in. Please contact us. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

1 x NEW 'Bainite' (India) Make 1000mm (42in) wide x 400mm (16in) dia two roll mill, Hydraulic nip adjustment (dual acting cylinders), Peripherally drilled chilled cast iron rolls (Hardness 65/72 Shore), with anti friction roller bearings, Friction ratio 1:1.08, Hinged guide plates, Lubrication system comprising pneumatic intensifier with grease reservoir, Electro pneumatic brake with power fail safe mechanism. Safety bars fitted to front and rear. Compact right angle drive with 45kW Siemens AC variable speed squirrel cage motor through heavy duty helical design direct drive reduction gearbox (SF 2), Back roll speed 18rpm/front roll 16.6rpm. All mounted on a compact design fabricated steel bedplate. Stainless steel tray underneath. Including electrical controls comprising Siemens G130 VFD drive and S7-1200 plc with HMI. CE marked, with full Technical file, Documentation and S ...

KSB Wilo, Grundfos, Allweiler pumps in stock. Incl. VFD,. from 1KW to 37KW, 1m / h up to 350m / h designation, see list.

Eurolux Beer Tank/ Storage Tank/ Pressure Tank 400 litres with cooling jacket in AISI 304, working pressure: +2,0 bar NEW Eurolux Beer Tank/ Storage Tank/ Pressure Tank 400 litres with cooling jacket in AISI 304, working pressure: +2,0 bar NEW

Eurolux Beer Tank/ Storage Tank/ Pressure Tank 1000 Litres with cooling jacket in AISI 304, working pressure: +2,0 bar NEW Pillow Plate Inside Operating pressure:: +3,0 bar +2,0 bar Test pressure: +5,2 bar + 3,4 bar Operation vacuum: -0,15 bar - 0,15 bar Operation temperature: -10/+80°C -10/+130°C Material: V2A - AISI 304, 1.4301 Surface: pickled, passivated and neutralized Upper Bottom: - strong stackable crown - manhole lid round Ø 400 mm with 2 x handle - 1 x thread connection DN 50 with blind cap - 1 x overpressure valve - 1 x CO² venting valve - 6 x cap screws Cylindrical Body: - with cooling jacket 843 mm - connections for cooling jacket on the back inlet 1/2, outlet 1/2  ...

VA Tube Bundle WT Manufacturer: E. Gessner AG, built 1982, material 1.4465, 1.4571, Dimensions: Diameter Coat: 600mm Effective Length Pipes: 5000mm Di-inner tube: 20mm Da inner tube: 24mm Total length 5880mm Total height: 1000mm Connections Coat: DN 200 Connections Pipe side DN 50 Foot distance (holes) 3000mm Transmission area: 65m2 / 78m2 (indoor/outdoor) 208 inner tubes Ab. Pressures: -1 / 3 bar inner tubes -1 / 6bar coat Temp range: -10 / +200 Price refers to a heat exchanger. 2 present

1 factory-tested, very well-preserved single-girder crane Lifting capacity 3,200 kg Span approximately 6,000 mm hook path Max 12,000 mm Make DEMAG Year of production/workshop test 1993/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist CA. 1.0/6.3 m / min trolley gear approx. 14.0 m / min crane chassis 10.0/40.0 m / min

1 factory-tested, well preserved double girder crane Load capacity 5000 kg Span width 14.780 mm Hook path maximum approx. 8,000 mm Make RÖTTGER/Demag Workshop examination 2016 Floor control freely movable with DEMAG double girder trolley, Working speeds: Hoist approx. 0.8/8.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 14,200 mm Hook path about 8.000 mm Fabrikat DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 19.134 mm Hook path about 8.000 mm Fabrikat ABUS/DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

2 factory-tested, well preserved single girder cranes Payload 7000 kg Wingspan approx. 16.650 mm Hook way approx. 4,000 mm Fabrikat DEMAG/MAN-SWF Workshop tests 1987/1991/2016 Cranes equipped with DEMAG and SWF monorail trolleys with short design, freely movable floor control Working speeds: Hoist CA. 0.3/3,1 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested, absolutely like new single angle crane Payload 10.000 kg Wingspan approx. 26.610 mm Hook path about 10,000 mm Make DEMAG Year of production/workshop test 2001/2016 Crane equipped with electric wire rope hoist moving on the side of the vehicle, cross and long travel frequency controlled remote control, Working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear (FU) approx. 0-30,0 m / min Crane chassis (FU) approx. 0-40.0 m / min

Qty. 1 Second-hand extrusion press including (water-hydraulic system) Mfc.: Loewy - Hydropress USA Built: TBA Force: 12,000 UST Modernised: 2011 & 2014 (new PLC and control panels) Billet dia.: 14’’ – 26’’ (355.6 – 660.4 mm) Billet length: max. 65’’ (1651 mm) The press was used for the production of pipe up to 508 mm diameter and up to 50 mm wall thickness by the current owners. In 2011 the Press was partially rebuilt at which time all valves were rebuilt with new wear components, all brass was replaced for the container and rams and the loader table was rebuilt. In 2014 all new PLC Controls and the Control Pulpit were installed. Note: The water-hydraulic system is not included in the scope of supply due the system is also using for another extrusion press.

Exchange engine overhauled without starters, alternators, incl.fuel injection-system Lombardini LDW1404/Deutz F4M1008F MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring8 D-27404 Zeven Tel:0049(0)4281-950583 Fax:0049(0)4281-950585 miw-zeven.de info@miw-Zeven.de

The LVD EHT DELTA 1250 RS TK turret punching machine was built in 1999. It is equipped with a MNC 32000 CNC control. The punching machine has a maximum pressure of 20 tons and allows the processing of a sheet with dimensions of 1250×1250 mm and a thickness of 4.5 / 6 mm. The machine performs a maximum of 650 beats per minute. The press is equipped with a hydraulic system, a turret with four stations (A, B, C, D) and a clearance adjustment sensor G8823142. Technical parameters: – CNC control: MNC 32000 – maximum pressing force: 20 tons – sheet dimensions X x Y: 1250 x 1250 mm – sheet thickness: 4.5 / 6 mm – maximum number of strokes: 650 1 / min – rated number of strokes: 300 1 / min – oil tank: 200 L – total power: 18.7 kW – engine: 11 kW – voltage: 400 V – weight: 17 tons Hydraulic System – Thick Turret: – instrumentation: station A, B, C, D  ...

Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 St. sanding width: 290 mm Sanding height max.: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 St sanding width: 190 mm Sanding height max.: 2 - 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

with gas burners Weishaupt new glass wool new stainless steel sheets New storage engine Power Max 465 kW the boiler is uberholte with gas burner Weishaupt with new glass wool new grid grate Engine re-stored Power Max 465 kW the boiler is overhauled

Special charging device with pulse device. Weight approx. 250kg! 48Volt 150 ampere. With this loader, you can regenerate old batteries. Charging for forklift battery suitable for 24 cells 48 Volt 150 Ampere very good condition First picture similar! second and third picture of the original! More used loaders 24Volt, 48Volt, 80Volt of 55 amperes up to 200 amperes at the camp, please please ask. Varta Belatron Deta Special price

Charging for forklift trucks with traction battery 80 volts Type Tebetron-E 80/190 Power connection 380Volt Power 80 Volt 190 Ampere Connection to the battery Rema 160A (see picture), other plugs available. Digitally monitored charging for saeure batteries e.g. 5PZS750 Mass approx. Height 131cm Width 55cm Depth 40cm Weight 180kg Ready to use Special price

7 stueck LORENZ or LIEBHERR Schraegfuehrungen - see picture Further: Airfilter (Euro 1000,--)

DIASORIN Liaison Type 2229 Immunodiagnostic Analyzer The LIAISON analyzer combines a flexible operating module with a wide assay menu and results in high efficiency due to its long walk-away time. The ability to perform up to 15 different assays simultaneously ensures a streamlined testing routine even with a small number of samples. The LIAISON analyzer is designed for immunoassay testing and uses "flash" chemiluminescence technology (CLIA) with a paramagnetic microparticle solid phase (MP). The LIAISON analyzer is efficient from the start, allowing continuous loading of samples, reagents and the workload can be processed in direct access or batch mode. All test methods are based on an internal master curve with 2-point calibration. Autodilution, repeat and reflex tests are performed at the operator's request and performed automatically by the system. The LIAISON system also ha ...

Web guider ElGuider, DRB1402, Erhardt+Leimer, new -40% Special price ! We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price of a similar product is about € 4.300. If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 100 hours. ELGUIDER - DRB1402 Rotary frame system Profinet with rotary frame DR 1401 in compact version for the control of a running web, with digital position controller and brushless actuator, Control frame for D100 rollers, - Size: Size 2, - Nominal width NB: 250 mm, - transfer length LUE: 250 mm - Sensor: FX 46 ultrasonic sensor, - Incl. existing cables - Sensor adjustment: Manual, Standard, - F ...

Hi, I offer you Hydraulic power pack-three engines 90 KW each -oil tank 4500l, -Each engine drives two hydraulic pump gear -Pump Model 45V60A Power supply power to the extruder scrap shears in the set are three Dimensions chydrauliczne 160x190 coolers coolers 3 x -cooling connection 100 mm -power connection 80 mm Very Good Condition Net price: 59900 $-€14000 contact: + 48 600-517-834

LeoMat Digitakt 330 SFR – Slitter/Rewinder/UV-Flexo/Laminating  Year of manufacture: 2011  Servo drive  Job memory up to 50 jobs  Register control: Semi- and fully rotary  electronic motor control  Electronic web edge control  Waste and misprint stop  Unwind shaft: d=76mm  Unwind diameter: 700mm  Rewind shaft: d=76mm  Rewind diameter: 550mm  Automatic web stop at machine stop  Flexo printing unit GALLUS EM 340  Web width: 340mmm  Cliché 1.14mm  Fully rotary register control including servo drive  Die-cutting and printing of materials  UV drying  Web width: 410mm  Laminating  Pressure station mounted on printing cylinder  Punching unit LeoMat L  Adaptation of the GALLUS R250 magnetic cylinder  Rotometrics impression cylinder  Grid rewind servo driven  Integrated edge trim sucti ...

Model L126TI No. of Cyl. L6 Aspiration TI Displacement (Liter) 11.1 Bore x Stroke (mm) 123x155 Output (ISO 3046, 8528 kW(ps)/rpm) 265(360) / 2000 - Dimension (L×W×H) 1235x855x1073 Dry Weight (kg) 1,060 Emission TIER-2

Storage Tank / Beer Tank/ Pressure Tank in AISI 304 Operating pressure: 0,99 bar , Test pressure: 1,7 bar Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Top Bottom: with pressure lid 390 mm with 1 x thread connection DN 50 with 1 x overpressure valve with 1 x CO² connection with 6 x screws with 10 x reinforcing rings for better pressure resistance Lower Bottom: with outlet DN 50 with butterfly valve on 4 stable feets can be moved from all sides with a forklift / truck pallet Diameter: 1000 Total height: 1740 Zyl. Height: 900 Weight: 135